MALAYSIAN STANDARDS APPROVED ON 23/09/2008 BY THE MINISTRY

OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE

WITH THE STANDARDS OF MALAYSIA ACT (ACT 549)

 

 

New Malaysian Standard

 [Adopted/MOD/IDT]

 

No.

 

Project No.

 

Malaysia Standard Number and Title

Remarks

 

1.

08B001R0

MS ISO 216:2008

WRITING PAPER AND CERTAIN CLASSES OF PRINTED MATTER - TRIMMED SIZES - A AND B SERIES, AND INDICATION OF MACHINE DIRECTION

(ISO 216:2007, IDT)

 

This standard is identical with ISO 216:2007

2.

08B002R0

MS ISO 11093-6:2008

PAPER AND BOARD - TESTING OF CORES - PART 6: DETERMINATION OF BENDING STRENGTH BY THE THREE-POINT METHOD

(ISO 11093-6:2005, IDT)

 

This standard is identical with ISO 11093-6:2005

3.

08B003R0

MS ISO 11093-5:2008 

PAPER AND BOARD - TESTING OF CORES - PART 5: DETERMINATION OF CHARACTERISTICS OF CONCENTRIC ROTATION

(ISO 11093-5:1994, IDT)

 

This standard is identical with ISO 11093-5:1994

4.

08B004R0

MS ISO 11093-7:2008 

PAPER AND BOARD - TESTING OF CORES - PART 7: DETERMINATION OF FLEXURAL MODULUS BY THE THREE-POINT METHOD

(ISO 11093-7:1997, IDT)

 

This standard is identical with ISO 11093-7:1997

5.

08B005R0

MS ISO 11093-8:2008 

PAPER AND BOARD - TESTING OF CORES - PART 8: DETERMINATION OF NATURAL FREQUENCY AND FLEXURAL MODULUS BY EXPERIMENTAL MODAL ANALYSIS

(ISO 11093-8:1997, IDT)

 

This standard is identical with ISO 11093-8:1997

6.

08B006R0

MS ISO 22891:2008 

PAPER - DETERMINATION OF TRANMITTANCE BY DIFFUSE REFLECTANCE MEASUREMENT

(ISO 22891:2007, IDT)

 

This standard is identical with ISO 22891:2007

7.

08B007R0

MS ISO 3037:2008 

CORRUGATED FIBREBOARD - DETERMINATION OF EDGEWISE CRUSH RESISTANCE (UNWAXED EDGE METHOD)

(ISO 3037:2007, IDT)

 

This standard is identical with ISO 3037:2007

8.

08B008R0

MS ISO 17812:2008 

PAPER, BOARD AND PULPS - DETERMINATION OF TOTAL MAGNESIUM, TOTAL CALCIUM, TOTAL MANGANESE, TOTAL IRON AND TOTAL COPPER

(ISO 17812:2007, IDT)

 

This standard is identical with ISO 17812:2007

9.

05F010R0

MS ISO 2232:2008

ROUND DRAWN WIRE FOR GENERAL PURPOSE NON-ALLOY STEEL WIRE ROPES AND FOR LARGE DIAMETER STEEL WIRE ROPES - SPECIFICATION

(ISO 2232:1990; IDT)

 

This standard is identical with ISO 2232:1990

10.

06F026R0 i

MS ISO 13341:2008 

TRANSPORTABLE GAS CYLINDERS - FITTING OF VALVES TO GAS CYLINDERS (ISO 13341:1997, IDT)

 

This standard is identical with ISO 13341:1997

11.

06F103R0 i

MS ISO 11114-2:2008 

TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 2: NON-METALLIC MATERIALS

(ISO 11114-2:2000, IDT)

 

This standard is identical with ISO 11114-2:2000

12.

07F040R0

MS ISO 14171:2008 

WELDING CONSUMABLES - WIRE ELECTRODES AND WIRE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATIONS

(ISO 14171:2002, IDT)

 

This standard is identical with ISO 14171:2002

13.

07F041R0

MS ISO 14341:2008 

WELDING CONSUMABLES - WIRE ELECTRODES AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS -CLASSIFICATION

(ISO 14341:2002, IDT)

 

This standard is identical with ISO 14341:2002

14.

07F042R0

MS ISO 14343:2008 

WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRE AND RODS FOR FUSION WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION

(ISO 14343:2002 AND ITS AMENDMENT 1:2006, IDT)

 

This standard is identical with  ISO 14343:2002 and including its amendment 1:2006.

15.

07N009R0

MS ISO 3994:2008 

THERMOPLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS – SPECIFICATION

(ISO 3994:2007, IDT)

 

This standard is identical with ISO 3994: 2007

16.

07N010R0

MS ISO 8029:2008 

THERMOPLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED – SPECIFICATION

(ISO 8029:2007, IDT)

 

This standard is identical with ISO 8029: 2007

17.

07N012R0

MS ISO 7223:2008 

RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES - DETERMINATION OF RESISTANCE TO VACUUM

(ISO 7223: 2006, IDT)

 

This standard is identical with ISO 7223: 2006

18.

07N013R0

MS ISO 8308:2008 

RUBBER AND THERMOPLASTICS HOSES AND TUBING - DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS

(ISO 8308: 2006, IIDT)

 

This standard is identical with ISO 8308: 2006

19.

07N014R0 d

MS ISO 2878:2008 

RUBBER , VULCANIZED - ANTISTATIC AND CONDUCTIVE PRODUCTS - DETERMINATION OF ELECTRICAL RESISTANCE

(ISO 2878: 2005, IDT)

 

This standard is identical with ISO 2878: 2005

20.

07N016R0 d

MS ISO 18899:2008 

RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT

(ISO 18899: 2004, IDT)

 

This standard is identical with ISO 18899: 2004

21.

08Q002R0

MS ISO 24341:2008 

RESILIENT AND TEXTILE FLOOR COVERINGS - DETERMINATION OF LENGTH, WIDTH AND STRAIGHTNESS OF SHEET

(ISO 24341:2006, IDT)

 

This standard is identical with ISO 24341:2006

22.

08Q003R0

MS ISO 11857:2008 

TEXTILE FLOOR COVERINGS - DETERMINATION OF RESISTANCE TO DELAMINATION

(ISO 11857:1999, IDT)

 

This standard is identical with ISO 11857:1999 (confirmed 2004)

23.

08Q004R0

MS ISO 11859:2008 

TEXTILE FLOOR COVERINGS - PURE WOOL, HAND-KNOTTED PILE CARPETS - SPECIFICATION

(ISO 11859:1999, IDT)

 

This standard is identical with ISO 11859: 1999 (confirmed 2004)

24.

08Q005R0

MS ISO 11860:2008 

TEXTILE FLOOR COVERINGS - JUTE CARPET BACKING FABRIC - SPECIFICATION

(ISO 11860:1999, IDT)

 

This standard is identical with ISO 11860:1999 (confirmed 2004)

25.

08Q006R0

MS ISO 11861:2008 

TEXTILE FLOOR COVERINGS - COIR MATS - TYPES AND SPECIFICATION

(ISO 11861:1999, IDT)

 

This standard is identical with ISO 11861:1999 (confirmed 2004)

26.

08Q007R0

MS ISO 12951:2008 

TEXTILE FLOOR COVERINGS - DETERMINATION OF MASS LOSS USING THE LISSON TEST

(ISO 12951:1999, IDT)

 

This standard is identical with ISO 12951:1999 (confirmed 2007)

27.

08Q008R0

MS ISO 13747:2008 

TEXTILE FLOOR COVERINGS - DETERMINATION OF SIZE, SQUARENESS AND STRAIGHTNESS OF EDGE OF TILES

(ISO 13747:1999, IDT)

 

This standard is identical with ISO 13747:1999 (confirmed 2004)

28.

08Q009R0

MS ISO 13746:2008 

TEXTILE FLOOR COVERINGS - GUIDELINES FOR INSTALLATION AND USE ON STAIRS

(ISO 13746:2000, IDT)

 

This standard is identical with ISO 13746:2000 (confirmed 2005)

29.

08Q010R0

MS ISO 13750:2008 

TEXTILE FLOOR COVERINGS - DETERMINATION OF RESISTANCE TO STAINING BY ACID FOOD COLOURS

(ISO 13750:2000, IDT)

 

This standard is identical with ISO 13750:2000 (confirmed 2005)

30.

08Q011R0

MS ISO 17504:2008 

TEXTILE FLOOR COVERINGS - DETERMINATION OF WOOL FIBRE INTEGRITY USING AN ABRASION MACHINE

(ISO 17504:1999, IDT)

 

This standard is identical with ISO 17504:1999 (confirmed 2004)

31.

08Q012R0

MS ISO 11858:2008 

TEXTILE FLOOR COVERINGS - DETERMINATION OF FRIABILITY OF ATTACHED FOAMS

(ISO 11858:1999, IDT)

 

This standard is identical with ISO 11858:1999

_____________________________________________________________________________________________________________________

 

New Malaysian Standard

 [Adapted/Indigenous]

 

No.

 

Project No.

 

Malaysia Standard Number and Title

Remarks

1.

07A015R0

MS 2201:2008 

FRESH PITAHAYA – SPECIFICATION

 

This Malaysian Standard is a new standard.

2.

07A016R0

MS 2202:2008 

FRESH PUMMELO – SPECIFICATION

 

This Malaysian Standard is a new standard.

3.

04I002R0

MS 2200: BAHAGIAN 1:2008

BARANG GUNAAN ISLAM – BAHAGIAN 1: KOSMETIK DAN DANDANAN DIRI – GARIS PANDUAN UMUM

 

This Malaysian Standard is a new standard.

4.

04I043R0

MS 2200: PART 1:2008 

ISLAMIC CONSUMER GOODS - PART 1: COSMETIC AND PERSONAL CARE - GENERAL GUIDELINES

 

This Malaysian Standard is a new standard.

_____________________________________________________________________________________________________________________

 

REVISED

Malaysian Standard

 

No.

 

Project No.

 

Malaysia Standard Number and Title

Remarks

1.

07N011R1

MS ISO 8330:2008 

RUBBER AND THERMOPLASTIC HOSES AND HOSE ASSEMBLIES (FIRST REVISION)

This standard is the 1st Revision of MS ISO 8330:2002, Rubber and plastics hoses and hose assemblies - Vocabulary.

This standard is identical with ISO 8330: 2007

 

2.

07N015R1 d

MS ISO 3865:2008 

RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL (FIRST REVISION)

This standard is the 1st Revision of MS ISO 3865:1999, Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material.

This standard is identical with ISO 3865: 2005

 

3.

05B029R1 n

MS 995:2008 

BORON TIMBER PRESERVATIVES - SPECIFICATION

(FIRST REVISION)

 

This standard is the 1st Revision of MS 995:1986, Specification for boron timber preservatives.

4.

07J044R1 a

MS 1405:2008 

CODING SYSTEM FOR PLASTICS PRODUCTS

(FIRST REVISION)

 

This standard is the 1st Revision of MS 1405:1996.

5.

05L020R1

MS 1025:2008 

WHEEL RIMS FOR MOTORCYCLE AND ASSEMBLY - SPECIFICATION

(FIRST REVISION)

 

This standard is the 1st Revision of MS 1025:1989, Specification for wheel rims for motorcycles.

6.

07A018R4

MS 20:2008

POULTRY FEEDS - SPECIFICATION

(FOURTH REVISION)

 

This standard is the 4th Revision of MS 20.