·  SMD page (MAIN MENU)

·  NATIONAL STANDARDS PAGE

·  MS APPROVED (2009)

 

 

MALAYSIAN STANDARDS APPROVED ON 19/01/2009 BY THE MINISTRY OF SCIENCE, TECHNOLOGY AND INNOVATION IN ACCORDANCE WITH THE STANDARDS OF MALAYSIA ACT (ACT 549)

 

New Malaysian Standard

 [Adapted/Indigenous]

No.

 

Project No.

 

Malaysian Standard Number and Title

Remarks

1.

07A019R0

MS 1784-8:2009

GOOD AGRICULTURAL PRACTICE (GAP) - PART 8: HERBS

This Malaysian Standard is a new standard.

2.

08A007R0

MS 2208:2009

ANIMAL FEEDING STUFFS - CODE OF PRACTICE

This Malaysian Standard is a new standard.

3.

01D037R0 h

MS 2209:2009

STRUCTURAL LAMINATED VENEER LUMBER (LVL) - PERFORMANCE REQUIREMENTS AND MINIMUM MANUFACTURING REQUIREMENTS

This Malaysian Standard is a new standard.

4.

06E109R0

MS 2230:2009  

ELECTROMAGNETIC COMPATIBILITY - ENVIRONMENT - OVERVOLTAGES ON PUBLIC ELECTRICITY DISTRIBUTION NETWORKS

This Malaysian Standard is a new standard.

5.

07G023R0

MS 1540-2:2009

INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 2: ASSURANCE METHODS

This Malaysian Standard is a new standard.

6.

08G026R0

MS 2215:2009  

INFORMATION TECHNOLOGY - BIOMETRIC PERFORMANCE TESTING AND REPORTING - PART 3: MODALITY-SPECIFIC TESTING

This Malaysian Standard is a new standard.

7.

08G028R0

MS 2216:2009  

INFORMATION TECHNOLOGY - BIOMETRICS - MULTIMODAL AND OTHER MULTIBIOMETRIC FUSION

This Malaysian Standard is a new standard.

8.

08G029R0

MS 2217:2009  

INFORMATION TECHNOLOGY - BIOMETRICS TUTORIAL

This Malaysian Standard is a new standard.

9.

01M017R0

MS 1745: PART 14:2009  

FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 14: GUIDELINES FOR PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE

This Malaysian Standard is a new standard.

10.

07R001R0

MS 2226:2009  

MAGNETIC RESONANCE IMAGING - GUIDELINES ON SAFETY

This Malaysian Standard is a new standard.

11.

07R002R0

MS 2227:2009  

ULTRASOUND IN MEDICAL DIAGNOSTIC - CODE OF PRACTICE OF INSTALLATION, TESTING AND MAINTENANCE

This Malaysian Standard is a new standard.

12.

07R017R0

MS 2228:2009  

STRUCTURAL SHIELDING DESIGN FOR MEDICAL X-RAY IMAGING FACILITIES - GUIDELINES

This Malaysian Standard is a new standard.

13.

03A058R0

MS 2211:2009  

PLASTICS FLEXIBLE PACKAGING MATERIALS FOR PACKING OF REFINED EDIBLE OILS AND FATS SPECIFICATION

This Malaysian Standard is a new standard.

14.

03A059R0

MS 2222:2009  

PLASTIC MATERIALS AND ARTICLES INTENDED TO COME INTO CONTACT WITH FOOD

This Malaysian Standard is a new standard.

15.

06Z009R0

MS 2225:2009  

ECOLABELLING CRITERIA FOR BIODEGRADABLE CLEANING AGENTS

This Malaysian Standard is a new standard.

 

 

New Malaysian Standard

 [Adopted/MOD/IDT]]

No.

 

Project No.

 

Malaysian Standard Number and Title

Remarks

1.

08A002R0

MS ISO 17372:2009

ANIMAL FEEDING STUFFD — DETERMINATION OF ZEARALENONE BY IMMUNOAFFINITY COLUMN CHROMATOGRAPHY AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 17372:2008, IDT)

This standard is identical with ISO 17372: 2008

2.

08A006R0

MS ISO 13906:2009 

ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS

This standard is identical with ISO 13906: 2008

3.

**05B010R0

MS 1880-2:2009 

SOIL QUALITY - VOCABULARY PART 2: TERMS AND DEFINITIONS RELATING TO SAMPLING (ISO 11074:2005, MOD)

This standard corresponds to ISO 11074-2 :1998 Soil quality - Vocabulary - Part 2:Terms and definitions relating to sampling.

4.

08B025R0

MS 1850-14:2009 

WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE OF ENVIRONMENTAL WATER SAMPLING AND HANDLING (ISO 5667- 14: 1998, IDT)

This standard is identical with ISO 5667- 14: 1998

5.

08B054R0

MS ISO 9455-1:2009 

SOFT SOLDERING FLUXES - TEST METHODS - PART 1: DETERMINATION OF NON-VOLATILE MATTER, GRAVIMETRIC METHOD (ISO 9455-1:1990, IDT)

This standard is identical with ISO 9455-1:1990

6.

08B055R0

MS ISO 9455-2:2009 

SOFT SOLDERING FLUXES - TEST METHODS - PART 2: DETERMINATION OF NON-VOLATILE MATTER, EBULLIOMETRIC METHOD (ISO 9455-2:1993, IDT)

This standard is identical with ISO 9455-2:1993 Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter

7.

08B056R0

MS ISO 9455-3:2009 

SOFT SOLDERING FLUXES - TEST METHODS - PART 3: DETERMINATION OF ACID VALUE, POTENTIOMETRIC AND VISUAL TITRATION METHOD (ISO 9455-3:1992, IDT)

This standard is identical with ISO 9455-3:1992 Soft soldering fluxes - Test methods - Part 3: Determination of acid value

8.

08B057R0

MS ISO 9455-5:2009 

SOFT SOLDERING FLUXES - TEST METHODS - PART 5: COPPER MIRROR TEST (ISO 9544-5:1992, IDT)

This standard is identical with ISO 9455-5:1992 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (Confirmed in 2005)

9.

08B058R0

MS ISO 9455-6:2009 

SOFT SOLDERING FLUXES - TEST METHODS - PART 6: DETERMINATION AND DETECTION OF HALIDE (EXCLUDING FLUORIDE) CONTENT (ISO 9455-6:1995, IDT)

This standard is identical with ISO 9455-6:1995 Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (Confirmed in 2005)

10.

07E010R0

MS IEC 61194:2009 

CHARACTERISCTIC PARAMETERS OF STAND-ALONE PHOTOVOLTAIC (PV) SYSTEMS (IEC 61194:1992, IDT)

This standard is identical with IEC 61194:1992

11.

**07E011R0

MS 62257-1:2009 

RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION

This standard corresponds to IEC/TS 62257-1:2003

12.

**07E012R0

MS 62257-2:2009 

RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 2: FROM REQUIREMENTS TO A RANGE OF ELECTRIFICATION SYSTEMS

This standard corresponds to IEC/TS 62257-2:2004

13.

**07E013R0

MS 62257-3:2009 

RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT

This standard corresponds to IEC/TS 62257-3:2004

14.

**07E014R0

MS 62257-4:2009 

RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 4: SYSTEM SELECTION AND DESIGN

This standard corresponds to IEC/TS 62257-4:2005

15.

07E017R0

MS IEC 62124:2009 

PHOTOVOLTAIC (PV) STAND-ALONE SYSTEMS - DESIGN VERIFICATION (IEC 62124:2004, IDT)

This standard is identical with IEC 62124:2004

16.

07F039R0

MS ISO 15630-3:2009 

STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL (ISO 15630-3:2002, IDT)

This standard is identical with ISO 15630-3:2002

17.

08F007R0

MS ISO 6506-4:2009 

METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 4: TABLE OF HARDNESS VALUES (ISO 6506-4:2005, IDT)

This standard is identical with ISO 6506-4:2005

18.

08F012R0

MS ISO 4545-4:2009 

METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 4: TABLE OF HARDNESS VALUES (ISO 4545-4:2005, IDT)

This standard is identical with ISO 4545-4:2005

19.

08F014R0

MS 2212:2009 

PRODUCTION AND EVALUATION OF FIELD METALLOGRAPHIC REPLICAS - STANDARD PRACTICE

This standard is identical with ASTM E 1351-01

20.

08F015R0

MS 2213:2009 

PREPARATION OF METALLOGRAPHIC SPECIMENTS - STANDARD GUIDE

This standard is identical with ASTM E 3-01

21.

08G016R0

MS ISO 17115:2009 

HEALTH INFORMATICS - VOCABULARY FOR TERMINOLOGICAL SYSTEMS (ISO 17115:2007, IDT)

This standard is identical with ISO 17115:2007

22.

08G017R0

MS IEC 62304:2009 

MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES (IEC 62304:2006, IDT)

This standard is identical with IEC 62304:2006

23.

08G048R0

MS ISO/IEC 13818-1:2009 

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES AND ASSOCIATED AUDIO INFORMATION: SYSTEMS (ISO/IEC 13818-1:2007, IDT)

This standard is identical with ISO/IEC 13818-1:2007

24.

08G049R0

MS ISO/IEC 13818-2:2009 

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES AND ASSOCIATED AUDIO INFORMATION: VIDEO (ISO/IEC 13818-2:2000, IDT)

This standard is identical with ISO/IEC 13818-2:2000

25.

08G050R0

MS ISO/IEC 13818-3:2009 

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES ABD ASSOCIATED AUDIO INFORMATION - PART 3: AUDIO (ISO/IEC 13818-3:1998, IDT)

This standard is identical with ISO/IEC 13818-3:1998

26.

08G052R0

MS ISO/IEC 13818-4:2009 

INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES AND ASSOCIATED AUDIO INFORMATION - PART 4: CONFORMANCE TESTING (ISO/IEC 13818-4:2004, IDT)

This standard is identical with ISO/IEC 13818-4:2004

27.

07L021R0

MS ISO 8092-4:2009 

ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 4: PINS FOR SINGLE- AND MULTI-POLE CONNECTIONS - DIMENSIONS AND SPECIFIC REQUIREMENTS (ISO 8092-4:1997, IDT)

This standard is identical with ISO 8092-4:1997

28.

07L022R0

MS ISO 13476:2009 

ROAD VEHICLES - IGNITION COILS - ELECTRICAL CHARACTERISTICS AND TEST METHODS AND ITS TECHNICAL CORRIGENDUM 1 (ISO 13476:1997, IDT)

This standard is identical with ISO 13476:1997

29.

07L029R0

MS ISO 8092-3:2009 

ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 3: TABS FOR MULTI-POLE CONNECTIONS - DIMENSIONS AND SPECIFIC REQUIREMENTS (ISO 8092-3:1996, IDT)

This standard is identical with ISO 8092-3:1996

30.

08L008R0

MS ISO 254:2009 

BELT DRIVES - PULLEYS - QUALITY, FINISH AND BALANCE (ISO 254:1998, IDT)

This standard is identical with ISO 254:1998

31.

08L014R0

MS ISO 9608:2009 

V-BELTS - UNIFORMITY OF BELTS - TEST METHOD FOR DETERMINATION OF CENTRE DISTANCE VARIATION (ISO 9608:1994, IDT)

This standard is identical with ISO 9608:1994

32.

08L018R0

MS ISO 4929:2009 

ROAD VEHICLES - DIAPHRAGM GASKETS FOR HYDRAULIC BRAKE MASTER CYLINDER RESERVOIRS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (ISO 4929:1978, IDT)

This standard is identical with ISO 4929:1978

33.

08L019R0

MS ISO 12161:2009 

ROAD VEHICLES - ENDURANCE BRAKING SYSTEMS OF MOTOR VEHICLES AND TOWED VEHICLES - TEST PROCEDURES (ISO 12161:2006, IDT)

This standard is identical with ISO 12161:2006

34.

08N003R0 d

MS ISO 5771:2009 

RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION (ISO 5771:2008, IDT)

This standard is identical with ISO 5771:2008

35.

08N004R0 d

MS ISO 6803:2009 

RUBBER OR THERMOPLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2008, IDT)

This standard is identical with ISO 6803:2008

36.

07O002R0

MS 2223-1:2009 

INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT - PART 1: GENERAL

This standard is identical with ISO 15489-1:2001

37.

07O003R0

MS 2223-2:2009 

INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT- PART 2: GUIDELINES

This standard is identical with ISO/TR 15489-2:2001

38.

08Q023R0

MS ISO 4417:2009 

SIZE DESIGNATION OF CLOTHES - HEADWEAR (ISO 4417:1977, IDT)

This standard is identical with ISO 4417:1977

39.

06R095R0

MS IEC 60601-2-33:2009 

MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSTIC (IEC 60601-2-33:2002 AND ITS AMENDMENT 1:2005, IDT)

This standard is identical with IEC 60601-2-33:2002 and its amendment 1:2005

40.

06R096R0

MS IEC 60601-2-37:2009 

MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT (IEC 60601-2-37:2004 AND ITS AMENDMENT 2:2005, IDT)

This standard is identical with IEC 60601-2-37:2004 and its amendment 2:2005

41.

06R097R0

MS IEC 62464-1:2009 

MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL IMAGING - PART 1: DETERMINATION OF ESSENTIAL IMAGE QUALITY PARAMETERS (IEC 62464-1:2007, IDT)

This standard is identical with IEC 62464-1:2007

42.

07R048R0

MS 2218:2009 

RUBBER CONDOMS - GUIDANCE ON THE USE OF MS 113 IN THE QUALITY MANAGEMENT OF NATURAL RUBBER LATEX CONDOMS (ISO 16038:2005, MOD)

This standard corresponds to ISO 16038:2005

43.

08R020R0

MS ISO 18369-1:2009 

OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2006, IDT)

This standard is identical with ISO 18369-1:2006

44.

08R021R0

MS ISO 18369-2:2009 

OPHTHALMIC OPTICS - CONTACT LENSES - PART 2: TOLERANCES (ISO 18369-2:2006, IDT)

This standard is identical with ISO 18369-2:2006

45.

08R022R0

MS ISO 18369-3:2009 

OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS (ISO 18369-3:2006, IDT)

This standard is identical with ISO 18369-3:2006

46.

08R023R0

MS ISO 18369-4:2009 

OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS (ISO 18369 - 4:2006, IDT)

This standard is identical with ISO 18369-4:2006

47.

08R025R0

MS ISO 11979-1:2009 

OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 1: VOCABULARY (ISO 11979-1:2006, IDT)

This standard is identical with ISO 11979-1 :2006

48.

08R026R0

MS ISO 11979-3:2009 

OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3 : MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2006, IDT)

This standard is identical with ISO 11979-3: 2006

49.

**07U047R0

MS 2229:2009 

MILK POWDER : DETERMINATION OF SOY AND PEA PROTEINS USING CAPILLARY ELECTROPHORESIS IN THE PRESENCE OF SODIUM DODECYL SULFATE (SDS-CE- SCREEENING METHOD ) (ISO 17129:2006, MOD)

This standard corresponds to ISO 17129:2006

50.

08U021R0

MS ISO 3063:2009 

OIL OF YLANG-YLANG [CANANGA ODORATA (LAM.) HOOK. F. ET THOMSON FORMA GENUINA] (ISO 3063:2004, IDT)

This standard is identical with ISO 3063:2004

51.

08U022R0

MS ISO 3215:2009 

OIL OF NUTMEG INDONESIAN TYPE (MYRISTICA FRAGRANS HOUTT.) (ISO 3215:1998, IDT)

This standard is identical with ISO 3215:1998

52.

08U023R0

MS ISO 9301:2009 

OIL OF CUMIN SEED (CUMIMUM CYMIMUM L.) - SPECIFICATION (ISO 9301:2003, IDT)

This standard is identical with ISO 9301:2003

 

53.

08U024R0

MS ISO 3044:2009 

OIL OF EUCALYPTUS CITRIODORA HOOK. (ISO 3044:1997, IDT)

This standard is identical with ISO 3044:1997

54.

08U025R0

MS ISO 3061:2009 

OIL OF BLACK PEPPER (PIPER NIGRUM L.) (ISO 3061:2008, IDT)

This standard is identical with ISO 3061:2008

55.

08U027R0

MS ISO 22972:2009 

ESSENTIAL OILS - ANALYSIS BY GAS CHROMATOGRAPHY ON CHIRAL CAPILLARY COLUMNS - GENERAL METHOD (ISO 22972:2004, IDT)

This standard is identical with ISO 22972:2004

56.

08U029R0

MS ISO 855:2009 

OIL OF LEMON (CITRUS LIMON (L.) BURM. F.) (ISO 855:2003, IDT)

This standard is identical with ISO 855:2003

57.

08U030R0

MS ISO 7358:2009 

OILS OF BERGAMOT, LEMON, CITRON AND LIME, FULLY OR PARTIALLY REDUCED IN BERGAPTEN - DETERMINATION OF BERGAPTEN CONTENT BY HIGH-PRESSURE LIQUID CHROMATOGRAPHY (HPLC) (ISO 7358:2002, IDT)

This standard is identical with ISO 7358:2002

58.

08U031R0

MS ISO 4735:2009 

OILS OF CITRUS - DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROMETRIC ANALYSIS (ISO 4735:2002, IDT)

This standard is identical with ISO 4735:2002

59.

08U032R0

MS ISO 7359:2009 

ESSENTIAL OILS - ANALYSIS BY GAS CHROMATOGRAPHY ON PACKED COLUMNS - GENERAL METHOD (ISO 7359:1985, IDT)

This standard is identical with ISO 7359:1985

60.

08U034R0

MS ISO 7609:2009 

ESSENTIAL OILS - ANALYSIS BY GAS CHROMATOGRAPHY ON CAPILLARY COLUMNS - GENERAL METHOD (ISO 7609:1985, IDT)

This standard is identical with ISO 7609:1985

61.

07Z034R0

MS ISO 14065:2009 

GREENHOUSE GASES - REQUIREMENTS FOR GREENHOUSE GAS VALIDATION AND VERIFICATION BODIES FOR USE IN ACCREDITATION OR OTHER FORMS OF RECOGNITION (ISO 14065:2007, IDT)

This standard is identical with ISO 14065:2007

62.

08Z006R0

MS 2220:2009 

PRACTICE FOR SAMPLING CONSOLIDATED SOLIDS IN DRUMS OR SIMILAR CONTAINERS

This standard corresponds to ASTM D5679-95a (Reapproved 2006)

63.

08Z007R0

MS 2221:2009 

PRACTICE FOR SAMPLING WASTES FROM PIPES AND OTHER POINT DISCHARGES

This standard corresponds to ASTM D5013-89 (Reapproved 2003)

64.

08Z010R0

MS ISO 10780:2009 

STATIONARY SOURCE EMISSIONS - MEASUREMENT OF VELOCITY AND VOLUME FLOWRATE OF GAS STREAMS IN DUCTS (ISO 10780:1994 (2005), IDT)

This standard is identical with ISO 10780:1994 (2005)

65.

08Z011R0

MS ISO 12039:2009 

STATIONARY SOURCE EMISSIONS -- DETERMINATION OF CARBON MONOXIDE, CARBON DIOXIDE AND OXYGEN - PERFORMANCE CHARACTERISTICS AND CALIBRATION OF AUTOMATED MEASURING SYSTEMS (ISO 12039:2001 (2006), IDT)

This standard is identical with ISO 12039:2001 (2006)

66.

08Z013R0

MS ISO 11564:2009 

STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF NITROGEN OXIDES - NAPHTHYLETHYLENEDIAMINE PHOTOMETRIC METHOD (ISO 11564:1998 (2004), IDT)

This standard is identical with ISO 11564:1998 (2004)

67.

08Z014R0

MS ISO 11632:2009 

STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE - ION CHROMATOGRAPHY METHOD (ISO 11632:1998 (2004), IDT)

This standard is identical with ISO 11632:1998 (2004)

68.

08Z015R0

MS ISO 15713:2009 

STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF GASEOUS FLUORIDE CONTENT (ISO 15713:2006, IDT)

This standard is identical with ISO 15713:2006

69.

08Z016R0

MS ISO 17713:2009 

METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE (MS ISO 17713-1)

This standard is identical with ISO 17713:2007

70.

08Z017R0

MS ISO 17714:2009 

METEOROLOGY — AIR TEMPERATURE MEASUREMENTS — TEST METHODS FOR COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND DEFINING IMPORTANT CHARACTERISTICS (MS ISO 17714)

This standard is identical with ISO 17714:2007

 

REVISED

Malaysian Standard

No.

 

Project No.

 

Malaysian Standard Number and Title

Remarks

1.

08B039R1

MS 1159:2009

PENCIL - SPECIFICATION (FIRST REVISION)

This standard is the 1st Revision of MS 1159:1989.

2.

07D001R1

MS 1135:2009 

FLOAT AND POLISHED PLATE GLASSES - SPECIFICATION

This standard is the 1st Revision of MS 1135: 1989.

3.

08F004R1

MS ISO 6506-1:2009 

METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 1: TEST METHOD (ISO 6506-1:2005, IDT)

This standard is the 1st Revision of MS ISO 410:1999.

This standard is identical with ISO 6506-1:2005

4.

08F005R1

MS ISO 6506-2:2009 

METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2005, IDT)

This standard is the 1st Revision of MS ISO 156:1999.

This standard is identical with ISO 6506-2:2005 Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines

5.

08F006R1

MS ISO 6506-3:2009 

METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2005, IDT)

This standard is the 1st Revision of MS ISO 726:1999.

This standard is identical with ISO 6506-3:2005

6.

08F008R1

MS ISO 1099:2009 

METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD (ISO 1099:2006, IDT)

This standard is the 1st Revision of MS 1099:1975.

This standard is identical with ISO 1099:2006

7.

08F009R1

MS ISO 4545-1:2009  

METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 1: TEST METHOD (ISO 4545-1:2005, IDT)

This standard is the 1st Revision of MS ISO 4545:2000.

This standard is identical with ISO 4545-1:2005

8.

08F010R1

MS ISO 4545-2:2009 

METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 4545-2:2005, IDT)

This standard is the 1st Revision of MS ISO 4546:2000.

This standard is identical with ISO 4545-2:2005

9.

08F011R1

MS ISO 4545-3:2009 

METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 4545-3:2005, IDT)

This standard is the 1st Revision of MS ISO 4547:2000.

This standard is identical with ISO 4545-3:2005

10.

08K001R1

MS ISO 668:2009 

SERIES 1 FREIGHT CONTAINERS - CLASSIFICATION, DIMENSIONS AND RATINGS (FIRST REVISION) (ISO 668:1995, AMD. 1:2005, AMD. 2:2005, IDT)

This standard is the 1st Revision of .MS ISO 668:1999

This standard is identical with ISO 668:1995

11.

08K006R1

MS ISO 1496-1:2009 

SERIES 1 FREIGHT CONTAINERS - SPECIFICATION AND TESTING - PART 1: GENERAL CARGO CONTAINERS FOR GENERAL PURPOSES (FIRST REVISION) (ISO 1496-1:1990 , AMD. 1:1993, AMD. 2:1998, AMD. 3:2005, AMD. 4:2006, AMD. 5:2006, IDT)

This standard is the 1st Revision of MS ISO 1496-1:1999..

This standard is identical with ISO 1496-1:1990

12.

08K007R1

MS ISO 1496-3:2009 

SERIES 1 FREIGHT CONTAINERS - SPECIFICATION AND TESTING - PART 3: TANK CONTAINERS FOR LIQUIDS, GASES AND PRESSURISED DRY BULK FIRST REVISION)(ISO 1496-3:1995, AMD. 1:2006, IDT)

This standard is the 1st Revision of MS ISO 1496-3.

This standard is identical with ISO 1496-3

13.

08L020R1

MS ISO 8854:2009 

ROAD VEHICLES - ALTERNATORS WITH REGULATORS - TEST METHODS AND GENERAL REQUIREMENTS (ISO 8854:1988, IDT)

This standard is the 1st Revision of MS 1166:1989.

This standard is identical with ISO 8854:1988

14.

08N012R1 d

MS ISO 37:2009 

RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT LOW TEMPERATURES (FIRST REVISION) (ISO 37:2005, IDT)

 

 

 

This standard is the 1st Revision of MS ISO 37:1998.

This standard is identical with ISO 37:2005

15.

08N013R1 d

MS ISO 48:2009 

RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) (FIRST REVISION) (ISO 48:2007, IDT)

This standard is the 1st Revision of MS ISO 48:2002.

This standard is identical with ISO 48:2007

16.

08N014R4 d

MS 281-3:2009  

NATURAL RUBBER LATEX CONCENTRATE: PART 3: DETERMINATION OF DRY RUBBER CONTENT (FOURTH REVISION)

This standard is the 4th Revision of MS 281: Part 3: 1998.

17.

07Q033R1

MS 1747-1:2009 

TEXTILES - MALAYSIAN WOVEN FABRIC - PART 1: MALAYSIAN SONGKET (FIRST REVISION)

This standard is the 1st Revision of MS 1747: Bahagian 2:2004.

18.

08Q024R1

MS ISO 3759:2009 

TEXTILES - PREPARATION, MARKING AND MEASURING OF FABRIC SPECIMENS AND GARMENTS IN TESTS FOR DETERMINATION OF DIMENSIONAL CHANGE (FIRST REVISION) (ISO 3759:2007, IDT)

This standard is the 1st Revision of MS ISO 3759:1995.

This standard is identical with ISO 3759:2007

19.

07R050R1

MS ISO 11607-1:2009 

PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (FIRST REVISION) (ISO 11607-1:2006, IDT)

This standard is the 1st Revision of MS 1927:2006 all parts.

This standard is identical with ISO 11607-1: 2006

20.

07R051R1

MS ISO 11607-2:2009 

PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (FIRST REVISION) (ISO 11607-2:2006, IDT)

This standard is the 1st Revision of MS 1927:2006 all parts.

This standard is identical with ISO 11607-2:2006

21.

07R052R1

MS ISO 1135-4:2009 

TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE (FIRST REVISION) (ISO 1135-4:2004, IDT)

This standard is the 1st Revision of MS 1099:1987.

This standard is identical with ISO 1135-4:2004

22.

07R053R1

MS ISO 8536-4:2009 

INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (FIRST REVISION) (ISO 8536-4:2007, IDT)

This standard is the 1st Revision of MS 1099:1987.

This standard is identical with ISO 8536-4:2007

23.

04A022R2

MS 513:2009 

CARAMEL IN THE MANUFACTURE OF SOYA SAUCE - SPECIFICATION (SECOND REVISION)

This standard is the 2nd Revision of 513.

24.

07U049R1

MS 1514:2009 

GOOD MANUFACTURING PRACTICE FOR FOOD (FIRST REVISION)

This standard is the 1st Revision of MS 1514.

25.

08U039R1

MS 997:2009 

CANNED BAKED BEANS IN TOMATO SAUCE - SPECIFICATION (FIRST REVISION)

This standard is the 1st Revision of MS 997:1986.

26.

08Y003R1

MS ISO 9001:2009

QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (FIRST REVISION) (ISO 9001:2008, IDT)

This standard is the 1st Revision of MS ISO 9001:2000.

This standard is identical with ISO 9001:2008

 

 

WITHDRAWN

 Malaysian Standard

No.

 

Project No.

 

Malaysian Standard Number and Title

New MS (Replaced by)

 

1.

MS 1165:1999

Specification for pressure regulators and automatic changeover devices for liquefied petroleum gas (First revision

MS 1165:2008, Pressure regulators and automatic changeover devices for liquefied petroleum gas - Specification

(Second revision)

 

ISC F (15/10/2008)

2.

MS 1525:2001

Code of practice on energy efficiency and use of renewable energy for non-residential buildings

MS 1525:2007, Code of practice on energy efficiency and use of renewable energy for non-residential buildings

(First revision)

 

ISC F (15/10/2008)

 

3.

MS IEC 61000-3-8:2001

 

Electromagnetic compatibility (EMC) – Part 3: Limits – Section 8: Signalling on low-voltage electrical frequency bands and electromagnetic levels

 

 

MS IEC 61000-3-8:2007

Electromagnetic compatibility (EMC) – Part 3: Limits – Section 8: Signalling on low-voltage electrical frequency bands and electromagnetic levels

 

ISC E (12/11/2008)

 

4.

MS 1036 : 1986

Specification for wood chipboard and method of test for particle board

MS 1036:2006, Wood-based panels - Particleboards - Specification (First revision)

 

ISC D (21/10/2008)

 

5.

MS 1402 : 1996

 

Code of practice for sanitary system in buildings

MS 1402:Part 1:2006, Code of practice for sanitary system in buildings – Part 1: Design (First revision)

 

MS 1402: Part 2:2006, Code of practice for sanitary system in buildings – Part 2: Installation (First revision)

 

MS 1402: Part 3:2006, Code of practice for sanitary system in buildings – Part 3: Testing and commissioning (First revision)

 

MS 1402: Part 4:2006, Code of practice for sanitary system in buildings – Part 4: Operation and Maintenance (First revision)

 

ISC D (21/10/2008)

 

6.

MS 976 : 1985

Specification for toilet seats of moulded plastics

MS 976 : 2004,  WC seats (plastics) - Specification (First revision)

 

ISC D (21/10/2008)

 

7.

MS 1042:1986

Code of practice for safety in laboratories - Part 1: General.

MS 1042:2007 Code of practice for safety in laboratories - Part 1: General.

 

ISC W (23/10/2008)

 

8.

MS 1454:1999

Specification for liquid polyaluminium chloride for potable water treatment

 

MS 1454:2007, Liquid polyaluminium chloride for use in potable water supply – Specification (First revision)

 

ISC B (09/10/2008)

9.

MS 1455:1999

Methods of analysis for polyaluminium-based coagulants

 

10.

MS 1457:1999

Guidelines for the application of liquid polyaluminium-based coagulants in potable water treatment

 

11.

MS ISO 2285:2005

Rubber, vulcanized or thermoplastic – Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (First revision)

 

MS ISO 2285:2007,

Rubber, vulcanized or thermoplastic – Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (Second revision)

 

ISC N (10/11/2008)

 

12.

MS ISO 2782:1999

Rubber, vulcanized or thermoplastic – Determination of permeability to gases

 

MS ISO 2782:2007,

Rubber, vulcanized or thermoplastic – Determination of permeability to gases

(First revision)

 

ISC N (10/11/2008)

 

13.

MS ISO 8331:2004

Rubber and plastics hoses and hose assemblies – Guidelines for selection, storage, use and maintenance

 

MS ISO 8331:2007, Rubber and plastics hoses and hose assemblies – Guidelines for selection, storage, use and maintenance

(First revision)

 

ISC N (10/11/2008)      

 

14.

MS ISO 3865:1999

Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material

 

MS ISO 3865:2008,

Rubber, vulcanized or thermoplastic - Methods of test for staining in contact with organic material

(First revision)

 

ISC N (10/11/2008)

 

15.

MS ISO 8330:2002

Rubber and thermoplastic hoses and hose assemblies - Vocabulary

MS ISO 8330:2008,

Rubber and thermoplastic hoses and hose assemblies - Vocabulary (First revision)

 

ISC N (10/11/2008)

 

16.

MS 1157: Part 16: 1992

Methods of test for vulcanized rubber: Part 16: Resistance to ozone cracking – Static strain test

 

MS ISO 1431-1, Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1: Static and dynamic strain testing (First revision)

 

ISC N (10/11/2008)

 

17.

MS 1157: Part 18: 1992

Methods of test for vulcanized rubber: Part 18: Determination of modulus in shear - Quadruple shear methods,

MS ISO 1827, Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods (First revision)

 

ISC N (10/11/2008)

 

 

 

18.

MS 1157:Part 19: 1992

Methods of test for vulcanized rubber: Part 19: Determination of adhesion to rigid plates in shear - Quadruple shear methods

MS ISO 1827, Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods (First revision)

 

ISC N (10/11/2008)

 

19.

MS 1157: Part 31: 1992

Methods of test for vulcanized rubber: Part 31: Determination of adhesion to wire cord

MS ISO 5603, Rubber, vulcanized – Determination of adhesion to wire cord (First revision)

 

ISC N (10/11/2008)

 

20.

MS ISO 188:2001

Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

MS ISO 188, Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests (First revision)

 

ISC N (10/11/2008)

 

21.

MS ISO 14040:1998

Environmental management- Life cycle assessment- Principles and framework

MS 14040:2008,

Environmental management- Life cycle assessment- Principles and framework (First revision)

 

and

 

MS ISO 14044:2008, Environmental management- Life cycle assessment- Requirements and guidelines

 

ISC Z (14/08/2008)

22.

MS ISO 14041:2000

 

Environmental management – Life cycle assessment – Goal and scope definition and inventory analysis

 

23.

MS ISO 14042:2001

 

Environmental management – Life cycle assessment – Life cycle impact assessment

 

24.

MS ISO 14043:2001

 

Environmental management – Life cycle assessment – Life cycle interpretation

 

25.

MS 252: Part 34:1994,

 

Animal and vegetable fats and oils : Part 34: Determination of polymerized triglycerides by gel-permeation high performance liquid chromatography

 

 

Replaced:

 

 

 

 

 

 

 

 

 

 

 

 

ISC U (21/11/2008)

 

26.

MS 252: Part 35:1994

Animal and vegetable fats and oils : Part 35: Determination of polar compounds content

 

27.

MS 252: Part 33:1994

Animal and vegetable fats and oils : Part 33: Determination of cold stability

 

28.

MS 252: Part 21:1994

Animal and vegetable fats and oils : Part 21: Rapid method for the preparation of methyl esters of fatty acids

 

29.

MS 252: Part 22:1994

Animal and vegetable fats and oils : Part 22: Determination of fatty acid methyl esters by gas-liquid chromatography

 

30.

MS 252: Part 23:1994,

Animal and vegetable fats and oils : Part 23: Detection and identification of antioxidants - Liquid chromatographic method

 

31.

MS 252: Part 24:1994,

Animal and vegetable fats and oils : Part 24: Determination of tocopherols and tocotrienols in vegetable oils and fats by high performance liquid chromatographic method

 

32.

MS 252: Part 25:1994

Animal and vegetable fats and oils : Part 25: Determination of gallates contents - Molecular absorption spectrometric method

 

33.

MS 252: Part 26:1994,

Animal and vegetable fats and oils : Part 26: Determination of composition of the sterol fraction - Method using gas chromatography

 

34.

MS 252: Part 27:1994

Animal and vegetable fats and oils : Part 27: Determination of solid fat content - Pulsed nuclear magnetic resonance method

 

35.

MS 252: Part 30:1994

Animal and vegetable fats and oils : Part 30: Determination of 1-monoglycerides and free glycerol content

 

36

MS 252: Part 19:1994

Animal and vegetable fats and oils : Part 19: Determination of water content - Entrainment method.

 

37.

MS 252: Part 20:1994

Animal and vegetable fats and oils : Part 20: Determination of specific extinction in ultra-violet light.