| |
|
43 |
ROAD VEHICLES ENGINEERING |
Road vehicles in general |
|
| MS 1167 : 1989 | |
| Methods for the vibration testing of motor vehicle parts. | |
| Specifies different classes of vibration test depending on the type of vehicle and on the location of the component within the vehicle. | |
| Price Code : B | |
| MS 1168 : 1989 | |
| Methods for moisture, rain, spray and dip tests for motor vehicle parts. | |
| Specifies various classes of test which will subject components to varying degrees of water exposure. | |
| Price Code : A | |
| MS 1743 : 2004 | |
| Road vehicles - Guidelines for the implementation of the assignment of the world manufacturer identifier (WMI) codes for the vehicle identification number (VIN) systems and for world parts manufacturer identifier | |
| This Malaysian Standards specifies the guidelines relating to the requesting and assignment of the WMI codes and WPMI codes in Malaysian according to MS ISO 3780 and MS ISO 4100 and for the maintenance of the master assignment lists and files. | |
| Price RM10 | |
| MS 1744 : 2004 | |
| Road vehicles - Vehicles Identification number (VIN) - Location and attachment | |
| This Malaysian Standard specifies the requirements for the location and marking of the vehicle identification number (VIN) of motor vehicles, trailers, motorcycles and moped. | |
| Price RM10 | |
| MS ISO 3779 : 1999 | |
| Road vehicles - Vehicle Identification Number (VIN) - content and structure | |
| Specifies the content and structure of a vehicle identification number (VIN) in order to establish, on a world-wide basis, a uniform identification numbering system for road vehicles. This standard is identical with ISO 3779 - 1983. | |
| Price Code : A | |
| MS ISO 3780 : 1999 | |
| Road vehicles - World manufacturer identifier (WMI) code | |
| Specifies the content and structure of an identifier in order to establish, on a world-wide basis the identification of road vehicle manufacturers. This identifier (WMI) is the first section of the vehicle identification number (VIN) described in MS ISO 3779. This standard is identical with ISO 3780 : 1983. | |
| Price Code : A | |
| MS ISO 4100 : 1999 | |
| Road vehicles - World parts manufacturer identifier (WPMI) code | |
| Specifies the content and structure of an identifier in order to establish, on a world-wide basis, the identification of the manufacturers of parts for road vehicles; this identifier may serve, at the manufacturer's option, as a substitute or an addition for various national or international systems which already exist, such as name and address, trade mark, etc. The purpose of this standard is not to prescribe the existence of a marking but to unify its structure when, for whatever reason, it is present. Nor is the purpose to identify each part but merely the manufacturer who has taken the responsibility for it. This standard is identical with ISO 4100 : 1980. | |
| Price Code : A | |
| MS ISO/TS 16949 : 2003 | |
| Quality management systems – Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organisations | |
| This Malaysian Standard specifies requirements for a quality management system where an organisation a)needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements; and b)aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements. NOTE. In this Malaysian Standard, the term “product” applies only to the product intended for, or required by, a customer. | |
| Price Code : D | |
Road vehicles systems |
|
Electrical and electronic equipment |
|
| MS 1166 : 1989 | |
| Methods of test for alternators (with regulators) for motor vehicles. | |
| Specifies test methods and general conditions for the determination of electrical characteristics data alternators for motor vehicles. Both alternators with integral and separate regulators are covered. | |
| Price Code : A | |
Lighting, signaling and warning devices |
|
| MS 654 : 2002 | |
| Specification for reflex reflectors for vehicles, including cycles (First revision) | |
| This
Malaysian Standard specifies requirements for reflex
reflectors for use on motor vehicles, their trailers, and
pedal cycle. It includes tests for the colour and
intensity of the reflected light, resistance to water
penetration, petrol, oil, corrosion, heat and the
adhesion of the mirror backing of reflectors. Reflex
reflectors are classify as follows: Classes l, lA and ll: for the rear of vehicles and cycles; and Classes lll and lllA: for the rear of trailers This standard supersedes MS 654 : 1980. |
|
| Price Code : C | |
| MS 828 : 2003 | |
| Specification for rear marking plates for vehicles (First revision). | |
| This Malaysian Standard specifies requirements for marking plates with retro-reflective materials for fitting to the rear and side of heavy and long vehicles and trailers.This standard includes requirements for colorimetric and photometric properties and tests for physical requirements. | |
| Price Code : C | |
| MS 927 : 1984 | |
| Specification for side, rear, pass parking and stop lamps, and direction indicators for motor vehicles. | |
| Concerns with lighting and signaling equipment for motor vehicles of all types (including motor-cycles, mopeds and scooters). Requirements include the colour of the light, its intensity at various angles, resistance of lamps to vibration, corrosion, oil, penetration of dust and moisture, and war page resistance of plastics lenses. | |
| Price Code : B | |
| MS 1109 : 1988 | |
| Specification for direct current operated sound signaling devices (horns) for motor vehicles. | |
| Specifies performance and quality requirements for direct operated sound signaling devices (horns), for use in motor vehicles. | |
| Price Code : B | |
| MS 1217 : 1991 | |
| Specification for flasher units for motor vehicles. | |
| This Malaysian Standard covers the classification, application and performance of flasher units for motor vehicles. | |
| Price Code : B | |
| MS 1409 : 1997 | |
| Specification for emergency triangular reflector for motor vehicles | |
| This Malaysian Standard prescribes the requirements for reflectorised warning triangle. This standard supersedes MS 31 : 1971 and MS 1391 : 1996 (P). | |
| Price Code : C | |
| MS 1533 : 2002 | |
| Recommended practices in monitoring electric power quality | |
| This recommended practice encompasses the monitoring of electric power quality of single-phase and polyphase a.c. power systems. | |
| Price Code : J | |
| MS 1719 : 2003 | |
| Specification for raised pavement markers (RPM) | |
| This Malaysian Standard specifies the performance requirements and methods of testing for retroreflective and non-retroreflective raised pavement markers, which are bonded or fixed directly onto the road surface. | |
| Price RM50 | |
Indicating and control devices |
|
| MS 493 : 1977 | |
| Vocabulary relating to controls, indicators and tell tales of motor vehicles (excluding motor cycles). | |
| Establishes terms relating to controls, lamps, indicators and tell-tales used on motor-driven vehicles. | |
| Price Code : B | |
| MS 1595 : Part 1 : 2003 | |
| Maximum speed limiter for land based motor vehicles: Part 1: Specification for performance, installation and marking requirements. | |
| This Malaysian Standard specifies the requirements for the performance, installation and marking of a device designed to limit the maximum road speed of land based motor vehicles by automatically controlling the engine power. | |
| Price Code : B | |
| MS 1595 : Part 2 : 2003 | |
| Maximum speed limiter for land based motor vehicles: Part 2: Specification for system and component requirements. | |
| This part of Malaysian Standard specifies the requirements for the performance of systems and components designed, to form a part of a speed limiter, which is intended to limit the maximum road speed of motor vehicles, controlled by the engine power. | |
| Price Code : B | |
Braking systems |
|
| MS 474 : Part 1 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe) Part 1: Specific gravity (First revision). | |
| This Malaysian Standard specifies the method of measuring specific gravity for drum brake linings and disc brake pads to be used for ordinarily used automobiles brakes. | |
| Price Code : A | |
| MS 474 : Part 2 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe) Part 2: Rockwell hardness test (First revision). | |
| This Malaysian Standard specifies the method of Rockwell hardness test for drum brake lining, disc brake pads and clutch facing of automobiles. The hardness obtained by this method is a kind of indentation hardness and it is obtained based on the depth of indentation after removal of the test load. | |
| Price Code : C | |
| MS 474 : Part 3 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 3: Crossbreaking strength (drum brake linings) (First revision). | |
| This Malaysian Standard determines the ultimate stress, due to bending of a specimen with a rectangular cross-section. This Malaysian Standard cancels and replaces MS 474:1976. | |
| Price Code : A | |
| MS 474 : Part 10 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 10: Assessment of friction material and wear (First revision). | |
| This Malaysian Standard establishes a uniform laboratory procedure for securing and reporting the friction and wear characteristic of brake linings. The performance data obtained can be used for in-plant quality control by brake lining manufacturers and for the quality assessment for incoming shipments by the purchasers of brake linings. This Malaysian Standard cancels and replaces MS 474:1976. | |
| Price Code : B | |
| MS 474 : Part 11 : 2003 | |
| Methods of test for automotive friction materials (brake lining, disc pads and bonded shoe): Part 11: Disc brake pads – Evaluation of surface and material flaws after testing. | |
| This Malaysian Standard is identical with ISO 7629:1987. This Malaysian Standard identifies the types of flaws of surface and material after testing of disc brake pads, and specifies the method of measuring these flaws and of setting out the results. This Malaysian Standard applies to disc brake pads intended for fitting to be brakes of road vehicles. | |
| Price Code : A | |
| MS 1077 : Part 9 : 1988 | |
| Method of test for brake fluids : Part 9 : Compatibility. | |
| Prescribes a method to evaluate the compatibility of a brake fluid. | |
| Price Code : A | |
| MS 1077 : Part 10 : 1990 | |
| Methods of test for brake fluids : Part 10 : Resistance oxidation. | |
| Prescribes a method to determine the stability of brake fluid under an oxidative condition. | |
| Price Code : A | |
| MS 1077 : Part 11 : 1990 | |
| Methods of test for brake fluids : Part 11 : Effects on SBR cups. | |
| Prescribes a method for evaluating the effects of a brake fluid in swelling, softening and otherwise affecting standard SBR WC cups. | |
| Price Code : A | |
| MS 1077 : Part 12 : 1990 | |
| Methods of test for brake fluids : Part 12 : Stroking properties. | |
| Describes the method to evaluate the lubricating properties, components compatibility, resistance to leakage, and related qualities of brake fluid by running the sample to the specified procedures. | |
| Price Code : A | |
| MS 1164 : 1989 | |
| Specification for technical requirements for the interchangeability of brake lining materials. | |
| Specifies technical requirements which are considered essential for the purpose of assessing the interchangeability of brake lining materials. The interchangeability of the replacement material will be assessed on the basis of the results of comparative tests. | |
| Price Code : A | |
| MS 1212 : 1991 | |
| Glossary of terms relating to braking of motor vehicle and their trailers. | |
| This Malaysian Standard defines the principal terms of braking and of braking equipment. These terms can designate either the systems or elements involved during the operation of braking or the values characterizing the whole or a part of the said operation. The terms thus defined apply to motor vehicles, i.e. to automotive vehicles, to towed vehicles, and to combinations of vehicles. | |
| Price Code : A | |
| MS ISO 6310 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 4: Compressive strain test method. | |
| This Malaysian Standard specifies a method for test and measurement of the compressive strain of brake linings which is applicable to road – vehicle disk – brake pad assemblies, drum – brake shoe assemblies and friction materials without a backing plate. | |
| Price Code : B | |
| MS ISO 6311 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 5: Internal shear strength of lining material – Test procedure. | |
| This Malaysian Standard specifies a method of measuring the internal shear strength (stress) of brake lining materials.This Malaysian Standard applies to friction materials for disc brake pads and drum brake linings to be used on road vehicle brakes. | |
| Price Code : A | |
| MS ISO 6312 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 6: Shear test procedure for disc brake pad and drum brake shoe assemblies. | |
| This Malaysian Standard specifies a method for measuring the strength of the bond connection between the lining material and the carrier and disc brake pad and drum brake shoe assemblies (shear strength). This Malaysian Standard is applicable to integrally moulded, riveted and bonded assemblies of both types of brake on road vehicles. | |
| Price Code : B | |
| MS ISO 6313 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 7: Effects of heat on dimensions and form of disc brake pads – Test procedure. | |
| This Malaysian Standard specifies a combined method of measuring disc brake pads to determine their dimensional changes in relation to temperature and their resistance to heat transfer. | |
| Price Code : A | |
| MS ISO 6314 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 8: Resistance to water, saline solution, oil and brake fluid – Test procedure. | |
| This Malaysian Standard specifies a laboratory method for exposing samples to detrimental environments, measuring the effect on strength and shape and comparing the results with those from uncontaminated samples. | |
| Price Code : A | |
| MS ISO 6315 : 2003 | |
| Methods of test for automotive friction materials (brake linings, disc pads and bonded shoe): Part 9: Seizure to ferrous mating surface due to corrosion – Test procedure. | |
| This Malaysian Standard specifies a laboratory method for conditioning brake linings in an environment that will promote corrosion, and a test method to assess the strength of bond formed by corrosion. For comparison of lining behaviours, it is essential that the material and condition of ferrous mating surfaces be constant and repeatable. | |
| Price Code : A | |
| MS ISO 6597 : 2004 | |
| Road vehicles - Hydraulic braking systems - Measurement of braking performance | |
| This standard specifies the test method for testing the hydraulic braking systems of road vehicles of categories M and N, as defined in ECE R13. The hydraulic braking systems include vacuum-assisted, compressed air-assisted and power hydraulic-assisted braking systems with hydraulic brakes as well as full power hydraulic braking systems. | |
| Price RM50 | |
| MS ISO 11157 : 2004 | |
| Road vehicles - Brake lining assemblies - Inertia dynamometer test method | |
| This standard specifies a dynamometer test method to homologate alternative types of brake linings (including pads) mounted on original equipment, in accordance with UN-ECE Regulation No. 13 - 08, Annex 15. | |
| Price RM20 | |
Transmissions, suspensions |
|
| MS 771 : 1982 | |
| Specification for land transport leaf springs. | |
| Specifies materials and dimensional requirements, including range of width and thickness for leaf sections, tolerances, the eyes range of recommended bore diameters, dimensions of centre bolts and clips, and fatigue test. | |
| Price Code : B | |
| MS 827 : 2002 | |
| Spark plugs for internal combustion engines (First revision) | |
| This Malaysian Standard specifies dimensional and performance of spark plugs for internal combustion engines. However, the spark plug for aircraft is excluded. This standard supersedes MS 827 : 1983. | |
| Price Code : C | |
| MS 1024 : 1986 | |
| Specification for wheel nuts for passenger vehicles. | |
| Specifies dimensions, materials, mechanical properties, surface finish and test requirements for automotive wheel nuts. | |
| Price Code : B | |
| MS 1107 : 1988 | |
| Specification for steel disc wheels for motor vehicles. | |
| Specifies performance and dimensional tolerances requirements for steel disc wheels to be used for motor vehicles. | |
| Price Code : D | |
Bodies and body components |
|
| MS 75 : 2002 | |
| Specification for anchorages for seat belts (First revision) | |
| This Malaysian Standard specifies basic requirements for the locations and testing of anchorages for seat belts in motor vehicles for the attachment of seat belt assemblies, specified in MS 1175. It applies to all anchorages for seat belts for use by adults in motor vehicles. This standard include anchorages which are integral with the seat structure. Metrical and non metrical dimensions of the threaded holes for the anchorages are included. This standard supersedes MS 75 : 1972. | |
| Price Code : B | |
| MS 595 : Part 1 : 2002 | |
| Specification for safety glass for motor vehicles : Part 1 : General requirements (Second revision). | |
| This Malaysian Standard specifies requirements for safety glass for installation either as windscreens or as other panes or as partitions in motor vehicles and their trailers. Types of glass covered in this part include laminated glass, toughened glass, organic glass and glass-plastics. This scope excludes the following glasses: lighting/light-signalling devices, instrument panels, bullet-proof panes, aggression-resistant glass, panes and non-glass materials. This standard supersedes MS 595 : Part 1 : 1989. | |
| Price Code : B | |
| MS 595 : Part 2 : 1989 | |
| Specification for safety glass for motor vehicles : Part 2 : Methods of test (First revision). | |
| Specifies methods of test to be used for the evaluation of safety glass for motor vehicles. It is to be used in conjunction with Part 1 of this standard which specifies the performance requirements. | |
| Price Code : D | |
| MS 828 : 1983 | |
| Specification for rear marking plates for vehicles. | |
| Specifies marking plate of reflex reflecting and fluorescent materials and is fitted to the rear of certain vehicles and trailers. Tests determine resistance to bending, corrosion, fuel, water, extreme of temperature and abrasion. Includes specification of bonding strength of facing material. | |
| Price Code : B | |
| MS 829 : 1983 | |
| Specification for reflex reflecting number plates. | |
| Specifies requirements for number plates for fitting to motor vehicles. Includes colorimetric and photometric properties, weather resistance test, impact resistance, bonding strength, resistance to bending vibration, corrosion, petrol and extreme temperature and abrasion. Excludes plate size, numbers and margin. | |
| Price Code : B | |
| MS 1154 : 2003 | |
| Specification for webbing for car seat belts (First revision). | |
| The Malaysian Standard applies to webbing used in the construction of automotive seat belts, which depends on the properties of the webbing to control the deceleration of the wearer in an event of accident. This standard supersedes MS 1154:1989. | |
| Price Code : B | |
| MS 1175 : 1989 | |
| Specification for seat belts for motor vehicles (First revision). | |
| Lays down requirements and test methods for motorists' seat belts and harnesses. This standard replaces both MS 74 and MS 559. Manufacturing requirements are specified for the materials used and for the finish of buckles and metal parts. Among the tests specified includes corrosion test, heat resistant test, buckel strength test, dynamic test and static tests. | |
| Price Code : E | |
| MS 1175 : 2003 | |
| Specification for seat belts for motor vehicles (Second revision). | |
| This Malaysian Standard specifies the safety belts and restraint systems which are designed for installation in vehicles and are intended for separate use, i.e. as individual fittings, by persons of adult built occupying forward or rearward-facing seats and to child restraint systems. Manufacturing requirements are specified for the materials used, and for the finish of buckles and metal parts. The tests specified are restricted to the determination of the suitability of a belt or harness assembly and of its components. This standard does not contain provisions concerning the fittings of vehicles with seat belts. Tests are provided to ascertain compliance of the seat belt to the provisions of this Malaysian Standard. | |
| Price Code : F | |
| MS 1216 : 2003 | |
| Specification for retroreflective sign face materials (First revision). | |
| This Malaysian Standard specifies the requirements for coloured retroreflective sheeting materials and screen printed sign face materials for use in the manufacture of permanent and temporary road traffic signs. It also describes the methods of test for each of the requirements specified. This Malaysian Standard replaces MS 1216:1991. | |
| Price Code : E | |
Other road vehicle systems |
|
| MS 475 : 1976 | |
| Specification for automotive V-belt drives. | |
| Applies to endless V-belt and V-grove pulleys used for power transmission for automotive engines in mobile and static applications. Covers dimensions and tolerances of belts and pulleys, recommended marking and performance requirements of belts under standard test conditions. | |
| Price Code : C | |
| MS 707 : 1981 | |
| Specification for industrial safety belts and harness of materials other than leather. | |
| Specifies requirements, definitions of terms, general design, manufacturing of components, test methods for five types of safety belts and harnesses. Includes recommendations on fixtures for attachment. | |
| Price Code : B | |
| MS 1742 : Part 1 : 2004 | |
| Vehicle security systems - Part 1: Guides to the applications of security systems to vehicles | |
| This Malaysian Standard is intended to provide information on the guidance on the various types of security devices and systems that are available, the range of protection devices and systems that are available, the range of protection they offer, and where appropriate the Malaysian Standards to which they should conform | |
| Price RM10 | |
| MS 1742 : Part 2 : Section 1 : 2004 | |
| Vehicle security system - Part 2 : Locking systems - Section 1 : Specification for locking systems | |
| This Malaysian Standard specifies requirements for the performance of locking system fitted to passenger compartment doors and luggage compartment or hatchback doors of passenger cars and car derived vehicles. It does not apply to engine compartment-locking systems. | |
| Price RM20 | |
| MS 1742 : Part 2 : Section 2 : 2004 | |
| Vehicle security systems - Part 2 : Locking systems - Section 2 : Specification for central power locking systems | |
| This Malaysian Standard specifies requirements for the performance of central locking fitted to passenger compartment or hatchbacks doors of passenger cars, engine compartment access, fuel filler aperture lids and sun roof equipment of passenger car and car derived vehicles. | |
| Price RM10 | |
| MS 1742 : Part 2 : Section 3 : 2004 | |
| Vehicle security systems - Part 2: Vehicle locking systems - Section 3: Specification for dead locking systems | |
| This Malaysian Standard specifies requirements for the performance of dead locking systems fitted to passenger compartment doors, luggage compartment or hatchback doors, engine compartment access, fuel filler lids and sun-roof equipment of passenger cars and car derived vehicles | |
| Price RM10 | |
| MS 1742 : Part 3 : 2004 | |
| Vehicle security system : Part 3 : Specification for Alarm Systems | |
| This Malaysian Standard specifies requirements and test methods for vehicle security alarm systems intended as original equipment and for post delivery installation for M1 vehicles. | |
| Price RM50 | |
| MS 1742 : Part 4 : 2004 | |
| Vehicle security system : Part 4 : Specification for immobilizer | |
| This Malaysian Standards specifies requirements for the performance of vehicle security immobilizer system in road vehicles such as private cars, and commercial and heavy good vehicles | |
| Price RM30 | |
| MS ISO 15623 : 2004 | |
| Transport information and control systems – Forward vehicle collision warning systems – Performance | |
| This Malaysian Standard specifies performance requirements and test procedures for systems capable of warning the driver of short inter-vehicle and closing speed which may cause a rear-end collision with other vehicles, including motor cycles, ahead of the subject vehicle while it is operating at ordinary speed. This Malaysian Standard is applicable to operations on roads with curve radii over 125 m as well as higher radius curves. | |
| Price RM30 | |
Internal combustion engines for road vehicles |
|
| MS 775 : 1982 (P) | |
| Specification for LPG fuel system in internal combustion engines. | |
| Applies to design, construction, installation, operation and fuelling of LPG equipment. Appended include garaging, repairing and scrapping of LP gas fuelled vehicles, external inspection of fuel containers and test procedures for pressurized LPG carburetion components. | |
| Price Code : C | |
Electrical equipment. Control systems |
|
| MS 1169 : 1989 | |
| Methods of test and general requirements for starter motors for motor vehicles. | |
| Test conditions and methods for evaluating the performance characteristics of d.c. starter motors mounted on internal combustion engines of motor vehicles are covered. | |
| Price Code : B | |
Bodies and body components |
|
| MS 595 : Part 2 : 2003 | |
| Specification for safety-glass pane for motor vehicles Part 2: Methods of test (Second revision). | |
| This Malaysian Standard specifies details of methods of test used for evaluating requirements for safety-glass panes for motor vehicles. It has to be used in conjunction with Part 1 of this standard. | |
| Price Code : F | |
Motorcycles and mopeds |
|
| MS 932 : 1984 | |
| Specification for rear view mirrors for motorcycles. | |
| Specifies the requirements for glass rear view mirrors for motor vehicles. It specifies materials, dimension and constructional requirements for the mirror, mounting and support arm. In addition, performance tests relating to reflectivity, distortion, torque and corrosion resistance are specified. | |
| Price Code : B | |
| MS 996 : Part 1 : 1985 (P) | |
| Specification for motorcycle chains and sprockets : Part 1 : Motorcycle chains. | |
| Specifies dimensions, material and performance requirements for chains for use on motorcycles. Methods of test are also given. | |
| Price Code : B | |
| MS 1025 : 1986 | |
| Specification for wheel rims for motorcycles. | |
| Establishes dimensions, performance and surface finish requirements for motorcycle wheel rims. Tests to ensure elastic and permanent deformation under load are within acceptable limits also specified. | |
| Price Code : B | |
| MS 1065 : 2001 | |
| Specification for eye protectors for motor cyclists. | |
| Specifies requirements for eye protectors for motor cyclists. It deals with materials, construction, attachment, optical properties, testing, labelling and marking.The standard incorporates the basic requirements for eye protectors capable of maintaining visibility and providing protection for the eyes of motor cyclists. This standard supersedes MS 1065 : 1986 (P). | |
| Price Code : B | |
Cycles |
|
| MS 772 : 1982 | |
| Specification for safety requirements of bicycles. | |
| Covers safety and performance requirements for the design, assembly, sub assemblies and testing of bicycles. Also includes guidelines for instructions on the use and care for bicycles intended for public roads, tests to ensure strength and durability of individual parts and bicycle as a whole. Tests limited to safety consideration and not standardization of components. | |
| Price Code : C | |
| MS 926 : 1984 | |
| Specification for headlamps for pedal cycles. | |
| Specifies colour of light, its intensity at various angles and physical tests on the headlamp unit for pedal cycles which are both battery and dynamo operated. | |
| Price Code : B | |
| |
|