| |
|
59 |
TEXTILE AND LEATHER TECHNOLOGY |
Processes of the textile industry |
|
| MS 1192 : Part 1 : 1991 | |
| Glossary of textile terms : Part 1 : Textile processing and manufacture. | |
| This is the
first part of a three-part glossary and the terms covered
here relate to the following aspects: (a) fibres, yarns and fabrics; (b) spinning, weaving, knitting and miscellaneous productions methods; (c) textile end products and sundry goods. |
|
| Price Code : XC | |
| MS 1192 : Part 2 : 1991 | |
| Glossary of textile terms : Part 2 : Finishing and chemical processing of textiles. | |
| This second
part of the glossary covers all terms related to
finishing and chemical processing of textiles. Terms not
covered here may be found in Part 1 and Part 3. |
|
| Price Code : C | |
| MS 1192 : Part 3 : 1991 | |
| Glossary of textile terms : Part 3 : Testing, inspection and general. | |
| This part of
the glossary covers all terms related to testing and
inspection as well as general terms not found in Part 1
and Part 2 |
|
| Price Code : D | |
Textile fibres |
|
| MS 578 : 1979 | |
| Methods of sampling textile fibres for testing. | |
| Several methods for preparing laboratory samples of fibres such as bast fibres, wool fibres etc. are specified. Also presented is a limited treatment of the problem of drawing specimens for testing. | |
| Price Code : B | |
| MS 661 : 1980 | |
| Method for the determination of length of textile fibres by measuring individual fibres. | |
| Specifies methods of determining fibre length by measurement of individual fibres. Applicable to all discontinuous textile fibre, except those with strong inherent crimp. | |
| Price Code : A | |
Textile fibres in general |
|
| MS 59 : 1972 | |
| Specification for mixed-fibre shirting (polyester and cotton). | |
| Specifies requirements for mixed fibre shirting, bleached or coloured. Type of finish, general appearance, lustre or feel not specified. For methods of test procedures are given only for determination of water-soluble matter and desizing loss and pH value of cold water extract. | |
| Price Code : B | |
| MS 585 : 1979 | |
| Method for the determination of linear density of textile fibres -Gravimetric method. | |
| Two, methods, applicable to bundles of fibres and individual fibres, respectively provided. Not applicable to wool or textured fibres. | |
| Price Code : A | |
| MS 968 : 1985 | |
| Specification for mixed fibres (polyester/cotton) cellular shirting. | |
| Covers only cellular shirting bleached or coloured, which are in great demand. Requirements include cloth construction, dimensions, composition, weight, warp and weft counts, breaking load, tongue tear strength, dimensional changes and colour fastness requirements. | |
| Price Code : A | |
| MS 969 : 1985 | |
| Specification for mixed fibres (polyester/cotton) drill. | |
| Specifies requirements like cloth construction, dimensions, composition, weight, warp and weft counts, breaking load, colour fastness, dimensional changes and tongue tear strength. Does not include all types of drills, only selected ones. | |
| Price Code : A | |
Natural fibres |
|
| MS 693 : 1981 | |
| Method for the determination of breaking tenacity of flat bundles of cotton fibres. | |
| Gives definitions and test methods. Applicable to fibres from new cotton, fibres separated or extracted from manufactured cotton product and fibres tested at nominal gauge length of zero, or at finish gauge length. | |
| Price Code : B | |
| MS 694 : 1981 | |
| Method for the determination of micronaire value of cotton fibres. | |
| For loose disoriented cotton fibres taken from bales, laps and silvers or other sources of lint cotton. | |
| Price Code : B | |
Products of the textiles industry |
|
Textiles in general |
|
| MS 308 : Part 18 : 1975 | |
| Methods of test for colour fastness of textiles : Part 18 : Colour fastness to chlorinated water (swimming bath water). | |
| Assesses
resistance of colour of textiles of all kinds and in all
forms to the action of active chlorine in concentration
which is used to disinfect swimming-bath water
(breakpoint chlorination). |
|
| Price Code : A | |
| MS 335 : 1976 | |
| Method for determination of sulphate content in textile materials. | |
| Prescribes
methods for determining water soluble sulphates present
in textile materials and procedure for extracting textile
materials with water. |
|
| Price Code : B | |
| MS 336 : 1976 | |
| Method for the determination of chloride content of textile materials. | |
| Prescribes
two methods, gravimetric and volumetric for determination
of water-soluble chloride in textile materials and
procedure for extracting the textile materials with
water. |
|
| Price Code : A | |
| MS 337 : 1976 | |
| Method for determination of pH value of aqueous extracts of textile materials. | |
| Prescribes
two methods of determination of pH value of aqueous
extract of textile materials. |
|
| Price Code : A | |
| MS 338 : 1976 | |
| Method for determination of conductivity of aqueous and organic extracts of textile materials. | |
| Prescribes
methods to determine conductivity of aqueous and organic
extracts of textile materials. |
|
| Price Code : B | |
| MS 339 : 1976 | |
| Method for determination of ether-soluble matter in textile materials. | |
| Prescribes
method using Soxhlet apparatus to determine ether soluble
matter in textile materials. |
|
| Price Code : A | |
| MS 340 : 1976 | |
| Specification for a universal system for designating linear density of textiles (Tex system). | |
| States
principles and recommends units of the Tex System,
includes conversion tables for calculating tex values of
numbers or counts in other systems, together with
recommended procedures for the implementation of the Tex
System in trade and industry. |
|
| Price Code : B | |
| MS 343 : 1976 | |
| Methods for estimation of moisture, total size or finish, ash and fatty matter in grey and finished cotton textile materials. | |
| Methods
prescribed applicable to materials where only starch or
tamarind kernel powder or both, and water soluble or
easily soluble finishing agents, such as oils, fats,
China clay have been used. Not applicable for textile
materials that has been given a 'durable' finish such as
synthetic resin treatment. |
|
| Price Code : A | |
| MS 344 : 1976 | |
| Method for determination of water soluble matter of textile materials. | |
| Conditioning
of test specimens, procedure and calculation. |
|
| Price Code : A | |
| MS 346 : 1976 | |
| Method for determination of scouring loss in grey and finished cotton textile materials. | |
| Applicable
to materials where only starch or tamarind kernel powder
or both, and water soluble or easily removable finishing
agents, such as oils, fats, China clay have been used and
which mould normally be removed during the scouring
process. |
|
| Price Code : A | |
| MS 348 : 1976 | |
| Method for estimation of residual chlorine in cotton textile materials. | |
| Method
refers to materials treated with hypochlorite solution. |
|
| Price Code : A | |
| MS 350 : 1976 | |
| Specification for nylon fish-net twines. | |
| Prescribes
constructional details and other particulars of undyed
nylon twines used in the manufacture of fishing nets.
Does not specify type of finish, feel, etc., of the
twines. |
|
| Price Code : B | |
| MS 352 : 1976 (1995) | |
| Specification for netting for fishing - Basic terms and definitions. | |
| Gives
principal terms relating to netting for fishing nets,
together with their definitions or, in some cases, the
method of expressing dimensions. |
|
| Price Code : B | |
| MS 439 : 1976 (1996) | |
| Method for the determination of mesh breaking load of netting for fishing. | |
| Test records
the applied load to extend in a mesh in a wet or dry
state until one of the knots or joints rupture. |
|
| Price Code : B | |
| MS 440 : 1976 (1996) | |
| Methods for the determination of breaking load and knot breaking load of netting yarns for fishing nets. | |
| Test is
performed using a suitable apparatus that indicates the
load rupture for a length of yarn extended in the wet or
dry state. |
|
| Price Code : B | |
| MS 443 : 1976 (1995) | |
| Specification for hanging of netting : Basic terms. | |
| Principal
terms and definitions relating to the hanging of netting
for fishing nets. |
|
| Price Code : A | |
| MS 446 : 1976 | |
| Specification for fish nets - Cutting knotted netting to shape (Tapering). | |
| Defines
different ways to cut knotted netting to shape by
straight cut, the types of cutting (N-, T- and Bar-cut)
and rules for designation of cutting rate. |
|
| Price Code : B | |
| MS 496 : 2003 | |
| Determination of bending strength and flexural rigidity of fabrics | |
| This
standard describes a method for determination of the
bending length and flexural rigidity of textile fabrics
and certain non wovens by means of a fixed-angle
flexometer. The method is not applicable to fabrics that
curl or twist badly when cut into small pieces, nor to
fabrics that show a noticeable time effect when allowed
to bend under their own mass. NOTES: 1. The use of this method for non-wovens should be agreed between the interested parties. 2. The titles of the publicalions referred to in this standard are listed on the inside back cover. |
|
| Price RM20 | |
| MS 542 : 1978 | |
| Method for describing and designating knotted netting for fishing nets. | |
| Gives
information on type of knot, direction of stretch, size
of netting, netting yarns and finish at netting. |
|
| Price Code : B | |
| MS 629 : 1983 | |
| Specifications for fishing nets. | |
| Specifies
requirements for dimensions, stability mesh, size linear
density, breaking load of twin, elongation at breaking
load mesh, breaking load, packing and marking. Includes
methods of selection of mesh samples and tests. |
|
| Price Code : A | |
| MS 736 : 1981 | |
| Specification for cotton mosquito netting, round mesh, bleached or dyed. | |
| Prescribes
requirements such as constructional details, colour
fastness, resistance to microbiological attack etc.,
methods of test and sampling general appearance, feel and
shade of cloth. |
|
| Price Code : A | |
| MS 757 : 1981 | |
| Specification for polyethylene monofilament fishing-net twines. | |
| Manufacture,
requirements, packing, marking and sampling listed. Does
not prescribe type of finish, feel etc. of twines. |
|
| Price Code : A | |
| MS 1192 : Part 1 : 1991 | |
| Glossary of textile terms : Part 1 : Textile processing and manufacture. | |
| This is the
first part of a three-part glossary and the terms covered
here relate to the following aspects: (a) fibres, yarns and fabrics (b) spinning, weaving, knitting and miscellaneous production methods (c) textile end products and sundry goods. |
|
| Price Code : XC | |
| MS 1192 : Part 2 : 1991 | |
| Glossary of textile terms : Part 2 : Finishing and chemical processing of textiles. | |
| This second
part of the glossary covers all terms related to
finishing and chemical processing of textiles. Terms not
covered here may be found in Part 1 and Part 3. |
|
| Price Code : C | |
| MS 1192 : Part 3 : 1991 | |
| Glossary of textile terms : Part 3 : Testing, inspection and general. | |
| This Part of
the glossary covers all terms related to testing and
inspection as well as general terms not found in Part 1
and Part 2. |
|
| Price Code : D | |
| MS 1747 : Bahagian 2 : 2004 | |
| Tekstil – Tenunan Malaysia : Bahagian 2 : Songket Semenanjung | |
| Standard
Malaysia ini memberikan spesifikasi bagi bahan-bahan
mentah yang digunakan dalam proses tenunan songket,
definisi bagi terma-terma yang berkaitan dengan songket
serta proses tenunannya, struktur asas songket, kaedah
penjagaan, kriteria kualiti songket dan penandaan atau
pelabelan songket yang telah siap ditenun. |
|
| Price RM20 | |
| MS ISO 105-A01 : 1996 | |
| Textiles - Tests for colour fastness : Part A01 : General principle of testing | |
| This part of
the Malaysian Standard provides general information about
the methods for testing colour fastness of textiles for
the guidance or users. The uses and the limitations of
the methods are pointed out, several terms are defined,
an outline of the form of the methods is given and the
contents of the clauses constituting the methods are
discussed. This standard shall supersede MS
308:Part:1976. |
|
| Price Code : A | |
| MS ISO 105-A02 : 1996 | |
| Textiles - Tests for colour fastness : Part A02 : Grey scale for assessing change in colour. | |
| This part of
the Malaysian Standard describes the grey scale for
determining changes in colour of textiles in colour
fastness tests and its use. A precise colourimetric
specification of the scale is given as a permanent record
against which newly prepared working standards and
standards that may have changed can be compared. This
standard shall supersede MS 308 : Part 2 : 1976. |
|
| Price Code : A | |
| MS ISO 105-A03 : 1996 | |
| Textiles - Tests for colour fastness : Part A03 : Grey scale for assessing staining. | |
| This part of
the Malaysian Standard describes the grey scale for
determining staining of adjacent fabrics in colour
fastness tests, and its use. A precise colourimetric
specification of the scale is given as a permanent record
against which newly prepared working standards and
standards that may have changed can be compared. This
standard shall supersede MS 308 : Part 3 : 1981. |
|
| Price Code : A | |
| MS ISO 105-A04 : 2003 | |
| Textiles – Tests for colour fastness
– Part A04: Method for the instrumental assessment
of the degree of staining of adjacent factor |
|
| This part of MS ISO 105 specifies an
instrumental method for assessing the degree of staining
of adjacent fabrics in any fastness test, an alternative
to the visual method. |
|
| Price RM10 | |
| MS ISO 105-A05 : 2003 | |
| Textiles – Tests for colour fastness
– Part A05: Instrumental assessment of change in
colour for determination of grey scale rating |
|
| This part of MS ISO 105 specifies an
instrumental method for assessing the change in colour of
a test specimen in comparison to an identical untreated
reference, and the calculations undertaken to convert the
instrumental measurements into a grey scale rating. This
method is intended as an alternative to the many national
methods for visual evaluation of the effect of a colour
fastness test on any textile material |
|
| Price RM10 | |
| MS ISO 105-A06 : 2003 | |
| Textiles – Tests for colour fastness – Part A06 : Instrumental determination of 1/1 standard depth of colour | |
| This method is intended for determining 1/1
standard depth of a dyeing on any textile material by a
colorimetric method as a permitted alternative to the
visual method described in Clause 12 of MS ISO 105-A01.
This method is applicable to 1/1 standard depth of colour
only. |
|
| Price RM10 | |
| MS ISO 105-A08 : 2003 | |
| Textiles – Tests for colour fastness – Part A08 : Vocabulary used in colour measurement | |
| This part of MS ISO 105 specifies the terms and
definitions on colour measurements that are used
throughout MS ISO 105. These definitions are intended to
be used only within the context and scope of MS ISO 105. |
|
| Price RM20 | |
| MS ISO 105-B01 : 1996 | |
| Textiles - Tests for colour fastness : Part B01 : Colour fastness to light : Daylight. | |
| This part of
the Malaysian Standard specifies a method intended for
determining the resistance of the colour of textiles of
all kinds and in all forms to the action of daylight
under prescribed conditions, including protection from
rain, along with eight dyed blue wool references. The
colour fastness is assessed by comparing the change in
colour of the test specimen with that of the references
used. This standard shall supersede MS 308 : Part 4 :
1981 |
|
| Price Code : B | |
| MS ISO 105-B02 : 2001 | |
| Textiles - Tests for colour fastness - Part B02 : Colour fastness to artificial light: Xenon arc fading lamp test | |
| This
standard specifies a method intended for determining the
resistance of the colour of textiles of all kinds and in
all forms to the action of an artificial light source
representative of natural daylight (D65). The method is
also applicable to white (bleached or optically
brightened) textiles. This standard supersedes MS 308 :
Part 5 : 1981. |
|
| Price Code : C | |
| MS ISO 105-B03 : 2002 | |
| Textiles - Tests for colour fastness - Part B03 : Colour fastness to weathering : Outdoor exposure | |
| This Malaysian Standard specifies a method intended for determining the resistance of the colour of textiles of all kinds except loose fibres to the action of weather as determined by outdoor exposure. This standard supersedes MS 308 : Part 41 : 1980. | |
| Price Code : A | |
| MS ISO 105-B04 : 2002 | |
| Textiles - Tests for colour fastness - Part B04 : Colour fastness to artificial weathering: Xenon arc fading lamp test | |
| This
Malaysian Standard specifies a method intended for
determining the resistance of the colour of all kinds,
except loose fibres, to the action of weather as
determined by exposure to simulated weathering conditions
in a cabinet equipped with a xenon arc lamp. This method
can be used to determine if a textile is wet
light-sensitive. This standard supersedes MS 308 : Part 42 : 1980. |
|
| Price Code : B | |
| MS ISO 105-B05 : 2002 | |
| Textiles - Tests for colour fastness - Part B05 : Detection and assessment of photochromism | |
| This Malaysian Standard specifies a method intended for detecting and assessing change in colour, after brief exposure to light, of coloured textiles which change in colour on exposure to light but which virtually return to their original shade when stored in the dark. This standard supersedes MS 308 : Part 40 : 1980. | |
| Price Code : A | |
| MS ISO 105-B06 :2003 | |
| Textiles – Tests for colour fastness – Part B06 : Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test | |
| This part of MS ISO 105 specifies a method for determining the colour fastness and ageing properties of all kinds and forms of dyed and printed textiles and/or other organic substrates under the action of an artificial light source representative of natural daylight (D65), and under the simultaneous action of heat. Of the four different sets of exposure conditions specified, three use D65, and the fourth a somewhat lower cut-off wavelength. The test method gives special consideration to the light and heat conditions that occur in the interior of a motor vehicle. The four different sets of conditions specified are known to give similar but not necessarily identical results. | |
| Price RM30 | |
| MS ISO 105-B08 : 2003 | |
| Textiles
– Tests for color fastness – Part B08: Quality
control of blue wool reference materials 1 to 7 |
|
| This part of
MS ISO 105 describes a method for carrying out quality
control of production batches of the blue wool reference
materials 1 to 7 which are to be used in the appropriate
parts of MS ISO 105-B series of test methods for colour
fastness to light. |
|
| Price RM20 | |
| MS ISO 105-C01 : 1996 | |
| Textile - Tests for colour fastness:Part C01:Colour fastness to washing : Test 1. | |
| This part of
the Malaysian Standard specifies Test No. 1 of a series
of five washing test that have been established to
investigate the fastness to washing of coloured textiles
and which between them cover the range of washing
procedures from mild to severe. This standard shall
supersede MS 308 : Part 12 : 1975. |
|
| Price Code : A. | |
| MS ISO 105-C02 : 1996 | |
| Textile - Tests for colour fastness : Part C02 : Colour fastness to washing : Test 2. | |
| This part of
the Malaysian Standard specifies Test No. 2 of a series
of five washing test that have been established to
investigate the fastness to washing of coloured textiles
and which between them cover the range of washing
procedures from mild to severe. This standard shall
supersede MS 308 : Part 13 : 1975. |
|
| Price Code : A. | |
| MS ISO 105-C03 : 1996 | |
| Textile - Tests for colour fastness : Part C03 : Colour fastness to washing : Test 3. | |
| This part of
the Malaysian Standard specifies Test No. 3 of a series
of five washing test that have been established to
investigate the fastness to washing of coloured textiles
and which between them cover the range of washing
procedures from mild to severe. This standard shall
supersede MS 308 Part 14 : 1975. |
|
| Price Code : A. | |
| MS ISO 105-C04 : 1996 | |
| Textile - Tests for colour fastness : Part C04 : Colour fastness to washing : Test 4. | |
| This part of
the Malaysian Standard specifies Test No. 4 of a series
of five washing test that have been established to
investigate the fastness to washing of coloured textiles
and which between them cover the range of washing
procedures from mild to severe. This standard shall
supersede MS 308 : Part 15 : 1975. |
|
| Price Code : A. | |
| MS ISO 105-C05 : 1996 | |
| Textile - Tests for colour fastness : Part C05 : Colour fastness to washing : Test 5. | |
| This part of
the Malaysian Standard specifies Test No. 5 of a series
of five washing test that have been established to
investigate the fastness to washing of coloured textiles
and which between them cover the range of washing
procedures from mild to severe. |
|
| Price Code : A | |
| MS ISO 105-C06 : 2003 | |
| Textiles – Tests for colour fastness
– Part C06 : Colour fastness to domestic and
commercial laundering |
|
| This part of MS ISO 105 specifies methods
intended for determining the resistance of the colour of
textiles of all kinds and in all forms to domestic or
commercial laundering procedures used for normal
household articles. Industrial and hospital articles may
be more severe in some respects. |
|
| Price RM20 | |
| MS ISO 105-C07 : 2003 | |
| Textiles – Tests for colour fastness
– Part C07: Colour fastness to wet scrubbing of
pigment printed textiles |
|
| This part of MS ISO 105 describes a method for
determining the colour fastness to wet scrubbing of
pigment dyed or pigment printed textiles of all kinds.
The test is not applicable to loose fibres. |
|
| Price RM10 | |
| MS ISO 105-C08 : 2003 | |
| Textiles – Tests for colour fastness
– Part C08: Colour fastness to domestic and
commercial laundering using a non-phosphate detergent
incorporating a low temperature bleach activator |
|
| This part of MS ISO 105 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household articles using a reference detergent incorporating a low temperature bleach activator. | |
| Price RM20 | |
| MS ISO 105-C09 : 2003 | |
| Textiles – Tests for colour fastness
– Part C09: Colour fastness to domestic and
commercial laundering – Oxidative bleach response
using a non-phosphate reference detergent incorporating
as low temperature bleach activator |
|
| This Malaysian Standard specifies a method for
the determination of the resistance of the colour
fastness to domestic and commercial laundering –
Oxidative bleach response using a non-phosphate reference
detergent incorporating a low temperature bleach
activator. |
|
| Price RM20 | |
| MS ISO 105-D01 : 2002 | |
| Textiles - Tests for colour fastness - Part D01 : Colour fastness to dry cleaning | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all forms to dry cleaning. This method is not suitable for the evaluation of the durability of textile finishes, nor is it intended for use in evaluating the resistance of colours to spot and stain removal procedures used by the dry-cleaner. This standard supersedes MS 308 : Part 38 : 1980. | |
| Price Code : A | |
| MS ISO 105-D02 : 2001 | |
| Textiles - Tests for colour fastness - Part D02 : Colour fastness to rubbing: Organic solvents | |
| This
standard specifies a method for determining the
resistance of the colour of textiles of all kinds and in
all forms, except loose fibre, to the combined action of
rubbing and of organic solvents used in spot-cleaning,
i.e. localized "spotting" carried out by hand.
This standard supersedes MS 308 : Part 6 : 1976. |
|
| Price Code : A | |
| MS ISO 105-E01 : 2001 | |
| Textiles - Tests for colour fastness : Part E01 : Colour fastness to water | |
| This
standard specifies a method for determining the
resistance of the colour of textiles of all kinds and in
all forms to immersion in water. This standard supersedes
MS 308 : Part 9 : 1975. |
|
| Price Code : A | |
| MS ISO 105-E02 : 2002 | |
| Textiles - Tests for colour fastness - Part E02 : Colour fastness to sea water | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to immersion in sea water. This standard supersedes MS 308 : Part 29 : 1977. | |
| Price Code : A | |
| MS ISO 105-E04 : 1996 | |
| Textile - Tests for colour fastness : Part E04 : Colour fastness to perspiration. | |
| This part of
the Malaysian Standard specifies a method for determining
the resistance of the colour of textiles of all kinds and
in all forms to the action of human perspiration. The
change of colour of each specimen and the staining of the
adjacent fabrics are assessed by comparison within the
grey scales. This standard shall supersede MS 308 : Part
8 : 1975. |
|
| Price Code : A | |
| MS ISO 105-E05 : 2003 | |
| Textiles – Tests for colour fastness
– Part E05 : Colour fastness to spotting: Acid |
|
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of textiles of
all kinds and in all forms to the action of dilute
solutions of organic and mineral acids. |
|
| Price RM10 | |
| MS ISO 105-E06 : 2003 | |
| Textiles – Tests for colour fastness – Part E06: Colour fastness to spotting: Alkali | |
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of all kinds and
in all forms to the action of dilute alkaline solutions. |
|
| Price RM10 | |
| MS ISO 105-E09 : 2003 | |
| Textiles – Tests for colour fastness
– Part E09: Colour fastness to potting |
|
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of textiles of
all kinds and in all forms to the action of boiling
water. It is mainly applicable to wool and textiles
containing wool. |
|
| Price RM10 | |
| MS ISO 105-E10 : 2003 | |
| Textiles – Tests for colour fastness
– Part E10: Colour fastness to decatizing |
|
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of textiles to
the action of steam, as employed in the decatizing of
wool fabrics. Two tests, mild and severe, are given. |
|
| Price RM10 | |
| MS ISO 105-E07 : 2002 | |
| Textiles - Tests for colour fastness - Part E07 : Colour fastness to spotting: Water | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water. This standard supersedes MS 308 : Part 30 : 1977. | |
| Price Code : A | |
| MS ISO 105-E08 : 2001 | |
| Textiles - Tests for colour fastness : Part E08 : Colour fastness to hot water | |
| This
standard specifies a method for determining the
resistance of the colour of textiles of all kinds and in
all forms to the action of hot water. The method is
mainly applicable to wool and textiles containing wool.
This standard supersedes MS 308 : Part 10 : 1975. |
|
| Price Code : A | |
| MS ISO 105-E11 : 2002 | |
| Textiles - Tests for colour fastness - Part E11 : Colour fastness to steaming | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of steam under atmospheric pressure. This standard supersedes MS 308 : Part 35 : 1980. | |
| Price Code : A | |
| MS ISO 105-E12 : 2002 | |
| Textiles - Tests for colour fastness - Part E12 : Colour fastness to milling : Alkaline milling | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of wool and part-wool textiles to the action of soap and sodium carbonate solutions used in alkaline milling. This standard supersedes MS 308 : Part 32 : 1980. | |
| Price Code : A | |
| MS ISO 105-E13 : 2002 | |
| Textiles - Tests for colour fastness - Part E13 : Colour fastness to acid-felting : Severe | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all forms to the action of acids, as used under severe conditions in the acid-felting process. This standard supersedes MS 308 : Part 33 : 1980. | |
| Price Code : A | |
| MS ISO 105-E14 : 2002 | |
| Textiles - Tests for colour fastness - Part E14 : Colour fastness to acid-felting : Mild | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles to the action of dilute and hot mineral acids, as used under mild felting conditions in the hat-making and felt industries. This standard supersedes MS 308 : Part 34 : 1980 | |
| Price Code : A | |
| MS ISO 105-F : 2002 | |
| Textiles - Tests for colour fastness - Part F: Standard adjacent fabrics | |
| This Malaysian Standard is intended to establish an undyed pure wool adjacent fabric which may be used for the assessment of staining in colour fastness test procedures. The standard wool adjacent fabric exhibits standardized staining properties. | |
| Price Code : C | |
| MS ISO 105-F01 : 2003 | |
| Textiles – Tests for colour fastness
– Part F01: Specification for wool adjacent fabric |
|
| This part of MS ISO 105 specifies an undyed wool
adjacent fabric which may be used for the assessment of
staining in colour fastness tests. The staining
properties of the wool adjacent fabric under test are
assessed against a wool reference adjacent fabric, using
two wool dyed reference fabrics and one cotton dyed
reference fabric, all of which are available from a
specified source. |
|
| Price RM10 | |
| MS ISO 105-F03 : 2003 | |
| Textiles – Tests for colour fastness
– Part F03: Specification for polyamide adjacent
fabric |
|
| This part of MS ISO 105 specifies an undyed
polyamide adjacent fabric which may be used for the
assessment of staining in colour fastness tests. The
staining properties of the polyamide adjacent fabric
under test are assessed against a polyamide reference a
polyamide reference adjacent fabric, using a polyamide
dyed reference fabric, both of which are available from a
specified source. |
|
| Price RM10 | |
| MS ISO 105-F04 : 2003 | |
| Textiles – Tests for colour fastness
– Part F04: Specification for polyester adjacent
fabric |
|
| This part of MS ISO 105 specifies an undyed
polyester adjacent fabric which may be used for the
assessment of staining in colour fastness tests. The
staining properties of the polyester adjacent fabric
under test are assessed against a polyester reference
adjacent fabric, using a polyester dyed reference fabric,
both of which are available from a specified source. |
|
| Price RM10 | |
| MS ISO 105-F05 : 2003 | |
| Textiles – Tests for colour fastness
– Part F05: Specification for acrylic adjacent
fabric |
|
| This part of MS ISO 105 specifies an undyed
acrylic adjacent fabric which may be used for the
assessment of staining in colour fastness tests. The
staining properties of the acrylic adjacent fabric under
test are assessed against an acrylic reference adjacent
fabric, using an acrylic adjacent dyed reference fabric,
both of which are available from a specified source. |
|
| Price RM10 | |
| MS ISO 105-F06 : 2003 | |
| Textile – Tests for colour fastness
– Part F06: Specification for silk adjacent fabric |
|
| This part of MS ISO 105 specifies an undyed silk
adjacent fabric which may be used for the assessment of
staining in colour fastness tests. The staining
properties of the silk adjacent fabric under test are
assessed against an acrylic reference adjacent fabric,
using an acrylic adjacent dyed reference fabric, both of
which are available from a specified source. |
|
| Price RM10 | |
| MS ISO 105-F07 : 2003 | |
| Textiles – Tests for colour fastness
– Part F07: Specification for secondary acetate
adjacent fabric |
|
| This part of MS ISO 105 specifies an undyed silk
adjacent fabric which may be used for the assessment of
staining in colour fastness tests. The staining
properties of the silk adjacent fabric under test are
assessed against an acrylic reference adjacent fabric,
using an acrylic adjacent dyed reference fabric, both of
which are available from a specified source. |
|
| Price RM10 | |
| MS ISO 105-F10 : 2002 | |
| Textiles - Tests for colour fastness - Part F10: Specification for adjacent fabrics: Multifibre | |
| This Malaysian Standard establishes general requirements for undyed multifibre adjacent fabrics which may be used for the assessment of staining in colour fastness test procedures. The multifibre adjacent fabrics exhibit standardized staining properties. | |
| Price Code : A | |
| MS ISO 105-G01 : 2003 | |
| Textiles
– Tests for colour fastness – Part G01: Colour
fastness to nitrogen oxides |
|
| This part of
MS ISO 105 specifies two methods for determining the
resistance of the colour of textiles of all kinds and in
all forms to the action of nitrogen oxides produced
during combustion of gas, coal, oil, etc., and when air
is passed over heated filaments. |
|
| Price RM20 | |
| MS ISO 105-G02 : 2003 | |
| Textiles
– Tests for colour fastness – Part G02: Colour
fastness to burnt gas fumes |
|
| This part of
MS ISO 105 specifies two methods for determining the
resistance of the colour of textiles of all kinds and in
all forms to the action of nitrogen oxides produced
during combustion of gas, coal, oil, etc., and when air
is passed over heated filaments. |
|
| Price RM10 | |
| MS ISO 105-G03 : 2003 | |
| Textiles
– Tests for colour fastness – Part G03 : Colour
fastness to ozone in atmosphere |
|
| This part of
MS ISO 105 specifies a method for determining the
resistance of the colour of textiles of all kinds and in
all forms to the action of ozone in the atmosphere, both
at ambient room temperatures with relative humidities not
exceeding 65 % and at elevated temperatures with relative
humidities above 80 %. |
|
| Price RM20 | |
| MS ISO 105-G04 : 2003 | |
| Textiles
– Tests for colour fastness – Part G04: Colour
fastness to oxides of nitrogen in the atmosphere at high
humidities |
|
| This part of
MS ISO 105 specifies a method for determining the
resistance of the colour of textiles to the action of
oxides of nitrogen in the atmosphere at elevated
temperatures and high relative humidities. |
|
| Price RM10 | |
| MS ISO 105-J01 : 2003 | |
| Textiles
–Tests for colour fastness – Part J01: General
principles for measurement of surface colour |
|
| This part of
MS ISO 105 is designed as a reference document to support
the proper measurement of the colour of specimens by
instrumental means as required in many parts of MS ISO
105. The document describes general concepts and problems
associated with reflectance colour measurement. |
|
| Price RM20 | |
| MS ISO 105-J02 : 2003 | |
| Textiles
– Tests for colour fastness – Part J02 :
Instrumental assessment of relative whiteness |
|
| This part of MS ISO 105 specifies a method intended for quantifying the whiteness and tint of textiles, including fluorescent materials. | |
| Price RM20 | |
| MS ISO 105-J03 : 2003 | |
| Textiles
– Tests for colour fastness – Part J03 :
Calculation of colour difference |
|
| This part of
MS ISO 105 provides a method of calculating the colour
difference between two specimens of the same material,
measured under the same conditions, such that the
numerical value D Ecmc
(l:c) for the total colour difference
quantifies the extent to which the two specimens do not
match. It permits the specification of a maximum value
(tolerance) which depends only on the closeness of match
required for a given end-use and not on the colour
involved, nor on the nature of the colour difference. The
method also provides a means for establishing the ratio
of differences in lightness to chroma and to hue. |
|
| Price RM20 | |
| MS ISO 105-N01 : 2002 | |
| Textiles - Tests for colour fastness - Part N01 : Colour fastness to bleaching : Hypochlorite | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of bleaching baths containing sodium or lithium hypochlorite in concentrations normally used in commercial bleaching. It is applicable mainly to natural and regenerated cellulose materials. This standard supersedes MS 308 : Part 20 : 1975. | |
| Price Code : A | |
| MS ISO 105-N02 : 2002 | |
| Textiles - Tests for colour fastness - Part N02 : Colour fastness to bleaching : Peroxide | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds, and in all forms, to the action of bleaching baths containing peroxide in concentrations commonly used in textile processing. This standard supersedes MS 308 : Part 31 : 1980. | |
| Price Code : A | |
| MS ISO 105-N03 : 2002 | |
| Textiles - Tests for colour fastness - Part N03 : Colour fastness to bleaching: Sodium chlorite (mild) | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles composed of natural and regenerated cellulose, and syntehtic fibres, to the action of mild bleaching with sodium chlorite as employed in textile processing. This standard supersedes MS 308 : Part 21 : 1977. | |
| Price Code : A | |
| MS ISO 105-N04 : 2002 | |
| Textiles - Tests for colour fastness - Part N04 : Colour fastness to bleaching : Sodium chlorite (severe) | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of natural cellulose textiles to the action of severe bleaching with sodium chlorite as ordinarily employed in textile processing. This standard supersedes MS 308 : Part 22 : 1977. | |
| Price Code : A | |
| MS ISO 105-N05 : 2002 | |
| Textiles - Tests for colour fastness - Part N05 : Colour fastness to stoving | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of sulfur dioxide as used for bleaching animal fibres. This standard supersedes MS 308 : Part 28 : 1977. | |
| Price Code : A | |
| MS ISO 105-P01 : 2002 | |
| Textiles - Tests for colour fastness - Part P01 : Colour fastness to dry heat (excluding pressing) | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of dry heat, excluding pressing, as it is used to stabilize the size and form of textiles. Three tests differing in temperature are provided; one or more of them may be used, depending on the requirements and the stability of the fibres. This standard supersedes MS 308 : Part 23 : 1980. | |
| Price Code : A | |
| MS ISO 105-P02 : 2002 | |
| Textiles - Tests for colour fastness - Part P02 : Colour fastness to pleating : Steam pleating. | |
| This Malaysian Standard specifies a method intended for determining the resistance of the colour of textiles of all kinds and in all forms to the action of steam-pleating processes. The materials are not pleated during the test, and it is emphasized that the test is not intended for assessing the quality of the pleating process. Three tests differing in severity are provided; one or more of them may be used depending on the requirements. This standard supersedes MS 308 : Part 43 : 1980. | |
| Price Code : A | |
| MS ISO 105-S01 : 2002 | |
| Textiles - Tests for colour fastness - Part S01 : Colour fastness to vulcanization : Hot air | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of a typical rubber compound, such as may be used in the proofing industry, and to its decomposition products, during vulcanization in hot air. This standard supersedes MS 308 : Part 36 : 1980. | |
| Price Code : A | |
| MS ISO 105-S02 : 2002 | |
| Textiles - Tests for colour fastness - Part S02 : Colour fastness to vulcanization : Sulfur monochloride | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all forms to the action of sulfur monochloride under the conditions usually occurring during the cold vulcanizing of rubber. This standard supersedes MS 308 : Part 37 : 1980. | |
| Price Code : A | |
| MS ISO 105-S03 : 2002 | |
| Textiles - Tests for colour fastness - Part S03 : Colour fastness to vulcanization : Open steam | |
| This
Malaysian Standard specifies a method for determining the
resistance of the colour of textiles of all kinds and in
all forms to the action of a typical rubber compound such
as may be used in the proofing industry, and to its
decomposition products, during vulcanization in open
steam, either a) under conditions that prevent live steam from coming into contact with the specimen to be tested (method A) or b) under conditions that allow live steam to infiltrate into the adjacent fabric to be tested (method B). This standard supersedes MS 308 : Part 25 : 1980. |
|
| Price Code : A | |
| MS ISO 105-X01 : 2003 | |
| Textiles – Tests for colour fastness
– Part X01: Colour fastness to carbonizing:
Aluminium chloride |
|
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of textiles in
all forms to the manufacturing operation designed to
remove vegetable impurities by a treatment with aluminium
chloride at high temperatures. The method is mainly
applicable to wool and textiles containing wool,
particulary those containing also acetate or polyamide
fibres. |
|
| Price RM10 | |
| MS ISO 105-X02 : 2003 | |
| Textiles – Tests for colour fastness
– Part X02 : Colour fastness to carbonizing:
Sulfuric acid |
|
| This part of ISO 105 specifies a method for
determining the resistance of the colour of textiles in
all forms to the manufacturing operation designed to
remove vegetable impurities by treatment with sulfuric
acid at high temperatures. The method is mainly
applicable to wool and textiles containing wool. |
|
| Price RM10 | |
| MS ISO 105-X04 : 2002 | |
| Textiles - Tests for colour fastness - Part X04 : Colour fastness to mercerizing | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles to the action of concentrated solutions of sodium hydroxide used in mercerizing. The method is mainly applicable to cotton and to mixtures containing cotton. This standard supersedes MS 308 : Part 27 : 1980. | |
| Price Code : A | |
| MS ISO 105-X05 : 2002 | |
| Textiles - Tests for colour fastness - Part X05 : Colour fastness to organic solvents | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to organic solvents. If dry cleaning is involved, use the method specified in MS ISO 105-D01:1993, Textiles - Tests for colour fastness - Part D01 : Colour fastness to dry cleaning. This standard supersedes MS 308 : Part 17 : 1975. | |
| Price Code : A | |
| MS ISO 105-X06 : 2002 | |
| Textiles - Tests for colour fastness - Part X06 : Colour fastness to soda boiling | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of boiling dilute sodium carbonate solution. The method is mainly applicable to natural and regenerated cellulose materials. Two tests are provided: one with and the other without the addition of a reduction inhibitor. This standard supersedes MS 308 : Part 11 : 1975. | |
| Price Code : A | |
| MS ISO 105-X07 : 2003 | |
| Textiles – Tests for colour fastness
– Part X07: Colour fastness to cross-dyeing: Wool |
|
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of textiles to
the action of processes used for dyeing wool. |
|
| Price RM10 | |
| MS ISO 105-X08 : 2003 | |
| Textiles – Tests for colour fastness
– Part X08: Colour fastness to degumming |
|
| This part of MS ISO 105 specifies a method for
determining the resistance of the colour of textiles of
all kinds, except loose fibre, to the action of soap
solutions such as those used in degumming raw silk. |
|
| Price RM10 | |
| MS ISO 105-X09 : 2002 | |
| Textiles - Tests for colour fastness - Part X09 : Colour fastness to formaldehyde | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of formaldehyde vapour, as may be encountered in storehouses where fabrics are stored with materials which have undergone a crease-resistant treatment. This method is not suitable for assessing changes in colour which may occur during crease-resist finishing with urea-formaldehyde products, or in subsequent treatment of the dyeing with solutions of formaldehyde. This standard supersedes MS 308 : Part 24 : 1977. | |
| Price Code : A | |
| MS ISO 105-X10 : 2002 | |
| Textiles - Tests for colour fastness - Part X10 : Assessment of migration of textile colours into polyvinyl chloride coatings | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles fabrics to migration into polyvinyl chloride (PVC) which contains plasticizer. This standard supersedes MS 308 : Part 39 : 1980. | |
| Price Code : A | |
| MS ISO 105-X11 : 2002 | |
| Textiles - Tests for colour fastness - Part X11 : Colour fastness to hot pressing | |
| This Malaysian Standard specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to ironing and to processing on hot cylinders. Tests are given for hot pressing when the textile is dry, when it is damp and when it is wet. The end-use of the textile usually determines which test should be made. This standard supersedes MS 308 : Part 19 : 1975. | |
| Price Code : A | |
| MS ISO 105-X12 : 2001 | |
| Textiles - Tests for colour fastness - Part X12 : Colour fastness to rubbing | |
| This
standard specifies a method for determining the
resistance of the colour of textiles of all kinds,
including textile floor coverings and other pile fabrics,
to rubbing off and staining other materials. The method
is applicable to a laid textile floor covering or to a
detached sample or yarns. This standard supersedes MS 308
: Part 6 : 1976. |
|
| Price Code : A | |
| MS ISO 105-X13 : 2003 | |
| Textiles – Tests
for colour fastness – Part X13: Colour fastness of
wool dyes to processes using chemical means for creasing,
pleating and setting |
|
| This part of MS ISO
specifies a method for determining the resistance of the
colour of wool textiles of all kinds to processes using
chemical means in conjunction with steam for creasing,
pleating and setting purposes. |
|
| Price RM10 | |
| MS ISO 105-X14 : 2002 | |
| Textiles - Tests for colour fastness - Part X14 : Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate | |
| This
Malaysian Standard specifies a method for determining the
resistance of the colour of wool in all forms to acid
chlorination using sodium dichloroisocyanurate1). This
simulates the manufacturing operation in which a liquid containing or liberating active chlorine under mildly acid conditions is used for imparting shrink-resistant properties to wool in textiles. This standard supersedes MS 308 : Part 26 : 1977. |
|
| Price Code : A | |
| MS ISO 105-X16 : 2003 | |
| Textiles – Tests for colour fastness
– Part X16: Colour fastness to rubbing – Small
areas. |
|
| This Malaysian Standard is identical with ISO
105-X16:2001. This Malaysian Standard specifies a method
for the determination of colour fastness to rubbing of
small areas. |
|
| Price RM20 | |
| MS ISO 105-Z01 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z01: Colour fastness to metals in the
dye-bath: Chromium salts |
|
| This part of MS ISO 105 specifies a method for
determining the effect, on the colour of dye to provide a
milder test suitable for assessing the effect of chromium
salts in such concentrations as might be found when
shading. |
|
| Price RM10 | |
| MS ISO 105-Z02 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z02: Colour fastness to metals in the
dye-bath: Iron and copper |
|
| This part of MS ISO 105 specifies a method for
determining the effect, on the colour of dye, of dyeing
in the presence of metals (iron and cooper or their
salts) either used in the construction of dyeing
machinery or resulting from water and steam used in
dyeing. |
|
| Price RM10 | |
| MS ISO 105-Z03 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z03: Inter-compatibility of basic dyes for
acrylic fibres |
|
| This Malaysian Standard is identical with ISO
105-Z03:1996. This Malaysian Standard specifies a method
for the determination of intercompatibility of basic dyes
for acrylic fibres. |
|
| Price RM10 | |
| MS ISO 105-Z04 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z04 : Dispersibility of disperse dyes |
|
| This part of MS ISO 105 describes a method for
determining the dispersibility, as evaluated by filtering
time and filter residue, of disperse dyes. |
|
| Price RM10 | |
| MS ISO 105-Z05 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z05: Determination of the dusting behaviour
of dyes |
|
| This part of MS ISO 105 specifies a method for
determining of the dusting behaviour of dyes. |
|
| Price RM20 | |
| MS ISO 105-Z06 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z06: Evaluation of dye and pigment migration |
|
| This part of MS ISO 105 describes a method for
assessing the migration propensity of a pad liquor system
containing dyes or pigments, subsequently referred to as
colorants, and which may also contain different types and
amounts of migration inhibitors. The degree of migration
is obtained by visual examination or by reflectance
measurements |
|
| Price RM10 | |
| MS ISO 105-Z07 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z07: Determination of application solubility
and solution stability of water-soluble dyes |
|
| This part of MS ISO 105 describes a method for
the determining of the application solubility of
water-soluble dyes inthe range 40 ° C to 90 ° C and of
their solution stability. The method is not intended to
measure absolute solubility. |
|
| Price RM10 | |
| MS ISO 105-Z08 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z08: Determination of solubility and solution
stability of reactive dyes in the presence of
electrolytes. |
|
| This part of MS ISO 105 describes a method for the determination of the solubility and the solution stability of reactive dyes for use in batchwise and continuous dyeing processes in the presence of electrolytes. | |
| Price RM20 | |
| MS ISO 105-Z09 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z09: Determination of cold water solubility
of water-soluble dyes |
|
| This part of MS ISO 105 describes a method for
the determination of solubility of water-soluble dyes at
25 ° C in aqueous solution without previous heating. The
method is not intended to measure absolute solubility. |
|
| Price RM10 | |
| MS ISO 105-Z10 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z10: Determination of relative colour
strength of dyes in solution |
|
| This method is intended for the determination of
the colour strength of a dye in relation to that of a
reference dye by means of spectrophotometric absorption
measurements on solutions of dyes. |
|
| Price RM20 | |
| MS ISO 105-Z11 : 2003 | |
| Textiles – Tests for colour fastness
– Part Z11 : Evaluation of speckiness of colorant
dispersions |
|
| This Malaysian Standard describes a test method to determine speckiness primarily of disperse dye, vat dye and pigment dispersions. | |
| Price RM10 | |
| MS ISO 139 : 1995 | |
| Textile - Standard atmospheres for conditioning and testing. | |
| This
Malaysian Standard defines the characteristics and use of
standard atmospheres for conditioning and for determining
the physical and mechanical properties of textiles. |
|
| Price Code : A | |
| MS ISO 3759 : 1995 | |
| Textile - Preparation, marking and measuring of fabrics specimens and garments in tests for determination of dimensional change. | |
| This
Malaysian Standard specifies methods for the preparation,
marking and measuring of fabrics specimens (except
textile floor coverings) and garments for use in tests
for determining dimensional change (for example
dimensional change on washing, dry cleaning, soaking in
water, or steaming). |
|
| Price Code : B | |
| MS ISO 3932 : 2003 | |
| Textiles
– Woven fabrics – Measurement of width of
pieces |
|
| This
Malaysian Standard specifies two methods for the
determination of the length of pieces (of any length) of
woven fabrics that are in the state of relaxation
obtained by exposure (free from applied tension) to the
standard atmosphere for testing. This standard replaces
MS 55: Part 3:1972. |
|
| Price
RM10 |
|
| MS ISO 3933 : 2003 | |
| Textiles
– Woven fabrics – Measurement of length of
pieces |
|
| This
Malaysian Standard specifies two methods for the
determination of the length of pieces (of any length) of
woven fabrics that are in the state of relaxation
obtained by exposure (free from applied tension) to the
standard atmosphere for testing. This standard replaces
MS 55: Part 2:1972. |
|
| Price RM10 | |
| MS ISO 5077 : 1995 | |
| Textile - Determination of dimensional change in washing and drying. | |
| This Malaysian Standard specifies a method for determination of the dimensional change of fabrics, garments or other textile articles when subjected to an appropriate combination of specified washing and drying procedures. | |
| Price Code : A | |
| MS ISO 5084 : 2003 | |
| Textiles
– Determination of thickness of textiles and textile
products |
|
| This
Malaysian Standard specifies a method for the
determination of the thickness of textiles and textile
products when under a specified pressure. It is not
applicable to textile floor coverings, nonwovens,
geotextiles and coated fabrics for which specific
Malaysian Standards exist. This standard replaces MS 55:
Part 4:1972. |
|
| Price RM20 | |
| MS ISO 6330 : 1995 | |
| Textile - Domestic washing and drying procedures for textile testing. | |
| This
Malaysian Standard specifies domestic washing and drying
procedures for textile testing. The procedures are
applicable to textile fabrics, garments or other textile
articles which are subjected to appropriate combinations
of domestic washing and drying procedures. |
|
| Price Code : B | |
| MS ISO 10047 : 1995 | |
| Textile - Determination of surface burning of fabrics. | |
| This
Malaysian Standard specifies methods for the measurement
of surface burning time of textile fabrics which have a
raised fibre surface i.e. napped, pile, tufted, flocked
or similar surface. |
|
| Price Code : B | |
Textiles |
|
| MS 496 : 2003 | |
| Determination of bending strength and flexural rigidity of fabrics. | |
| This standard describes a method for determination of the bending length and flexural rigidity of textile fabrics and certain non wovens by means of a fixed-angle flexometer. The method is not applicable to fabrics that curl or twist badly when cut into small pieces, nor to fabrics that show a noticeable time effect when allowed to bend under their own mass. NOTES: 1. The use of this method for non-wovens should be agreed between the interested parties. | |
| Price Code : A | |
| MS ISO 105-A04 : 2003 | |
| Textiles – Tests for colour fastness – Part A04: Method for the instrumental assessment of the degree of staining of adjacent factor. | |
| This part of MS ISO 105 specifies an instrumental method for assessing the degree of staining of adjacent fabrics in any fastness test, an alternative to the visual method. | |
| Price Code : A | |
| MS ISO 105-A05 : 2003 | |
| Textiles – Tests for colour fastness – Part A05: Instrumental assessment of change in colour for determination of grey scale rating. | |
| This part of MS ISO 105 specifies an instrumental method for assessing the change in colour of a test specimen in comparison to an identical untreated reference, and the calculations undertaken to convert the instrumental measurements into a grey scale rating. This method is intended as an alternative to the many national methods for visual evaluation of the effect of a colour fastness test on any textile material. | |
| Price Code : A | |
| MS ISO 105-A06 : 2003 | |
| Textiles – Tests for colour fastness – Part A06: Instrumental determination of 1/1 standard depth of colour. | |
| This method is intended for determining 1/1 standard depth of a dyeing on any textile material by a colorimetric method as a permitted alternative to the visual method described in Clause 12 of MS ISO 105-A01. This method is applicable to 1/1 standard depth of colour only. | |
| Price Code : A | |
| MS ISO 105-A08 : 2003 | |
| Textiles – Tests for colour fastness – Part A08: Vocabulary used in colour measurement. | |
| This part of MS ISO 105 specifies the terms and definitions on colour measurements that are used throughout MS ISO 105. These definitions are intended to be used only within the context and scope of MS ISO 105. | |
| Price Code : B | |
| MS ISO 105-B06 : 2003 | |
| Textiles – Tests for colour fastness – Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test. | |
| This part of MS ISO 105 specifies a method for determining the colour fastness and ageing properties of all kinds and forms of dyed and printed textiles and/or other organic substrates under the action of an artificial light source representative of natural daylight (D65), and under the simultaneous action of heat. Of the four different sets of exposure conditions specified, three use D65, and the fourth a somewhat lower cut-off wavelength. The test method gives special consideration to the light and heat conditions that occur in the interior of a motor vehicle. The four different sets of conditions specified are known to give similar but not necessarily identical results. | |
| Price Code : B | |
| MS ISO 105-B08 : 2003 | |
| Textiles – Tests for color fastness – Part B08: Quality control of blue wool reference materials 1 to 7. | |
| This part of MS ISO 105 describes a method for carrying out quality control of production batches of the blue wool reference materials 1 to 7 which are to be used in the appropriate parts of MS ISO 105-B series of test methods for colour fastness to light. | |
| Price Code : A | |
| MS ISO 105-C06 : 2003 | |
| Textiles – Tests for colour fastness – Part C06: Colour fastness to domestic and commercial laundering. | |
| This part of MS ISO 105 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household articles. Industrial and hospital articles may be more severe in some respects. | |
| Price Code : A | |
| MS ISO 105-C07 : 2003 | |
| Textiles – Tests for colour fastness – Part C07: Colour fastness to wet scrubbing of pigment printed textiles | |
| This part of MS ISO 105 describes a method for determining the colour fastness to wet scrubbing of pigment dyed or pigment printed textiles of all kinds. The test is not applicable to loose fibres. | |
| Price Code : A | |
| MS ISO 105-C08 : 2003 | |
| Textiles – Tests for colour fastness – Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate detergent incorporating a low temperature bleach activator. | |
| This part of MS ISO 105 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household articles using a reference detergent incorporating a low temperature bleach activator. | |
| Price Code : B | |
| MS ISO 105-C09 : 2003 | |
| Textiles – Tests for colour fastness – Part C09: Colour fastness to domestic and commercial laundering – Oxidative bleach response using a non-phosphate reference detergent incorporating as low temperature bleach activator. | |
| This Malaysian Standard specifies a method for the determination of the resistance of the colour fastness to domestic and commercial laundering – Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator. | |
| Price Code : B | |
| MS ISO 105-E03 : 2003 | |
| Textiles – Tests for colour fastness – Part E03: Colour fastness to chlorinated water (swimming-pool water). | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in concentrations used to disinfect swimming-pool water (break-point chlorination). Three alternative test conditions are specified. The active chlorine concentrations of 50 mg/L and 100 mg/L are intended for swimwear. The active chlorine concentration of 20 mg/L is intended for accessories such as beach robes and towels. | |
| Price Code : A | |
| MS ISO 105-E05 : 2003 | |
| Textiles – Tests for colour fastness – Part E05: Colour fastness to spotting: Acid. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of dilute solutions of organic and mineral acids. | |
| Price Code : A | |
| MS ISO 105-E06 : 2003 | |
| Textiles – Tests for colour fastness – Part E06: Colour fastness to spotting: Alkali. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of all kinds and in all forms to the action of dilute alkaline solutions. | |
| Price Code : A | |
| MS ISO 105-E09 : 2003 | |
| Textiles – Tests for colour fastness – Part E09: Colour fastness to potting. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of boiling water. It is mainly applicable to wool and textiles containing wool. | |
| Price Code : A | |
| MS ISO 105-E10 : 2003 | |
| Textiles – Tests for colour fastness – Part E10: Colour fastness to decatizing. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles to the action of steam, as employed in the decatizing of wool fabrics. Two tests, mild and severe, are given. | |
| Price Code : A | |
| MS ISO 105-F01 : 2003 | |
| Textiles – Tests for colour fastness – Part F01: Specification for wool adjacent fabric. | |
| This part of MS ISO 105 specifies an undyed wool adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the wool adjacent fabric under test are assessed against a wool reference adjacent fabric, using two wool dyed reference fabrics and one cotton dyed reference fabric, all of which are available from a specified source. | |
| Price Code : A | |
| MS ISO 105-F03 : 2003 | |
| Textiles – Tests for colour fastness – Part F03: Specification for polyamide adjacent fabric. | |
| This part of MS ISO 105 specifies an undyed polyamide adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the polyamide adjacent fabric under test are assessed against a polyamide reference a polyamide reference adjacent fabric, using a polyamide dyed reference fabric, both of which are available from a specified source. | |
| Price Code : A | |
| MS ISO 105-F04 : 2003 | |
| Textiles – Tests for colour fastness – Part F04: Specification for polyester adjacent fabric. | |
| This part of MS ISO 105 specifies an undyed polyester adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the polyester adjacent fabric under test are assessed against a polyester reference adjacent fabric, using a polyester dyed reference fabric, both of which are available from a specified source. | |
| Price Code : A | |
| MS ISO 105-F05 : 2003 | |
| Textiles – Tests for colour fastness – Part F05: Specification for acrylic adjacent fabric. | |
| This part of MS ISO 105 specifies an undyed acrylic adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the acrylic adjacent fabric under test are assessed against an acrylic reference adjacent fabric, using an acrylic adjacent dyed reference fabric, both of which are available from a specified source. | |
| Price Code : A | |
| MS ISO 105-F06 : 2003 | |
| Textile – Tests for colour fastness – Part F06: Specification for silk adjacent fabric. | |
| This part of MS ISO 105 specifies an undyed silk adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the silk adjacent fabric under test are assessed against an acrylic reference adjacent fabric, using an acrylic adjacent dyed reference fabric, both of which are available from a specified source. | |
| Price Code : A | |
| MS ISO 105-F07 : 2003 | |
| Textiles – Tests for colour fastness – Part F07: Specification for secondary acetate adjacent fabric. | |
| This part of MS ISO 105 specifies an undyed silk adjacent fabric which may be used for the assessment of staining in colour fastness tests. The staining properties of the silk adjacent fabric under test are assessed against an acrylic reference adjacent fabric, using an acrylic adjacent dyed reference fabric, both of which are available from a specified source. | |
| Price Code : A | |
| MS ISO 105-G01 : 2003 | |
| Textiles – Tests for colour fastness – Part G01: Colour fastness to nitrogen oxides. | |
| This part of MS ISO 105 specifies two methods for determining the resistance of the colour of textiles of all kinds and in all forms to the action of nitrogen oxides produced during combustion of gas, coal, oil, etc., and when air is passed over heated filaments. | |
| Price Code : B | |
| MS ISO 105-G02 : 2003 | |
| Textiles – Tests for colour fastness – Part G02: Colour fastness to burnt gas fumes. | |
| This part of MS ISO 105 specifies two methods for determining the resistance of the colour of textiles of all kinds and in all forms to the action of nitrogen oxides produced during combustion of gas, coal, oil, etc., and when air is passed over heated filaments. | |
| Price Code : A | |
| MS ISO 105-G03 : 2003 | |
| Textiles – Tests for colour fastness – Part G03: Colour fastness to ozone in atmosphere. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of ozone in the atmosphere, both at ambient room temperatures with relative humidities not exceeding 65 % and at elevated temperatures with relative humidities above 80 %. | |
| Price Code : B | |
| MS ISO 105-G04 : 2003 | |
| Textiles – Tests for colour fastness – Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles to the action of oxides of nitrogen in the atmosphere at elevated temperatures and high relative humidities. | |
| Price Code : A | |
| MS ISO 105-J01 : 2003 | |
| Textiles –Tests for colour fastness – Part J01: General principles for measurement of surface colour. | |
| This part of MS ISO 105 is designed as a reference document to support the proper measurement of the colour of specimens by instrumental means as required in many parts of MS ISO 105. The document describes general concepts and problems associated with reflectance colour measurement. | |
| Price Code : B | |
| MS ISO 105-J02 : 2003 | |
| Textiles – Tests for colour fastness – Part J02: Instrumental assessment of relative whiteness. | |
| This part of MS ISO 105 specifies a method intended for quantifying the whiteness and tint of textiles, including fluorescent materials. | |
| Price Code : B | |
| MS ISO 105-J03 : 2003 | |
| Textiles – Tests for colour fastness – Part J03: Calculation of colour difference. | |
This part of
MS ISO 105 provides a method of calculating the colour
difference between two specimens of the same material,
measured under the same conditions, such that the
numerical value  for the total colour difference
quantifies the extent to which the two specimens do not
match. It permits the specification of a maximum value
(tolerance) which depends only on the closeness of match
required for a given end-use and not on the colour
involved, nor on the nature of the colour difference. The
method also provides a means for establishing the ratio
of differences in lightness to chroma and to hue. |
|
| Price Code : B | |
| MS ISO 105-X01 : 2003 | |
| Textiles – Tests for colour fastness – Part X01: Colour fastness to carbonizing: Aluminium chloride. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles in all forms to the manufacturing operation designed to remove vegetable impurities by a treatment with aluminium chloride at high temperatures. The method is mainly applicable to wool and textiles containing wool, particulary those containing also acetate or polyamide fibres. | |
| Price Code : A | |
| MS ISO 105-X02 : 2003 | |
| Textiles – Tests for colour fastness – Part X02: Colour fastness to carbonizing: Sulfuric acid. | |
| This part of ISO 105 specifies a method for determining the resistance of the colour of textiles in all forms to the manufacturing operation designed to remove vegetable impurities by treatment with sulfuric acid at high temperatures. The method is mainly applicable to wool and textiles containing wool. | |
| Price Code : A | |
| MS ISO 105-X07 : 2003 | |
| Textiles – Tests for colour fastness – Part X07: Colour fastness to cross-dyeing: Wool. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles to the action of processes used for dyeing wool. | |
| Price Code : A | |
| MS ISO 105-X08 : 2003 | |
| Textiles – Tests for colour fastness – Part X08: Colour fastness to degumming. | |
| This part of MS ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds, except loose fibre, to the action of soap solutions such as those used in degumming raw silk. | |
| Price Code : A | |
| MS ISO 105-X13 : 2003 | |
| Textiles – Tests for colour fastness – Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting. | |
| This part of MS ISO specifies a method for determining the resistance of the colour of wool textiles of all kinds to processes using chemical means in conjunction with steam for creasing, pleating and setting purposes. | |
| Price Code : B | |
| MS ISO 105-X16 : 2003 | |
| Textiles – Tests for colour fastness – Part X16: Colour fastness to rubbing – Small areas. | |
| This Malaysian Standard is identical with ISO 105-X16:2001. This Malaysian Standard specifies a method for the determination of colour fastness to rubbing of small areas. | |
| Price Code : A | |
| MS ISO 105-Z01 : 2003 | |
| Textiles – Tests for colour fastness – Part Z01: Colour fastness to metals in the dye-bath: Chromium salts. | |
| This part of MS ISO 105 specifies a method for determining the effect, on the colour of dye to provide a milder test suitable for assessing the effect of chromium salts in such concentrations as might be found when shading. | |
| Price Code : A | |
| MS ISO 105-Z02 : 2003 | |
| Textiles – Tests for colour fastness – Part Z02: Colour fastness to metals in the dye-bath: Iron and copper. | |
| This part of MS ISO 105 specifies a method for determining the effect, on the colour of dye, of dyeing in the presence of metals (iron and cooper or their salts) either used in the construction of dyeing machinery or resulting from water and steam used in dyeing. | |
| Price Code : A | |
| MS ISO 105-Z02 : 2003 | |
| Textiles – Tests for colour fastness – Part Z02: Colour fastness to metals in the dye-bath: Iron and copper. | |
| This part of MS ISO 105 specifies a method for determining the effect, on the colour of dye, of dyeing in the presence of metals (iron and cooper or their salts) either used in the construction of dyeing machinery or resulting from water and steam used in dyeing. | |
| Price Code : A | |
| MS ISO 105-Z03 : 2003 | |
| Textiles – Tests for colour fastness – Part Z03: Inter-compatibility of basic dyes for acrylic fibres. | |
| This Malaysian Standard is identical with ISO 105-Z03:1996. This Malaysian Standard specifies a method for the determination of intercompatibility of basic dyes for acrylic fibres. | |
| Price Code : A | |
| MS ISO 105-Z04 : 2003 | |
| Textiles – Tests for colour fastness – Part Z04: Dispersibility of disperse dyes. | |
| This part of MS ISO 105 describes a method for determining the dispersibility, as evaluated by filtering time and filter residue, of disperse dyes. | |
| Price Code : A | |
| MS ISO 105-Z05 : 2003 | |
| Textiles – Tests for colour fastness – Part Z05: Determination of the dusting behaviour of dyes. | |
| This part of MS ISO 105 specifies a method for determining of the dusting behaviour of dyes. | |
| Price Code : B | |
| MS ISO 105-Z06 : 2003 | |
| Textiles – Tests for colour fastness – Part Z06: Evaluation of dye and pigment migration. | |
| This part of MS ISO 105 describes a method for assessing the migration propensity of a pad liquor system containing dyes or pigments, subsequently referred to as colorants, and which may also contain different types and amounts of migration inhibitors. The degree of migration is obtained by visual examination or by reflectance measurements. | |
| Price Code : B | |
| MS ISO 105-Z07 : 2003 | |
| Textiles – Tests for colour fastness – Part Z07: Determination of application solubility and solution stability of water-soluble dyes. | |
| This part of MS ISO 105 describes a method for the determining of the application solubility of water-soluble dyes in the range 40 °C to 90 °C and of their solution stability. The method is not intended to measure absolute solubility. | |
| Price Code : A | |
| MS ISO 105-Z08 : 2003 | |
| Textiles – Tests for colour fastness – Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes. | |
| This part of MS ISO 105 describes a method for the determination of the solubility and the solution stability of reactive dyes for use in batchwise and continuous dyeing processes in the presence of electrolytes. | |
| Price Code : A | |
| MS ISO 105-Z09 : 2003 | |
| Textiles – Tests for colour fastness – Part Z09: Determination of cold water solubility of water-soluble dyes. | |
| This part of MS ISO 105 describes a method for the determination of solubility of water-soluble dyes at 25°C in aqueous solution without previous heating. The method is not intended to measure absolute solubility. | |
| Price Code : A | |
| MS ISO 105-Z10 : 2003 | |
| Textiles – Tests for colour fastness – Part Z10: Determination of relative colour strength of dyes in solution. | |
| This method is intended for the determination of the colour strength of a dye in relation to that of a reference dye by means of spectrophotometric absorption measurements on solutions of dyes. | |
| Price Code : B | |
| MS ISO 105-Z11 : 2003 | |
| Textiles – Tests for colour fastness – Part Z11: Evaluation of speckiness of colorant dispersions. | |
| This Malaysian Standard describes a test method to determine speckiness primarily of disperse dye, vat dye and pigment dispersions. | |
| Price Code : A | |
| MS ISO 3933 : 2003 | |
| Textiles – Woven fabrics – Measurement of length of pieces . | |
| This Malaysian Standard specifies two methods for the determination of the length of pieces (of any length) of woven fabrics that are in the state of relaxation obtained by exposure (free from applied tension) to the standard atmosphere for testing. This standard replaces MS 55: Part 2:1972. | |
| Price Code : A | |
| MS ISO 3932 : 2003 | |
| Textiles – Woven fabrics – Measurement of width of pieces. | |
| This Malaysian Standard specifies two methods for the determination of the length of pieces (of any length) of woven fabrics that are in the state of relaxation obtained by exposure (free from applied tension) to the standard atmosphere for testing. This standard replaces MS 55: Part 3:1972. | |
| Price Code : A | |
| MS ISO 5084 : 2003 | |
| Textiles – Determination of thickness of textiles and textile products. | |
| This Malaysian Standard specifies a method for the determination of the thickness of textiles and textile products when under a specified pressure. It is not applicable to textile floor coverings, nonwovens, geotextiles and coated fabrics for which specific Malaysian Standards exist. This standard replaces MS 55: Part 4:1972. | |
| Price Code : A | |
Yarns |
|
| MS 306 : 1975 (1995) | |
| Specification for netting yarns for fishing nets. | |
| Designation in the tex system. Prescribes method for designation using density or resultant linear density, expressed in tex. | |
| Price Code : A | |
| MS 334 : 1976 | |
| Method for determination of total starch or gum size and filling in cotton and viscose rayon yarn and fabric. | |
| Describes a procedure for the removal and determination of size and filling from cotton and viscose rayon yarn and cloth in which adhesive is starch, a chemically degraded starch, or some other type of water soluble carbohydrate. | |
| Price Code : B | |
| MS 347 : 1976 | |
| Method for detection and estimation of damage in cotton yarn and cordages due to micro-organisme. | |
| IIIustrations provided to show damages due to fungal attack and bacterial attack. Estimation of damage is derived from breaking strength. | |
| Price Code : B | |
| MS 349 : 1976 | |
| Methods for sampling of cotton yarn for determination of physical characteristics. | |
| Prescribes methods of sampling for determination of yarn count, skein-breaking load and twist. Specifies number of tests that should be made for each characteristic and criteria for ascertaining the conformity of yarn to specific requirements. | |
| Price Code : B | |
| MS 351 : 1976 | |
| Conversion table for replacing traditional yarn numbers by rounded numbers in the Tex System. | |
| Provides a range of recommended rounded linear densities in the Tex System to replace yarn numbers in six traditional numbering systems. | |
| Price Code : C | |
| MS 353 : 1976 | |
| Method for the determination of twist in yarns - Direct counting method. | |
| Specifies a method for determination of direct of twist in terms of turns per unit length and change in length on untwisting. | |
| Price Code : C | |
| MS 424 : 1976 | |
| Method for the determination of linear density of yarn from packages - Skein method. | |
| Method applies to all types of yarn in package form, with exception of textile glass continuous filament yarns, staple fibre yarns, and rovings. | |
| Price Code : C | |
| MS 440 : 1976 (1996) | |
| Methods for the determination of breaking load and knot breaking load of netting yarns for fishing nets. | |
| Test is performed using a suitable apparatus that indicates the load rupture for a length of yarn extended in the wet or dry state. | |
| Price Code : B | |
| MS 441 : 1976 | |
| Methods for the determination of breaking load and elongation at breaking load of yarns from packages - CRL, CRE and CRT testers. | |
| Breaking load and breaking elongation of single yarns, folded yarns and cabled yarns are described. | |
| Price Code : C | |
| MS 500 : 1977 | |
| Method for the determination of knot strength and loop strength of yarns from packages. | |
| Determination of breaking load and if required, the breaking extension of a (a) specimens of yarns in each of which a single overhand knot has been tied and (b) interlinked looped lengths of yarn. | |
| Price Code : C | |
| MS 502 : 1977 | |
| Specification for domestic sewing threads (cotton and spun polyester) | |
| Describes parameters for sewing threads sold in retail trade for domestic use (up to a unit length of 1000 m) | |
| Price Code : B | |
| MS 584 : 1979 (1996) | |
| Method for the determination of change in length of netting yarns after immersion in water. | |
| Principle of test involves change in length between two marks on a length of netting yarn after immersion in water. | |
| Price Code : A | |
| MS 690 : 1981 (1996) | |
| Method for the determination of elongation of netting yarns for fishing nets. | |
| Includes definitions of terms, sampling method, preparation of specimens and requirements for testing. | |
| Price Code : A | |
| MS 737 : 1981 (1996) | |
| Method for the designation of yarns. | |
| Describes two methods indicating composition of yarns single folded, cabled or multiple wound. Includes definitions of terms. | |
| Price Code : A | |
| MS 970 : 1985 | |
| Specification for industrial sewing threads. | |
| Applies to threads for use in high speed industrial sewing machines. Requirements include manufacture, colour fastness, length, pH value, thermal stability and breaking strength. | |
| Price Code : B | |
Textile fabrics |
|
| MS 55 : Part 10 : 1972 | |
| Method for the determination of tearing resistance of woven fabrics by the wing-rip method. | |
| Method is generally suitable for all woven fabrics except those which are very loosely constructed. | |
| Price Code : B | |
| MS 56 : 1972 | |
| Specification for cotton drills. | |
| Specifies requirements for only cotton drills, bleached or coloured. Standard does not state type of finish, general appearance, lustre and feel. Except for determination of water soluble matter, desizing loss and pH of aqueous extract by cold water extraction, methods of test are not given. | |
| Price Code : B | |
| MS 57 : 1972 | |
| Specification for cotton cellular shirting. | |
| Covers cotton cellular shirting, bleached or coloured. It does not specify type of finish, general appearance, lustre and feel, nor does it specify colours or their combinations. Determinations include water soluble matter, desizing loss, and pill for cold water extract. | |
| Price Code : B | |
| MS 58 : 1972 | |
| Specification for cotton bedsheets. | |
| Covers requirements for cotton bedsheets, coloured or bleached. Not specified are type of finish, general appearance, lustre and feel. Methods of test for other than determination of water soluble matter and desizing loss and pH of cold water extract, are referred to other Malaysian Standards or, where not available, to the appropriate British Standard. | |
| Price Code : B | |
| MS 59 : 1972 | |
| Specification for mixed-fibre shirting (polyester and cotton). | |
| Specifies requirements for mixed fibre shirting, bleached or coloured. Type of finish, general appearance, lustre or feel not specified. For methods of test procedures are given only for determination of water-soluble matter and desizing loss and pH value of cold water extract. | |
| Price Code : B | |
| MS 60 : 1972 | |
| Specification for cotton sheetings. | |
| Relates requirements for cotton sheetings, bleached or coloured. Types of finish, general appearance, lustre or feel not specified. | |
| Price Code : B | |
| MS 305 : 1975 | |
| Methods of test for resistance of fabrics to penetration by water (Hydrostatic head test). | |
| Method is primarily intended for water-repellent fabrics permeable to air. | |
| Price Code : A | |
| MS 307 : 1975 | |
| Method for determination of gelatine and oil size in viscose rayon and acetate yarn and fabric. | |
| Sizes based on drying oils, e.g. linseed oil, are excluded. | |
| Price Code : A | |
| MS 345 : 1976 | |
| Method for estimation of residual starch in cotton fabrics after desizing. | |
| Covers sampling, test specimens preparation, procedure and calculation. | |
| Price Code : A | |
| MS 358 : 1976 | |
| Method for the ballistic tear testing of the woven fabrics. | |
| Test is suitable for all types of woven fabrics in which a tear will proceed from an initial cut, substantially in a direction parallel to the warp threads or the weft threads as desired. | |
| Price Code : B | |
| MS 359 : 1976 | |
| Method for testing the resistance of fabrics to water absorption (Static immersion test). | |
| May be applied to any textile fabric for which knowledge of water absorption properties is required. | |
| Price Code : B | |
| MS 496 : 1977 | |
| Method for the determination for stiffness of cloth. | |
| Method determines the bending length and flexural rigidity of textile fabrics by means of a fixed-angle flexometer. | |
| Price Code : B | |
| MS 498 : 1977 | |
| Method for the determination of oils, fats and waxes in cotton. | |
| Method removes and determines oil, fat, wax, or fatty acid, in raw, scoured, and bleached cotton, and in cotton containing ingredients added as size or finish. | |
| Price Code : B | |
| MS 577 : 1979 | |
| Method for the determination of fluidity of cotton, rayons and cellulose acetate. | |
| Defines the standard cuprammonium solvent and the viscometer used in this determination, solution preparation, measurements and results calculations. | |
| Price Code : B | |
| MS 579 : 1979 | |
| Method for the determination of the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery. | |
| Measures the angle formed between the two limbs of a strip of fabric previously folded under prescribed conditions, at a specific time after removal of the creasing load. | |
| Price Code : A | |
| MS 691 : 1981 | |
| Specification for delustred regenerated cellulose. | |
| Prescribes requirements, sampling and test methods of delustred regenerated cellulose or delustred rayon intended for medical as well as domestic use. | |
| Price Code : A | |
| MS 692 : 1981 | |
| Specification for handicrafted batik - Bilingual. | |
| Includes definitions, requirements, sampling and test methods. Does not specify type of finish, general appearance, lustre and feel, colours and dimensions of borders and 'kepalas'. | |
| Price Code : B | |
| MS 736 : 1981 | |
| Specification for cotton mosquito netting, round mesh, bleached or dyed. | |
| Prescribes requirements such as constructional details, colour fastness, resistance to microbiological attack etc., methods of test and sampling general appearance, feel and shade of cloth. | |
| Price Code : A | |
| MS 1066 : 1987 | |
| Specification for cotton canvas; grey, scored, dyed or waterproofed. | |
| Specifies manufacturing details and other requirements of four types of cotton canvas; grey, scoured, dyed or waterproofed. | |
| Price Code : A | |
| MS 1132 : 1989 | |
| Method of determination for dimensional changes of elastic fabrics during washing and drying. | |
| Gives a method for the determination of the dimensional changes of elastic fabrics during washing and drying and is applicable to all elastic fabrics. | |
| Price Code : A | |
| MS 1133 : 1989 | |
| Method for the determination of dimensional change on washing of certain fabrics. | |
| Describes a method of test for the determination of the dimensional change on washing of fabrics, excluding wool-containing woven fabrics, wool-containing knitted fabrics, elastic fabrics and provides three time and temperature combinations to be selected as appropriate. | |
| Price Code : B | |
| MS 1153 : 1989 | |
| Methods of test for flammability of vertically oriented textile fabrics and fabrics assemblies subjected to a small igniting flame. | |
| Specifies test methods for observing and measuring aspects of the flammability (when subjected to a small igniting flame) for vertically oriented textile fabrics. Three test methods are specified. Test 1 is to find the minimum flame application time that causes ignition while Test 2 is to observe the extent of vertical and horizontal spread of flame and the flaming behaviour of the material. Test 3 is similar to Test 2 but it is for fabrics in which any part of any hole or any part of the lowest boundary of any flame reaches the upper edge or either of he vertical edges. | |
| Price Code : C | |
| MS ISO 675 : 2003 | |
| Textiles – Woven fabrics - Determination of dimensional change on commercial laundering near the boiling point. | |
| This Malaysian Standard specifies a method for the determination of the dimensional change (shrinkage or stretch) of all types of woven fabrics after commercial laundering near the boiling point. This standard replaces MS 55: Part 7: 1972. | |
| Price Code : A | |
| MS ISO 1130 | |
| Textile fibres – Some methods of sampling for testing. | |
| This Malaysian Standard specifies several methods for preparing laboratory samples of fibres, and presents a limited treatment of the problem of drawing specimens for testing. This standard replaces MS 497:1977. | |
| Price Code : B | |
| MS ISO 1833 : 2003 | |
| Textiles – Binary fibre mixtures – Quantitative chemical analysis. | |
| This Malaysian Standard contains methods for the quantitative chemical analysis of various binary mixtures of fibres. The methods given are applicable in general to fibres on any textile form. Where certain textile forms are excepted, these are listed in the “field of application” clause of the individual method. This standard replaces MS 499:1977. | |
| Price Code : C | |
| MS ISO 3801 : 2003 | |
| Textiles – Woven fabrics – Determination of mass per unit length and mass per unit area. | |
| This Malaysian Standard specifies method for the determination of a)the mass per unit length; and b)the mass per unit area of woven fabrics that have been conditioned in the standard atmosphere for testing. This standard replaces MS 55: Part 5:1972. | |
| Price Code : A | |
| MS ISO 4920 : 2003 | |
| Textiles – Determination of resistance to surface wetting (spray test) of fabrics. | |
| This Malaysian Standard is identical with ISO 4920:1981. This Malaysian Standard specifies a test method for determining the resistance of any fabric – which may or may not have been given a water-resistant or water-repellent finish – to surface wetting by water. This Malaysian Standard replaces MS 357:1976 | |
| Price Code : A | |
| MS ISO 6941 : 1996 | |
| Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens. | |
| This Malaysian Standard specifies a method for the measurement of flame spread properties of vertically oriented textile fabrics intended for apparel, curtains and draperies in the form of single or multi-component (coated, quilted, multilayered, sandwich construction and similar combinations) fabrics. | |
| Price Code : B | |
| MS ISO 7211/2 : 2003 | |
| Textiles – Woven fabrics – Construction - Methods of analysis – Part 2: Determination of number of threads per unit length. | |
| This part of MS ISO 7211 specifies three methods for the determination of the number of threads per centimetre in woven fabrics. Any of the three methods may be used, the choice depending on the character of the fabric. However, in case of dispute method A is recommended. This standard replaces MS 55: Part 8:1972. | |
| Price Code : A | |
| MS ISO 7771 : 2003 | |
| Textiles – Determination of dimensional changes of fabrics induced by cold water immersion. | |
| This Malaysian Standard specifies a method for the determination of the dimensional changes that occur when a fabric is subjected to immersion in cold water without agitation, and dried. It is applicable to fabrics which, in use, are subjected to cold water without agitation. This standard replaces MS 55: Part 6:1972. | |
| Price Code : A | |
| MS ISO 13934-1 : 2003 | |
| Textiles – Tensile properties of fabrics – Part 1: Determination of maximum force and elongation at maximum force using the strip method. | |
| This Malaysian Standard is identical with ISO 13934-1:1999. This Malaysian Standard specifies a method for the determination of the maximum force and elongation at maximum force of textile fabrics using a strip method, mainly applicable to the woven fabrics. This Malaysian Standard replaces MS 55: Part 9:1972. | |
| Price Code : B | |
| MS ISO 13934-2 : 2003 | |
| Textiles - Tensile properties of fabrics – Part 2: Determination of maximum force and elongation at maximum force using the grab method. | |
| This Malaysian Standard is identical with ISO 13934-2:1999. This Malaysian Standard specifies a method for the determination of the maximum force and elongation at maximum force of textile fabrics using a grab method, mainly applicable to the woven fabrics. | |
| Price Code : B | |
Coated fabrics |
|
| MS 514 : 1977 | |
| Specification for PVC coated fabrics for upholstery and other purposes. | |
| Specifies requirements, number of cuts in the roll, marking and sampling. Coating is of polyvinyl chloride. | |
| Price Code : C | |
| MS 515 : 1977 | |
| Methods of test for PVC coated fabrics. | |
| Tests include determination of plasticizer evaporation, resistance to flex cracking, breaking load and elongation, coating adhesion, tear strength and others. | |
| Price Code : D | |
Ropes |
|
| MS 425 : 1976 | |
| Method for the sampling and conditioning of ropes for testing. | |
| Outlines sampling, test specimens and conditioning. | |
| Price Code : A | |
| MS 442 : 1976 | |
| Methods for the determination of certain physical and mechanical properties of ropes. | |
| Specifies for rope of different kinds, methods to determine net mass per metre; lay; diameter or circumference and breaking strength. | |
| Price Code : C | |
| MS 504 : 1977 | |
| Specification for man-made fibre ropes : Polyamide (nylon) polyester and polyethylene filament ropes. | |
| Specifies requirements for the manufacture of 3-strand (hawser laid) rope made from polyamide (nylon), polyester and polyethylene continous filaments, and of 8-strand (plaited) ropes made from polyamide (nylon) continous filaments. | |
| Price Code : C | |
Textile floor coverings |
|
| MS 309 : 1975 | |
| Specification for machine-made textile floor coverings : Sampling and cutting specimens for physical tests. | |
| Procedure to be followed when samples are taken from a bulk supply of textile floor covering, and when specimens are cut from these samples for physical tests. | |
| Price Code : A | |
| MS 310 : 1975 | |
| Method for the determination of mass of total pile yarn per unit area of carpets. | |
| Applicable to all the pile carpets with an untreated back. | |
| Price Code : A | |
| MS 585 : 1979 | |
| Method for the determination of linear density of textile fibres - Gravimetric method. | |
| Two methods, applicable to bundles of fibres and individual fibres, respectively provided. Not applicable to wool or textured fibres. | |
| Price Code : A | |
Materials for the reinforcement of composite |
|
Materials for the reinforcement of composite in general |
|
| MS ISO 1043 : Part 2 : 1994 | |
| Plastics - Symbols : Part 2 : Fillers and reinforcing materials. | |
| This Part of Malaysian Standard provides uniform symbols for terms relating to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its alm is alm is to prevent the occurrence of more than one symbol for a given filler or reinforcing materials, and to prevent the interpretation of a given symbol in more than one way. | |
| Price Code : B | |
Leather technology |
|
Raw skins, hides and pelts |
|
| MS 460 : 1984 | |
| Specification for classification of cattle hides and calfskins (First revision). | |
| Specifies criteria used in the classification of Malaysian cattle hides and calfskins including definition of terms. | |
| Price Code : A | |
| MS 461 : 1983 | |
| Classification of buffalo hides and calfskins (First revision). | |
| Includes definition of terms, procedure for classifying, trimming, weighing and marking. | |
| Price Code : A | |
Leather and Furs |
|
| MS 462 : 1984 | |
| Glossary of leather terms (First revision). | |
| Defines terms used in the leather trade which are of interest to tanners or their customers or the general public. | |
| Price Code : D | |
| |
|