| |
|
33 |
TELECOMMUNICATIONS AUDIO & VIDEO ENGINEERING |
Telecommunication in general |
|
Telecommunication systems |
|
| MS ISO/IEC 15444-1 : 2003 | |
| Information technology - JPEG 2000 image coding system - Part 1: Core coding system. | |
| This Malaysian Standard specifies the signalling protocol for the support of the Wireless Terminal Authentication Supplementary Services (SS-WTAT and SS-WTAN) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). | |
| Price Code : X | |
Telephone networks |
| MS ISO/IEC 15428 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Location Registration Supplementary Service and Wireless Terminal Information Exchange Additional Network Feature | |
| This Malaysian Standard specifies the Wireless Terminal Location Registration Supplementary Service (SS-WTLR) and the Wireless Terminal Information Exchange Additional Network Feature (ANF-WTINFO), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). | |
| Price RM40 | |
| MS ISO/IEC 15429 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Location Registration Supplementary Service and Wireless Terminal Information Exchange Additional Network Feature | |
| This Malaysian Standard specifies the signaling protocol for the support of the Wireless Terminal Location Registration Supplementary Service (SS-WTLR) and the Wireless Terminal Information Exchange Additional Network Feature (ANF-WTINFO) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). | |
| Price RM60 | |
| MS ISO/IEC 15430 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features | |
| This Malaysian Standard specifies the wireless terminal call handling additional network features (ANF-WTMI, ANF-WTMO), which are applicable to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ISO/IEC 11574. | |
| Price RM50 | |
| MS ISO/IEC 15431 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless terminal call handling additional network features | |
| This Malaysian Standard specifies the signaling protocol for the support of the Wireless terminal call handling additional network features (ANF-WTMI and ANF-WTMO) at the Q reference point between Private Integrated Services Network Exchanges (PINX) connected together within a Private Integrated Services Network (PISN). | |
| Price RM60 | |
| MS ISO/IEC 15432 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features | |
| This Malaysian Standard specifies the authentication supplementary services, which are applicable to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in MS ISO/IEC 11574. | |
| Price RM50 | |
| MS ISO/IEC 15433 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Authentication Supplementary Services | |
| This Malaysian Standard specifies the signaling protocol for the support of the Wireless Terminal Authentication Supplementary Services (SS-WTAT and SS-WTAN) at the Q reference point between Private Integrated Services Network Exchanges (PINXs) connected together within a Private Integrated Services Network (PISN). | |
| Price RM60 | |
| MS ISO/IEC 20161 : 2003 | |
| Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Use of QSIG at the C reference point between a PINX and an interconnecting network | |
| This Malaysian Standard specifies the combination of base standards, together with the selection of appropriate options and parameter values, necessary to specify how QSIG/PSS1 can be used to provide digital signalling capabilities at interfaces at the C reference point between a Private Integrated Services Network Exchange (PINX) and an Interconnecting Network (ICN) to permit interoperability between equipment from different vendors and different public or private service providers. | |
| Price RM30 | |
Other equipment for telecommunication system |
| MS IEC 61643-311 : 2004 | |
| Components for low-voltage surge protective devices – Part 311 : Specification for gas discharge tubes (GDT) | |
| Gas discharge tubes (GDTs)
are used for applications up to 1 000 V a.c or 1 500 V |
|
| Price RM50 | |
| MS IEC 61643-321 : 2004 | |
| Component for low-voltage surge protective devices – Part 321 : Specification for avalanche breakdown diode (ABD) | |
| This part of IEC 61643 is applicable to avalanche breakdown diodes (ABDs) which represent one type surge protective device component (hereinafter referred to as SPDC) used in the design and construction of surge protective devices connected to low-voltage power distribution systems, transmission, and signalling networks. Test specifications in this standard are for single ABDs consisting of two terminals. However, multiple ABDs may be assembled within a single package defined as a diode array. Each diode within the array can be tested to this specification. |
| Price RM40 | |
Integrated Services Digital Network (ISDN) |
|
| MS 1074 : 1987 | |
| Code of practice for the exchange of digital feature coded mapping data. | |
| Specifies requirement for the exchange of graphic map and chart data which is simple, not machine or system dependent and has the maximum likelihood of being implemented at any computer installation. Include rules for recording data, description of feature codes, records, labels, medium for exchange and the preferred datum and projections. | |
| Price Code : G | |
Electromagnetic compatibility (EMC) |
|
| MS CISPR 11 : 2000 | |
| Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement | |
| Applies to
industrial, scientific and medical (ISM) equipment and to
spark erosion equipment. The procedures are given for the
measurement of radio-frequency disturbances and limits
are laid down within the frequency range 9 kHz to 400
GHz. This standard is identical with CISPR 11 : 1997 and
its Amendment 1 : 1999. |
|
| Price Code : E | |
| MS CISPR 12 : 2000 | |
| Vehicles, motorboats and spark-ignited engine-driven devices - Radio disturbance characteristics - Limits and methods of measurement | |
| Applies to
the radiation of electromagnetic energy which may cause
interference to radio reception and which is emitted
from: a) vehicles propelled by an internal combustion
engine, electrical means, or both; b) motor boats
propelled by an internal combustion engine electrical
means, or both; c) devices equipped with spark ignited
internal combustion engine. This standard does not apply
to aircraft, railway traction systems, or to incomplete
vehicle. This standard is identical with CISPR 12 : 1997. |
|
| Price Code : F | |
| MS CISPR 13 : 2000 | |
| Limits and method of measurement of radio interference characteristic of sound and television broadcast receivers and associated equipment | |
| Applies to
the generation of electromagnetic energy from broadcast
sound and television receivers and to their immunity to
all types of interference. The frequency range covered
extends from 9 kHz to 1000 MHz. This standard is
identical with CISPR 13 : 1996 and its Amendment 1 :
1998. |
|
| Price Code : D | |
| MS CISPR 14 : 2000 | |
| Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and electric apparatus | |
| Applies to
the conduction and the radiation of electromagnetic
energy from household electrical equipment, portable
tools and other electrical apparatus which may cause
interference to radio reception, such as office machines,
line or slide projectors, electric toys, recording
apparatus, milking machines, motor-driven electromedical
apparatus, etc; but excluding those producing
high-frequency radiation for heating and therapeutic
purposes. Among portable tools, those with a power in
excess of 2kW are excluded. Separate motors, sold as
such, are also excluded. This standard is identical with
CISPR 14 : 1993 and its Amendment 1 : 1996. |
|
| Price Code : H | |
| MS CISPR 14-1 : 2002 | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission | |
| This Malaysian Standard applies to the conduction and the radiation of radio-frequency disturbances from appliances whose main functions are performed by motors and switching or regulating devices, unless the r.f. energy is intentionally generated or intended for illumination. It includes such equipment as: household electrical appliances, electric tools, regulating controls using semiconductor devices, motor-driven electro-medical apparatus, electric toys, automatic dispensing machines as well as cine or slide projectors. | |
| Price Code : G | |
| MS CISPR 14-1 : 2002 | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission | |
| This Malaysian Standard applies to the conduction and the radiation of radio-frequency disturbances from appliances whose main functions are performed by motors and switching or regulating devices, unless the r.f. energy is intentionally generated or intended for illumination. It includes such equipment as: household electrical appliances, electric tools, regulating controls using semiconductor devices, motor-driven electro-medical apparatus, electric toys, automatic dispensing machines as well as cine or slide projectors. | |
| Price Code : G | |
| MS CISPR 15 : 2000 | |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| Applies to
the emission (radiated and conducted) of radio frequency
disturbances from: - all lighting equipment with a primary function of generating and/or distributing light intended for illumination purpose; and intended either for connection to the low voltage electricity supply or for battery operation; - the lighting part of multi-function equipment where one of the primary functions of this is illumination; - independent auxiliaries exclusively for use with lighting equipment; - UV and 1R radiation equipment; - neon advertising signs; - street/flood lighting intended for outdoor use; - transport lighting (installed in buses and trains). This standard is identical with CISPR 15 : 1996 and its Amendment 1 : 1997 and Amendment 2 : 1998. |
|
| Price Code : G | |
| MS CISPR 21 : 2002 | |
| Intereference to mobile radiocommunications in the presence of impulsive noise - Methods of judging degradation and measures to improve performance | |
| This Malaysian Standard provides methods of judging the degradation of radio communication in the presence of impulsive noise and recommends ways of improving radio performance. | |
| Price Code : B | |
| MS CISPR 23 : 2002 | |
| Determination of limits for industrial, scientific and medical equipment | |
| This Malaysian Standard is to review the position of C.I.S.P.R. limits for the protection of telecommunications from interference from ISM equipment, to clarify the roles of the CCIR and the C.I.S.P.R. in their collaboration in studies on the limits required for this purpose, to summarise the various proposals for methods for specifying limits and to derive from these a recommended method which will meet the objectives of C.I.S.P.R and CCIR. This standard deals only with radiation which occurs outside the bands designated by ITU for ISM use and does not include consideration of data-processing equipment. | |
| Price Code : B | |
| MS CISPR 24 : 2000 | |
| Information technology equipment - Immunity characteristics - Limits and methods of measurement | |
| Applies to information technology equipment (ITE) as defined in CISPR 22. Procedures are defined for the measurement of ITE and limits are specified which are developed for ITE and within the frequency range from O Hz to 400 GHz. The object of this standard is to establish requirements which will provide an adequate level of intrinsic immunity do that the equipment will operate as intended in its environment. This standard is identical with CISPR 24 : 1997. | |
| Price Code : D | |
| MS CISPR 25 : 2002 | |
| Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles : Section 1 : General | |
| This Malaysian Standard contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 1 000 MHz. The standard applies to any electronic/electrical component intended for use in vehicles and large devices. Refer to International Telecommunications Union (ITU) publications for details for frequency allocations. The limits are intended to provide protection for receivers installed in a vehicle from disturbances produced by components/modules in the same vehicle. The methods and limits for a complete vehicle are in Section 2 and the methods and limits for components/modules are in Section 3. | |
| Price Code : E | |
Electromagnetic compatibility in general |
|
| MS 71 : 1972 | |
| Specification for radio interference limits for electrical appliances. | |
| Specifies limits of magnitude of radio-noise voltage in frequency range 0.15 Mhz - 3.0 Mhz, and radio-noise fields in the frequency ranges 0.2 Mhz - 1.605 Mhz and 40 Mhz - 300 Mhz. Applies only to equipment which are directly connected to a distribution system having a declared voltage between conductors not greater than 500 volts, or a declared voltage between one conductor and earth not greater than 250 volts. | |
| Price Code : B | |
| MS 73 : 1972 | |
| Specification for radio interference measuring set for the frequency range 0.015 MHz to 1000 MHz. | |
| Three types of measuring sets are covered, namely quasi-peak measuring set, peak measuring and sine-wave measuring set. These are apparatus used to measure radio-noise voltages and fields produced by electric equipment of all kinds in the frequency range 0.015 MHz - 1000 MHz. | |
| Price Code : D | |
| MS 399 : 1976 | |
| Specification for radio interference limits for the electrical ignition systems of internal combustion engines. | |
| Provides protection for the reception of sound and television signals in the frequency range of 40 Mhz and limits of radiation for the ignition systems on internal combustion engines. Methods of measurement provided. | |
| Price Code : C | |
| MS 588 : 1979 | |
| Specification for radio interference suppression on marine installations. | |
| Specifies limits and methods of measurement for electromagnetic interference by electrical and electronic equipment of a marine installation. Applies only to interference which is generated in the ship. | |
| Price Code : C | |
| MS CISPR 17 : 2003 | |
| Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components. | |
| This MS C.l.S.P.R. publication prescribes methods of measurement of insertion loss of passive radio-frequency suppression filters, which may consist of single elements, such as capacitors, inductors or resistors, or combinations of inductors, capacitors and resistors of either the lumped or distributed types. The methods include those for use in a laboratory or on a production line, utilizing fixed impedance terminations or 'worst case" terminations, those to be used in situ or in model installations, and provide for voltage and current loading. | |
| Price Code : F | |
| MS CISPR 18-1 : 2003 | |
| Radio interference characteristics of overhead power lines and high-voltage equipment – Part 1: Description of phenomena. | |
| This Malaysian Standard applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception, excluding the fields from power line carrier signals. The frequency range covered is 0.15 MHz to 300 MHz. | |
| Price Code : K | |
| MS CISPR 18-2 : 2003 | |
| Radio interference characteristics of overhead power lines and high-voltage equipment – Part 2: Methods of measurement and procedure for determining limits. | |
| This publication applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception, excluding the fields from power line carrier signals. The frequency range covered is 0.15 MHz to 300 MHz. The general procedure for establishing the limits of the radio noise field from the power lines and equipment is given, together with typical values as examples, and methods of measurement. | |
| Price Code : I | |
| MS CISPR 18-3 : 2003 | |
| Radio interference characteristics of overhead power lines and high-voltage equipment – Part 3: Code of practice for minimizing the generation of radio noise. | |
| This Malaysian Standard applies to radio noise from overhead power lines and high-voltage equipment which may cause interference to radio reception, excluding the fields from power line carrier signals. The frequency range covered is 0.15 MHz to 300 MHz. | |
| Price Code : C | |
| MS CISPR 20 : 2001 | |
| Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (First revision) | |
| This Malaysian Standard is applicable to the immunity of sound and television broadcast receivers and associated equipment to ambient electromagnetic fields, induced currents and voltages. The frequency range covered extends from 150 kHz to 1 GHz. This standard supersedes MS CISPR 20 : 2000 | |
| Price Code : I | |
| MS IEC 60050-551-20 : 2003 | |
| International electrotechnical vocabulary: Part 551-20: Power electronics – Harmonic analysis | |
| This Malaysian Standard is identical with IEC 60050-551-20:2001. This Malaysian Standard specifies terms and vocabulary related to power electronics in harmonic analysis. | |
| Price Code : B | |
| MS IEC 60601-1-2 : 2002 | |
| Medical electrical equipment - PART 1 : General requirements for safety 2. Collateral standard: Electromagnetic compatibility - Requirements and tests. Section 1: General) | |
| This Malaysian Standard applies only to MEDICAL ELECTRICAL EQUIPMENT, MEDICAL ELECTRICAL SYSTEMS, INFORMATION TECHNOLOGY EQUIPMENT used in medical electrical application, and all other equipment forming part of medical electrical systems,, hereinafter referred to as EQUIPMENT and/or SYSTEM(S). | |
| Price Code : B | |
| MS IEC 61000-2-2 : 2002 | |
| Electromagnetic compatibility (EMC) Part 2: Environment : Section 2 : Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems | |
| This Malaysian Standard is concerned with conducted disturbances in the frequency range up to 10 kHz with an extension for mains signalling systems. This section gives numerical compatibility levels for low voltage a.c. distribution systems with a nominal voltage up to 240 V, single-phase or 415 V, three-phase and a nominal frequency of 50 Hz or 60 Hz. | |
| Price Code : B | |
| MS IEC 61000-2-4 : 2002 | |
| Electromagnetic compatibility (EMC) Part 2: Environment : Section 4 : Compatibility levels in industrial plants for low-frequency conducted disturbances | |
| This Malaysian Standard gives the requirements for the compatibility levels for industrial and non-public networks. These levels are relevant to disturbances that may occur in the electrical power supply in normal operating conditions. This standard applies to low-voltage and medium-voltage a.c. power supply at 50 Hz/60 Hz. Networks for ships, aircraft, off-shore platforms and railways are out of the scope of this standard. This standard deals with the parameters of voltage deviations (amplitude, frequency, phase-balance and wave-shape) from the ideal sinusoidal voltage that may be expected at the in-plant point of coupling (IPC) within industrial plants or other non-pubic networks. | |
| Price Code : B | |
| MS IEC 61000-2-9 : 2002 | |
| Electromagnetic compatibility (EMC) Part 2: Environment : Section 9 : Description of HEMP environment - Radiated disturbance - Basic EMC publication | |
| This
Malaysian Standard defines the high-altitude
electromagnetic pulse (HEMP) environment that is one of
the consequences of a high-altitude nuclear explosion.
Those dealing with this subject consider two cases: - high-altitude nuclear explosions; - low-altitude nuclear explosions. |
|
| Price Code : C | |
| MS IEC 61000-2-10 : 2002 | |
| Electromagnetic compatibility (EMC) Part 2-10 : Environment - Description of HEMP environment - Conducted disturbance | |
| This
Malaysian Standard defines the high-altitude
electromagnetic pulse (HEMP) conducted environment that
is one of the consequences of a high-altitude nuclear
explosion. Those dealing with this subject consider two
cases: - high-altitude nuclear explosions; - low-altitude nuclear explosions. |
|
| Price Code : E | |
| MS IEC 61000-2-12 : 2003 | |
| Electromagnetic compatibility (EMC)-Part
2-12: Environment-Compatibility levels for low-frequency
conducted disturbances and signalling in public
medium-voltage power supply systems |
|
| This part of MS IEC 61000 is concerned with
conducted disturbances in the frequency range from 0 kHz
to 9 kHz, with an extension up to 148.5 kHz specifically
for mains signalling systems. It gives compatibility
levels for public medium voltage a.c. distribution
systems having a nominal voltage between 1 kV and 35 kV
and a nominal voltage between 1 kV and 35 kV and a
nominal frequency of 50 Hz or 60 Hz. |
|
| Price RM30 | |
| MS IEC 61000-3-2 : 2003 | |
| Electromagnetic compatibility (EMC) - Limits for harmonic current emissions (equipment input current ? 16 A per phase) (First revision) | |
| This Malaysian Standard is identical with IE C 61000-3-2:2001. This Malaysian Standard specifies the limitation of harmonic currents injected into the public supply system and applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems. For systems with nominal voltage less than 250 V (line-to neutral), the limits have not yet been considered. This Malaysian Standard cancels and replaces MS IEC 61000-3-2:2000. | |
| Price Code : D | |
| MS IEC 61000-3-6 : 2001 | |
| Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 6 : Assessment of emission limits for distorting loads in MV and HV power systems - Basic EMC publication | |
| This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large distorting loads (producing harmonics and/or interharmonics) to public power systems. The primary objective is to provide guidance for engineering practices which will ensure adequate service quality for all connected consumers. | |
| Price Code : F | |
| MS IEC 61000-3-7 : 2001 | |
| Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 7 : Assessment of emission limits for fluctuating loads in | |
| This technical report outlines principles which are intended to be used as the basis for determining the requirements for connecting large fluctuating loads (producing flicker) to public power systems. The primary objective is to provide guidance for engineering practices which will ensure adequate service quality for all connected consumers. Since the guidelines outlined in this report are necessarily based on certain simplifying assumptions, there is no guarantee that this approach will always provide the optimum solution for all flicker problems. The recommended approach should be used with flexibility and judgement as far as engineering is concerned, when applying the given assessment procedures in full or in part. | |
| Price Code : E | |
| MS IEC 61000-3-8 : 2001 | |
| Electromagnetic compatibility (EMC) - Part 3 : Limits - Section 8 : Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels | |
| This section of MS IEC 61000-3 applies to electrical equipment using signals in the frequency range from 3 kHz up to 525 kHz to transmit information on low-voltage electrical installations, either on the public supply system or within customers' premises. It specifies frequency bands allocated to different applications (where appropriate), limits for the thermal output voltage in the operating band and limits for conducted and radiated disturbance. It also gives the methods of measurement. It also gives the methods of measurement. It specifies disturbance limits in the frequency range from 3 kHz up to 400 GHz. | |
| Price Code : C | |
| MS IEC 61000-4-1 : 2002 | |
| Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques : Section 1 : Overview of immunity tests. Basic EMC publication | |
| This Malaysian Standard is a basic EMC (electromagnetic compatibility) publication. It considers immunity tests for electric and/or electronic equipment (apparatus and systems) in its electromagnetic environment. Both conducted and radiated phenomena are considered, this includes immunity tests for equipment connected to power, control and communication networks. | |
| Price Code : G | |
| MS IEC 61000-4-3 : 2001 | |
| Electromagnetic compatibility (EMC) - Part 4 : Testing and measurement techniques - Section 3 : Radiated, radio-frequency, electromagnetic field immunity test (First revision). | |
| This section of MS IEC 1000-4 is applicable to the immunity of electrical and electronic equipment to radiated electromagnetic energy. It establishes test levels and the required test procedures. The object of this section is to establish a common reference for evaluating the performance of electrical and electronic equipment when subjected to radio-frequency electro-magnetic fields. This standard supersedes MS IEC 61000-4-3 : 2000. | |
| Price Code : E | |
| MS IEC 61000-4-7 : 2003 | |
| Electromagnetic compatibility (EMC). Part 4-7
: Testing and measurement techniques-General guide on
harmonics and inter harmonics measurements and
instrumentation, for power supply systems and equipment
connected thereto |
|
| This part of MS IEC 61000 is applicable to
instrumentation intended for measuring spectral
components in the frequency range up to 9 kHz which are
superimposed on the fundamental of the power supply
systems at 50 Hz and 60 Hz. For practical considerations,
this standard distinguishes between harmonics, inter
harmonics and other components above the harmonic
frequency range, up to 9kHz. |
|
| Price RM40 | |
| MS IEC 61000-4-9 : 2002 | |
| EElectromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques : Section 9 : Pulse magnetic field immunity test. Basic EMC publication | |
| This
Malaysian Standard relates to the immunity requirements
of equipment, only under operational conditions, to pulse
magnetic disturbances mainly related to: - industrial installations and power plants; - medium voltage and high voltage sub-stations The applicability of this standard to equipment installed in different locations is determined by the presence of the phenomenon, as specified in Clause 3. This standard does not consider disturbances due to capacitive or inductive coupling in cables or other parts of the field installation. |
|
| Price Code : D | |
| MS IEC 61000-4-15 : 2003 | |
| Electromagnetic compatibility (EMC)- Part 4:
Testing and measurement techniques-Section 15:
Flickermeter-Functional and design specifications |
|
| This section of MS IEC 61000-4 gives a
functional and design specification for flicker measuring
apparatus intended to indicate the correct flicker
perception level for all practical voltage fluctuation
waveforms. Information is presented to enable such an
instrument to be constructed. A method is given for the
evaluation of flickers severity on the basis of the
output of flickemeters complying with this standard. |
|
| Price RM30 | |
| MS IEC 61000-4-24 : 2002 | |
| Electromagnetic compatibility (EMC) Part 4 : Testing and measurement techniques : Section 24: Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication | |
| This Malaysian Standard deals with methods for testing protective devices for HEMP conducted disturbance. It primarily covers testing of voltage breakdown and voltage-limiting characteristics but also methods to measure the residual voltage under HEMP conditions for the case of very fast changes of voltage (u) and current (I) as a function of time. | |
| Price Code : B | |
| MS IEC 61000-5-5 : 2002 | |
| Electromagnetic compatibility (EMC) Part 5 : Installation and mitigation guidelines : Section 5 : Specification of protective devices for HEMP conducted disturbance - Basic EMC publication | |
| This Malaysian Standard defines how protective devices for conducted disturbance proposed for HEMP protection shall be specified. It is intended to be used for the harmonization of existing or future specifications issued by protective device manufacturers, electronic equipment manufacturers, administrations and other ultimate buyers. | |
| Price Code : D | |
| MS IEC 61000-6-2 : 2001 | |
| Electromagnetic compatibility (EMC) - Part 6-2 : Generic standards - Immunity for industrial environments | |
| This part of MS IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below, for which no dedicated product or product-family immunity standard exists. Immunity requirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies where no requirements are specified. | |
| Price Code : C | |
| MS IEC 61326-1 : 2002 | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : General requirements | |
| This
Malaysian Standard specifies minimum requirements for
immunity and emissions regarding electromagnetic
compatibility (EMC) for electrical equipment, operating
from a supply of less than 1 000V a.c. or 1 500 V d.c.,
intended for professional, industrial, industrial process
and educational use, including equipment and computing
devices for: - measurement and test; - control; - laboratory use; - accessories intended for use with the above (such as simple handling equipment), intended to be used in industrial and non-industrial locations. |
|
| Price Code : D | |
| MS IEC 61547 : 2002 | |
| Equipment for general lighting purposes - EMC immunity requirements | |
| This
Malaysian Standard for electromagnetic immunity
requirements applies to lighting equipment which is
within the scope of IEC technical committee 34, such as
lamps, auxiliaries and luminaires, intended either for
connecting to a low voltage electricity supply or for
battery operation. Excluded from the scope of this
standard is equipment for which the immunity requirements
are formulated in other IEC or CISPR standards such as: - lighting equipment for use in transport vehicles; - entertainment lighting control equipment for professional purposes; - lighting devices built-in other equipment such as: · scale illumination or indicators; · photocopiers; · slide and overhead projectors; · video display units. |
|
| Price Code : C | |
| MS IEC 61800-3 : 2002 | |
| Adjustable speed electrical power drive systems - Part 3 : EMC product standard including specific test methods | |
| This Malaysian Standard specifies electromagnetic compatibility (EMC) requirements for power drive systems (PDSs). These are adjustable speed a.c. or d.c. motor drives. Requirements are stated for PDSs which are connected to mains supplies with a rated voltage of up to 1 000 V a.c.r.m.s. For supply voltages higher than 1 000V a.c.r.m.s. EMC requirements are under consideration and, until a new publication is produced, they will result from agreement between manufacturer/supplier and user. | |
| Price Code : I | |
| MS IEC 62040-2 : 2002 | |
| Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements | |
| This Malaysian Standard applies to single UPS units or UPS systems comprising a number of interconnected UPS and associated control/switchgear forming a single power system, intended to be installed in any operator accessible area or in separated electrical locations, connected to either industrial or public low voltage supply networks. | |
| Price Code : D | |
Emission |
|
| MS 1555 : 2002 | |
| Electromagnetic compatibility (EMC) - Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A. | |
| This Malaysian Standard deals with the emission of disturbances due to harmonics. Provisions of this standard are applicable to electrical and electronic equipment with a rated input current exceeding 16 A per phase and intended to be connected to public low-voltage a.c. distribution systems of the following types: nominal voltage up to 240 V, single-phase, two or three wires; nominal voltage up to 600 V, three-phase, three or four wires; and nominal frequency 50 Hz or 60 Hz. | |
| Price Code : B | |
Immunity |
|
| MS CISPR 16-1 : 2001 | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1 : Radio disturbance and immunity measuring apparatus (First revision) | |
| This part of MS CISPR 16 is designated a basic standard, which specifies the characteristics and performance of equipment for the measurement of radio disturbance voltages, currents and fields in the frequency range 9 kHz to 18 GHz. In addition, requirements are specified for specialized equipment for discontinuous disturbance measurements. The requirements include the measurement of broadband and narrowband types of radio disturbance. This standard supersedes MS CISPR 16-1 : 2000. | |
| Price Code : U | |
| MS CISPR 16-2 : 2002 | |
| Specification for radio disturbance and immunity measuring apparatus and methods : Part 2 : Methods of measurement of disturbances and immunity : Section 1 : General) | |
| This Malaysian Standard specifies the methods of measurement of EMC phenomena in the frequency range 9 kHz to 18 GHz. | |
| Price Code : I | |
| MS IEC 61000-4-14 : 2003 | |
| Electrotechnical compatibility (EMC) – Part 4-14: Testing and measurement techniques – Voltage fluctuation immunity test | |
| This Malaysian Standard is identical with IEC 61000-4-14:1999. This Malaysian Standard specifies the basic considerations of immunity tests for electrical and/or electronic equipment in their electromagnetic environment, including immunity tests for equipment connected to public and industrial power supply networks. The purpose is to establish a reference for evaluating the immunity of electric equipment when subjected to positive and negative low amplitude voltage fluctuations. It applies to electrical and/or electronic equipment that have a rated input current up to 16 A per phase. It does not apply to electrical and/or electronic equipment connected to d.c. or a.c. 400 Hz distribution networks. | |
| Price Code : B | |
Other aspects related to EMC |
|
| MS IEC 61000-4-30 : 2004 | |
| Electromagnetic compatibility (EMC) – Part 4-30 : Testing and measurement techniques – Power quality measurement methods | |
| This Part of IEC 61000-4 defines the methods for measurement and interpretation of result for power quality parameters in 50/60 Hz a.c. power supply systems. | |
| Price RM100 | |
Components and accessories for telecommunication equipment |
|
Coaxial cables. Waveguides |
|
| MS 765 : 1982 | |
| Recommendation for characteristics impedances and dimensions of radio-frequency coaxial cable. | |
| Details on rated characteristics impedance and associated dimensions over the dielectric for coaxial and flexible twin cables. | |
| Price Code : A | |
| MS 861 : Part 1 : 1983 | |
| Specification for radio-frequency communication cables : Part 1 : General requirements and measuring methods. | |
| Specifies flexible or semi flexible radio frequency cables of coaxial or twin conductor types. Establishes uniform requirements for judging electrical, climatic and mechanical properties and test methods. | |
| Price Code : E | |
Wires and symmetrical cables |
|
| MS 798 : 1982 | |
| Guide to the calculation of resistance of plain and tinned copper conductors of low-frequency cables and wires. | |
| Specifies low frequency cables and wires for telecommunications and also include a general method for calculating the resistance of the copper conductors. | |
| Price Code : A | |
Aerials |
|
| MS 839 : 1983 | |
| Code of practice for the reception of sound and television broadcasting. | |
| Covers recommendations on the aerial systems and wired distribution systems, the necessary structural accommodation for equipment and wiring, protective measures against danger from electric shock, fire and other hazards. Includes general guidance on choice of an appropriate class of sound and television receivers for particular requirements and application. | |
| Price Code : D | |
| MS 943 : 1984 | |
| Specification for electrical safety requirements for room aerials. | |
| Specifies general, constructional, insulation and mechanical strength requirements related with electrical safety only. | |
| Price Code : A | |
Audio, video and audiovisual engineering |
|
| MS IEC 60065 : 2003 | |
| Audio, video and similar electronic apparatus - Safety requirements (First revision). | |
| This Malaysian Standard is identical with IEC 60065:2001. This Malaysian Standard applies to electronic apparatus designed to be fed from the MAINS, from a SUPPLY APPARATUS, from batteries or from REMOTE POWER FEEDING and intended for reception, generation, recording or reproduction respectively of audio, video and associated signals. It also applies to apparatus designed to be used exclusively in combination with the above-mentioned apparatus. This Malaysian Standard primarily concerns apparatus intended for household and similar general use but which may also be used in places of public assembly such as schools, theatres, places of worships and the workplace. PROFESSIONAL APPARATUS intended for use as described above is also covered unless falling specifically within the scope of other standards. This Malaysian Standard concerns only safety aspects of the above apparatus; it does not concern other matters, such as style or performance. This Malaysian Standard applies to the above-mentiones apparatus, if designed to be connected to the TELECOMMUNICATION NETWORK or similar network, for example by means of an integrated modem. This Malaysian Standard cancels and replaces MS IEC 60065:1997. | |
| Price Code : Q | |
| |
|