List of FDMS to be submitted to DSM (IDT)

MALAYSIAN STANDARDS APPROVED ON 23/07/2008 BY THE MINISTRY

OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE

WITH THE STANDARDS OF MALAYSIA ACT (ACT 549)

New Malaysian Standard

[Adopted/MOD/IDT]

No.	Project No.	Malaysian Standard Number and Title	Remarks
1.	07E019R0	MS IEC 62271-209:2008 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 209: CABLE CONNECTIONS FOR GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV - FLUID-FILLED AND EXTRUDED INSULATION CABLES - FLUID-FILLED AND DRY-TYPE CABLE TERMINATIONS (IEC 62271-209:2	This standard is identical with IEC 62271-209:2007 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable terminations
2.	07E020R0	MS IEC 60060-1:2008 HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS (IEC 60060-1:1989, IDT)	This standard is identical with IEC 60060-1:1989
3.	07E021R0	MS IEC 60060-2:2008 HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS (IEC 60060-2:1994 AND AMENDMENT 1:1996, IDT)	This standard is identical with IEC 60060-2:1994
4.	07E022R0	MS IEC 60060-3:2008 HIGH-VOLTAGE TEST TECHNIQUES - PART 3: DEFINITIONS AND REQUIREMENTS FOR ON-SITE TESTING (IEC 60060-3:2006, IDT)	This standard is identical with IEC 60060-3:2006
5.	06E095R0	MS IEC 60068-2-1:2008 ENVIRONMENTAL TESTING - PART 2-1: TESTS. TESTS A: COLD (IEC 60068-2-1:2007, IDT)	This standard is identical with IEC 60068-2-1:2007 Environmental Testing - Part 2-1: Tests. Tests A: Cold
6.	06E103R0	MS IEC 60068-2-11:2008 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS. TEST KA: SALT MIST (IEC 60068-2-11:1981, IDT)	This standard is identical with IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2: Tests. Test Ka: Salt mist
7.	06E104R0	MS IEC 60068-2-13:2008 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST M: LOW AIR PRESSURE (IEC 60068-2-13:1983, IDT)	This standard is identical with IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2: Tests. Test M: Low air pressure
8.	07S003R0	MS IEC 60068-2-14:2008 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST N: CHANGE TEMPERATURE (IEC 60068-2-14:1984 AND AMENDMENT 1:1986, IDT)	This standard is identical with IEC 60068-2-14:1984 Basic environmental testing procedures - Part 2: Tests - Test N: Change of temperature and Amendment 1:1986
9.	07S011R0	MS IEC 60068-2-44:2008 ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON TEST T: SOLDERING (IEC 60068-2-44: 1995 AND AMENDMENT 1:1995, IDT)	This standard is identical with IEC 60068-2-44: 1995 Environmental testing - Part 2: Tests - Guidance on Test T: Soldering and Amendment 1:1995
10.	07S020R0	MS IEC 60068-2-54:2008 ENVIRONMENTAL TESTING - PART 2-54: TESTS - TEST TA: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS BY THE WETTING BALANCE METHOD (IEC 60068-2-54: 2006, IDT)	This standard is identical with IEC 60068-2-54: 2006 Environmental testing - Part 2: Tests - Test Ta: Soldering - Solderability testing by the wetting balance method
11.	07S021R0	MS IEC 60068-2-58:2008 ENVIRONMENTAL TESTING - PART 2-58: TESTS - TEST TD: TEST METHODS FOR SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (IEC 60068-2-58: 2005, IDT)	This standard is identical with IEC 60068-2-58: 2005 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability
12.	07S022R0	MS IEC 60068-2-69:2008 ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS FOR SURFACE MOUNTING DEVICES BY THE WETTING BALANCE METHOD (IEC 60068-2-69: 2007, IDT)	This standard is identical with IEC 60068-2-69: 2007 Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices by the wetting balance method
13.	07S023R0	MS IEC 60068-3-1:2008 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 3: BACKGROUND INFORMATION - SECTION ONE: COLD AND DRY HEAT TESTS (IEC 60068-3-1:1974, IDT)	This standard is identical with IEC 60068-3-1:1974 Basic environmental testing procedures - Part 3: Background information - Section One: Cold and dry heat tests
14.	07S024R0	MS IEC 60068-3-4:2008 ENVIRONMENTAL TESTING - PART 3-4: SUPPORTING DOCUMENTATION AND GUIDANCE - DAMP HEAT TESTS (IEC 60068-3-4:2001, IDT)	This standard is identical with IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
15.	07S025R0	MS IEC 60068-2-30:2008 ENVIRONMENTAL TESTING - PART 2-30: TESTS - TEST DB: DAMP HEAT, CYCLIC (12 H + 12 H CYCLE) (IEC 60068-2-30:2005, IDT)	This standard is identical with IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat
16.	07S026R0	MS IEC 60068-2-39:2008 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST Z/AMD: COMBINED SEQUENTIAL COLD, LOW AIR PRESSURE, AND DAMP HEAT TEST (IEC 60068-2-39:1976, IDT)	This standard is identical with IEC 60068-2-39:1976 Basic environmental testing procedures - Part 2: Tests - Test Z/AMD: Combined sequential cold
17.	07S027R0	MS IEC 60068-2-66:2008 ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST CX: DAMP HEAT, STEADY STATE (UNSATURATED PRESSURIZED VAPOUR) (IEC 60068-2-66:1994, IDT)	This standard is identical with IEC 60068-2-66:1994 Environmental testing - Part 2: Tests methods - Test Cx: Damp heat
18.	07S031R0	MS IEC 60068-2-67:2008 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST CY: DAMP HEAT, STEADY STATE, ACCELERATED TEST PRIMARILY INTENDED FOR COMPONENTS (IEC 60068-2-67:1995, IDT)	This standard is identical with IEC 60068-2-67:1995
19.	07S032R0	MS IEC 60068-2-78:2008 ENVIRONMENTAL TESTING - PART 2: TESTS - TEST CAB: DAMP HEAT, STEADY STATE (IEC 60068-2-78:2001, IDT)	This standard is identical with IEC 60068-2-78:2001
20.	07U010R0	MS ISO 3217:2008 OIL OF LEMONGRASS (CYMBOPOGON CITRATUS) (ISO 3217:1974, IDT)	This standard is identical with ISO 3217:1974
21.	07U011R0	MS ISO 3757:2008 OIL OF PATCHOULI (POGOSTEMON CABLIN (BLANCO) BENTH.) (ISO 3757:2002, IDT)	This standard is identical with ISO 3757:2002
22.	07U012R0	MS ISO 3848:2008 OIL OF CITRONELLA, JAVA TYPE (ISO 3848:2001, IDT)	This standard is identical with ISO 3848:2001
23.	07U013R0	MS ISO 3849:2008 OIL OF CITRONELLA, SRI LANKA TYPE (CYMBOPOGON NARDUS (L.) W. WATSON VAR. LENABATU STAPF.) (ISO 3849:2003, IDT)	This standard is identical with ISO 3849:2003
24.	07U014R0	MS ISO 4730:2008 OIL OF MELALEUCA, TERPINEN-4-OL TYPE (TEA TREE OIL) (ISO 4730:2004, IDT)	This standard is identical with ISO 4730:2004
25.	07U018R0	MS ISO 3523:2008 OIL OF CANANGA [CANANGA ODORATA (LAM.) HOOK. F. ET THOMSON, FORMA MACROPHYLLA] (ISO 3523:2002,IDT)	This standard is identical with ISO 3523:2002
26.	07U019R0	MS ISO 3524:2008 OIL OF CINNAMON LEAF, SRI LANKA TYPE (CINNAMOMUM ZEYLANICUM BLUME) (ISO 3524:2003, IDT)	This standard is identical with ISO 3524:2003
27.	04W017R0	MS 2096: Part 5:2008 PERSONAL FLOTATION DEVICES - PART 5: BUOYANCY AIDS (LEVEL 50) - SAFETY REQUIREMENTS (ISO 12402-5:2006, TECHNICAL CORRIGENDUM 1:2006, IDT)	This standard is identical with ISO 12402-5:2006
28.	04W018R0	MS 2096: Part 4:2008 PERSONAL FLOTATION DEVICES - PART 4: LIFEJACKETS, PERFORMANCE LEVEL 100 - SAFETY REQUIREMENTS (ISO 12402-4:2006, IDT)	This standard is identical with ISO 12402-4:2006
29.	04W021R0	MS 2096: Part 8:2008 PERSONAL FLOTATION DEVICES - PART 8: ACCESSORIES - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-8:2006, IDT)	This standard is identical with ISO 12402-8:2006
30.	04W121R0	MS 2096: Part 9:2008 PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS (ISO 12402-9:2006, IDT)	This standard is identical with ISO 12402-9:2006
31.	04W123R0	MS 2096: Part 7:2008 PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006, IDT)	This standard is identical with ISO 12402-7:2006
32.	04W124R0	MS 2096: Part 10:2008 PERSONAL FLOTATION DEVICES - PART 10: SELECTION AND APPLICATION OF PERSONAL FLOTATION DEVICES AND OTHER RELEVANT DEVICES (ISO 12402-10:2006, IDT)	This standard is identical with ISO 12402-10:2006
33.	08W003R0	MS ISO 20347:2008 PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR (ISO 20347:2004, TECHNICAL CORRIGENDUM 1:2005, IDT)	This standard is identical with i) ISO 20347:2004/Cor 1: 2005
34.	04W019R0	MS 2096: Part 3:2008 PERSONAL FLOTATION DEVICES - PART 3: LIFEJACKETS, PERFORMANCE LEVEL 150 - SAFETY REQUIREMENTS (ISO 12402-3:2006, MOD)	This standard corresponds to ISO 12402-3:2006
35.	04W020R0	MS 2096: Part 2:2008 PERSONAL FLOTATION DEVICES - PART 2: LIFEJACKETS, PERFORMANCE LEVEL 275 - SAFETY REQUIREMENTS (ISO 12402-2:2006, MOD)	This standard corresponds to ISO 12402-2:2006
36.	04W120R0	MS 2096: Part 1:2008 PERSONAL FLOTATION DEVICES - PART 1: LIFEJACKETS FOR SEAGOING SHIPS - SAFETY REQUIREMENTS (ISO 12402-1:2005, MOD)	This standard corresponds to ISO 12402-1:2005
37.	04W122R0	MS 2096: Part 6:2008 PERSONAL FLOTATION DEVICES - PART 6: SPECIAL PURPOSE LIFEJACKETS NAD BUOYANCY AIDS - SAFETY REQUIREMENTS AND ADDITIONAL TEST METHODS (ISO 12402-6:2006, MOD)	This standard corresponds to ISO 12402-6:2006

New Malaysian Standard

[Adapted/Indigenous]

No.	Project No.	Malaysian Standard Number and Title	Remarks
1.	03D010R0	MS 2095:2008 RADIANT BARRIER BUILDING MATERIALS	This Malaysian Standard is a new standard.
2.	06H012R0	MS 2008:2008 AUTOMOTIVE FUELS - PALM METHYL ESTERS (PME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS	This Malaysian Standard is a new standard.
3.	03K001R0	MS 1990 : Part 1:2008 MANUAL OF TEST AND CRITERIA FOR TRANSPORT OF DANGEROUS GOODS: PART 1: GENERAL INTRODUCTION	This Malaysian Standard is a new standard.
4.	03K002R0	MS 1990: Part 2:Sub - Part 1:2008 MANUAL OF TESTS AND CRITERIA FOR TRANSPORT OF DANGEROUS GOODS: PART 2: CLASSIFICATION PROCEDURES, TEST METHODS AND CRITERIA RELATING TO EXPLOSIVES OF CLASS 1: SUB ? PART 1: INTRODUCTION TO PART 2 - PURPOSE, SCOPE, ACCEPTANCE PROCEDURE, ASSIGNMENT PROCEDUR	This Malaysian Standard is a new standard.
5.	03K010R0	MS 1990: Part 2: Sub-Part 2:2008 MANUAL OF TESTS AND CRITERIA FOR TRANSPORT OF DANGEROUS GOODS: PART 2: CLASSIFICATION PROCEDURES, TEST METHODS AND CRITERIA RELATING TO EXPLOSIVES OF CLASS 1: SUB ? PART 2: TEST SERIES 1	This Malaysian Standard is a new standard.
6.	03K011R0	MS 1990:Part 2: Sub-Part 3:2008 MANUAL OF TESTS AND CRITERIA FOR TRANSPORT OF DANGEROUS GOODS: PART 2: CLASSIFICATION PROCEDURES, TEST METHODS AND CRITERIA RELATING TO EXPLOSIVES OF CLASS 1: SUB ? PART 3: TEST SERIES 2	This Malaysian Standard is a new standard.

REVISED

Malaysian Standard

No.	Project No.	Malaysian Standard Number and Title	Remarks
1.	07E023R1	MS IEC 61000-4-16:2008 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ (FIRST REVISION) (IEC 61000-4-16:2002, IDT)	This standard is the 1st Revision of MS IEC 61000-4-16:2000. This standard is identical with IEC 61000-4-16:2002 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted
2.	08W001R1	MS ISO 20344:2008 PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR (ISO 20344:2004, TECHNICAL CORRIGENDUM 1:2005, IDT) (FIRST REVISION)	This standard is the 1st Revision of MS 1598: 1998. This standard is identical with i) ISO 20344:2004/Cor 1: 2005
3.	08W002R1	MS ISO 20345:2008 PERSONAL PROTECTIVE EQUIPMENT - SAFETY FOOTWEAR (ISO 20345:2004, TECHNICAL CORRIGENDUM 1:2005, IDT) (FIRST REVISION)	This standard is the 1st Revision of MS 1599: 1998. This standard is identical with i) ISO 20345:2004/Cor 1:2005/ Cor 2: 2006

RECONFIRMATION

Malaysian Standard

No.

Malaysian Standard Number and Title

Remarks

MS 183 : 2001(2008)

SPECIFICATION FOR INDUSTRIAL SAFETY HELMET (FIRST REVISION)

Standard Malaysia tersebut di atas telah dipersetujui oleh Jawatankuasa Teknikal “Personal Safety – Protective Clothing and Equipment for Occupational Use” untuk disahkan semula kerana tidak ada perkembangan terbaru di dalam industri tempatan sejak tahun 2000an serta terminologi yang digunakan tidak berubah

RENUMBERING

Malaysian Standard

No.	Previous MS Number	Malaysian Standard Title	MS New Number
1.	MS ISO 5667: Part 16: 2007	WATER QUALITY - SAMPLING - PART 16: GUIDANCE ON BIOTESTING OF SAMPLES (ISO 5667-16:1998, IDT)	MS 1850: Part 16: 2007 Standard Malaysia ini adalah bersiri.
2.	MS ISO 5667: Part 17: 2007	WATER QUALITY - SAMPLING - PART 17: GUIDANCE ON SAMPLING OF SUSPENDED SEDIMENTS (ISO 5667-17:2000, IDT)	MS 1850: Part 17: 2007 Standard Malaysia ini adalah bersiri
3.	MS ISO 5667: Part 18: 2007	WATER QUALITY - SAMPLING - PART 18: GUIDANCE ON SAMPLING OF GROUNDWATER AT CONTAMINATED SITES (ISO 5667-18:2001, MOD)	MS 1850: Part 18: 2007 Standard Malaysia ini adalah bersiri
4.	MS 994: Part 2: 2007	MOTORCYCLE CHAINS AND SPROCKETS PART 2: MOTORCYCLE SPROCKETS – SPECIFICATION	MS 996: Part 2: 2007 Standard Malaysia ini adalah bersiri.

WITHDRAWN

Malaysian Standard

No.

MS No.

Malaysian Standard Title

Remarks

MS ISO 4007 : 2003

PERSONAL EYE-PROTECTORS - VOCABULARY

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 2051 :2007, Personal eye-protection - Vocabulary (First revision)

MS ISO 4849 : 2003

PERSONAL EYE-PROTECTORS - SPECIFICATIONS

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 2050 :2007, Personal eye-protection - Specifications (First revision)

MS ISO 4850 : 2003

PERSONAL EYE-PROTECTORS FOR WELDING AND RELATED TECHNIQUES – FILTERS – UTILISATION AND TRANSMITTANCE REQUIREMENTS

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 1957: 2006, Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use (First revision)

MS ISO 4851 : 2003

PERSONAL EYE-PROTECTORS – ULTRA-VIOLET FILTERS – UTILISATION AND TRANSMITTANCE REQUIREMENTS

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 1958: 2006, Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use (First revision)

MS ISO 4852 : 2003

PERSONAL EYE-PROTECTORS – INFRA-RED FILTERS – UTILISATION AND TRANSMITTANCE REQUIREMENTS

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 1959: 2006, Personal eye-protection - Infrared filters - Transmittance requirements and recommended use(First revision)

MS ISO 4854 : 2003

PERSONAL EYE-PROTECTORS – OPTICAL TEST METHODS

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 1955: 2006, Personal eye protection - Optical test methods (First revision)

MS ISO 4855 : 2003

PERSONAL EYE-PROTECTORS – NON-OPTICAL TEST METHODS

Standard ini ditarik balik sebagai ulangkaji dan diganti dengan standard MS 1956: 2006, Personal eye-protection - Non-optical test methods (First revision)