|
|
|
|
| SUBJECT INDEX |
|
| E |
|
Earthworks, code of practice |
MS 1754 |
Edifact |
|
| - Syntax rules to common to all parts | MS ISO 9735-1 |
| - Syntax rules to batch EDI | MS ISO 9735-2 |
| - Syntax rules specific to interactive EDI | MS ISO 9735-3 |
| - Syntax & service report message for batch EDI | MS ISO 9735-4 |
| - Security rules for batch EDI | MS ISO 9735-5 |
| - Secure authentication & acknowledgement message | MS ISO 9735-6 |
| - Associated data in EDI | MS ISO 9735-7 |
| - Security rules for batch EDI (Confidentiality) | MS ISO 9735-8 |
| - Security key & certificate management message | MS ISO 9735-9 |
Edison screw lampholders (Withdrawn) |
MS 488 |
Edison screw lampholders |
MS IEC 60238 |
Eggs - Chicken |
MS 680 |
Eggs - Duck |
MS 1250 |
Electric cables see Insulated cables |
|
Electric cables |
|
| - Aluminium solid conductors, Insulated cable | MS 434 |
| - Calculation, current rating | |
| - Sheath eddy | MS IEC 60287-1-2 |
| - Thermal resistance | MS IEC 60287-2-1 |
| - Reduction factors | MS IEC 60287-2-2 |
| - Power cable size | MS IEC 60287-3-2 |
| - High-voltage, guide and selection | MS IEC 60183 |
| - Fire conditions | |
| - Apparatus | MS IEC 60331-11 |
| - Electric data cables | MS IEC 60331-23 |
| - Optical fibre cables | MS IEC 60331-25 |
| - Procedures and requirements | MS IEC 60331-21 |
| - Part 1: Single vertical | MS IEC 60332-1 |
| - Part 2: Small vertical insulated copper | MS IEC 60332-2 |
| - Insulated flexible cords & cables | MS 140 |
| - Insulation & sheath, Rubber | MS 276 |
| - Part 1: Cables for voltages of 1 KV | MS IEC 60502-1 |
| - Part 2: Cables | MS IEC 60502-2 |
| - Part 4: Accessories for cables | MS IEC 60502-4 |
| - Insulation & sheaths | |
| - Test methods | MS 1095 |
| - Determining the mechanical properties | MS IEC 60811-1-1 |
| - Thermal ageing methods | MS IEC 60811-1-2 |
| - Density- water absorption tests-shrinkage tests | MS IEC 60811-1-3 |
| - Test at low temperature | MS IEC 60811-1-4 |
| - Elastometric compounds, ozone resistance, hot set test | MS IEC 60811-2-1 |
| - PVC, tests for resistance to cracking | MS IEC 60811-3-1 |
| - PVC,thermal stability test | MS IEC 60811-3-2 |
| - PE and polypropylene compounds | |
|
MS IEC 60811-4-1 |
|
MS IEC 60811-4-2 |
|
MS IEC 60811-5-1 |
|
MS IEC 60229 |
| - Test method | |
| - Part 1 : Cables, cords and wires for voltages 450/750V | MS IEC 60885-1 |
| - Part 2 : Partial discharge tests | MS IEC 60885-2 |
| - Part 3 : Partial discharge – lengths of extruded power cables | MS IEC 60885-3 |
| - Portable cable reels, for household use | |
| - PVC, Insulation & sheath | MS 138 |
Electric conductors - Overhead transmission |
MS 1142 |
Electric conduits |
|
| - Rigid PVC | |
| - Underground telecommunication cables | MS 1034 |
| - Non metallic, PVC (Withdrawn) | MS 67 : Part 1 |
| - Steel conduits | |
| - Steel conduits,bends & couplers | MS 275 : Part 1 |
| - Fittings & components | MS 275 : Part 2 |
Electric control equipment see Controlgear, Switchgear |
|
Electric fans |
|
| - AC type (Withdrawn & replaced by MS 1219 & 1220) | MS 64 |
| - Circulating fans | |
| - Safety | MS 1219 : Part 2 |
| - Performance and construction | MS 1220 |
| - Pedestal type type (Withdrawn & replaced by MS 1219 & 1220) | MS 65 |
| - Table fan (Withdrawn & replaced by MS 1219 & 1220) | MS 139 |
| - Ventilating fans (Withdrawn & replaced by MS 1219 & 1220) | MS 70 |
Electrical accessories |
|
| - PRCDs | MS IEC 61540 |
| - Safety | MS 1144 |
Electric toys, safety |
MS 1725 |
Electrical apparatus explosive gas atmospheres |
|
| - Part 0 : General requirements | MS IEC 60079-0 |
| - Part 1 : Flameproof enclosures "d" | MS IEC 60079-1 |
| - Part 1-1 : Flameproof enclosures "d" | MS IEC 60079-1-1 |
| - Part 27 : Fieldbus intrisically safe concept (FISCO) | MS IEC TS 60079-27 |
| - Part 2 : Pressurized enclosures "p" | MS IEC 60079-2 |
| - Part 4 : Ingnition temperature | MS IEC 60079-4 |
| - Part 5 : Powder filling "q" | MS IEC 60079-5 |
| - Part 6 : Oil immersion "o" | MS IEC 60079-6 |
| - Part 7 : Increased safety "e" | MS IEC 60079-7 |
| - Part 10 : Classification of hazardous areas | MS IEC 60079-10 |
| - Part 11 : Intrinsic safety "l" | MS IEC 60079-11 |
| - Part 14 : Electrical installations in hazordous areas (other than mines) | MS IEC 60079-14 |
| - Part 15 : Type of protection "n" | MS IEC 60079-15 |
| - Part 16 : Artificial ventilation for the protection of analysers houses | MS 1591 |
| - Part 17 : Inspection & maintenance | MS IEC 60079-17 |
| - Part 18 : Encapsulation "m" | MS IEC 60079-18 |
| - Part 19 : Repair and overhoul, explosives atmospheres | MS IEC 60079-19 |
| - Part 20 : Data for flammable gases & vapours, relatingto the use | MS 1592 |
Electrical household appliances |
|
| - Amusement machine and personal service machines | MS IEC 60335-2-82 |
| - Aquarium & garden ponds | MS IEC 60335-2-55 |
| - Air-cleaning appliances | MS IEC 60335-2-65 |
| - Appliances for skin or hair care | MS IEC 60335-2-23 |
| - Battery chargers | MS IEC 60335-2-29 |
| - Clocks | MS IEC 60335-2-26 |
| - Commercial electric cooking ranges,ovens,hobs & hob elements | |
| - Commercial electric griddles & griddle grills | MS IEC 60335-2-38 |
| - Commercial electric deep fat fryer | MS IEC 60335-2-37 |
| - Commercial electric multi-purpose cooking pans | MS IEC 60335-2-37 |
| - Commercial electric kitchen machines | MS IEC 60335-2-64 |
| - Circuit breakers for a.c operation | MS IEC 60898-1 |
| - Commercial electric forced convection ovens, steam cookers and steam-convection ovens | MS IEC 60335-2-42 |
| - Circuit breakers for a.c and d.c operation | MS IEC 60898-2 |
| - Cooking ranges (Withdrawn) | MS 472 : Part 2 : Sec. 2.1 |
| - Commercial dispensing appliances and vending machines | MS 1597 -2-75 |
| - Electric fabric steamers | MS IEC 60355-2-85 |
| - Fixed immersion heaters | MS 1597 -2-73 |
| - Stationery cooking ranges, hobs, ovens and similar appliances | MS 1597 -2-6 |
| - Deep fat fryers,frying pans | MS IEC 60335-2-13 |
| - Electric irons | MS IEC 60335-2-3 |
| - Electric irons - Measuring performance | MS 1753 |
| - Electric ironing machine | MS 1751 |
| - Electric toaster | MS 1752 |
| - Electrical heat pumps, air conditioners & dehumidifiers | MS IEC 60335-2-49 |
| - Electrical heat pumps, air conditioners & dehumidifiers | MS IEC 60335-2-40 |
| - Floor treatment & wet scrubbing machines | MS 472 : Part 2 : Sec. 2.11 |
| - Floor treatment and wet scrubbing machines | MS IEC 60335-2-10 |
| - Foot warmers & heating mats | MS IEC 60335-2-81 |
| - General (Withdrawn & replaced by MS IEC 335-1) | MS 472 : Part 1 |
| - General requirements | MS IEC 60335-1 |
| - Heating liquids | MS IEC 60335-2-15 |
| - Humidifies | MS IEC 60335-2-88 |
| - Humidifies | MS IEC 60335-2-98 |
| - Insect killers | MS IEC 60335-2-59 |
| - Irons | |
| - Household, Safety (Withdrawn & replace by MS IEC 335-2-3 | MS 472:Part .2 : Sec. 2.3 |
| - Performance measurement | MS 437 |
| - Kitchen machines | MS IEC 60335-2-14 |
| - Liquid heating appliances | MS 472 : Part 2 : Sec. 2.4 |
| - Massage appliances | MS IEC 60335-2-32 |
| - Microwave ovens | MS IEC 60335-2-25 |
| - Outdoors barbecues | MS IEC 60335-2-78 |
| - Portable heating tools and similar appliances | MS IEC 60335-2-45 |
| - Portable immersion heaters | MS IEC 60335-2-74 |
| - Pumps | MS IEC 60335-2-41 |
| - Range hoods | MS IEC 60335-2-31 |
| - Rice cooker | MS 472 : Part 2 : Sec. 2.9 |
| - Refrigerating appliances, ice-cream appliances and ice-makers | MS IEC 60335-2-24 |
| - Room air conditioner (Withdrawn) | MS 472 : Part 2 : Sec. 2.10 |
| - Rolling shutters, awning, blinds and similar equipment | MS IEC 60335-2-97 |
| - Safety | |
| - Part 1 : General requirements | MS IEC 60335-1 |
| - Sewing machines | MS IEC 60335-2-28 |
| - Shavers, hair clippers and similar appliances | MS IEC 60335-2-8 |
| - Skin and hair care | MS IEC 60335-2-23 |
| - Spin extractors | MS IEC 60335-2-4 |
| - Stationary instantaneous water heaters | MS 472 : Part 3 : Sec. 3.1 |
| - Stationary cooking ranges, hobs, oven & similar appliances | MS IEC 60335-2-6 |
| - Storage water heaters | MS IEC 60335-2-21 |
| - Toasters,grills,waffle irons & roasters (Withdrawn &replaced by MS IEC 335-2-9) | MS 472 : Part 2 : Sec. 2.2 |
| - Toasters - Performance measurement | MS 436 |
| - Toasters,grills,roasters | MS IEC 60335-2-9 |
| - Tumbler dryers | MS IEC 60335-2-11 |
| - Vacuum cleaners & water suction cleaning appliances | MS IEC 60335-2-2 |
| - Vaporisers | MS IEC 60335-2-101 |
| - Vertically moving garage doors | MS IEC 60335-2-95 |
| - Warming machines | MS IEC 60335-2-12 |
| - Washing machines | MS IEC 60335-2-7 |
| - Whirlpool baths | MS IEC 60335-2-60 |
Electrical installations of building |
|
| - Pt. 1: Scope, object and fundamental principles | MS IEC 60364-1 |
| - Pt. 2:Chapter 21: Definition, guide to general term (Withdrawn) | MS IEC 60364-2-21 |
| - Pt. 3: Assessment of general characteristics (Withdrawn) | MS IEC 60364-3 |
| - Pt. 4:Chapter 41:Protection against electric shock | MS IEC 60364-4-41 |
| - Pt. 4:Chapter 42:Protection against thermal effects | MS IEC 60364-4-42 |
| - Pt. 4:Chapter 43:Protection against over current | MS IEC 60364-4-43 |
| - Pt. 4:Chapter 44: Protection of low-voltage installations (Withdrawn) | MS IEC 60364-4-442 |
| - Pt. 4:Chapter 44:Protection against overvoltages of atmospheric origin or due to switching (Withdrawn) | MS IEC 60364-4-443 |
| - Pt. 4:Chapter 44:Protection against voltage disturbances | MS IEC 60364-4-44 |
| - Pt. 4:Chapter 45: Protection against under voltages (Withdrawn) | MS IEC 60364-4-45 |
| - Pt. 4:Chapter 46: Isolation and switching (Withdrawn) | MS IEC 60364-4-46 |
| - Pt. 4:Chapter 47:Measures of protection against electric shock (Withdrawn) | MS IEC 60364-4-47 |
| - Pt. 4:Chapter 47:Measures of protection against overcurrent (Withdrawn) | MS IEC 60364-4-473 |
| - Pt. 4:Chapter 48:Selection of measures for protection against electric shock in relation to external influence (Withdrawn) | MS IEC 60364-4-481 |
| - Pt. 4:Chapter 48: Protection against fire (Withdrawn) | MS IEC 60364-4-482 |
| - Pt. 5:Chapter 51: Common rules | MS IEC 60364-5-51 |
| - Pt. 5:Chapter 52: Wiring systems | MS IEC 60364-5-52 |
| - Pt. 5:Chapter 523: Current carrying capacities | MS IEC 60364-5-523 |
| - Pt. 5:Chapter 53: Devices for isolation and switching | MS IEC 60364-5-53 |
| - Pt. 5:Chapter 537: Devices for isolation & switching (Withdrawn) | MS IEC 60364-5-537 |
| - Pt. 5:Chapter 54: Earthing arrangements and protective conductor | MS IEC 60364-5-54 |
| - Pt. 5:Chapter 55: Low-voltage generating sets | MS IEC 60364-5-551 |
| - Pt. 5:Chapter 56: Safety services (Withdrawn) | MS IEC 60364-5-56 |
| - Pt. 6:Chapter 61: Initial verification | MS IEC 60364-6-61 |
| - Pt. 7: Requirement for special installations or location-swimming pools | MS IEC 60364-7-702 |
| - Pt. 7: Location containing sauna heaters | MS IEC 60364-7-703 |
| - Pt. 7: Construction and demolition site installations | MS IEC 60364-7-704 |
| - Pt. 7: Electrical installation of agricultural and | MS IEC 60364-7-705 |
| - Pt. 7: Restrictive conducting locations | MS IEC 60364-7-706 |
| - Pt. 7: Earthing requirements for the installations of data processing equipment | MS IEC 60364-7-707 |
| - Pt. 7: Electrical installations in caravan parks and caravans | MS IEC 60364-7-708 |
| - Pt. 7: Electrical installation in Marinas and pleasure craft | MS IEC 60364-7-709 |
Electrical installation – conduit systems |
MS 1428 |
| - Part 2 : Particular requirements | |
| - Sec. 2 : Pliable conduit systems | MS 1534 : Part 2 : Sec.2 |
| - Sec. 3 : Flexible conduit systems | MS 1534 : Part 2 : Sec.3 |
| - Sec. 4 : Conduit systems buried underground | MS 1534 : Part 2 : Sec.4 |
Electric tubular fluorescent lamps (Withdrawn) |
MS 63 |
Electric plugs - Fuse links |
MS 1428 |
| - 13A, Rewirable & non-rewirable | MS 589 : Part 1 |
| - 13A, Switched & unswitched socket outlets | MS 589 : Part 2 |
| - 13A, Fused connection units, switched & unswitched | MS 589 : Part 4 |
| - 13A, Adaptors | MS 589 : Part 3 |
| - 15A, plugs and socket-outlets | MS 1577 |
| - Flat non-rewirable 2-pole, 2.5A, 250V | MS 1578 |
Electric power generation - Private, Electrical safety code |
MS 556 |
Electric power quality |
MS 1533 |
Electric power systems - Extra low voltage, For indoor use |
MS 860 : Part 1 |
Electric power transmission - Voltages for AC systems |
MS 406 |
Electric shocks-Protection, Construction, Electrical equipment |
MS 1021 |
| - Climatic conditions | MS 477 |
Electric switches see Switches |
|
Electric wires - Wrought aluminium |
MS 435 |
Electrical insulating materials - Classification |
MS 938 |
Electrical measurement - Glossary |
|
| - Power engineering | |
| - Fundamental terminology (Withdrawn) | MS 400 : Part 1 : Gr. 01 |
| - General technological terminology (Withdrawn) | MS 400 : Part 1 : Gr. 02 |
| - Relay terminology (Withdrawn) | MS 400 : Part 1 : Gr. 03 |
| - Measurement terminology (Withdrawn) | MS 400 : Part 1 : Gr. 04 |
| - Semiconductor material (Withdrawn) | MS 400 : Part 1 : Gr. 05 : Sec. 1 |
| - Semiconductor devices (Withdrawn) | MS 400 : Part 1 : Gr. 05 : Sec. 2 |
|
- Electronic tube terminology |
|
| - General (Withdrawn) | MS 400 : Part 1 : Gr. 06 : Sec. 1 |
| - Construction & types of tube (Withdrawn) | MS 400 : Part 1 : Gr. 06 : Sec. 2 & 3 |
| - Properties & quantities (Withdrawn) | MS 400 : Part 1 : Gr. 06 : Sec. 4 |
| - Magnetism terminology (Withdrawn) | MS 400 : Part 1 : Gr. 07 |
| - Piezo-electric device terminology (Withdrawn) | MS 400 : Part 1 : Gr. 08 |
| - Radio interference terminology (Withdrawn) | MS 400 : Part 1 : Gr. 09 |
| - Power terminology (Withdrawn) | MS 400 : Part 2 : Gr. 01 |
| - Static converter terminology | |
| - General, applicable to asymmetrically conducting devices (Withdrawn) | MS 400 : Part 2 : Gr. 02 : Sec. 1,2,3,4 |
| - Applicable to the electrical operation (Withdrawn) | MS 400 : Part 2 : Gr. 02 : Sec 5,6,7 |
| - Rotating machinery terminology | |
| - Machines (Withdrawn) | MS 400 : Part 2 : Gr. 03 : Sec 1 |
| - Windling,magnetic & electrical parts (Withdrawn) | MS 400 : Part 2 : Gr. 03 : Sec 2 |
| - Mechanical parts (Withdrawn) | MS 400 : Part 2 : Gr. 03 : Sec 3 |
| - Transfer terminology (Withdrawn) | MS 400 : Part 2 : Gr. 04 |
| - Voltage fluctuation terminology (Withdrawn) | MS 400 : Part 2 : Gr. 05 |
| - Switchgear & controlgear terminology (Withdrawn) | MS 400 : Part 2 : Gr. 06 |
| - Tariffs terminology (Withdrawn) | MS 400 : Part 2 : Gr. 07 |
| - Power cable terminology (Withdrawn) | MS 400 : Part 2 : Gr. 08 |
| - Telecommunications & electronics | |
| - General terminology (Withdrawn) | MS 400 : Part 3 : Gr. 01 |
| - Telephony terminology | |
| - Subscribers' stations & equipment, exchange & positions (Withdrawn) | MS 400 : Part 3 : Gr. 02 : Sec 1 & 2 |
| - Exchange equipment, repeater stations (Withdrawn) | MS 400 : Part 3 : Gr. 02 : Sec 3 & 4 |
| - Systems & circuits (Withdrawn) | MS 400 : Part 3 : Gr. 02 : Sec 5 |
| - Telegraphy, including facsimile terminology (Withdrawn) | MS 400 : Part 3 : Gr. 03 |
| - Broadcasting, radio & television terminology (Withdrawn) | MS 400 : Part 3 : Gr. 04 |
| - Propagation and media terminology (Withdrawn) | MS 400 : Part 3 : Gr. 05 |
| - Radio location & navigation terminology (Withdrawn) | MS 400 : Part 3 : Gr. 06 |
| - Radio communication (Withdrawn) | MS 400 : Part 3 : Gr. 07 |
| - Waveguide terminology (Withdrawn) | MS 400 : Part 3 : Gr. 09 |
| - Recording & reproduction of sound & video terminology (Withdrawn) | MS 400 : Part 3 : Gr. 10 |
| - Lighting and colour | |
| - Radiation & photometry (Withdrawn) | MS 400 : Part 4 : Gr. 01 |
| - Vision & colour terminology (Withdrawn) | MS 400 : Part 4 : Gr.02 : 1977 |
| - Lighting technology terminology (Withdrawn) | MS 400 : Part 4 : Gr. 03 |
Electrical measuring instruments |
|
| - Direct acting indicating, | MS 925 |
| - Maximum demand indicators | MS 944 |
Electrical plugs - 13A plugs, socket-outlets, adaptors and |
MS 589 : Part 4 |
| Connection units. Part: 4: Switches and unswitched | |
Electrical plugs, flat non-wirable two-pole plugs, 2.5A, 250V |
MS 1578 |
Electricity generating sets - Portable |
MS 1403 |
Electricity supply meters |
|
| - Class 0.5, 1 and 2 single-phase and polyphase | MS 859 : Part 1 |
| - 3 var-hour meters | MS 859 : Part 2 |
| - Class 1, Electro-mechanical maximum demand | MS 859 : Part 3 |
Electrodes |
|
| - Low alloy steel, For covered arc-welding | MS 519 |
| - Mild steel, For covered arc-welding | MS 518 |
| - Mild steel, For gas metal arc welding | MS 520 |
Electrolytic tinplate |
MS 1076 |
Electronic equipment |
|
| - Fixed resistors | |
| - Part 1 : Generic specification | MS IEC 60115-1 |
| - Mains operated, Household, safety | MS IEC 60065 |
| - Precautions with respect to possible hazards | MS 142 |
Electromagnetic compatibility |
|
| - Power drive systems (PDSs) | MS IEC 61800-3 |
| - Immunity - Product family standard tools & electric apparatus | MS CISPR 14-2 |
| - Limits - Limitation of voltage fluctuation & flicker | MS IEC 61000-3-3 |
| - Voltage fluctuations & flicker | MS IEC 61000-3-5 |
| - Limits – Emission of harmonic current supply | MS 1555 |
| - Limit for harmonic - Current emissions | MS IEC 61000-3-2 |
| - Environment | |
| - Mains signalling systems | MS IEC 61000-2-2 |
| - Industrial and non-public networks | MS IEC 61000-2-4 |
| - HEMP | |
| - Radiated disturbance | MS IEC 61000-2-9 |
| - Conducted disturbance | MS IEC 61000-2-10 |
| - Loads | |
| - Distorting loads | MS IEC 61000-3-6 |
| - Fluating loads | MS IEC 61000-3-7 |
| - Signalling on low -voltage installations | MS IEC 61000-3-8 |
| - Testing & measurement | |
| - Voltage dips, short interruptions voltage | MS IEC 61000-4-1 |
| - Harmonic & interharmonics measurements | MS IEC 61000-4-7 |
| - Power frequency magnetic | MS IEC 61000-4-8 |
| - Electrostatic discharge | MS IEC 61000-4-2 |
| - Surge immunity test | MS IEC 61000-4-5 |
| - Radio frequency (RF) | MS IEC 61000-4-6 |
| - Immunity test | MS IEC 61000-4-16 |
| - Oscillatory waves | MS IEC 61000-4-12 |
| - Damped oscillatory magnetic | MS IEC 61000-4-10 |
| - Radiated, RF, electromagnetic field immunity test | MS IEC 61000-4-3 |
| - Electrical fast transient/burst immunity | MS IEC 61000-4-4 |
| - Immunity test | MS IEC 61000-4-1 |
| - Pulse magnetic field immunity test | MS IEC 61000-4-9 |
| - HEMP conducted disturbance | MS IEC 61000-4-24 |
| - Voltage fluctuation immunity test | MS IEC 61000-4-14 |
| - Flickmeter - functional and design specifications | MS IEC 61000-4-15 |
| - Installation and mitigation guidelines | |
| - HEMP conducted disturbance | MS IEC 61000-5-5 |
| - Installation of household appliances, electric tools & similar apparatus | |
| -Emission | MS CISPR 14-1 |
| - Generic standards | |
| - Emission standard for residential, commercial & light-industrial environment | MS IEC 61000-6-3 |
| - Emission standard for industrial environments | MS IEC 61000-6-4 |
| - Immunity for residential, commercial & light-industrial environment | MS IEC 61000-6-1 |
| - Immunity for industrial environment | MS IEC 61000-6-2 |
Electrotechnical vocabulary: |
|
| - Electrical apparatus for explosive atmospheres | MS IEC 60050-426 |
| - Electromagnetic compatibility | MS 400 : Chapter 161 |
| - Magnetic materials and components | MS 400 : Chapter 221 |
| - Electromagnetism | MS 1487 |
| - Power electronics, harmonic analysis | MS IEC 60050-551-20 |
Electric luminaires |
|
| - Detail requirements | |
| - Electric handlamps | MS IEC 60598-2-8 |
| - Electrical supply track systems | MS 619 : Part 2 : Sec. 2.6 |
| - Flood lights | MS IEC 60598-2-5 |
| - Fixed general purpose | MS IEC 60598-2-1 |
| - Lighting fittings for division 2 areas (Withdrawn) | MS 619 : Part 2 : Sec. 2.1 |
| - Lighting chains | MS IEC 60598-2-20 |
| - Portable luminaires | MS IEC 60598-2-4 |
| - Road street lighting | MS IEC 60598-2-3 |
| - Recessed luminaires | MS IEC 60598-2-2 |
| - Swimming pools & similar applications | MS IEC 60598-2-18 |
| - Photo and film luminaires | MS IEC 60598-2-9 |
| - Hospitals and health care buildings | MS IEC 60598-2-25 |
| - Emergency lighting | |
| - Luminaires | MS 619 : Part 102 : Sec. 102.22 |
| - Premises | MS 1038 : Part 1 |
| - General requirements | MS IEC 60598-1 |
| - Classification (Withdrawn) | MS 619 : Part 1 : Sec. 1.2 |
| - Construction (Withdrawn) | MS 619 : Part 1 : Sec. 1.4 |
| - Creepage distances & clearances (Withdrawn) | MS 619 : Part 1 : Sec. 1.11 |
| - External & internal wiring (Withdrawn) | MS 619 : Part 1 : Sec. 1.5 |
| - Marking (Withdrawn) | MS 619 : Part 1 : Sec. 1.3 |
| - Operating temperatures & thermal endurance (Withdrawn) | MS 619 : Part 1 : Sec. 1.12 |
| - Provision for earthing (Withdrawn) | MS 619 : Part 1 : Sec. 1.7 |
| - Portable child - appealing | MS IEC 60598-2-10 |
| - Resistance to heat, fire & tracking (Withdrawn) | MS 619 : Part 1 : Sec. 1.13 |
| - Terminations (Withdrawn) | MS 619 : Part 1 : Sec. 1.6 |
| - Particular requirements | MS IEC 60598-1 |
| - Sec. 6 : Luminaires with built-in transformers for filament lamps | MS IEC 60598-2-6 |
| - Sec. 7 : Portable luminaires for garden use | MS IEC 60598-2-7 |
| - Sec. 17 : Luminaires for stage lighting, tv and film studios | MS IEC 60598-2-17 |
| - Sec. 19 : Air-handling luminaires (safety requirements) | MS IEC 60598-2-19 |
| - Sec. 23 : Extra low voltage lighting systems for filament lamps | MS IEC 60598-2-23 |
Electrical equipment |
|
| - EMC requirements | MS IEC 61326-1 |
Elongation determination - Fishing net yarns |
MS 690 |
Emulsion paints, For exterior & interior use |
MS 134 |
End enclosure |
MS 134 |
| - Writing and marking instruments | MS 1729-5 |
Enclosure |
|
| - Accessories for household | MS IEC 60670 |
| - Degrees of protection | MS IEC 60529 |
| - Electrical equipment, Classification systems | MS 940 |
| - Protection, LV switchgear & controlgear | MS 941 |
| - Probes for verification | MS IEC 61032 |
Endosulfan |
|
| - Dusts | MS 749 |
| - Emulsifiable concentrates | MS 748 |
| - Industrial, For pesticides | MS 731 |
| - Dispersible powders | MS 730 |
Energy efficiency |
MS 1525 |
Engine fuel systems - LPG, Internal combustion engines |
MS 775 |
Engine coolant |
MS 1078 |
| - Aqueous solutions, sampling | MS 1574 |
| - Ash content | MS 1706 |
| - Corrosion | MS 1708 |
| - Test method, relative density | MS 1707 |
| - Terminology | MS 1709 |
| - Trace chloride ion | MS 1710 |
| - Water, Karl Fischer reagent method | MS 1575 |
Envelopes |
MS 120 |
| - For storage of X-ray films | MS 856 |
Environmental testing, electronic equipment & component |
|
| - Accelerated, steady state (Withdrawn) | MS 143 : Part 2 : Test Ga |
| - Air pressure (Withdrawn) | MS 143 : Part 2 : Test M |
| - Bump (Withdrawn) | MS 143 : Part 2 : Test Eb |
| - Climatic sequence, component (Withdrawn) | MS 143 : Part 2 : Test Z/ABDM |
| - Cold Two (Withdrawn) | MS 143 : Part 2 : Test A |
| - Dry heat two (Withdrawn) | MS 143 : Part 2 : Test B |
| - Damp heat, accelerated (Withdrawn) | MS 143 : Part 2 : Test D |
| - Damp heat, steady state (Withdrawn) | MS 143 : Part 2 : Test C |
| - Electronic equipment & components (Withdrawn) | MS 143 : Part 1 |
| - General (Withdrawn) | MS 143 : P2 |
| - Mould growth (Withdrawn) | MS 143 : Part 2 : Test J |
| - Salt mist (Withdrawn) | MS 143 : Part 2 : Test Ka |
| - Sealing (Withdrawn) | MS 143 : Part 2 : Test Q |
| - Bushes, spindles and gaskets (Withdrawn) | MS 143 : Part 2 : Test Qa |
| - Extended test (Withdrawn) | MS 143 : Part 2 : Test Qb |
| - Driving rain (Withdrawn) | MS 143 : Part 2 : Test Qg |
| - Immersion (Withdrawn) | MS 143 : Part 2 : Test Qf |
| - Sealing container | |
| - Bomb pressure test (Withdrawn) | MS 143 : Part 2 : Test Ql |
| - Gas leakage (Withdrawn) | MS 143 : Part 2 : Test Qc |
| - Penetration of liquid (Withdrawn) | MS 143 : Part 2 : Test Qe |
| - Seepage of filling liquid (Withdrawn) | MS 143 : Part 2 : Test Qd |
| - Tracer gas (Withdrawn) | MS 143 : Part 2 : Test Qk |
| - Shock (Withdrawn) | MS 143 : Part 2 : Test Ea |
| - Soldering (Withdrawn) | MS 143 : Part 2 : Test T |
| - Storage (Withdrawn) | MS 143 : Part 2 : Test H |
| - Temperature change (Withdrawn) | MS 143 : Part 2 : Test N |
| - Terminations, robustness (Withdrawn) | MS 143 : Part 2 : Test U |
| - Vibration (Withdrawn) | MS 143 : Part 2 : Test F |
Environmental auditing |
|
| - Audit procedures | MS ISO 14011 |
| - Auditing | MS ISO 19011 |
| - General principles | MS ISO 14010 |
| - Qualification criteria for auditors | MS ISO 14012 |
Environmental conditions, classification |
|
| - Environmental conditions appearing in nature | |
| - Part 2-1 : Temperature and humidity | MS 1750 |
| - Part 2-2 : Precipitation and wind | MS IEC 60721-2-2 |
| - Part 2-3 : Air pressure | MS IEC 60721-2-3 |
Environmental labels & declarations |
|
| - General principles | MS ISO 14020 |
| - Principles & procedures | MS ISO 14024 |
| - Self-declared environmental claims | MS ISO 14021 |
Environmental management |
|
| - Assessment of sites and organisations (EASO) | MS ISO 14015 |
| - Principles and framework | MS ISO 14040 |
| - Life cycle assessment | |
| - Goal and scope | MS ISO 14041 |
| - Impact assessment | MS ISO 14042 |
| - Interpretation | MS ISO 14043 |
| - Performance evaluation, Guidelines | MS ISO 14031 |
| - Vocabulary | MS ISO 14050 |
Environmental systems |
|
| - Guidance for use | MS ISO 14001 |
| - Principles, systems & supporting techniques | MS ISO 14004 |
Ergocalciferol (Withdrawn) |
MS 723 |
MS 723 |
|
Ergonomic |
|
| - Evaluation, static working postures | MS ISO 11226 |
| - Requirements | |
| - Part 1 : Human interactions with displays and control actuators | MS ISO 9355-1 |
| - Part 2 : Displays | MS ISO 9355-2 |
| - Design | |
| - Part 1 : Control centres | MS ISO 11064-1 |
| - Part 2 : Control suites | MS ISO 11064-2 |
| - Part 3 : Control room layout | MS ISO 11064-3 |
| - Safety of machinery | |
| - Whole-body access into machinery | MS ISO 15534-1 |
| - Dimension required for access openings | MS ISO 15534-2 |
Erthyromycin (Withdrawn) |
MS 191 |
Ethanol , Industrial purposes |
MS 645 |
Ether (Withdrawn) |
MS 385 |
Ethyl alcohol (Pharmaceutical)(Withdrawn) |
MS 533 |
Ethinyloestradiol (Withdrawn) |
MS 179 |
Ethynodiol diacetate (Withdrawn) |
MS 180 |
Exercise books - Schools |
MS 121 |
Explosive gas atmospheres, Electrical apparatus |
|
| - Part 0 : General requirements | MS IEC 60079-0 |
| - Part 1 : Flameproof enclosures “d” | MS IEC 60079-1 |
| - Part 1-1 : Flameproof enclosures “d” | MS IEC 60079-1-1 |
| - Part 27 : Fieldbus intrinsically safe concept (FISCO) | MS IEC TS 60079-27 |
| - Part 2 : Pressurized enclosures “p” | MS IEC 60079-2 |
| - Part 4 : Ignition temperature | MS IEC 60079-4 |
| - Part 5 : Powder filling “q” | MS IEC 60079-5 |
| - Part 6 : Oil immersion “o” | MS IEC 60079-6 |
| - Part 7 : Increased safety “e” | MS IEC 60079-7 |
| - Part 10 : Classification of hazardous areas | MS IEC 60079-10 |
| - Part 11 : Intrinsic safety “l” | MS IEC 60079-11 |
| - Part 14 : Electrical installations in hazardous areas (other than mines) | MS IEC 60079-14 |
| - Part 15 : Type of protection “n” | MS IEC 60079-15 |
| - Part 16 : Artificial ventilation for the protection of analysers houses | MS 1591 |
| - Part 17 : Inspection & maintenance | MS IEC 60079-17 |
| - Part 18 : Encapsulation “m” | MS IEC 60079-18 |
| - Part 19 : Repair and overhaul, explosives atmospheres | MS IEC 60079-19 |
| - Part 20 : Data for flammable gases & vapours, relating to the use | MS 1592 |
| - Classification of mixtures of gases or vapour | MS 1712 |
| - Construction and use of rooms, pressurisation | MS 1713 |
Eye drops (Withdrawn) |
MS 373 |
Eye lotions (Withdrawn) |
MS 321 |
Eye protectors - Motor cycle users |
MS 1065 |
Eye-protectors |
|
| - Specification | MS ISO 4849 |
| - Vocabulary | MS IS0 4007 |
| - Welding and related techniques | |
| - Filters | MS IS0 4850 |
| - Ultra-violet filters | MS ISO 4851 |
| - Infra-red filters | MS ISO 4852 |
| - Optical test methods | MS ISO 4954 |
| - Non-optical test methods | MS ISO 4855 |
| - Synoptic tables | MS ISO 4856 |
| Filters – laser radiation | MS ISO 6161 |
|
|
|
|
| |