| |
|
25 |
MANUFACTURING ENGINEERING |
Machine tool systems |
|
Modular units and other devices |
|
| MS 1064 : Part 1 : 2001 | |
| Guide to modular coordination in buildings : Part 1 : General principles (First revision) | |
| This scope of this Malaysian Standard is to specify the aims of modular coordination and states the general principles and rules to be applied in determining the dimensions of buildings and the positioning and dimensioning of component, equipment and assemblies. This standard supersedes MS 1064 : Part 1, MS 1064 : Part 2, MS 1064 : Part 3, MS 1064 : Part 4, MS 1064 : Part 5, MS 1064 : Part 6, MS 1064 : Part 7, MS 1064 : Part 11 and MS 1064 : Part 14 : 1988. | |
| Price Code : C | |
| MS 1064 : Part 2 : 2001 | |
| Guide to modular coordination in buildings : Part 2 : Storey heights and room heights (First revision) | |
| This Malaysian Standard specifies sizes of modular storey and modular room heights used in all buildings. This standard also specifies preferred storey height and room height for residential buildings only. This standard supersedes MS 1064 : Part 8 and MS 1064 : Part 12 : 1988. | |
| Price Code : A | |
| MS 1064 : Part 3 : 2003 | |
| Guide to modular coordination in buildings: Part 3: Coordinating sizes and preferred sizes for stairs and stair openings (First revision) | |
| This Malaysian Standard gives general principles for coordinating dimensions of stairs and stair openings in residential, commercial and office and institutional use, and which will fill coordinating spaces in dimensionally coordinated buildings. This Malaysian Standard replaces MS 1064: Part 13:1988. | |
| Price Code : B | |
| MS 1064 : Part 4 : 2001 | |
| Guide to modular coordination in buildings : Part 4 : Coordinating sizes and preferred sizes for doorsets (First revision) | |
| This Malaysian Standard generally specifies the coordinating sizes and preferred sizes for doorsets of all materials.This standard supersedes MS 1064 : Part 9 and MS 1064 : Part 10 : 1988. | |
| Price Code : A | |
| MS 1064 : Part 5 : 2001 | |
| Guide to modular coordination in buildings : Part 5 : Coordinating sizes and preferred sizes for windowsets | |
| This Malaysian Standard specifies coordinating sizes and preferred dimensions for windowsets (external and internal). | |
| Price Code : A | |
| MS 1064 : Part 6 : 2001 | |
| Guide to modular coordination in buildings : Part 6 : Coordinating sizes and preferred sizes for rigid flat sheets (First revision) | |
| This Malaysian Standard specifies coordinating sizes and preferred sizes for rigid flat sheets used in buildings. This standard supersedes MS 1064 : Part 15 : 1988. | |
| Price Code : A | |
| MS 1064 : Part 7 : 2001 | |
| Guide to modular coordination in buildings : Part 7 : Coordinating sizes and preferred sizes for tiles | |
| This Malaysian Standard specifies coordinating sizes and preferred sizes for tiles used in buildings. | |
| Price Code : B | |
| MS 1064 : Part 8 : 2001 | |
| Guide to modular coordination in buildings : Part 8 : Coordinating sizes and preferred sizes for masonry bricks and blocks | |
| This Malaysian Standard gives recommendations for the coordinating sizes and preferred sizes for all types of bricks and blocks except for glass blocks. | |
| Price Code : A | |
| MS 1064 : Part 9 : 2001 | |
| Guide to modular coordination in buildings : Part 9 : Coordinating sizes and preferred sizes for cabinets | |
| This Malaysian Standard specifies coordinating sizes and preferred sizes for cabinets used in buildings. | |
| Price Code : C | |
| MS 1064 : Part 10 : 2001 | |
| Guide to modular coordination in buildings : Part 10 : Coordinating sizes and preferred sizes for reinforced concrete components | |
| This Malaysian Standard specifies the coordinating sizes and preferred sizes for structural reinforced concrete components to be used for buildings, and which will fill coordinating spaces in dimensionally coordinated buildings. | |
| Price Code : B | |
| MS 1064 : Part 13 : 1988 | |
| Guide to modular coordination in buildings : Part 13 : Coordinating dimensions for stairs and stair openings. | |
| Gives general principles for coordinating dimensions of stairs and stair openings in building construction. | |
| Price Code : A | |
| MS 1331 : 2003 | |
| Code of practice for access of disable persons outside buildings (First revision) | |
| This Malaysian Standard specifies the basic requirements for the provision and design of outdoor facilities so as to permit access for people with disabilities. | |
| Price RM30 | |
Machine Tools |
|
| MS IEC 60335-2-45 : 2002 | |
| Safety of household and similar electrical appliances - Part 2 : Particular requirements for portable heating tools and similar appliances | |
| This Malaysian Standard deals with the safety of portable electric heating tools and similar appliances, their rated voltage being not more than 250 V. | |
| Price Code : B | |
Cutting tools |
|
Cutting tools in general |
|
| MS 1203 : 1991 | |
| Specification for brush cutters - Safety requirements. | |
| This Malaysian Standard specifies safety requirements for engine-driven brush cutters intended for use of clearing grass, weeds, brush, shrubs and small trees. | |
| Price Code : B | |
Saws |
|
Hand-held tools |
|
Hand-operated tools |
|
| MS 705 : 1981 | |
| Specification for hand hammers. | |
| Prescribes requirements for the following types of hand hammer: engineer's ball pan, engineer's cores pan, double face sledge, stone breaker's (round eye), stone breakers (oval eye), boiler scaling spiking and keying, spiking and keying (alluate design), keying and spilling. Also includes methods of sampling and testing. | |
| Price Code : B | |
| MS 711 : 1981 | |
| Specification for screwdrivers. | |
| Covers specific characteristics of hand and machine operated screwdrivers for bolt slotted and cross recessed head screws. Includes clause on shapes, dimensions and tolerance of blade; and specifications and test conditions. | |
| Price Code : C | |
Other hand-held tools |
|
| MS 706 : 1981 | |
| Specification for cold chisels. | |
| Covers requirements and test methods for cold cutting of metal of the following types : flat cold, cross cut cold, diamond point cold, and half round nose cold. | |
| Price Code : B | |
Welding, brazing and soldering |
|
| MS 1046 : 1986 | |
| Glossary of welding terms, including terms for brazing, soldering, thermal spraying and thermal cutting. | |
| Defines terms commonly used in the welding and allied industries. It includes terms for brazing, soldering, thermal spraying and thermal cutting. | |
| Price Code : M | |
| MS 1206 : Part 1 : 1991 | |
| Specification for qualification for welders - Fusion welding : Part 1 : Steels. | |
| This Part of the Malaysian Standard specifies requirements for the approval testing of welders and welding operators to be engaged on the manual, semi-automatic and mechanised fusion welding of wrought and cast ferritic steels or austenitic stainless steel fabrications. This standard is not intended to apply to welding operator of automatic welding equipment. | |
| Price Code : C | |
Welding consumables |
|
| MS 518 : 1989 | |
| Specification for covered carbon steel arc-welding electrodes (First revision). | |
| Prescribes requirements for covered carbon steel electrodes for shielded metal-arc welding of carbon and low-alloy steels. | |
| Price Code : E | |
| MS 519 : 1989 | |
| Specification for low-alloy steel covered arc-welding electrodes (First revision). | |
| Prescribes requirements for covered low-alloy steel electrodes for shielded metal arc welding of carbon and low-alloy steels. | |
| Price Code : B | |
| MS 520 : 1989 | |
| Specification for carbon steel electrodes and rods for use with gas shielded arc welding (First revision). | |
| Specifies requirements for bare carbon steel electrodes and rods for use with gas metal arc (GMAW), gas tungsten arc (GTAW) and plasma arc (PAW) welding. The requirements include the chemical composition, mechanical property, impact properties and soundness test. Guide to MS classification of carbon steel filler metals for gas shielded arc welding also specified. | |
| Price Code : C | |
Welding equipment |
|
| MS 949 : 1984 | |
| Code of practice for safety in welding and cutting. | |
| Provides the basic safety requirements in the installation and operation of oxygen fuel gas system for welding and cuttings, arc welding and cutting equipment; and resistance welding equipment. Also deals with fire safety, general and health protection of personnel involved in the operation. | |
| Price Code : D | |
Welded joints |
|
| MS 1317 : Part 1 : 1993 | |
| Recommended practice for radiographic examination of fusion welded joints : Part 1 : Fusion welded butt joints in steel plates up to and including 50 mm thick in thickness. | |
| This Part of the Malaysian Standard applies to the radiographic examination of fusion welded joints in steel up to and including 50 mm thick. It specifies the general techniques and requirements of weld radiography with the object of enabling satisfactory results to be obtained economically. In many cases, the techniques described are also applicable to steel thickness greater than 50 mm; however, the techniques to be used for the thickness of steel greater than 50 mm up to including 200 mm are described in the second part. | |
| Price Code : B | |
| MS 1317 : Part 2 : 1993 | |
| Recommended practice for radiographic examination of fusion welded joints : Part 2 : Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness. | |
| This Part of the Malaysian Standard specifies general techniques requirements of the radiographic examination of fusion welded joints for steel plates thicker than 50 mm and up to and including 200 mm thickness. It is concerned with the radiographic techniques to be used. The techniques are based on generally accepted practice and the fundamental theory of the object. | |
| Price Code : B | |
Brazing and soldering |
|
| MS 870 : 1984 | |
| Specification for soft solder. | |
| Specifies chemical composition, shape, dimension, designation, method of sampling and marking. Includes various grades of tin-lead, tin-lead-antimony and tin-silver alloys. | |
| Price Code : A | |
| MS 964 : 1985 | |
| Specification for resin flux cored solder. | |
| Covers resin-cored solder having one or more continuous cores of flux, either activated or non-activated. A system of classification is given. Requirements include dimensions, flux content, dryness, chlorine content, corrosion, aqueous solution resistance, insulation resistance and spreading. | |
| Price Code : A | |
Surface treatment and coating |
|
| MS 740 : 1981 | |
| Specification for hot-dip galvanized coatings on iron and steel articles. | |
| Specifies requirements and test methods for steel articles galvanized after fabrication and on grey and malleable iron castings. Excludes semi-finished products such as galvanized wire, tube or sheet which are suitable for subsequent fabrication. | |
| Price Code : C | |
Metallic coatings |
|
| MS 407 : 1991 | |
| Specification for zinc coatings on steel wire (First revision). | |
| This
Malaysian Standard specifies the methods of testing zinc
coated steel wires and products fabricated from them to
determine the nominal mass of the zinc coating, its
uniformity and its adhesion. In addition, requirements are specifies (see section three) for mass, uniformity and adhesion of coating on steel wires of circular section in diameters from 0.23 mm to 10.0 mm (Note 1). These requirements are not applicable to articles made from wire have been coated after fabrication. NOTE 1. Coatings in accordance with section three are not necessarily available in every combination of wire size and tensile strength grade and reference should be made to the appropriate Malaysian Standard for the type of wire. |
|
| Price Code : B | |
| |
|