| |
|
ENERGY AND HEAT TRANSFER ENGINEERING |
|
Internal combustion engines |
|
| MS 591 : 1979 | |
| Nomenclature for pistons for internal combustion engines. | |
| Refers to pistons for two and four stroke single acting spark ignition and compression ignition engines. Does not specify piston dimensions but necessary information to enable its determination provided. | |
| Price Code : A | |
| MS 1096 : 1997 | |
| Code of practice for the use of CNG fuel in internal combustion engines (First revision). | |
| This
Malaysian Standard applies to the design, construction,
installation, operation, maintenance and fuelling of
compressed natural gas (CNG) systems where CNG is used
either wholly or in part as a fuel for internal
combustion engines. This standard is directed towards
vehicle installations. Special circumstances exist for industrial trucks with internal combustion engines. Accordingly a separate section is included to cover the special requirements of these trucks. This standard is not intended to cover: (a) The areas where major structural modifications are to be carried to the vehicle. Prior to commencement of such work, guidance should be sought from the vehicle manufacturer. (b) CNG fuel systems for the propulsion of marine craft. (c) CNG fuel systems for stationary combustion engines and gas turbines. This standard supersedes MS 1096 : 1987 |
|
| Price Code : E | |
Heat pumps |
|
| MS ISO 5151 : 2004 | |
| Non-ducted air conditioners and heat pumps – Testing and rating for perfomance | |
| This International Standard specifies the standard conditions on which the ratings of single-package and split-system non-ducted air conditioners employing air- and water-cooled condensers are based, and the test methods to be applied for determination of the various rating. | |
| Price RM50 | |
Heat recover. Thermal insulation |
|
| MS 1532 : 2002 | |
| Thermal insulation - Determination of steady-state thermal transmission properties - Calibrated and guarded hot box | |
| This Malaysian Standard lays down the principles for the design of the apparatus and minimum requirement that shall be met for determination of the laboratory for steady-state thermal transmission properties of building components and similar components for industrial use. It does not, however, specify a particular design since requirements vary, particularly in terms of size, and also to a lesser extent in terms of operating conditions. | |
| Price Code : D | |
| |
|