| |
|
55 |
PACKAGING AND DISTRIBUTION OF GOODS |
Packaging and distribution of goods in general |
|
| MS 409 : 1976 | |
| Code of practice for the packaging and storage of pesticides. | |
| Guidance is given on standard sizes, packaging materials and manner of packaging and storage. | |
| Price Code : B | |
| MS 988 : 1985 | |
| Code of practice for packaging : Unit load sizes : Dimensions. | |
| Specifies dimensions for unit load sizes based on the concept of modular system suitable for distribution of goods, comprising of all activities for the movement of products from their origin to their destination. | |
| Price Code : A | |
| MS 989 : Part 1 : 1985 | |
| Code of practice for packaging : Complete, filled, transport packages : Part 1 : Identification of parts when testing. | |
| This first of a series of eleven parts where it serves as a guide for subsequent tests. | |
| Price Code : A | |
| MS 989 : Part 4 : 1985 | |
| Code of practice for packaging : Complete, filled, transport packages : Part 4 : Vertical impact tests by dropping. | |
| Package is raised above the impact surface and released to strike it after a free fall. | |
| Price Code : A | |
| MS 989 : Part 7 : 1985 | |
| Code of practice for packaging : Complete, filled, transport packages : Part 7 : Compression test. | |
| Compression resistance is determined by placing package between the platens of a compression tester. | |
| Price Code : A | |
| MS 989 : Part 9 : 1985 | |
| Code of practice for packaging : Complete, filled, transport packages : Part 9 : Stacking test using compression tester. | |
| Assess performance of package by investing defects like deformation, creep, collapse or failure when subjected to test. | |
| Price Code : A | |
| MS 989 : Part 11 : 1985 | |
| Code of practice for packaging : Complete, filled, transport packages : Part 11 : Rolling test. | |
| Package is rolled so as to impact on each face in turn to determine its ability to withstand the hazard. | |
| Price Code : A | |
| MS 1425 : Pt. 1 : 1997 | |
| Glossary of terms for packaging : Part 1 : General (Including auxiliary materials). | |
| Gives term and definition for packaging, including auxiliary materials. | |
| Price Code : C | |
| MS 1425 : Pt. 2 : 1997 | |
| Glossary of terms for packaging : Part 2 : Plastic and flexible packaging materials. | |
| Gives term and definition for plastic and flexible packaging. | |
| Price Code : B | |
| MS 1425 : Pt. 3 : 1997 | |
| Glossary of terms for packaging : Part 3 : Plastics sacks. | |
| Gives term and definition for plastic pack packaging. | |
| Price Code : B | |
| MS 1513 : Part 5 : Sub. Part 3 : 2003 | |
| Packaging – Transport of dangerous goods : Part 5 : Consignment procedures : Sub-part 3 : Documentation. | |
| This Malaysian Standard provides the requirements for the documentation of dangerous goods for transport. | |
| Price RM20 | |
| MS 1595 : 2003 | |
| Packaging – Transport of dangerous goods: Part 5: Consignment procedures: Sub-part 3: Documentation. | |
| This Malaysian Standard provides the requirements for the documentation of dangerous goods for transport. NOTES: 1. Provisions for the transportation of Class 7 - Radioactive materials are excluded from this part of MS 1513. The transport of radioactive materials shall be in accordance with the Radiation Protection (Transport) Regulations 1989. Radiation Protection (Transport) Regulations 1989 shall not apply where there are provisions in force to the contrary in any international transport regulations for routes using international pathways and for such routes, the transport of radioactive materials shall be in accordance with the provisions provided therein. 2. The requirements in this standard do not preclude the use of electronic data processing (EDP) and electronic data interchange (EDI) transmission techniques as an aid to paper documentation. | |
| Price Code : B | |
| MS ISO 2233 : 2001 | |
| Packaging - Complete, filled transport packages - Conditioning for testing | |
| This Malaysian Standard specifies a method for the conditioning of complete, filled transport packages for testing. This standard supersedes MS 898 : Part 2 : 1985. | |
| Price Code : A | |
| MS ISO 3394 : 2003 | |
| Dimensions of rigid rectangular packages – Transport packages | |
| This Malaysian Standard sets forth a series of dimensions for rigid rectangular transport packages, based on the standard plan dimension (module) of 600 mm x 400 mm (23.62 in x 15.75 in). | |
| Price Code : A | |
| MS ISO 3676 : 2003 | |
| Packaging – Unit load sizes – Dimensions | |
| This Malaysian Standard is based on the concept of a modular system and specifies the plan dimensions for unit loads suitable for distribution of goods, which comprises all activities for the movement of products from their origin to their destination. | |
| Price Code : A | |
| MS ISO 8317 : 2003 | |
| Child-resistant packaging – Requirements and testing procedures for reclosable packages | |
| Price RM20 | |
| MS ISO 10531 : 2000 | |
| Packaging - Complete, filled transport packages - Stability testing of unit loads | |
| Specifies methods of testing for the stability of units loads. These tests are intended to assess the performance of completely formed unit loads as they are subjected to the hazards of environmental exposure, storage, handling and transportation. These tests may be performed as part of a sequence. | |
| Price Code : B | |
| MS ISO 11683 : 2000 | |
| Packaging - Tactile warnings of danger - Requirements | |
| Specifies the requirements for a tactile warning of danger on packagings which contain certain dangerous substances and preparations. This standard does not specify the dangerous substances and preparations to be contained in packagings with a tactile warning of danger. These are to be specified by legislative authorities. | |
| Price Code : B | |
| MS ISO 15394 : 2003 | |
| Packaging – Bar code and two-dimensional symbols for shipping, transport and receiving labels. | |
| This
Malaysian Standard - specifies the minimum requirements
for the design of labels containing linear bar code and
two-dimensional symbols on transport units to convey data
between trading partners; - provides for traceability of
transported units via a unique transport unit identifier
(licence plate); - provides guidance for the formatting
on the label of data presented in linear bar code,
two-dimensional symbol or human readable form; - provides
specific recommendations regarding the choice of bar code
symbologies, specifies quality requirements, classes of
bar code density; - makes recommendations as to label
placement, size and the inclusion of free text and any
appropriate graphics: - provides guidance in the
selection of label material. |
|
| Price Code : F | |
Packaging materials and accessories |
|
| MS 485 : Part 4 : 1976 | |
| Glossary of packaging terms : Part 4 : Paper and board packaging. | |
| Gives terms and definitions on paper and board, bags, sacks and envelopes, paperboard cartons, paperboard composites, fibreboard and fibreboard drums. | |
| Price Code : D | |
| MS 485 : Part 5 : 1978 | |
| Glossary of packaging terms : Part 5 : Glass containers and closures. | |
| Terms and definitions on glass containers, metal closures, moulded closures, closure liners and wads, closure lining compounds, cork and corks, rubber closure sealing rings and discs. | |
| Price Code : F | |
| MS 653 : 1980 | |
| Specification for folders and files. | |
| Definitions and sizes. Includes suspended filing pocket, lever arch file, box file. Spacing and diameter of punched holes for filing. | |
| Price Code : A | |
Sacks. Bags |
|
| MS 957 : 1985 | |
| Specification for jute bags. | |
| Covers constructional details and other particulars of jute bags of dimensions 1015 mm x 710 mm for 100 kg bags and 864 mm x 559 mm for 50 kg bags. | |
| Price Code : B | |
Bottles. Pots. Jars |
|
| MS 1033 : 1986 | |
| Specification for plastic containers for dairy products. | |
| Specifies single-use all plastic containers of the rigid and semi-rigid types intended for the packaging of dairy products. | |
| Price Code : A | |
Cans. Tins. Tubes |
|
| MS 570 : 1978 | |
| Specification for hermetically sealed metal foods cans. | |
| Terms and methods to determine nominal dimensions, capacity and designation of hermatically sealed metal food cans are specified. | |
| Price Code : C | |
| MS 1067 : 1987 | |
| Specification for plastic containers for pharmaceutical use - Other than parental and ophthalmic preparations. | |
| Prescribes requirements for plastic containers for pharmaceutical use excluding parenteral and ophthalmic preparations. | |
| Price Code : B | |
Aerosol containers |
|
| MS 1008 : 1986 | |
| Method of determination of delivery rate of aerosol dispenser. | |
| Gives procedure, calculation and precision of the method. | |
| Price Code : A | |
| MS 1255 : 1992 | |
| Specification for household residual spray aerosols. | |
| This Malaysian Standard prescribes the requirements for insecticidal residual spray in pressurized aerosol dispensers intended for household use against crawling insects. | |
| Price Code : B | |
| MS 1257 : 1992 | |
| Method of determination of delivery rate of aerosol dispenser. | |
| This Malaysian Standard prescribes the requirements for insecticidal space in pressurized aerosol dispensers intended for household use against crawling insects. | |
| Price Code : B | |
| MS 1311 : 1993 | |
| Specification for metal aerosol dispensers for household pesticides. | |
| This Malaysian Standard specifies requirements for materials, constructions, performance and marking for non-refillable metal aerosol dispensers for household pesticides up to 1000 ml maximum brimful capacity and up to 65 mm internal diameter, pressurized by liquefied, dissolved or compressed propellant gases. | |
| Price Code : B | |
| MS 1398 : Part 1 : 1996 | |
| Specification for mosquito electric liquid vaporizer : Part 1 : Physical and chemical requirements. | |
| This Malaysian Standard specifies the requirements and method of test for mosquito electric liquid vaporizer. This standard is not applicable to the electric heating/vaporizer device for use in the evaporation of the active ingredient present in the chemical. This standard prescribes the physical and chemical requirements of the liquid vaporizer which includes the cartridge that contained the formulation, wick and the active ingredients. It also specifies the method of sampling and should be used in conjunction with MS 1398. Specification for mosquito electric liquid vaporizer Part 2 or Part 3. | |
| Price Code : B | |
| MS 1364 : 1994 | |
| Method for the determination of brimful capacity of aerosol cans. | |
| This Malaysian Standard specifies a method for determining the brimful capacities of aerosol cans. It also gives tolerances on capacities. This standard has to be used in conjunction with MS 1255:1992 and MS 1257:1992. | |
| Price Code : A | |
Freight distribution of goods |
|
Freight distribution of goods in general |
|
| MS 478 : 1999 | |
| Freight containers - Terminology (First revision) | |
| Presents definitions of terms relating to freight containers. This standard is technically equivalent to ISO 830 : 1981 and it supersedes MS 478 : 1976. | |
| Price Code : B | |
| MS ISO 1496-1 : 1999 | |
| Series 1 freight containers - Specification and testing - Part 1 : General cargo containers for general purposes | |
| Specifies the basic specifications and testing requirements for ISO series 1 freight containers of the totally enclosed general purpose types and certain specific purpose types (closed, vented, ventilated or open top) which are suitable for international exchange and for the conveyance by road, rail and sea, including interchange between these forms of transport. This standard is identical with ISO 1496-1 : 1990 and it supersedes MS 427 : 1983 and MS 487 : Part 1 : 1991. | |
| Price Code : D | |
| MS ISO 1496-5 : 2000 | |
| Series 1 freight containers - Specification and testing - Part 5 : Platform and platform-based containers | |
| Specifies the basic specifications and testing requirements for ISO series 1 freight containers of the platform and platform-based types designated 1AAA, 1AA, 1A, 1AX, 1BBB, 1BB, 1BX, 1CC, 1C and 1CX which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport, with certain limitations (for example, when loaded, platforms cannot be stacked or top lifted by means of conventional spreaders). This standard is identical with ISO 1496-5 : 1991 and its Amendment 1 : 1993 and Amendment 2 : 1994 and it supersedes MS 487 : Part 5 : 1981 and MS 487 : Part 6C : 1981. | |
| Price Code : F | |
| MS ISO 3874 : 1999 | |
| Series 1 freight containers - Handling and securing | |
| Specifies methods of handling and securing series 1 freight containers built and tested to comply with the latest editions of ISO 1496-1 to ISO 1496-6. Also defines basic principles and procedures to ensure safe operation of containers in all surface modes of transport. Methods of handling and securing are described for both loaded and empty containers. This standard is identical with ISO 3874 : 1988 and it supersedes MS 557 : 1983. | |
| Price Code : D | |
General purpose containers |
|
| MS ISO 668 : 1999 | |
| Series 1 freight containers - Classification, dimensions and ratings | |
| Establishes a classification of series 1 freight containers based on external dimensions, and specifies the associated ratings and where appropriate, the minimum internal and door opening dimensions for certain types of containers. These containers are intended for intercontinental traffic. This standard summarizes the external and some of the internal dimensions of series 1 containers. This standard is identical with ISO 668 : 1995 and it supersedes MS 867 1983. | |
| Price Code : A | |
| MS ISO 1161 : 2000 | |
| Series 1 freight containers - Corner fittings - Specification | |
| Establishes the basic dimensions and the functional and strength requirements of corner fittings for series 1 freight containers, i.e. containers which conform to MS ISO 668 and MS ISO 1496 with the exception of air mode containers. | |
| Price Code : C | |
| MS ISO 1496-2 : 2000 | |
| Series 1 freight containers - Specification and testing - Part 2 - Thermal containers | |
| Gives the basic specifications and testing requirements for ISO series 1 thermal containers which are suitable for international exchange and for coveyance of goods by road, rail and sea, including interchange between these forms of transport. | |
| Price Code : F | |
| MS ISO 1496-3 : 1999 | |
| Series 1 freight containers - Specification and testing - Part 3 : Tank containers for liquids, gases and pressurized dry bulk | |
| Specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which may be loaded or unloaded as liquids by gravity or pressure discharge, for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. This standard supersedes MS487 : Part 3 : 1976. | |
| Price Code : D | |
| MS ISO 3874 : 2000 | |
| Series 1 freight containers - Handling and securing | |
| Specifies methods of handling and securing series 1 freight containers built and tested to comply with the latest editions of MS ISO 1496-1 to MS ISO 1496-5. This standard defines basic principles and procedures to ensure safe operation of containers in all surface modes of transport. Methods of handling and securing are described for both loaded and empty containers. The conditions for lifting different types of loaded and empty containers and also laid down. This standard supersedes MS 557 : 1983. | |
| Price Code : H | |
| MS ISO 6346 : 1999 | |
| Freight containers - Coding, identification and marking | |
| Provides a system for the identification and presentation of information about freight containers. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves. The methods of displaying identification and certain other data (including operational data) on containers by means of permanent marks are included. This standard is identical with ISO 6346 : 1995 and it supersedes MS 1244 : 1991. | |
| Price Code : C | |
General purpose pallets |
|
| MS 483 : 1976 | |
| Vocabulary of terms relating to pallets. | |
| Gives terms and definitions with illustrations relating to common types of pallets and their components. | |
| Price Code : B | |
| MS 1170 : 2000 | |
| Specification for double-deck flat wooden pallets for through transit of goods (First revision) | |
| Covers the dimensions and tolerances of double-deck flat wooden pallets for through transit goods. It also specifies the construction and the expected performance of the pallets but does not cover the method of testing. This standard supersedes MS 1170 : 1989. | |
| Price Code : A | |
| MS 1174 : 2000 | |
| Specification for large wooden pallets for through transit of goods (First revision) | |
| Covers the dimensions and tolerances of large wooden pallets for through transit goods. It also specifies the construction and the expected performance of the pallets but does not cover the method of testing. This standard supersedes MS 1174 : 1989. | |
| Price Code : A | |
| MS 1561 : 2002 | |
| Pallets for materials handling – vocabulary. | |
| This Malaysian Standard defines terms relating to pallets for unit load methods of materials handling. It also includes informative appendices listing terms related to slip sheets and general terms related to materials handling. | |
| Price Code : E | |
| MS ISO 8611 : 2001 | |
| General-purpose flat pallets for through transit of goods - Test methods | |
| This Malaysian Standard specifies test methods for general-purpose flat pallets. The tests are principally intended for the evaluation of existing pallets or of new designs of pallet in relation to their designed load capacity. | |
| Price Code : C | |
Air mode containers, pallets and nets |
|
| MS 487 : Part 7 : 1978 | |
| Specification and testing for ISO series 1 freight containers : Part 7 : Air mode containers. | |
| Sets out basic requirements for the specification and testing of ISO series 1A, 1B, 1C and 1D air mode freight containers for general cargo, which are suitable for international exchange and for conveyance by road, rail and sea as well as air, including interchange between forms of transport. | |
| Price Code : J | |
Complete, Filled transport packages |
|
| MS ISO 2234 : 2002 | |
| Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load | |
| This Malaysian Standard specifies three methods for carrying out a stacking test on a completed, filled transport package, or on a unit load, using a static load. This standard supersedes MS 989 : Part 3 : 1985 | |
| Price Code : B | |
| MS ISO 2244 : 2002 | |
| Packaging - Complete, filled transport packages and unit loads - Horizontal impact tests | |
| This Malaysian Standard specifies methods of horizontal impact testing (horizontal or inclined plane test and pendulum test) on a complete, filled transport package or a unit load. This standard supersedes MS 989 : Part 5 : 1985 | |
| Price Code : B | |
| MS ISO 2247 : 2002 | |
| Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency | |
| This Malaysian Standard specifies methods to carry out vibration tests on complete, filled transport packages or unit loads using sinusoidal excitation at fixed frequency. These tests may be used to assess the performance of packages and unit loads in terms of the strength or the protection that they offer to their contents when subjected to low frequency vibration. These tests may be performed either as a singe test to investigate the effects of low frequency vibration or as a part of a sequence of tests designed to measure the ability of a package or unit load to withstand a distribution system that includes a vibration hazard at low frequency or repetitive shocks. This standard supersedes MS 989 : Part 6 : 1985. | |
| Price Code : B | |
| MS ISO 2873 : 2002 | |
| Packaging - Complete, filled transport packages and unit loads - Low pressure test | |
| This Malaysian Standard specifies a method for subjecting complete, filled transport packages and unit loads to conditions of low air pressure similar to those encountered in aircraft. This method is applicable to complete, filled transport packages and unit loads which are intended to be transported in pressurized aircraft flying at any altitude and in unpressurized aircraft flying at 3 500 m or less. This standard supersedes MS 989 : Part 8 : 1985 | |
| Price Code : A | |
| MS ISO 2875 : 2002 | |
| Packaging - Complete, filled transport packages and unit loads - Water-spray test | |
| This Malaysian Standard specifies a method for testing the resistance of a complete, filled transport package or a unit load to water spray or the protection it gives to its contents from water spray. It may also be used to precondition a complete, filled transport package or a unit load prior to another test to investigate reduction in strength caused by exposure to water. The test is performed on the test specimen as prepared for transport and may form part of a test sequence. This standard superseded MS 989 : Part 10 : 1985. | |
| Price Code : B | |
| MS ISO 11897 : 2004 | |
| Packaging - Sacks made from thermoplastic flexible film - Tear propagation on edge folds | |
| This standard shall specifies a method for the determination, under given conditions, the resistance to tear propagation on an edge fold of sacks made from thermoplastic flexible film. Measurements on folded and unfolded film permit the determination of the residual resistance in the fold. | |
| Price RM10 | |
| MS ISO 13355 : 2004 | |
| Packaging - Complete, filled transport packages and unit loads - Vertical random vibration test | |
| This standard shall specifies a method to carry out a vertical random vibration test on a complete, filled transport packages and unit loads using random excitation. | |
| Price RM10 | |
| MS ISO 15119 : 2004 | |
| Packaging - Sacks - Determination of the friction of filled sacks | |
| This Malaysian Standard specifies three methods for the determination of the friction of filled sacks. | |
| Price RM10 | |
Distribution and vending machines |
|
| MS 1597 : Part 2-73 : 2003 | |
| Household and similar electrical appliances: Part 2-75: Particular requirements for fixed immersion heaters | |
| This clause
of Part 1 is replaced by the following. This Malaysian
Standard deals with the safety of fixed electric
immersion heaters for household and similar purposes that
are intended for installation in a water tank for heating
water to a temperature below its boiling point. The rated
voltage is not more than 250 V for single-phase
appliances and 480 V for other appliances. NOTE 101 The water tank may have alternative means for heating water, such as the circulation of hot water supplied from a separate boiler. NOTE 102 Immersion heaters having a rated power input up to 25 kW for incorporation as an alternative heating source in central heating boilers are also in the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account: the use of appliances by young children or infirm persons without supervision; and playing with the appliance by young children. |
|
| Price RM20 | |
| MS 1597 : Part 2-75 : 2003 | |
| Household and similar electrical appliances: Part 2-75: Particular requirements for commercial dispensing appliances and vending machines | |
| This clause
of Part 1 is replaced by the following: This Malaysian
Standard deals with the safety of electric commercial
dispensing appliances and vending machines for
preparation or delivery of food, drinks and consumer
products, their rated voltage being not more than 250 V
for single-phase appliances and 480 V foe other
appliances. NOTE. Examples of bulk tea or coffee brewing machines ;cigarette vending machines; commercial liquid heaters; espresso coffee appliances; hot and cold beverage vending machines; hot water dispensers; ice cream and whipped cream dispensers; ice dispensers; newspaper, audio or video tape or disc vending machines; packaged food and drink vending machines; and refrigerated merchandisers. As far as practicable, this standard deals with the common hazards presented by appliances that are encountered by users and maintenance persons. However, in general, it does not take into account young children playing with the appliance. |
|
| Price RM40 | |
| |
|