• SMD page (MAIN MENU)
• NATIONAL STANDARDS PAGE
• MS APPROVED (2008)

MALAYSIAN STANDARDS APPROVED ON 10/04/2008 BY THE MINISTRY

OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE

WITH THE STANDARDS OF MALAYSIA ACT (ACT 549)

New Malaysian Standard

[Adopted/MOD/IDT]

No.		Project No.	Malaysian Standard Number and Title		Remarks
1.	06F005R0 i		MS ISO 11621:2008 GAS CYLINDERS - PROCEDURES OF CHANGE OF GAS SERVICE	This standard is identical with ISO 11621:1997
2.	06F111R0 i		MS ISO 13769:2008 GAS CYLINDERS - STAMP MARKING	This standard is identical with ISO 13769:2002
3.	06F226R0 i		MS ISO 11114-1:2008 TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS	This standard is identical with ISO 11114-1:1999
4.	07F018R0		MS ISO 4161:2008 HEXAGON NUTS WITH FLANGE - COARSE THREAD (ISO 4161:1999, IDT)	This standard is identical with ISO 4161: 1999 Hexagon nuts with flange - Coarse thread.
5.	07F019R0		MS ISO 4162:2008 HEXAGON BOLTS WITH FLANGE - SMALL SERIES (ISO 4162:1990, IDT)	This standard is identical with ISO 4162: 1990 Hexagon bolts with flange - Small series.
6.	07F020R0		MS ISO 8765:2008 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8765:1999, IDT)	This standard is identical with ISO 8765:1999 Hexagon head bolts with metric fine pitch thread - Product grades A and B.
7.	07F021R0		MS ISO 15072:2008 HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES - PRODUCT GRADE A (ISO 15072:1999 AND TECHNICAL CORRIGENDUM 1:2006, IDT)	This standard is identical with ISO 15072:1999 Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A
8.	07F022R0		MS ISO 15071:2008 HEXAGON BOLTS WITH FLANGE - SMALL SERIES - PRODUCT GRADE A (ISO 15071:1999 AND TECHNICAL CORRIGENDUM 1:2006, IDT)	This standard is identical with ISO 15071:1999 Hexagon bolts with flange - Small series - Product grade A
9.	07F023R0		MS ISO 10663:2008 HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD (ISO 10663:1999, IDT)	This standard is identical with ISO 10663:1999 Hexagon nuts with flange - Fine pitch thread
10.	07G007R0		MS ISO/IEC 19784-1:2008 INFORMATION TECHNOLOGY - BIOMETRIC APPLICATION PROGRAMMING INTERFACE - PART 1: BIOAPI SPECIFICATION	This standard is identical with ISO/IEC 19784-1:2006
11.	07G008R0		MS ISO/IEC 19784-2:2008 INFORMATION TECHNOLOGY - BIOMETRIC APPLICATION PROGRAMMING INTERFACE - PART 2: BIOMETRIC ARCHIVE FUNCTION PROVIDER INTERFACE	This standard is identical with ISO/IEC 19784-2:2007
12.	07G009R0		MS ISO/IEC 19785-1:2008 INFORMATION TECHNOLOGY - COMMON BIOMETRIC EXCHANGE FORMATS FRAMEWORK - PART 1: DATA ELEMENT SPECIFICATION	This standard is identical with ISO/IEC 19785-1:2006
13.	07G010R0		MS ISO/IEC 19785-2:2008 INFORMATION TECHNOLOGY - COMMON BIOMETRIC EXCHANGE FORMATS FRAMEWORK - PART 2: PROCEDURES FOR THE OPERATION OF THE BIOMETRIC REGISTRATION AUTHORITY	This standard is identical with ISO/IEC 19785-2:2006
14.	07G011R0		MS ISO/IEC 19794-1:2008 INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 1: FRAMEWORK	This standard is identical with ISO/IEC 19794-1:2006
15.	07G012R0		MS ISO/IEC 19794-3:2008 INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 3: FINGER PATTERN SPECTRAL DATA	This standard is identical with ISO/IEC 19794-3:2006
16.	07G013R0		MS ISO/IEC 19794-8:2008 INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 8: FINGER PATTERN SKELETAL DATA	This standard is identical with ISO/IEC 19794-8:2006
17.	07G014R0		MS ISO/IEC 19794-9:2008 INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 9: VASCULAR IMAGE DATA	This standard is identical with ISO/IEC 19794-9:2007
18.	07G015R0		MS ISO/IEC 24709-1:2008 INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR THE BIOMETRIC APPLICATION PROGRAMMING INTERFACE (BIOAPI) - PART 1: METHODS AND PROCEDURES	This standard is identical with ISO/IEC 24709-1:2007
19.	07G016R0		MS ISO/IEC 24709-2:2008 INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR THE BIOMETRIC APPLICATION PROGRAMMING INTERFACE (BIOAPI) - PART 2: TEST ASSERTIONS FOR BIOMETRIC SERVICE PROVIDERS	This standard is identical with ISO/IEC 24709-2:2007
20.	07H005R0		MS 2063:2008 STANDARD TEST METHOD FOR HYDROGEN SULFIDE IN LIQUEFIED PETROLEUM (LP) GASES (LEAD ACETATE METHOD)	This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
21.	07H006R0		MS 2064:2008 STANDARD TEST METHOD FOR DRYNESS OF PROPANE (VALVE FREEZE METHOD)	This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
22.	07H008R0		MS 2065:2008 STANDARD TEST METHOD FOR DENSITY OR RELATIVE DENSITY OF LIGHT HYDROCARBONS BY PRESSURE HYDROMETER	This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
23.	07H009R0		MS 2066:2008 STANDARD TEST METHOD FOR DETERMINATION OF TOTAL VOLATILE SULFUR IN GASEOUS HYDROCARBONS AND LIQUEFIED PETROLEUM GASES BY ULTRAVIOLET FLUORESCENCE	This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
24.	07H010R0		MS 2067:2008 STANDARD TEST METHOD FOR VAPOR PRESSURE OF LIQUEFIED PETROLEUM GASES (LPG) (EXPANSION METHOD)	This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
25.	07H011R0		MS 2068:2008 STANDARD TEST METHOD FOR RESIDUES IN LIQUEFIED PETROLEUM (LP) GASES	This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
26.	06L016R0		MS ISO 1081:2008 BELT DRIVES - V-BELTS AND V-RIBBED BELTS, AND CORRESPONDING GROOVED PULLEYS - VOCABULARY (ISO 1081:1995; IDT)	This standard is identical with ISO 1081:1995
27.	06L017R0		MS ISO 5288:2008 SYNCHRONOUS BELT DRIVES — VOCABULARY (ISO 5288:2001, IDT)	This standard is identical with ISO 5288:2001
28.	06L018R0		MS ISO 5292:2008 BELT DRIVES - V-BELTS AND V-RIBBED BELTS - CALCULATION OF POWER RATINGS (ISO 5292:2004; IDT)	This standard is identical with ISO 5292:2004
29.	06L023R0		MS ISO 6813:2008 ROAD VEHICLES - COLLISION CLASSIFICATION - TERMINOLOGY (ISO 6813, IDT)	This standard is identical with ISO 6813:1998
30.	06L027R0		MS ISO 6118:2008 ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 70 OC MAX.) (ISO 6118: 2006, IDT)	This standard is identical with ISO 6118:2006
31.	06L028R0		MS ISO 4928:2008 ROAD VEHICLES - ELASTOMERIC CUPS AND SEALS FOR CYLINDERS FOR HYDRAULIC BRAKING SYSTEMS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 OC MAX.) (ISO 4928:2006, IDT	This standard is identical with ISO 4928:2006
32.	07L001R0		MS ISO 6119:2008 ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 120 °C MAX.) (ISO 6119:2006, IDT)	This standard is identical with ISO 6119:2006
33.	07L002R0		MS ISO 4930:2008 ROAD VEHICLES - ELASTOMERIC SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (SERVICE TEMPERATURE 150 °C MAX.) (ISO 4930:2006, IDT)	This standard is identical with ISO 4930:2006
34.	07R003R0		MS ISO 5356-2:2008 ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS: PART 2: SCREW-THREADED WEIGHT-BEARING CONNECTORS (ISO 5356-2:2006, IDT)	This standard is identical with ISO 5356-2:2006
35.	07R004R0		MS ISO 8835-4:2008 INHALATIONAL ANAESTHESIA SYSTEMS: PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES (ISO 8835-4:2004, IDT)	This standard is identical with ISO 8835-4:2004
36.	07R005R0		MS ISO 8835-5:2008 INHALATIONAL ANAESTHESIA SYSTEMS: PART 5: ANAESTHETIC VENTILATOR (ISO 8835-5:2004, IDT)	This standard is identical with ISO 8835-5:2004
37.	07R006R0		MS 2060:2008 SMALL STEAM STERILISERS	This standard is identical with EN 13060:2004
38.	07R007R0		MS ISO/TS 18835:2008 INHALATIONAL ANAESTHESIA SYSTEMS - DRAW-OVER VAPORIZERS AND ASSOCIATED EQUIPMENT (ISO/TS 18835:2004, IDT)	This standard is identical with ISO/TS 18835:2004
39.	07R008R0		MS ISO 11195:2008 GAS MIXERS FOR MEDICAL USE - STAND-ALONE GAS MIXERS (ISO 11195:1995, IDT)	This standard is identical with ISO 11195:1995
40.	07R009R0		MS ISO 21647:2008 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 21647:2004, IDT)	This standard is identical with ISO 21647:2004
41.	07R010R0		MS ISO 5362:2008 ANAESTHETIC RESERVOIR BAGS (ISO 5362:2006, IDT)	This standard is identical with ISO 5362:2006
42.	07R011R0		MS ISO 5364:2008 ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS (ISO 5364:2001, IDT)	This standard is identical with ISO 5364:2001
43.	07R012R0		MS ISO 5367:2008 BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS (ISO 5367:2000, IDT)	This standard is identical with ISO 5367:2000
44.	07R013R0		MS ISO 14408:2008 TRACHEAL TUBES DESIGNED FOR LASER SURGERY - REQUIREMENTS FOR MARKING AND ACCOMPANYING INFORMATION (ISO 14408:2005, IDT)	This standard is identical with ISO 14408:2005
45.	07R014R0		MS ISO 8359:2008 OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS (ISO 8359:1996, IDT)	This standard is identical with ISO 8359:1996
46.	07R015R0		MS ISO 9360-1:2008 ANAESTHETIC AND RESPIRATORY EQUIPMENT - HEAT AND MOISTURE EXCHANGERS (HMES) FOR HUMIDIFYING RESPIRED GASES IN HUMANS: PART 1: HMES FOR USE WITH MINIMUM TIDAL VOLUMES OF 250 ML (ISO 9360-1:2000, IDT)	This standard is identical with ISO 9360-1:2000
47.	07R016R0		MS ISO 5356-1:2008 ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS : PART 1: CONES AND SOCKETS (ISO 5356-1:2004, IDT)	This standard is identical with ISO 5356-1:2004
48.	07Y002R0		MS ISO 10002:2008 QUALITY MANAGEMENT - CUSTOMER SATISFACTION - GUIDELINES FOR COMPLAINTS HANDLING IN ORGANIZATIONS (ISO 10002:2004, IDT) (PUBLISHED BY STANDARDS MALAYSIA IN 2007)	This standard is identical with ISO 10002:2004
49.	07Y003R0		MS ISO 10014:2008 QUALITY MANAGEMENT - GUIDELINES FOR REALIZING FINANCIAL AND ECONOMIC BENEFITS (ISO 10014:2006, IDT) (PUBLISHED BY STANDARDS MALAYSIA IN 2007)	This standard is identical with ISO 10014:2006
50.	07Y004R0		MS ISO 10019:2008 GUIDELINES FOR THE SELECTION OF QUALITY MANAGEMENT SYSTEM CONSULTANTS AND USE OF THEIR SERVICES (ISO 10019:2005, IDT) (PUBLISHED BY STANDARDS MALAYSIA IN 2007)	This standard is identical with ISO 10019:2005
51.	07Z005R0		MS ISO 14044:2008 ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006, IDT)	This standard is identical with ISO 14044: 2006
52.	07Z009R0		MS 2074:2008 PRACTICE FOR SAMPLING USING A TRIER SAMPLER	This standard is identical with ASTM D5451-93 (Reapproved 2001)
53.	07Z010R0		MS 2075:2008 PRACTICE FOR SAMPLING WITH A COMPOSITE LIQUID WASTE SAMPLER (COLIWASA)	This standard is identical with ASTM D5495-94 (2001)
54.	07Z011R0		MS 2076:2008 PRACTICE FOR SAMPLING WITH A SCOOP	This standard is identical with ASTM D5633-94 (Reapproved 2001)
55.	07Z012R0		MS 2077:2008 PRACTICE FOR SAMPLING WITH A DIPPER OR POND SAMPLER	This standard is identical with ASTM D5358-93 (Reapproved 1998)
56.	07Z013R0		MS 2078:2008 PRACTICE FOR SAMPLING SINGLE OR MULTILAYERED LIQUIDS, WITH OR WITHOUT SOLIDS, IN DRUMS OR SIMILAR CONTAINERS	This standard is identical with ASTM D5743-97(Reapproved 2003)
57.	07Z015R0		MS ISO 4225:2008 AIR QUALITY - GENERAL ASPECTS - VOCABULARY (ISO 4225:1994, IDT)	This standard is identical with ISO 4225-1994
58.	07Z016R0		MS ISO 8756:2008 AIR QUALITY - HANDLING OF TEMPERATURE, PRESSURE AND HUMIDITY DATA (ISO 8756:1994, IDT)	This standard is identical with ISO 8756:1994
59.	07Z021R0		MS ISO 4226:2008 AIR QUALITY - GENERAL ASPECTS - UNITS OF MEASUREMENT (ISO 4226:1993, IDT)	This standard is identical with ISO 4226-1993
60.	07B045R0		MS 2083:2008 ADHESIVES - WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR STRENGTH BY TENSILE LOADING (ISO 6237:2003, MOD)	This standard corresponds to ISO 6237 : 2003 Adhesives - Wood to wood adhesive bonds - Determination of shear strength by tensile loading
61.	07B046R0		MS 2084:2008 ADHESIVES- WOOD-TO-WOOD ADHESIVE BONDS - DETERMINATION OF SHEAR STRENGTH BY COMPRESSIVE LOADING	This standard corresponds to ISO 6238: 2001 Adhesives - Wood to wood adhesive bonds - Determination of shear strength by compressive loading
62.	07B047R0		MS ISO 20507:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - VOCABULARY (ISO 20507:2003, IDT)	This standard is identical with ISO 20507:2003
63.	07B048R0		MS ISO 20508:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF LIGHT TRANSMITTANCE OF CERAMIC FILMS WITH TRANSPARENT SUBSTRATE (ISO 20508:2003, IDT)	This standard is identical with ISO 20508:2003
64.	07B049R0		MS ISO 24235:2008 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF PARTICLE SIZE DISTRIBUTION OF CERAMIC POWDERS BY LASER DIFFRACTION METHOD (ISO 24235:2007, IDT)	This standard is identical with ISO 24235:2007
65.	07B060R0		MS 133: Part H6:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H6: ASSESSMENT OF DEGREE OF OF CHALKING BY TAPE METHOD (ISO 4628-6:2007, IDT)	This standard is identical with ISO 4628-6:2007
66.	07B061R0		MS 133: Part H7:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2003, IDT)	This standard is identical with ISO 4628-7:2003
67.	07B062R0		MS 133: Part H10:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H10: ASSESSMENT OF DEGREE OF FILIFORM CORROSION (ISO 4628-10:2003, IDT)	This standard is identical with ISO 4628-10:2003
68.	07B064R0		MS 133: Part F19:2008 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART F19: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2000 (2005), IDT)	This standard is identical with ISO 11997-2:2000 (2005)
69.	07B066R0		MS 133: Part J1:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING (ISO 8130-1:1992 (2007), IDT)	This standard is identical with ISO 8130-1:1992 (2007)
70.	07B069R0		MS 133: Part J4:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J4: CALCULATION OF LOWER EXPLOSION LIMIT (ISO 8130-4:1992 (2007) AND ITS CORRIGENDUM 1:1993, IDT)	This standard is identical with ISO 8130-4:1992 (2007)
71.	07B070R0		MS 133: Part J5:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J5: DETERMINATION OF FLOW PROPERTIES OF A POWDER/AIR MIXTURE (ISO 8130-5:1992 (2007), IDT)	This standard is identical with ISO 8130-5:1992(2007)
72.	07B071R0		MS 133: Part J6:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J6: DETERMINATION OF GEL TIME OF THERMOSETTING COATING POWDERS AT A GIVEN TEMPERATURE (ISO 8130-6:1992 (2007) AND ITS AMENDMENT 1:1998, IDT)	This standard is identical with ISO 8130-6:1992 (2007)
73.	07B072R0		MS 133: Part J9:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J9: SAMPLING (ISO 8130-9:1992 (2007), IDT)	This standard is identical with ISO 8130-9:1992(2007)
74.	07B073R0		MS 133: Part J7:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J7: DETERMINATION OF LOSS OF MASS ON STOVING (ISO 8130-7:1992 (2007), IDT)	This standard is identical with ISO 8130-7:1992(2007)
75.	07B075R0		MS 133: Part J11:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J11: INCLINED-PLANE FLOW TEST (ISO 8130-11:1997(2007), IDT)	This standard is identical with ISO 8130-11:1997(2007)
76.	07B076R0		MS 133: Part J13:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION (ISO 8130-13:2001 (2006), IDT)	This standard is identical with ISO 8130-13:2001 (2006)
77.	07B077R0		MS 133: Part J12:2008 PAINTS AND VARNISHES - COATING POWDERS - PART J12: DETERMINATION OF COMPATIBILITY (ISO 8130-12:1998(2003), IDT)	This standard is identical with ISO 8130-12:1998(2003)
78.	07F016R0		MS ISO 7175-1:2008 CHILDREN'S COTS AND FOLDING COTS FOR DOMESTIC USE - PART 1: SAFETY REQUIREMENTS	This standard is identical with ISO 7175-1:1997
79.	07F017R0		MS ISO 7175-2:2008 CHILDREN'S COTS AND FOLDING COTS FOR DOMESTIC USE - PART 2: TEST METHODS	This standard is identical with ISO 7175-2:1997
80.	07F027R0		MS ISO 10823:2008 GUIDELINES FOR THE SELECTION OF ROLLER CHAIN DRIVES	This standard is identical with ISO 10823:2004
81.	07F028R0		MS ISO 9098-1:2008 BUNK BEDS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TESTS - PART 1: SAFETY REQUIREMENTS	This standard is identical with ISO 9098-1:1994
82.	07F029R0		MS ISO 9098-2:2008 BUNK BEDS FOR DOMESTIC USE - SAFETY REQUIREMENTS AND TESTS - PART 2: TEST METHODS	This standard is identical with ISO 9098-2:1994
83.	07F032R0		MS ISO 8033:2008 RUBBER AND PLASTICS HOSE-DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2006, IDT)	This standard is identical with ISO 8033:2006
84.	07G027R0		MS ISO 19136:2008 GEOGRAPHIC INFORMATION-GEOGRAPHY MARKUP LANGUAGE (GML) (ISO 19136:2007,IDT)	This standard is identical with ISO 19136: 2007
85.	07G029R0		MS ISO 19132:2008 GEOGRAPHIC INFORMATION-LOCATION BASED SERVICES-REFERENCE MODEL (ISO 19132:2007,IDT)	This standard is identical with ISO 19132: 2007
86.	07G030R0		MS ISO 19137:2008 GEOGRAPHIC INFORMATION-CORE PROFILE OF THE SPATIAL SCHEMA (ISO 19137:2007,IDT)	This standard is identical with ISO 19137: 2007
87.	07G031R0		MS ISO/TS 19139:2008 GEOGRAPHIC INFORMATION-METADATA-XML SCHEMA IMPLEMENTATION (ISO/TS 19136:2006,IDT)	This standard is identical with ISO/TS 19139: 2006
88.	07G032R0		MS ISO TS 19134:2008 GEOGRAPHIC INFORMATION-BASED SERVICES- MULTIMODAL ROUTING AND NAVIGATION (ISO 19134:2007,IDT)	This standard is identical with ISO TS 19134:2007
89.	07G033R0		MS ISO/TS 19138:2008 GEOGRAPHIC INFORMATION-DATA QUALITY MEASURES (ISO/TS 19138:2006,IDT)	This standard is identical with ISO/TS 19138:2006
90.	07J028R0		MS ISO 1628-3:2008 PLASTICS — DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS —PART 3:POLYETHYLENES AND POLYPROPYLENES	This standard is identical with ISO 1628-Part 3 :2001
91.	07J029R0		MS ISO 1628-4:2008 PLASTICS — DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS — PART 4: POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS	This standard is identical with ISO 1628-Part 4:1999
92.	07J030R0		MS ISO 1628-5:2008 PLASTICS — DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS — PART 5: THERMOPLASTIC POLYESTER (TP) HOMOPOLYMERS AND COPOLYMERS	This standard is identical with ISO 1628-Part 5 :1998
93.	07J031R0		MS ISO 1628-6:2008 PLASTICS - DETERMINATION OF VISCOSITY NUMBER AND LIMITING VISCOSITY NUMBER - PART 6: METHYL METHACRYLATE POLYMERS	This standard is identical with ISO 1628-Part 6: 1990
94.	07J033R0		MS 2069:2008 PRACTICE FOR DETERMINATION OF VOLATILES IN POLYMERS BY STATIC HEADSPACE GAS CHROMATOGRAPHY	This standard is identical with ASTM D4526-96(2001)e1 - Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
95.	07T001R0		MS ISO 24801-1:2008 RECREATIONAL DIVING SERVICES- SAFETY RELATED MINIMUM REQUIREMENTS FOR THE TRAINING OF RECREATIONAL SCUBA DIVERS - PART 1: LEVEL 1- SUPERVISED DIVER	This standard is identical with ISO 24801-1: 2007
96.	07T002R0		MS ISO 24801-2:2008 RECREATIONAL DIVING SERVICES- SAFETY RELATED MINIMUM REQUIREMENTS FOR THE TRAINING OF RECREATIONAL SCUBA DIVERS - PART 2: LEVEL 2	This standard is identical with ISO 24801-2: 2007
97.	07T003R0		MS ISO 24801-3:2008 RECREATIONAL DIVING SERVICES- SAFETY RELATED MINIMUM REQUIREMENTS FOR THE TRAINING OF RECREATIONAL SCUBA DIVERS - PART 3: LEVEL 3- DIVE LEADER	This standard is identical with ISO 24801-3: 2007
98.	07T004R0		MS ISO 24803:2008 RECREATIONAL DIVING SERVICES- REQUIREMENTS FOR RECREATIONAL SCUBA DIVING SERVICE PROVIDERS	This standard is identical with ISO 24803: 2007
99.	07T005R0		MS ISO 24802-1:2008 RECREATIONAL DIVING SERVICES- SAFETY RELATED MINIMUM REQUIREMENTS FOR THE TRAINING OF SCUBA INSTRUCTORS - PART 1: LEVEL 1	This standard is identical with ISO 24802-1: 2007
100.	07W001R0		MS ISO 13856-3:2008 SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES PART 3: GENERAL PRINCIPLE FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES (ISO 13856-3:2006, IDT)	This standard is identical with ISO 13856-3:2006 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principle for the design and testing of pressure-sensitive bumpers
101.	07Z023R0		MS ISO 16000-6:2008 INDOOR AIR - PART 6 : DETERMINATION OF VOLATILE ORGANIC COMPOUNDS IN INDOOR AND TEST CHAMBER AIR BY ACTIVE SAMPLING ON TENAX TA SORBENT, THERMAL DESORPTION AND GAS CHROMATOGRAPHY (ISO 16000-6: 2004, IDT) (ISO 16000 - 6: 2004, IDT)	This standard is identical with ISO 16000-6:2004
102.	07Z024R0		MS ISO 16000-8:2008 INDOOR AIR - PART 8: DETERMINATION OF LOCAL MEANS OF AGES OF AIR IN BUILDINGS FOR CHARACTERIZING VENTILATION CONDITIONS (ISO 16000 - 8: 2007, IDT)	This standard is identical with ISO 16000-8: 2007 Indoor air -- Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions
103.	07Z028R0		MS 2079:2008 PRACTICES FOR DECONTAMINATION OF FIELD EQUIPMENT USED AT WASTE SITES	This standard is identical with ASTM D 5088- 02
104.	07F035R0		MS ISO 4672:2008 RUBBER AND PLASTICS HOSES-SUB-AMBIENT TEMPERATURE FLEXIBILITY TESTS (ISO 4672:1997, IDT)	This standard is identical with ISO 4672:1997 Rubber and plastics hoses-Sub-ambient temperature flexibility tests

New Malaysian Standard

[Adapted/Indigenous]

No.	Project No.	Malaysian Standard Number and Title	Remarks
1.	04J036R0	MS 1086: Part 3:2008 POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY – PART 3: FITTINGS	This Malaysian Standard is a new standard.
2.	04J037R0	MS 1086: Part 4:2008 POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY – PART 4: VALVES	This Malaysian Standard is a new standard.
3.	04J038R0	MS 1086: Part 5:2008 POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY – PART 5: FITNESS FOR PURPOSE OF THE SYSTEM	This Malaysian Standard is a new standard.
4.	04J039R0	MS 1086: Part 6:2008 POLYETHYLENE (PE) PIPING SYSTEMS FOR GASEOUS FUELS SUPPLY – PART 6: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY	This Malaysian Standard is a new standard.
5.	06Z001R0	MS 2073:2008 ECO-LABELLING CRITERIA FOR ENVIRONMENTALLY DEGRADABLE PLASTICS PACKAGING MATERIAL	This Malaysian Standard is a new standard.
6.	07Z008R0	MS 2072:2008 GUIDELINES FOR DEVELOPING AND IMPLEMENTING EARLY ACTION FOR SITE REMEDIATION	This Malaysian Standard is a new standard.
7.	07Z014R0	MS 2070: Part 2:2008 SCHEDULED WASTE - SAMPLING TECHNICAL GUIDE - PART 2: DESCRIPTION OF MEDIA AND DEVICE SELECTION GUIDE	This Malaysian Standard is a new standard.
8.	06L025R0	MS 1944 Part 3:2008 PASSENGER CAR - TEST TRACK FOR A SEVERE LANE-CHANGE MANOEUVRE – PART 3: VEHICLE PREPARATION PRIOR TO TESTING	This Malaysian Standard is a new standard.
9.	06Z010R0	MS 2080:2008 ECOLABELING CRITERIA FOR RECYCLED PAPER	This Malaysian Standard is a new standard.

Revised Malaysian Standard

No.	Project No.	Malaysian Standard Number and Title	Remarks
1.	07H003R1	MS ISO 6978-1:2008 NATURAL GAS - DETERMINATION OF MERCURY - PART 1: SAMPLING OF MERCURY BY CHEMISORPTION ON IODINE	This standard is the 1st Revision of MS ISO 6978 : 1996. This standard is identical with ISO 6978-1:2003
2.	07H004R1	MS ISO 6978-2:2008 NATURAL GAS - DETERMINATION OF MERCURY - PART 2: SAMPLING OF MERCURY BY AMALGAMATION ON GOLD/PLATINUM ALLOY	This standard is the 1st Revision of MS ISO 6978 : 1996. This standard is identical with ISO 6978-2:2003
3.	06M001R1	MS 1746: Part 1:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 1: GENERAL REQUIREMENTS (FIRST REVISION) (ISO 14520-1:2006, MOD)	This standard is the 1st Revision of MS 1746:2004. This standard is identical with ISO 14520-1:2006 Gaseous fire-extinguishing systems - Physical properties and system design - Part 1: General requirements
4.	06M002R1	MS 1746: Part 8:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 8: HFC 125 EXTINGUISHANT (FIRST REVISION) (ISO 14520-8:2006, IDT)	This standard is the 1st Revision of MS ISO 14520-8:2004. This standard is identical with ISO 14520-8:2006 Gaseous fire-extinguishing systems - Physical properties and system design - Part 8: HFC 125 extinguishant
5.	06M003R1	MS 1746: Part 9:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 9: HFC 227EA EXTINGUISHANT (FIRST REVISION) (ISO 14520-9:2006, IDT)	This standard is the 1st Revision of MS ISO 14520-9:2004. This standard is identical with ISO 14520-9:2006 Gaseous fire-extinguishing systems - Physical properties and system design - Part 9: HFC 227ea extinguishant
6.	06M004R1	MS 1746: Part 10:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 10: HFC 23 EXTINGUISHANT (FIRST REVISION) (ISO 14520-10:2005, IDT)	This standard is the 1st Revision of MS ISO 14520-10:2004. This standard is identical with ISO 14520-10:2005 Gaseous fire-extinguishing systems - Physical properties and system design - Part 10: HFC 23 extinguishant
7.	06M005R1	MS 1746: Part 11:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 11: HFC 236FA EXTINGUISHANT (FIRST REVISION) (ISO 14520-11:2005, IDT)	This standard is the 1st Revision of MS ISO 14520-11:2004. This standard is identical with ISO 14520-11:2005 Gaseous fire-extinguishing systems - Physical properties and system design - Part 11: HFC 236fa extinguishant
8.	06M006R1	MS 1746: Part 12:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 12: IG-01 EXTINGUISHANT (FIRST REVISION) (ISO 14520-12:2005, IDT)	This standard is the 1st Revision of MS ISO 14520-12:2004.. This standard is identical with ISO 14520-12:2005 Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-01 extinguishant
9.	06M007R1	MS 1746: Part 13:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 13: IG-100 EXTINGUISHANT (FIRST REVISION) (ISO 14520-13:2005, IDT)	This standard is the 1st Revision of MS ISO 14520-13:2004.. This standard is identical with ISO 14520-12:2005 Gaseous fire-extinguishing systems - Physical properties and system design - Part 12: IG-100 extinguishant
10.	06M008R1	MS 1746: Part 14:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 14: IG-55 EXTINGUISHANT (FIRST REVISION) (ISO 14520-14:2005, IDT)	This standard is the 1st Revision of MS ISO 14520-14:2004. This standard is identical with ISO 14520-14:2005 Gaseous fire-extinguishing systems - Physical properties and system design - Part 14: IG-55 extinguishant
11.	06M009R1	MS 1746: Part 15:2008 GASEOUS FIRE-EXTINGUISHING SYSTEMS - PHYSICAL PROPERTIES AND SYSTEM DESIGN - PART 15: IG-55 EXTINGUISHANT (FIRST REVISION) (ISO 14520-15:2005, IDT)	This standard is the 1st Revision of MS ISO 14520-15:2004. This standard is identical with ISO 14520-15:2005 Gaseous fire-extinguishing systems - Physical properties and system design - Part 15: IG-541 extinguishant
12.	07H007R2	MS 875:2008 STANDARD TEST METHOD FOR SULFUR IN LIQUEFIED PETROLEUM GASES (OXY-HYDROGEN BURNER OR LAMP)	This standard is the 2nd Revision of MS 875:.2001 This standard is identical with ASTM D 1835-05 Specification for Liquefied (LP) Gases
13.	07B055R1	MS 133: Part H1:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (FIRST REVISION) (ISO 4628-1:2003, IDT)	This standard is the 1st Revision of MS 133: Part H1:1987. This standard is identical with ISO 4628-1:2003
14.	07B056R1	MS 133: Part H4:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H4: ASSESSMENT OF DEGREE OF CRACKING (FIRST REVISION) (ISO 4628-4:2003, IDT)	This standard is the 1st Revision of MS 133: Part H4:1987. This standard is identical with ISO 4628-4:2003
15.	07B057R1	MS 133: Part H2:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H2: ASSESSMENT OF DEGREE OF BLISTERING (FIRST REVISION) (ISO 4628-2:2003, IDT)	This standard is the 1st Revision of MS 133: Part H2:1987. This standard is identical with ISO 4628-2:2003
16.	07B058R1	MS 133: Part H3:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H3: ASSESSMENT OF DEGREE OF RUSTING (FIRST REVISION) (ISO 4628-3:2003, IDT)	This standard is the 1st Revision of MS 133: Part H3:1989. This standard is identical with ISO 4628-3:2003
17.	07B059R1	MS 133: Part H5:2008 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART H5: ASSESSMENT OF DEGREE OF FLAKING (FIRST REVISION) (ISO 4628-5:2003, IDT)	This standard is the 1st Revision of MS 133: Part H5:1987. This standard is identical with ISO 4628-5:2003
18.	07B065R1	MS 133: Part F6:2008 PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - PART F6: EXPOSURE AND ASSESSMENT (FIRST REVISION) (ISO 2810:2004, IDT)	This standard is the 1st Revision of MS 133: Part F6:1985. This standard is identical with ISO 2810:2004
19.	07W002R1	MS ISO 13849-1:2008 SAFETY OF MACHINERY - SAFETY -RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (FIRST REVISION) (ISO 13849-1:2006, IDT)	This standard is the 1st Revision of . This standard is identical with ISO 13849-1:2006 Safety of machinery- Safety-related parts of control systems - Part 1:General principles for design. The revised Malaysian Standard cancels and replaces MS ISO 13849-1:2003
20.	07W003R1	MS ISO 13850:2008 SAFETY OF MACHINERY - EMERGENCY STOP - PRINCIPLES FOR DESIGN (ISO 13850:2006, IDT) (FIRST REVISION)	This standard is the 1st Revision of . This standard is identical with ISO 13850:2006 Safety of machinery- Emergency stop - Principles for design. The revised Malaysian Standard cancels and replaces MS ISO 13850:2003
21.	07F026R2	MS ISO 606:2008 SHORT-PITCH TRANSMISSION PRECISION ROLLER AND BUSH CHAINS, ATTACHMENTS AND ASSOCIATED CHAIN SPROCKETS (SECOND REVISION)	This standard is the 2nd Revision of MS 521:1986. This standard is identical with MS 521:1986

WITHDRAWN

Malaysian Standard

No.	MS No.	Title	Remarks
1.	MS ISO 5269-1:2004	Pulps – Preparation of laboratory sheets for physical testing – Part 1: Conventional sheet-former method	Diganti dengan versi terbaru standard ISO dengan tajuk yang sama iaitu ISO 5269-1:2005 Diluluskan oleh ISC B pada 17 Oktober 2007.
2.	MS ISO 2758:1999	Paper – Determination of bursting strength	Diganti dengan versi terbaru standard ISO dengan tajuk yang sama iaitu ISO 2758:2001 Diluluskan oleh ISC B pada 17 Oktober 2007
3.	MS ISO 2759:1999	Board – Determination of bursting strength	Diganti dengan versi terbaru standard ISO dengan tajuk yang sama iaitu ISO 2759:2001 Diluluskan oleh ISC B pada 17 Oktober 2007
4.	MS 1039:1986	Specification for alternating current switches of rated voltage above one kV	Diganti dengan versi terbaru standard IEC dengan tajuk yang sama iaitu MS IEC 60265-1:2006 Diluluskan oleh ISC E pada 2 November 2007.