|
|
|
| 01 |
GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION |
Terminology (principles and coordination) |
|
| MS ISO 639 : 1995 | |
| Code for the representation of names of languages. | |
| This Malaysian Standard provides a code for the presentation of names of languages. The symbols were devised primarily for use in terminology, lexicography and linguistics, but they may be used for any application requiring the expression of languages in coded form. It also includes guidance on the use of language symbols in some of these applications. | |
| Price Code : C | |
Vocabularies |
|
Mechanical systems and components for general use (Vocabularies) |
|
| MS ISO 5408 : 2003 | |
| Fasteners and screw threads – Vocabulary: Part 1: Fundamental of screw threads | |
| This Malaysian Standard specifies the fundamental terms and definitions, which are applicable to cylindrical screw threads with profiles (in an axial plane) based on triangles. | |
| Price Code : B | |
Generalities. Terminology. Standardization. Documentation (Vocabularies) |
|
| MS ISO 9000 : 2000 | |
| Quality management systems - fundamentals and vocabulary | |
| Describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms. | |
| Price Code : D | |
Environment and health protection. Safety (Vocabularies) |
|
| MS 1471 : Part 1 : 1999 | |
| Vocabulary on fire protection : Part 1 : General terms and phenomena of fire | |
| Gives terms and definitions in general for fire protection. The terms are given in alphabetical order. | |
| Price Code : A | |
| MS 1471 : Part 2 : 1999 | |
| Vocabulary on fire protection : Part 2 : Structural fire protection | |
| Gives terms and definitions for structural fire protection. General terms and definitions are covered by MS 1471 : Part 1. The terms are given in alphabetical order. | |
| Price Code : A | |
| MS 1471 : Part 3 : 1999 | |
| Vocabulary on fire protection : Part 3 : Fire detection and alarm | |
| Gives terms and definitions for fire detection and definitions for fire detection and alarm. General terms and definitions are covered by MS 1471 : Part 1. The terms are given in alphabetical order. | |
| Price Code : A | |
| MS 1471 : Part 4 : 1999 | |
| Vocabulary on fire protection : Part 4 : Fire extinction equipment | |
| Gives terms and definitions relating to: - extinguishing media; - mobile extinguishers; - fixed extinguishing systems.General terms are covered by MS 1471 : Part 1. The terms are given in alphabetical order. | |
| Price Code : B | |
| MS 1471 : Part 5 : 1999 | |
| Vocabulary on fire protection : Part 5 : Smoke control | |
| Gives terms and definitions in the field of smoke control. General terms are covered by MS 1471 : Part 1. Terms are given in alphabetical order. | |
| Price Code : A | |
| MS 1471 : Part 6 : 1999 | |
| Vocabulary on fire protection : Part 6 : Evacuation and means of escape | |
| Gives terms and definitions for evacuation and means of escape. General terms and definitions are covered by MS 1471 : Part 1. The terms are given in alphabetical order. | |
| Price Code : A | |
| MS 1471 : Part 7 : 1999 | |
| Vocabulary on fire protection : Part 7 : Explosion detection and suppression means | |
| Gives terms and definitions for explosion detection and suppression means. General terms and definitions are covered by MS 1471 : Part 1. The terms are given in alphabetical order. | |
| Price Code : A | |
| MS 1471 : Part 8 : 1999 | |
| Vocabulary on fire protection : Part 8 : Terms specific to fire-fighting, rescue services and handling hazardous materials | |
| Gives terms specific to fire-fighting, rescue services and handling hazardous material. The terms are given in alphabetical order. | |
| Price Code : D | |
| MS ISO 6107-1 : 2004 | |
| Water quality – vocabulary – Part 1 | |
| This standard defines terms used in certain fields of water quality characterisation. The terms and definitions are grouped under the following main headings: Terms relating to types of water | |
| Price : RM40 | |
| MS ISO 6107-2 :2004 | |
| Water quality - Vocabulary - Part 2 | |
| This standard defines a second list of terms used in certain fields of quality characterisation. It covers terms relating to the sampling of water, analysis of water, and some miscellaneous terms. There are also additional terms relating to types of water and water treatment | |
| Price : RM30 | |
| MS ISO 6107-3 : 2004 | |
| Water quality - Vocabulary - Part 3 | |
| This standard defines a third list of terms used in certain fields of water quality characterisation. | |
| Price : RM30 | |
| MS ISO 6107-4 : 2004 | |
| Water quality - Vocabulary - Part 4 | |
| This standard defines a fourth list of terms used in certain fields of water quality characterisation. | |
| Price : RM10 | |
| MS ISO 6107-5 : 2004 | |
| Water quality - Vocabulary - Part 5 | |
| This standard defines a fifth list of terms used in certain fields of water quality characterisation. | |
| Price : RM30 | |
| MS ISO 6107-6 : 2004 | |
| Water quality - Vocabulary - Part 6 | |
| This standard defines a sixth list of terms used in certain fields of water quality characterisation. | |
| Price : RM20 | |
| MS ISO 6107-7 : 2004 | |
| Water quality - Vocabulary - Part 7 | |
| This standard defines a seventh list of terms used in certain fields of water qualitycharacterisation. | |
| Price : RM20 | |
| MS ISO 6107-8 : 2004 | |
| Water quality - Vocabulary - Part 8 | |
| This standard defines a eighth list of terms used in certain fields of water quality characterisation. | |
| Price : RM20 | |
| MS ISO 6107-9 : 2004 | |
| Water quality - Vocabulary - Part 9 : Alphabetical list and subject index | |
| This standard consists of an alphabetical list and subject index of all terms in the vocabulary. | |
| Price : RM40 | |
Manufacturing engineering (Vocabularies) |
|
| MS ISO 2806 : 1993 | |
| Industrial automation systems - Numerical control of machines - Vocabulary. | |
| This Malaysian Standard is intended to facilitate national and international communication in the numerical control of machines. It presents terms and definitions of selected concepts relevant to this field and identifies relationships between the entries. | |
| Price Code : D | |
Electrical engineering (Vocabularies) |
|
| MS 400 : Chapter 161 : 1996 | |
| Electrotechnical vocabulary : Chapter 161 : Electromagnetic compatibility (First revision). | |
| This revised
Malaysian Standard specifies requirements for
electrotechnical vocabulary which contains terms and
definitions. This standard is divided into eight sections
as below: 1. Section 161-01 Basic concept. 2. Section 161-02 Disturbance waveforms. 3. Section 161-03 Interference control related terms. 4. Section 161-04 Measurements. 5. Section 161-05 Equipment classification. 6. Section 161-06 Receiver and transmitter terms. 7. Section 161-07 Power controls and supply network impedances. 8. Section 161-08 Voltage changes and flicker. This standard shall supersede MS 400 : Part 1 : Gr. 09 : 1986 |
|
| Price Code : D | |
| MS 400 : Chapter 221 : 1996 | |
| Electrotechnical vocabulary : Chapter 221 : Magnetic materials and components (First revision). | |
| This revised
Malaysian Standard specifies requirements for
electrotechnical vocabulary which contains terms and
definitions. This standard are divided into five sections
as below: 1. Section 221-01 General. 2. Section 221-02 State of magnetization. 3. Section 221-03 Permeability and losses. 4. Section 221-04 Magnetic bodies. 5. Section 221-05 Non-reciprocal electromagnetic. This standard shall supersede MS 400 : Part 1 : Gr. 07 : 1979. |
|
| Price Code : E | |
Information technology. Office machines (Vocabularies) |
|
| MS 826 : Part 8 : 1991 | |
| Vocabulary for information processing systems : Part 8 : Control, integrity and security. | |
| This
standard is intended to facilitate international
communication in information processing. It presents
terms and definitions of selected concepts relevant to
the field of information processing and identifies
relationships between the entries. |
|
| Price Code : B | |
| MS 826 : Part 9 : 1992 | |
| Information processing systems - Vocabulary : Part 9 : Data communication. | |
| This part of Malaysian Standard deals with the data communication terms that are most commonly used in the data processing community. | |
| Price Code : B | |
| MS 826 : Part 10 : 1986 | |
| Glossary of terms used in data processing : Part 10 : Operating techniques and facilities. | |
| The
vocabulary is intended to facilitate international
communication in data processing. It presents terms and
definitions of selected concepts relevant to the field of
data processing and identifies relationships between the
entries. |
|
| Price Code : B | |
| MS 826 : Part 13 : 1992 | |
| Information processing systems : Vocabulary : Part 13 : Computer graphics. | |
| This part of
Malaysian Standard deals with the representation and
storage of images, the addressing techniques and
concepts, the functional units, the processes and methods
of operations |
|
| Price Code : B | |
| MS 826 : Part 18 : 1992 | |
| Information processing system : Vocabulary : Part 18 : Distributed data processing. | |
| This part of
Malaysian Standard defines the most currently used
concepts in distributed data processing. It deals in
particular with the topology and the functions of
network. |
|
| Price Code : B | |
| MS 826 : Part 21 : 1992 | |
| Information processing system : Vocabulary : Part 21 : Interfaces between process computer system and technical process. | |
| The purposes
of this standard is to provide definitions that are
rigorous, uncomplicated and which can be understood by
all concerned. The scope of each concept defined has been
chosen to provide a definition that is suitable for
general application. In those circumstances, where a
restricted application is concerned, the definition may
need to be more specific. |
|
| Price Code : B | |
| MS 826 : Part 22 : 1992 | |
| Information processing system : Vocabulary : Part 22 : Calculators. | |
| This part of
Malaysian Standard deals with calculators. It concerns
the main operating processes and types of machines used,
their functions and technical parts. |
|
| Price Code : B | |
| MS ISO/IEC 2382-23 : 1996 | |
| IT - Vocabulary : Part 23 : Text processing. | |
| This
Malaysian Standard presents, in English and French, 106
terms, in the following fields : text processing, text
editors, text output and text editing. In order to
facilitate their translation into other languages, the
definitions are drafted so as to avoid, as far as
possible, any peculiarity attached to the language. |
|
| Price Code : C | |
| MS ISO/IEC 2382-26 : 1995 | |
| Information technology - Vocabulary : Part 26 : Open Systems Interconnection. | |
| This
Malaysian Standard presents, in English and French, 66
terms in the following fields : general terms, layers,
services and protocols, connection, application service
elements, miscellaneous. In order to facilitate their
translation into other languages, the definitions are
drafted so as to avoid, as far as possible, any
peculiarity attached to the language. |
|
| Price Code : D | |
| MS IEC 60824 : 1993 | |
| Vocabulary - Terminology related to microprocessors. | |
| This
Malaysian Standard is intended to provide consistency in
the terms and concepts used in the field of
microprocessors systems. It presents terms and
definitions of selected concepts relevant to this field
and identifies relationships between the entries. |
|
| Price Code : B | |
Road vehicle engineering (Vocabularies) |
|
| MS 493 : 1977 | |
| Vocabulary relating to controls, indicators and tell tales of motor vehicles (excluding motor cycles). | |
| Establishes terms relating to controls, lamps, indicators and tell-tales used on motor-driven vehicles. | |
| Price Code : B | |
Materials Handling Equipment (Vocabularies) |
|
| MS ISO 2532 : 2001 | |
| Steel wire ropes - Vocabulary | |
| Gives a classified list of steel wire ropes. | |
| Price Code : F | |
| MS ISO 4306-2 : 2002 | |
| Cranes - Vocabulary - Part 2 : Mobile cranes | |
| This Malaysian Standard establishes a vocabulary of the most commonly used terms in the field of cranes. This standard defines the terms relating to the basic types of self-powered mobile cranes. | |
| Price Code : B | |
| MS ISO 4306-3 : 2001 | |
| Cranes - Vocabulary : Part 3 : Tower cranes | |
| Establishes a vocabulary of the most commonly used terms in the field of cranes. This standard gives the general definitions of a tower crane and the terminology of each type of tower crane. | |
| Price Code : C | |
Packaging and distribution of goods (Vocabularies) |
|
| MS 478 : 1999 | |
| Freight containers - Terminology (First revision). | |
| Presents definitions of terms relating to freight containers. This standard supersedes MS 478 : 1976. | |
| Price Code : B | |
| MS 483 : 1976 | |
| Vocabulary of terms relating to pallets. | |
| Gives terms and definitions with illustrations relating to common types of pallets and their components. | |
| Price Code : B | |
| MS 485 : Part 4 : 1976 | |
| Glossary of packaging terms : Part 4 : Paper and board packaging. | |
| Gives terms and definitions on paper and board, bags, sacks and envelopes, paperboard cartons, paperboard composites, fibreboard and fibreboard drums. | |
| Price Code : D | |
| MS 485 : Part 5 : 1978 | |
| Glossary of packaging terms : Part 5 : Glass containers and closures. | |
| Terms and definitions on glass containers, metal closures, moulded closures, closure liners and wads, closure lining compounds, cork and corks, rubber closure sealing rings and discs. | |
| Price Code : F | |
| MS 1425 : Part 1 : 1997 | |
| Glossary of terms for packaging : Part 1 : General (Including auxilliary materials). | |
| Gives term and definition for packaging, including auxiliary materials. | |
| Price Code : C | |
| MS 1425 : Part 2 : 1997 | |
| Glossary of terms for packaging : Part 2 : Plastic and flexible packaging materials. | |
| Gives terms and definition for plastic and flexible packaging. | |
| Price Code : B | |
| MS 1425 : Part 3 : 1997 | |
| Glossary of terms for packaging : Part 3 : Plastics sacks. | |
| Gives terms and definition for plastic pack packaging. | |
| Price Code : B | |
| MS 1561 : 2002 | |
| Pallets for materials handling – vocabulary. | |
| This Malaysian Standard defines terms relating to pallets for unit load methods of materials handling. It also includes informative appendices listing terms related to slip sheets and general terms related to materials handling. | |
| Price Code : E | |
| MS ISO 445 : 2000 | |
| Pallets for materials handling : Vocabulary | |
| Defines terms relating to pallets for unit load methods of materials handling. This standard supersedes MS 1171 : 1989. | |
| Price Code : B | |
| MS 1561 : 2002 | |
| Pallets for materials handling – vocabulary | |
| This Malaysian Standard defines terms relating to pallets for unit load methods of materials handling.It also includes informative appendices listing terms related to slip sheets and general terms related to materials handling | |
| Price : RM60 | |
Textile and leather technology (Vocabularies) |
|
| MS 462 : 1984 | |
| Glossary of leather terms (First revision). | |
| Defines
terms used in the leather trade which are of interest to
tanners or their customers or the general public. |
|
| Price Code : D | |
| MS 1192 : Part 1 : 1991 | |
| Glossary of textile terms : Part 1 : Textile processing and manufacture. | |
| This is the
first part of a three-part glossary and the terms covered
here relate to the following aspects: (a) fibres, yarns and fabrics (b) spinning , weaving, knitting and miscellaneous production methods (c) textile end products and sundry goods |
|
| Price Code : XC | |
| MS 1192 : Part 2 : 1991 | |
| Glossary of textile terms : Part 2 : Finishing and chemical processing of textiles | |
| This second
part of the glossary covers all terms related to
finishing and chemical processing of textiles. Terms not Covered here may be found in Part 1 and Part 3. |
|
| Price Code : C | |
| MS 1192 : Part 3 : 1991 | |
| Glossary of textile terms : testing, inspection and general. | |
| This Part of
the glossary covers all terms related to testing and
inspection as well as general terms not found in Part 1 and Part 2. |
|
| Price Code : D | |
Textile and leather technology (Vocabularies) |
|
| MS 462 : 1984 | |
| Glossary of leather terms (First revision). | |
| Defines
terms used in the leather trade which are of interest to
tanners or their customers or the general public. |
|
| Price Code : D | |
| MS 1192 : Part 1 : 1991 | |
| Glossary of textile terms : Part 1 : Textile processing and manufacture. | |
| This is the
first part of a three-part glossary and the terms covered
here relate to the following aspects: (a) fibres, yarns and fabrics (b) spinning , weaving, knitting and miscellaneous production methods (c) textile end products and sundry goods |
|
| Price Code : XC | |
| MS 1192 : Part 2 : 1991 | |
| Glossary of textile terms : Part 2 : Finishing and chemical processing of textiles | |
| This second
part of the glossary covers all terms related to
finishing and chemical processing of textiles. Terms not Covered here may be found in Part 1 and Part 3. |
|
| Price Code : C | |
| MS 1192 : Part 3 : 1991 | |
| Glossary of textile terms : testing, inspection and general. | |
| This Part of
the glossary covers all terms related to testing and
inspection as well as general terms not found in Part 1 and Part 2. |
|
| Price Code : D | |
Agriculture (Vocabularies) |
|
| MS 323 : 1976 | |
| Specification for provisional common names for pesticides (First list). | |
| Gives provisional common names for pesticides and includes their established chemical names, structural formulae and uses. | |
| Price Code : B | |
| MS 326 : 1976 | |
| Recommended common names for pesticides (First list). | |
| Gives recommended common names, structural formulae and uses for pesticides. | |
| Price Code : C | |
| MS 455 : 1976 | |
| Specification for glossary of terms for animal feeding stuffs. | |
| Terms grouped under products from animal, barley, brewers' and distillers' com, cottonseed, hay linseed and flax, marine milk etc. | |
| Price Code : B | |
| MS 546 : 1994 | |
| Recommended nomenclature for Malaysian vegetables (First revision). | |
| This Malaysian Standard (1st list) gives the botanical nomenclature, common names and other names for spices of commonly used vegetables in Malaysia. | |
| Price Code : B | |
| MS 587 : 1979 | |
| Recommended nomenclature for flour, starch, derivatives and by-products. | |
| Terms defined are classified under general terms, source materials, technology products and analytical terms which are frequently used in trade and industries. | |
| Price Code : B | |
Food technology (Vocabularies) |
|
| MS 900 : 1991 | |
| Nomenclature for spices and condiments : First list (Bilingual : English-Bahasa Malaysia) (First revision). | |
| Tabulates out the botanical name, part used, common English name and common Malaysian name for a list of spices and condiments. | |
| Price : RM10 | |
| MS 1129 : 1989 | |
| Vocabulary for coffee and its products. | |
| Defines the most commonly used terms relating to coffee and its products. | |
| Price :RM10 | |
| MS 1129 : 1989 | |
| Istilah kopi dan hasil-hasil kopi. | |
| Harga : RM10 | |
| MS ISO 6078 : 1994 | |
| Glossary of terms for black tea. | |
| This Malaysian Standard provides a list of terms and definitions, applicable to the techniques of processing and assessing black for commerce. Information on grades of black tea is also included. | |
| Price : RM30 | |
Chemical technology (Vocabularies) |
|
| MS ISO Guide 30 : 1996 | |
| Terms and definitions used in connection with reference materials. | |
| This Malaysian Standard recommends the use of terms and meanings in connection with reference materials, certified reference, certification and issuance of reference materials as well as terms related to measurement and testing. It serves as a guide to ensure conformity in terminology in production and use of reference materials, in reports and certificates. This standard is a total adoption of ISO Guide 30 : 1992. | |
| Price Code : B | |
Mining and minerals (Vocabularies) |
|
| MS 799 : 1982 | |
| Glossary of mining terms. | |
| Defines common terms in mineral processing and mine management. Applicable to mining by the common practices of dredging, gravel pumping, open-casting and underground working in Malaysia. | |
| Price Code : C | |
| MS 865 : 1983 | |
| Glossary of drilling and blasting terms. | |
| Defines terms and various types of explosives, especially in the context of their usage in the mining industry. | |
| Price Code : C | |
Petroleum and related technologies (Vocabularies) |
|
Wood technology (Vocabularies) |
|
| MS 229 : 1988 | |
| Nomenclature and users of commercial timbers of Malaysia (First revision). | |
| Common and botanical names of 53 species or groups of species of timber exported from Malaysia are listed. | |
| Price Code : B | |
| MS 471 : Part 1 : 2001 | |
| Glossary of terms relating to timber and wood-based panel products : Part 1 : Characteristics and properties of timber (First revision) | |
| This Malaysian Standard is intended to provide uniformity in the definitions of the terms used in the Malaysian timber industry. This part deals with characteristics and properties of timber, including the stage of primary conversion but excluding the various products and processes of secondary manufacture. Structure, properties and defects of wood, both in the raw and converted states are, however, included. This standard supersedes MS 471 : 1976. | |
| Price Code : E | |
| MS 471 : Part 2 : 2003 | |
| Glossary of terms related to timber and wood-based panel products : Part 2 : Wood-based panel products. | |
| This Malaysian Standard is intended to provide uniformity in the definitions of the terms used in the Malaysian timber industry. This standard deals with wood-based panel products. | |
| Price : RM30 | |
| MS 471 : Part 3 : 2003 | |
| Glossary of terms related to timber and wood-based panel products : Part 3 : Carpentry, joinery and furniture | |
| This Malaysian Standard is intended to provide uniformity in the definitions of the terms used in the Malaysian timber industry. This standard deals with carpentry, joinery and furniture. | |
| Price : RM30 | |
| MS 1030 : 1986 | |
| Glossary of terms used in wood preservation. | |
| Terms relating to attack of timber by wood-destroying agencies and to processes for preservation against attack. General preservation; terms associated with preservative treatments; miscellaneous. | |
| Price Code : B | |
| MS 1714 : 2003 | |
| Specification for visual strength grading of tropical hardwood timber | |
| This Malaysian Standard specifies a method of strength grading tropical hardwood timber visually for structural use. The timber shall at least be surface dry. For tropical hardwoods, the permissible limits of characteristics for a single visual strength grade of timber are specified, designated Select Structural Grade, Standard Structural Grade, Common Building Grade and Hardwood Structural Grade. This Malaysian Standard applies to tropical hardwood timber graded both in Malaysia and abroad for seasoned timber either rough sawn or dressed, preservative treated or not. Timber imported from abroad shall be regarded in accordance to this Malaysian Standard before it is allowed to be used for structural application. Re-grading is not needed if the timber is graded by a certified body that is approved by the grading authority in Malaysia, provided that it is not re-sawn into smaller sizes. Where Malaysian Standards covering specific end use requirements specify permissible limits varying from those given in this standard, the requirements of those standards will replace or be additional to the requirements of this standard. NOTE. Additional requirements for laminations are given in MS 758:2001. | |
| Price : RM40 | |
Rubber and plastics industries (Vocabularies) |
|
| MS 562 : 1978 (R-2002) | |
| Glossary of terms used in the adhesives industry. | |
| Makes provisions for uniformity in the definitions of terms used in the local adhesives industry and practice. | |
| Price Code : L | |
Paper technology (Vocabularies) |
|
| MS 732 : 1981 | |
| Paper, board, pulp and related terms - Vocabulary. | |
| Defines general terms, terms used in pulp manufacture, types of pulp, paper and board, paper making, types of paper and board, converted products and their properties. | |
| Price Code : D | |
Paint and colour industries (Vocabularies) |
|
| MS 904 : 1984 | |
| Glossary of terms used in the paint trade and industry. | |
| Defines of over 5004 terms used in the paint industry including terms describing types of finish, applications and film defects. | |
| Price Code : G | |
Quantities and units |
|
| MS 558 : 1978 | |
| Code of practice for the presentation of numerical values. | |
| Gives definitions and examples on types of numerical values, number of significant figures and number of decimal places. Procedures for number of significant figures to retain, rounding of numbers and layout of numbers also provided. | |
| Price Code : C | |
| MS ISO 31-0 : 2003 | |
| Quantities and units – Part 0: General principles. | |
| This part of MS ISO 31 gives general information about principles concerning physical quantities, equations, quantity and units symbols, and coherent unit systems, especially the International System of Units, SI. | |
| Price Code : D | |
| MS ISO 31-1 : 2003 | |
| Quantities and units – Part 1: Space and time. | |
| This part of MS ISO 31 gives names and symbols for quantities and units of space and time. Where appropriate, conversion factors are also given. | |
| Price Code : C | |
| MS ISO 31-2 : 2003 | |
| Quantities and units – Part 2: Periodic and related phenomena. | |
| This part of MS ISO 31 gives names and symbols for quantities and units of periodic and related phenomena. Where appropriate, conversion factors are also given. | |
| Price Code : B | |
| MS ISO 31-3 : 2003 | |
| Quantities and units – Part 3: Mechanics. | |
| This part of MS ISO 31 gives names and symbols for quantities and units of mechanics. Where appropriate, conversion factors are also given. | |
| Price Code : C | |
| MS ISO 31-4 : 2003 | |
| Quantities and units – Part 4: Heat. | |
| This part of MS ISO 31 gives names and symbols for quantities and units of heat. Where appropriate, conversion factors are also given. | |
| Price Code : C | |
| MS ISO 31-5 : 2003 | |
| Quantities and units – Part 5: Electricity and magnetism. | |
| This Malaysian Standard is identical with ISO 31-5:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and units of electricity and magnetism. Where appropriate, conversion factors are also given. | |
| Price Code : B | |
| MS ISO 31-6 : 2003 | |
| Quantities and units – Part 6: Light and related electromagnetic radiations. | |
| This Malaysian Standard is identical with ISO 31-6:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and unit of light and related electromagnetic radiations. Where appropriate, conversion factors are also given. | |
| Price Code : D | |
| MS ISO 31-7 : 2003 | |
| Quantities and units – Part 7: Acoustics. | |
| This Malaysian Standard is identical with ISO 31-7:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and units of acoustics. Where appropriate, conversion factors are also given. | |
| Price Code : C | |
| MS ISO 31-8 : 2003 | |
| Quantities and units – Part 8: Physical chemistry and molecular physics. | |
| This Malaysian Standard is identical with ISO 31-8:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and unit of physical chemistry and molecular physics. Where appropriate, conversion factors are also given. | |
| Price Code : D | |
| MS ISO 31-9 : 2003 | |
| Quantities and units – Part 9: Atomic and nuclear physics. | |
| This Malaysian Standard is identical with ISO 31-9:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and unit of atomic and nuclear physics. Where appropriate, conversion factors are also given. | |
| Price Code : D | |
| MS ISO 31-10 : 2003 | |
| Quantities and units – Part 10: Nuclear reactions and ionizing radiations. | |
| This Malaysian Standard is identical with ISO 31-10:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and unit of nuclear reactions and ionizing radiations. Where appropriate, conversion factors are also given. | |
| Price Code : D | |
| MS ISO 31-13 : 2003 | |
| Quantities and units – Part 13: Solid state physics. | |
| This Malaysian Standard is identical with ISO 31-13:1992 and its Amendment 1:1998. This Malaysian Standard gives names and symbols for quantities and unit of solid state physics. Where appropriate, conversion factors are also given. | |
| Price Code : C | |
| MS ISO 1000 : 2000 | |
| SI Units and recommendations for the use of their multiples and of certain other units | |
| Describes the International Systems of Units; recommends selected decimal multiples and sub-multiples of SI units for general use and gives certain other units which may be used with the International Systems of Units; and quotes the definitions of the SI base units. This standard supersedes MS 492 : 1977. | |
| Price Code : C | |
Graphical symbols |
|
01.080.04 |
Graphical symbols in general |
| MS IEC 60617-2 : 2004 | |
| Graphical symbol for diagrams – Part 2 : Symbol elements qualifying symbol and other symbols having general application | |
| This Malaysian Standard is identical with IEC 60617-2:2002, Database Snapshot, Graphical symbols for diagrams - Part 2: Symbol elements qualifying symbols and other symbols having general application, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standardl cancels and replaces MS 1072: Part 2:1987, Graphical symbols for diagrams: Part 2: Symbol elements qualifying symbols and other symbols general application. | |
| Price RM170 | |
| MS IEC 60617-3 : 2004 | |
| Graphical symbols for diagrams – Part 3 : Conductors and connecting devices | |
| This Malaysian Standard is identical with IEC 60617-3:2002, Database Snapshot, Graphical symbols for diagrams - Part 3: Conductors and connecting devices, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: the distribution voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % -10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 3:1987, Graphical symbols for diagrams: Part 3: Conductors and connecting devices. | |
| Price RM70 | |
| MS IEC 60617-4 : 2004 | |
| Graphical symbols for diagrams – Part 4 : Passive components | |
| This Malaysian Standard is identical with IEC 60617-4:2002, Database Snapshot, Graphical symbols for diagrams - Part 4: Passive components, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 4:1987, Graphical symbols for diagrams: Part 4: Passive components. | |
| Price RM60 | |
| MS IEC 60617-5 : 2004 | |
| Graphical symbol for diagrams – Part 5 : Semiconductors and electron tubes | |
| This Malaysian Standard is identical with IEC 60617-5:2002, Database Snapshot, Graphical symbols for diagrams Part 5: Semiconductors and electron tubes, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 5:1987, Graphical symbols for diagrams: Part 5: Semiconductors and electron tubes. | |
| Price RM90 | |
| MS IEC 60617-6 : 2004 | |
| Graphical symbols for diagrams – Part 6 : Production and conversion of electrical energy | |
| This Malaysian Standard is identical to IEC 60617-6:2002, Database Snapshot, Graphical symbols for diagrams - Part 6 : Production and conversion of electrical energy, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 6:1987, Graphical symbols for diagrams: Part 6: Production and conversion of electrical energy. | |
| Price RM130 | |
| MS IEC 60617-7 : 2004 | |
| Graphical symbol for diagrams – Part 7 : Switchgear, controlgear and protective devices | |
| This Malaysian Standard is identical with IEC 60617-7:2002, Database Snapshot, Graphical symbols for diagrams - Part 7: Switchgear , controlgear and protective devices, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolenrances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 7:1987, Graphical symbols for diagrams: Part 7 : Switchgear, controlgear and protective devices | |
| Price RM190 | |
| MS IEC 60617-8 : 2004 | |
| Graphical symbols for diagrams – Part 8 : Measuring instruments, lamps and signalling devices | |
| This Malaysian Standard is identical to IEC 60617-8:2002, Database Snapshot, Graphical symbols for diagrams - Part 8: Measuring instruments, lamps and signalling devices, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 8:1987, Graphical symbols for diagrams: Part 8: Measuring instruments, lamps and signalling devices. | |
| Price RM80 | |
| MS IEC 60617-9 : 2004 | |
| Graphical symbols for diagrams – Part 9 : Telecommunications – Switching and peripherals equipment | |
| This Malaysian Standard is identical to IEC 60617-9:2002, Database Snapshot, Graphical symbols for diagrams - Part 9: Telecommunications – Switching and peripherals equipment, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 9:1987, Graphical symbols for diagrams: Part 9: Telecommunications – Switching and peripherals. | |
| Price RM110 | |
| MS IEC 60617-10 : 2004 | |
| Graphical symbols for diagrams – Part 10 : Telecommunications – Transmission | |
| This Malaysian Standard is identical with IEC 60617-10:2002, Database Snapshot, Graphical symbols for diagrams - Part 10: Telecommunications – Transmissions, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancells and replaces MS 1072: Part 10:1987, Graphical symbols for diagrams: Part 10: Telecommunication: transmission. | |
| Price RM270 | |
| MS IEC 60617-11 : 2004 | |
| Graphical symbol for diagrams – Part 11 : Architectural and topographical installation plans diagrams | |
| This Malaysian Standard is identical with IEC 60617-11:2002, Database Snapshot, Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams, published by the International Electrotechnical Commission (IEC). However, for the purposes of this Malaysian Standard, the following applies: a) the distributions voltage to consumer installation in Malaysia is 240 V for single phase and 415 V for three-phase. The voltage tolerances are +5 % - 10 %. The basis standard (Database Snapshot) is updated frequently. In view of this, this Malaysian Standard is not published. Therefore, the users of this Malaysian Standard will have to access directly to the IEC websites. Access to the database is on a subscription basis (3, 6, 12 and 24 months). Subscriptions can be purchased through the National Committee-appointed Sales Outlets, or directly from the IEC Web Store (simply search for IEC 60617 and you will find the different subscription periods on offer). All subscriptions are subject to the customer agreeing to the IEC Web store Product(s) Licence Agreement. This Malaysian Standard cancels and replaces MS 1072: Part 11:1987, Graphical symbols for diagrams: Part 11: Architectural and topographical installation plans and diagrams. | |
| Price RM170 | |
Public information symbols |
|
| MS IEC 60617-1 : 2003 | |
| Graphical symbols for diagrams, Part 1: General information, general index (First revision). | |
| This Malaysian Standard is identical with IEC 60617-1:1985. This Malaysian Standard contains general information and general index on electrotechnical diagrams. This Malaysian Standard cancels and replaces MS 1072: Part 1:1987. | |
| Price Code : J | |
| MS IEC 60617-12 : 2003 | |
| Graphical symbols for diagrams, Part 12: Binary logic elements (First revision). | |
| This Malaysian Standard is identical with IEC 60617-12:1997. This Malaysian Standard contains graphical symbols which have been developed to represent logic functions. They are intended also to represent physical devices capable of carrying out these functions. The symbols have been prepared with a view to electrical applications, but the majority may also be applied to non-electrical devices, for example pneumatic, hydraulic, mechanical. This Malaysian Standard cancels and replaces MS 1072: Part 12:1987. | |
| Price Code : X | |
Graphical symbols for use on mechanical engineering and construction drawings, diagrams, plans, maps and in relevant technical product documentation |
|
| MS IEC 60617-13 : 2003 | |
| Graphical symbols for diagrams, Part 13: Analogue elements (First revision). | |
| This Malaysian Standard is identical with IEC 60617-13:1993. This Malaysian Standard applies to electrical applications and non-electrical devices, for example pneumatic, hydraulic or mechanical. This Malaysian Standard cancels and replaces MS 1072: Part 13:1987. | |
| Price Code : F | |
Graphical symbols for use on electrical and electronics. |
|
| MS ISO 1891 : 2003 | |
| Fasteners and screw threads – Vocabulary: Part 2: Terminology and nomenclature. | |
| This Malaysian Standard specifies the terminology and nomenclature of bolts, screws, nuts and accessories, which are recommended for use unless otherwise specified in the appropriate product standard. At present, not all of the fasteners and accessories listed are covered by Malaysian Standard publications. The drawings are essentially diagrammatic, in particular those showing bolts and screws having special characteristics dealt with, for example, in Clauses 18 and 19. However, it is recommended that these drawings be used as a base whenever possible. | |
| Price Code : E | |
| Graphical symbols for use on information technology and telecommunication technical drawings and in relevant technical product documentation | |
| MS ISO/IEC 16022 : 2003 | |
| Information technology – International symbology specification – Data matrix. | |
| This Malaysian Standard provides requirements, recommendations and guidelines for a supporting function which is responsible for the management of software product evaluation and for technologies necessary for software product product evaluation. | |
| Price Code : K | |
Technical drawings |
|
Technical drawings in general |
|
| MS 1052 : 1986 | |
| Specification for symbolic representation of welds on drawings. | |
| Specifies the rules to be applied for the symbols representation of welds on drawings. | |
| Price Code : C | |
Information Sciences. Publishing |
|
Documents in administration, commerce and industry |
|
| MS ISO 3166-1 : 2000 | |
| Codes for the representation of names of countries and their subdivisions - Part 1 : Country codes | |
| Intended for use in any application requiring the expression of current country names in coded form; it also includes basic guidelines for its implementation and maintenance. This standard is identical with ISO 3166-1 : 1997 and it supersedes MS ISO 3166 : 1995. | |
| Price Code : G | |
| MS ISO 3166-2 : 2000 | |
| Codes for the representation of names of countries and their subdivisions - Part 2 : Country subdivision codes | |
| Provides the structure of a code for the representation of names of principal administrative divisions, or similar areas, of the countries etc., included in MS ISO 3166-1. Clause 8 contains a list of country subdivision names, together with the code element developed for each one of them. This standard is identical with ISO 3166-2 : 1998 and it supersedes MS ISO 3166 : 1995. | |
| Price Code : M | |
| MS ISO 3166-3 : 2000 | |
| Codes for the representation of names of countries and their subdivisions - Part 3 : Code for formerly used names of countries | |
| Provides principles and maintenance arrangements of a code for the representation of country names. Clauses 8 and 9 contain lists of all formerly used country names together with the code element for each one of them. This standard is identical with ISO 3166-3 : 1999 and it supersedes MS ISO 3166 : 1995. | |
| Price Code : B | |
| MS ISO 4217 : 2000 | |
| Codes for the representation of currencies and funds | |
| Provides the structure for a three-letter alphabetic code and an equivalent three-digit numeric code for the representation of currencies and funds. For those currencies having minor units, it also shows the decimal relationship between such units and the currency itself. This standard also establishes procedures for a Maintenance Agency, and specifies the method of applying for codes. This standard is identical with ISO 4217 : 1995. | |
| Price Code : D | |
|
|
|
