Home Table Of Content Previous Page: 61 Next Page: 67


 

65

AGRICULTURE


65.020

Farming and forestry


 

65.020.20

Plant growing


 
MS 320 : 1989
Methods of sampling and test for seeds (First revision).
Prescribes methods of sampling and test for seeds used in propagation. Terms used in trade and industry are included.
Price Code : E
 
MS 463 : 1994
Spec. for rubber (Hevea brasiliensis L.) seed for commercial planting (First revision).
This Malaysian Standard prescribes the quality requirements for rubber (Hevea brasiliensis ) seeds for commercial plantings.
Price Code : B
 
MS 464 : 1976
Specification for leguminous cover crop seed for planting.
Price Code : B
 
MS 543 : 2001
Specification for the production of vegetable seeds (First revision)
This Malaysian Standard specifies the quality requirements and guidance for the production of conventional and hybrid vegetable seeds. The vegetable seed referred to shall be the seed of a vegetable variety multiplied according to the method specified in this standard. This Malaysian Standard only specifies the vegetable variety that can be cultivated locally. This standard supersedes MS 543 : 1978.
Price Code : B
 
MS 549 : 1993
Specification for rubber (Hevea brasiliensis) clonal materials for planting (First revision).
This Malaysian Standard is the first revision of MS 549, 'Specification for rubber clonal material for commercial planting,' which was published in 1978. This revision incorporates a number of modifications. This standard specifies the requirements for rubber clonal materials such as budwood/budsticks, budded stumps, stumped buddings/core-stumps and container-budding. Guidelines on packing and labelling of budwood/budsticks are also provided.
Price Code : B
 
MS 809 : 1983
Specification for groundnut seeds for planting.
Prescribes production and quality requirements. To be used in conjunction with MS 320 for sampling and test.
Price Code : A
 
MS 810 : 1983
Specification for composite or open-pollinated maize seeds for planting.
Definitions, requirements, packing and marking procedures listed. To be used with MS 320.
Price Code : A
 
MS 811 : 1983
Specification for hybrid corn or maize seeds for planting.
Prescribes production and quality requirements. Also includes definitions and methods of sampling and test of seeds. To be used in conjunction with MS 320.
Price Code : A
 
MS 1233 : 1991
Specification for fresh cut roses (Unifloral).
This Malaysian Standard specification prescribes the quality requirements for fresh cut unifloral roses of cultivars of the genus Rosa for ornamental purposes.
Price Code : A
 
MS 1280 : 1992
Specification for fresh orchid cut flowers (Spray type).
This Malaysian Standard specification prescribes the grading requirements for fresh orchid cut flowers (spray type) all genera and varieties for ornamental purposes.
Price Code : A
 
MS 1281 : 1992
Specification for fresh cut carnations (Unifloral).
This Malaysian Standard specification prescribes the quality requirements for fresh cut unifloral carnations of cultivars of Dianthus caryophyllusus and its hybrids for ornamental purposes.
Price Code : A
 
MS 1322 : 1993
Specification for durian (Durio zibethinus Murr) clonal materials for planting.
Durian (Durio zibethinus Murr) clonal materials such as bud-grafted and wedge-grafted plants are available in the market and to ensure that they are sold at an acceptable quality and are true to type, several requirements for clonal planting materials such as budwood production, rootstock and grafted plants are recommended to be followed by those interested parties. Guidelines on packing and labelling of budwood are also provided.
Price Code : B
 
MS 1353 : 1994
Specification for fresh cut carnations (Multi-floral).
This Malaysian Standard prescribes the quality requirements for fresh cut multi-floral carnations of cultivar Dianthus caryophyllus and its hybrids for ornamental purposes.
Price Code : A
 
MS 1354 : 1994
Specification for fresh cut chrysanthemum (Multi-floral).
This Malaysian Standard prescribes the quality requirements for fresh cut multi-floral chrysanthemums of cultivar Chrysanthemums morifolium and its hybrids for ornamental purposes.
Price Code : A
 
MS 1355 : 1994
Specification for fresh cut roses (Multi-floral).
This Malaysian Standard prescribes the quality requirements for fresh cut multi-floral roses of the cultivar of the genus Rosa and its hybrids for ornamental purposes.
Price Code : A
 
MS 1377 : 1995
Specification for mango (Mangifera indica L.) clonal materials for planting.
Mango lonal planting material such as bud-grafted plants are available in the market and to ensure that they are sold at an acceptable quality and are to be true-to-type, several requirements for clonal planting materials such as budwood production, rootstock and grafted plants are recommended to be followed by these interested parties. Recommendation for the production and maintenance of rootstocks and the techniques of budgrafting are also provided.
Price Code : B
 
MS 1378 : 1995
Specification for carambola (Averrhoa carambola L.) clonal materials for planting.
Carambola clonal planting material such as bud-grafted plants are available in the market and to ensure that they are sold at an acceptable quality and are to be true-to-type, several requirements for clonal planting materials such as budwood production, rootstock and grafted plants are recommended to be followed by these interested parties. Recommendation for the production and maintenance of rootstocks and the techniques of budgrafting are also provided.
Price Code : B
 
MS 1382 : 1995
Specification for rambutan (Nephelium lappaceum L.) clonal materials for planting.
Rambutan clonal planting material such as bud-grafted plants are available in the market and to ensure that they are sold at an acceptable quality and are to be true-to-type, several requirements for clonal planting materials such as budwood production, rootstock and grafted plants are recommended to be followed by these interested parties. Recommendation for the production and maintenance of rootstocks and the techniques of budgrafting are also provided.
Price Code : B
 
MS 1383 : 1995
Specification for cocoa (Theobroma cacao L.) clonal materials for planting.
This Malaysian Standard prescribes the quality requirements for cocoa clonal materials for planting.This specification covers requirements for clonal materials such as budwood production, packing and labelling of budwood, rootstocks and budded plants. General maintenance of budwood nurseries, recommendations for the production and maintenance of rootstocks and the budding techniques are also provided.
Price Code : B
 
MS 1527 : 2001
Specification for dokong kering (Lansium domesticum Corr.) seedlings for planting
This standard specifies the quality requirements for Dokong Kering seedlings (Lansium domesticum Corr.) including the requirements for production of seedlings.
Price Code : A
 
MS 1562 : 2002
Specification for mangosteen (Garcinia mangostana Lin.) seedlings for planting
This Malaysian Standard specifies the quality requirements for mangosteen seedlings (Garcinia mangostana Lin.) including the requirements for producing mangosteen seedlings.
Price Code : A
 
MS 1716 : 2003
Specification for pomelo (Citrus maxima L.) clonal materials for planting
This Malaysian Standard specifies the quality requirements for clonal planting materials for pomelo (citrus maxima L.syn.C.grandis L.) or locally known as limau bali.
Price RM20
 
 

65.020.30

Animal husbandry breeding


 
MS 1256 : 1992
Specification for rat baits.
This Malaysian Standard prescribes the requirements for commercial rat bait, formulated for rodent control.
Price Code : A
 
MS 1326 : Part 1 : 1993
Specification for cockroach baits : Part 1 : Loose baits.
This Malaysian Standard specifies the requirements for cockroch baits in loose form formulated for the control of cockroaches. The requirements prescribed included the stability of active ingredients, delinquency, efficacy and shelf life. It also specifies the method of sampling and should be used in conjunction with MS 1326: Part 3, 'Specification for cockroach baits : Part 3 : Methods for the evaluation of biological efficacy of cockroach baits'.
Price Code : A
 
MS 1326 : Part 2 : 1993
Specification for cockroach baits : Part 2 : Baits station.
This Malaysian Standard specifies the requirements for cockroch baits in enclosure loose form bait station) formulated for the control of cockroaches. The requirements prescribed included the stability of active ingredients, design and safety of bait station and its efficacy. It also specifies the method of sampling and should be used in conjunction with MS 1326: Part 3, 'Specification for cockroach baits : Part 3 : Methods for the evaluation of biological efficacy of cockroach baits'.
Price Code : A
 
 

65.060

Agricultural machines, implements and equipment


 
MS 398 : 1976
Specification for corrugated fibreboard boxes
Prescribes materials, shape dimensions. and packing and marking requirements for boxes weighing of more than 55kg with contents.
Price Code : B
 
 

65.080

Fertilizers


 
MS 13 : 1993
Specification for ammonium sulphate, fertilizer grade (First revision).
This Malaysian Standard is the first revision of MS 13 which was published in 1971. This revision incorporates no change only streamlining was being done. The requirements for ammoniacal nitrogen content, free acidity, free acidity content and moisture content have specified.
Price Code : A
 
MS 14 : Part 1 : 1993
Specification for urea, fertilizer grade : Part 1 : Granular urea (First revision).
This Malaysian Standard is the first revision of MS 14 which was published in 1971. This revision incorporates a number of major changes to the existing requirements such as granular and prilled urea have been differentiated into 2 specifications; for granular urea, two particles sizes were introduced namely small and medium size, and the maximum limit of biuret was increased from 0.5% to 1% for granular urea. This standard is to be used in conjunction with MS 417.
Price Code : A
 
MS 14 : Part 2 : 1993
Specification for urea, fertilizer grade : Part 2 : Prilled urea (First revision).
This Malaysian Standard is the first revision of MS 14 which was published in 1971. This revision incorporates a number of major changes to the existing requirements such as granular and prilled urea have been differentiated into 2 specifications and the particle size of prilled urea. This standard is to be used in conjunction with MS 417.
Price Code : A
 
MS 15 : 1993
Specification for potassium chloride, fertilizer grade (First revision).
This Malaysian Standard is the first revision of MS 15 which was published in 1971. This revision incorporates a major change to the existing requirements on potassium content and moisture content.
Price Code : A
 
MS 16 : 1993
Specification for potassium sulphate, fertilizer grade (First revision).
This Malaysian Standard is the first revision of MS 16 which was published in 1971. This revision incorporates a number of major changes to the existing requirements such as the levels of potassium and chloride. The moisture content had been retained.
Price Code : A
 
MS 46 : 1998
Specification for ground phosphate rock, agricultural grade (Second revision).
This revised Malaysian Standard specifies the requirement for ground phosphate rock, agricultural grade. This standard is based on the current practices and requirements of the local industries and relevant authorities. The major changes featured in this revision are as follows:
(1) Particle size; (2) Total P2O5 content; (3) Citric acid soluble P2O5 content; (4) Exclusion of fluoride content.
This standard supersedes MS 46 : 1993 (First revision).
Price Code : A
 
MS 47 : 1972
Specification for bat guano, fertilizer.
Four grades of bat guano fertilizer are noted and defined. Requirements with respect to total phosphate content are stated together with appendices on sampling and test methods.
Price Code : A
 
MS 48 : 1993
Specification for ground magnesium limestone, agricultural grade (First revision).
This Malaysian Standard is the first revision of MS 48 which was published in 1972. This revision incorporates no changes, only streamlining was done. The requirements for magnesium (as MgO), neutralizing value and moisture content have been specified.
Price Code : A
 
MS 49 : 1994
Specification for compound fertilizers, ordinary grade (Second revision).
This Malaysian Standard prescribes requirements for compound fertilizer, ordinary grade. This is the second revision of MS 49 which was first published in 1972 and revised in 1984. This second revision incorporates no changes, only streamlining was being done. This standard is to be used in conjunction with MS 417 'The analysis of fertilizer' and shall supersede MS 49 : 1984.
Price Code : A
 
MS 50 : 1993
Specification for calcium ammonium nitrate fertilizers (First revision).
This revision incorporates no changes, only streamlining was done. The requirements for nitrogen content and moisture content have been specified.
Price Code : A
 
MS 51 : 1993
Specification for single superphosphate (First revision).
This revision incorporates major amendments to the existing standard, concentrating only on the specification for single superphosphate. The requirements for water-soluble phosphorus (as P2O5) content, free phosphoric acid (as P2O5) content and moisture content have been specified.
Price Code : A
 
MS 52 : 1993
Specification for ammonium sulphate nitrate fertilizer (First revision).
This Malaysian Standard is the first revision of MS 52 which was published in 1972. This revision incorporates no changes, only streamlining was done. The requirements for total nitrogen content and moisture content have been specified.
Price Code : A
 
MS 53 : 1993
Specification for ammonium nitrate fertilizer (First revision).
This revision incorporates no changes, only streamlining was done. The requirements for total nitrogen content and moisture content have been specified.
Price Code : A
 
MS 54 : 2001
Specification for magnesium sulphate, fertilizer grade (Second revision)
This Malaysian Standard specifies the requirements for magnesium sulphate, fertilizer grade. This standard supersedes MS 54 : 1993
Price Code : A
 
MS 417 : Part 1 : 1994
The analysis of fertilizers : Part 1 : Method of sampling and sample preparation (First revision).
This part of Malaysian Standard prescribes method of sampling and sample preparation for fertilizers, both in packages and in bulk form.
Amendment 1:2001
Price Code : A   
 
MS 417 : Part 2 : 1994
The analysis of fertilizers : Part 2 : Method for the determination of moisture content, particle size and ash content (First revision).
This part of Malaysian Standard prescribes method for determination of moisture content, particle size and ash content.
Amendment 1:2001
Price Code : A   
 
MS 417 : Part 3 : 1994
The analysis of fertilizers : Part 3 : Method for the determination of nitrogen (First revision).
This part of Malaysian Standard prescribes method for the determination of nitrogen in fertilizers.
Price Code : C
 
MS 417 : Part 4 : 1994
The analysis of fertilizers : Part 4 : Method for the determination of phosphorus (First revision).
This part of Malaysian Standard prescribes method for determination of phosphorus in the fertilizers. The phosphorus content is expressed in the form of P2O5.
Amendment 1:2001
Price Code : B   
 
MS 417 : Part 5 : 1994
The analysis of fertilizers : Part 5 : Method for the determination of potassium (First revision).
This part of Malaysian Standard prescribes method for determination of potassium in fertilizers, namely the Flame Photometric Method.
Amendment 1:2001
Price Code : A  
 
MS 417 : Part 6 : 1994
The analysis of fertilizers : Part 6 : Method for the determination of magnesium (First revision).
This part of Malaysian Standard prescribes method for the determination of magnesium in the fertilizers, namely Atomic Absorption Spectrophotometric Method.
Amendment 1:2001
Price Code : A   
 
MS 417 : Part 7 : 2001
The analysis of fertilizers : Part 7 : Method for the determination of boron (Second revision)
This part of MS 417 prescribes methods for the determination of boron in fertilizers. This standard supersedes MS 417 : Part 7 : 1994.
Price Code : B
 
MS 417 : Part 8 : 1997
The analysis of fertilizers : Part 8 : Method for the determination of secondary properties (First Revision).
The revision incorporates major amendments and the standard is the eight part in a series to provide method for the determination of secondary properties. The method prescribed the determination of neutralising value in liming material urete, free acidity, fluoride, chloride. Sulphate, calcium and carbonate.
Amendment 1:2001
Price Code : B   
 
MS 643 : 2003
Glossary of terms used in the fertilizer trade and industry (First revision).
This Malaysian Standard defines the terms widely used in the fertilizer trade and industry in this country. This Malaysian Standard replaces MS 643:1980.
Price Code : B
 
MS 644 : 1995
Specification for fertilizer mixtures (First revision).
This revised Malaysian Standard prescribes the requirements for physical mixtures of fertilizers. Packaging, marking and labelling requirements are also laid down in this standard. This standard is to be used in conjunction with MS 417 and is intended to supersede MS 644:1980.
Price Code : A
 
MS 909 : 1994
Specification for compound fertilizer, premium grade (First revision).
Price Code : A
 
MS 1328 : 1993
Specification for triple superphosphate, fertilizer grade.
This Malaysian Standard was drawn up due to the need for a more specific standard for a commercial product fertilizer.
Price Code : A
 
MS 1329 : 1993
Specification for diammonium phosphate, fertilizer grade.
This Malaysian Standard was drawn up due to the need for a more specific standard for ammonium phosphates product fertilizer.
Price Code : A
 
MS 1330 : 1993
Specification for ammonium chloride, fertilizer grade.
This Malaysian Standard was drawn up to ensure that the fertilizers imported into the country are of the same high quality of fertilizers available in the international market.
Price Code : A
 
MS 1363 : 1994
Specification for disodium tetraborate pentahydrate fertilizer.
 
Price Code : A
 
MS 1517 : 2001
Specification for organic fertilizers
This Malaysian Standard specifies the requirements for organic fertilizers.
Price Code : A
 
 

65.100

Pesticides and other agrochemicals


 
MS 23 : Part 1 : 1998
Specification for mosquito coils : Part 1 : Physical and chemical requirements (Third revision)
This Malaysian Standard prescribes physical and active ingredient requirements and methods of test for mosquito coils.
 
Price Code : B
 
MS 23 : Part 2 : 1996
Specification for mosquito coils : Part 2 : Method for the evaluation of biology efficacy : Glass chamber method.
This Malaysian Standard provides a satisfactory means to determine relative effiency of mosquito coils. Tests run in conjunction with standard mosquito coil, the latter's preparation is appended.
Price Code : A
 
MS 23 : Part 2 : 2003
Specification for mosquito coil: Part 2: Method for the evaluation of biological efficacy - Glass chamber method (Second revision).
This Malaysian Standard prescribes the method for the evaluation of the biological efficacy of mosquito coil by the use of glass chamber method.This method provides a satisfactory means of determining the relative efficacy of mosquito coil.

NOTES:
1. As a biological test, it is subject to the variation that accompanies the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of insecticides.
2. In order to measure the effectiveness with reasonable tolerance, the test is run in conjunction with standard mosquito coil
(Appendix A).

Price Code : A
 
MS 23 : Part 3 : 1998
Specification for mosquito coils : Part 3 : Method for the evaluation of biology efficacy : Peet Grady method.
This Malaysian Standard describes the method for evaluation of the biological efficacy of mosquito coil against mosquitoes by the use of Peet Grady Chamber. This method provides a satisfactory means of determining the relative effifacy of mosquito coil.
Price Code : 00
 
MS 409 : 1976
Code of practice for the packaging and storage of pesticides.
Guidance is given on standard-size, packaging materials and manner of packaging and storage.
Price Code : B
 
MS 1044 : Part 1 : 2002
Specification for mosquito vapourising mats : Part 1 : Physical and chemical requirements (First revision)
This Malaysian Standard prescribes the requirements and methods of test for mosquito vapourising mat. This standard is not applicable to the electrical heating device for use in the evaporation of the active ingredient present in the mosquito vapourising mat. This standard supersedes MS 1044 : Part 1 : 1986.
Price Code : A
 
MS 1044 : Part 2 : 2002
Specification for mosquito vapourising mats : Part 2 : Method for the evaluation of biological efficacy - Glass chamber method (First revision)
This Part of the Malaysian Standard prescribes the method for evaluation of the biological efficacy of mosquito vapourising mat by the use of glass chamber method. This method provides a satisfactory means of determining the relative efficacy of mosquito vapourising mat. This standard supersedes MS 1044 : Part 2 : 1986.
Price Code : A
 
MS 1044 : Part 3 : 1998
Specification for mosquito vaporising mats : Part 3 : Method for the evaluation of biology efficacy : Glass cylinder method
This Malaysian Standard describes the method for the evaluation of biological efficacy of mosquito mat by use of glass cylinder method. This method provides a satisfactory means of determining the relative efficacy of mosquito mat.
Price Code : A
 
MS 1044 : Part 4 : 2002
Specification for mosquito vapourising mat : Part 4 : Method for the evaluation of biological efficacy - Peet grady method
This part of the Malaysian Standard prescribes the method for evaluation of the biological efficacy of mosquito vapourising mat by the use of Peet Grady method. This method provides a satisfactory means of determining the relative efficacy of mosquito vapourising mat.
Price Code : A
 
MS 1326 : Part 3 : 2002
Specification for cockroach bait station: Part 3 : Method for the evaluation of biological efficacy of cockroach bait station (First revision)
This Malaysian Standard prescribes the method for the evaluation of the biological efficacy of cockroach bait station. This standard supersedes MS 1326 : Part 3 : 1993.
Price Code : A
 
MS 1398 : Part 1 : 2003
Specification for mosquito electric vapourising liquid: Part 1: Physical and chemical requirements (First revision)
This Malaysian Standard prescribes the physical and chemical requirements of mosquito electric vapourising liquid.This standard is not applicable to the electric heating/vapourising device for use in the evaporation of the active ingredient present in the chemical.

NOTE. Attention is drawn to the mandatory requirement that mosquito electric vapourising liquid marketed in this country shall be registered with the Pesticides Board under the Pesticides Act. 1974.

Price Code : B
 
MS 1398 : Part 2 : 2003
Specification for mosquito electric vapourising liquid: Part 2: Method for the evaluation of biological efficacy - Glass chamber method (First revision)
This Malaysian Standard prescribes the method for the evaluation of the biological efficacy of mosquito electric vapourising liquid by the use of glass chamber method.This method provides a satisfactory means of determining the relative efficacy of mosquito electric vapourising liquid.

NOTES:
1. As a biological test, it is subject to the variation that accompanies the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of insecticides.
2. In order to measure the effectiveness with reasonable tolerance the test is run in conjunction with standard mosquito electric vapourising liquid (Appendix A).

Price Code : A
 
MS 1398 : Part 3 : 2003
Specification for mosquito electric vapourising liquid: Part 3: Method for the evaluation of biological efficacy - Glass cyclinder method (First revision)
This Malaysian Standard prescribes the method for the evaluation of the biological efficacy of mosquito electric vapourising liquid by the use of glass cylinder method.This method provides a satisfactory means of determining the relative efficacy of mosquito electric vapourising liquid.

NOTES:

1. As a biological test, it is subject to the variation that accompanies the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of insecticides.
2. In order to measure the effectiveness with reasonable tolerance, the test is run in conjunction with standard mosquito mat
(Appendix A).

Price Code : A
 
MS 1398 : Part 4 : 2003
Specification for mosquito electric vapourising liquid: Part 4: Method for the evaluation of biological efficacy-Peet grady chamber method
This Malaysian Standard prescribes the method for the evaluation of the biological efficacy of mosquito electric vapourising liquid by the use of Peet Grady chamber method. The method provides a satisfactory means of determining the relative efficacy of mosquito electric vapourising liquid. NOTES: 1. As a biological test, it is subject to the variation that accompanies the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of insecticides. 2. In order to measure the effectiveness with reasonable tolerance, the test is run in conjunction with standard electric vapourising liquid (Appendix A).
Price Code : A
 
MS 1497 : 2000
Methods of biological evaluation of the efficacy of repellent - Bioassay method for mosquito repellent on human skin
This Malaysia Standard describes the bioassay method for the relative efficacy of mosquito repellent on human skin in a designated laboratory environment.
Price Code : A
 
MS 1518 : Part 1 : 2001
Specification for glyphosate : Part 1 : Glyphosate (Technical)
This Malaysian Standard specifies requirements for technical grade of glyphosate.
Price Code : C
 
MS 1518 : Part 2 : 2001
Specification for glyphosate : Part 2 : Glyphosate soluble concentrates
This Malaysian Standard specifies the requirements and methods for glyphosate in the form of a soluble concentrate for the control of weeds.
Price Code : A
 
MS 1519 : 2001
Method of test for hormone weedkillers of the phennoxyacetic acid (2,4-D)
This Malaysian Standard prescribes the methods of analysis for hormone weedkillers of the phenoxyacetic acid (2,4-D).
Price Code : H
 
MS 1717 : Part 1 : 2003
Specification for diuron : Part 1 : Diuron technical
This Malaysian Standard specifies requirements and test methods for technical grade diuron
Price RM10
 
MS 1717 : Part 2 : 2003
Specification for diuron : Part 2 : Diuron wettable powder
This Malaysian Standard specifies requirements and test methods for diuron wettable powders for the control of weeds.
Price RM10
 
MS 1717 : Part 3 : 2003
Specification for diuron : Part 3 : Diuron water-dispersible granules
This Malaysian Standard specifies requirements and test methods for diuron in the form of water-dispersible granules for the control of weeds
Price RM10
 
MS 1717 : Part 4 : 2003
Specification for diuron : Part 4 : Suspension concentrate
This Malaysian Standard specifies requirements and test methods for diuron suspension concentrate for the control of weeds.
Price RM10
 
 

65.100.01

Pesticides and other agrochemical in general


 
MS 185 : 1974
Methods of sampling agricultural pesticides.
General directions, sampling devices and procedures are outlined.
Price Code : B
 
MS 323 : 1976
Specification for provisional common names for pesticides (First list).
Gives provisional common names for pesticides and includes their established chemical names, structural formulae and uses.
Price Code : B
 
MS 428 : 1976
Code of practice for safety in the manufacture and handling of pesticides.
Guidance on safety measure required in the manufacture, formulation, packing, re-packing and handling of pesticides, including raw materials used in their manufacture.
Price Code : A
 
MS 479 : 1977
Code of recommended practice for the safe handling of agricultural pesticides and growth regulants.
Covers recommendations on transportation, storage, leakages and spillage, disposal of remnants and empty containers, preparing pesticides for use, applying chemicals, protective clothing for various operation and medical facilities.
Price Code : C
 
MS 480 : 1977
Code of practice on the safety labeling of pesticide products.
Provides guidelines on safety precautions and related matters, on labels or accompanying instructions of pesticides products.
Price Code : F
 
MS 658 : 1980
Specification for lead arsenate technical for pesticide preparations.
In powder form. Covers requirements for lead and arsenic content, tolerance, water soluble arsenic, acidity and alkalinity and wet sieve test. Labeling and caution statement also included.
Price Code : A
 
MS 659 : 1980
Specification for fenitrothion technical for pesticidal preparations.
Yellow brown liquid. Specifies requirements for fenitrothion content, acidity and alkalinity, water content, material insoluble in acetone, impurities and weight per ml. Labeling and caution statement also specified.
Price Code : A
 
MS 660 : 1980
Specification for trichloroform technical for pesticidal preparations.
Crystalline powder. Specifies requirements for trichloroform, material insoluble in acetone, acidity and alkalinity, melting point. Labelling and caution statement also specified.
Price Code : A
 
MS 665 : 1980
Specification for fenitrothion water dispersible powders.
In powder form. Specifies requirements for fenitrothion content, impurities, acidity and alkalinity, wet sieve test, suspensibility, wettability of the powder, persistent foam and heat stability.
Price Code : A
 
MS 666 : 1980
Specification for trichloroform water soluble powders as pesticide.
Covers requirements for active ingredients, solid material insoluble in water, acidity and alkalinity, water content, wet sieve test, rate of solution, persistent foam and heat stability. Labelling and caution statement also specified.
Price Code : A
 
MS 730 : 1981
Specification for endosulfan dispersible powders.
Prescribes requirements, sampling and test methods as contained in CIPAC Handbook Vol. 1 (1970).
Price Code : A   &nbspAmendment 1 : 1986
 
MS 731 : 1981
Specification for endosulfan technical for pesticidal preparations.
Prescribes requirements, sampling and test methods as contained in CIPAC Handbook Vol. 1 (1970).
Price Code : A
 
MS 747 : 1981
Specification for gamma-BHC emulsifiable concentrates.
Specifies requirements and methods contained in CIPAC Handbook Vol. 1 (1970) for the above to be used for pesticidal purposes.
Price Code : A
 
MS 748 : 1981
Specification for endosulfan emulsifiable concentrates.
Specifies requirements for concentrates, pesticidal purpose. Test methods from CIPAC Handbook Vol. 1 (1970) appended.
Price Code : A
 
MS 749 : 1981
Specification for endosulfan dusts.
States requirements for endosulfan dusts for pesticidal purpose. Test methods from CIPAC Handbook Vol. 1 (1970) appended.
Price Code : A   &nbspAmendment 1 : 1986
 
MS 1311 : 1993
Specification for metal aerosol dispensers for household pesticides.
This Malaysian Standard specifies requirements for materials, constructions, performance and marking for non-refillable metal aerosol dispensers for household pesticides up to 1000 ml maximum brimful capacity and up to 65 mm internal diameter, pressurized by liquefied, dissolved or compressed propellant gases.
Price Code : B
 
MS 1398 : Part 1 : 1996
Specification for mosquito electric liquid vaporizer : Part 1 : Physical and chemical requirements.
This Malaysian Standard specifies the requirements and method of test for moisquito electric liquid vaporizer. This standard is not applicable to the electric heating/vaporizer device for use in the evaporation of the active ingredient present in the chemical. This standard prescribes the physical and chemical requirements of the liquid vaporizer which includes the cartridge that contained the formulation, wick and the active ingredients. It also specifies the method of sampling and should be used in conjunction with MS 1398. Specification for moisquito electric liquid vaporizer Part 2 or Part 3.
Price Code : B
 
MS 1398 : Part 2 : 1996
Specification for mosquito electric liquid vaporizer : Part 2 : Method for the evaluation of biological efficacy - Glass chamber method.
This Malaysian Standard specifies method for the evaluation of biological efficacy of mosquito electric liquid vaporizer by the use of glass chamber method.
Price Code : A
 
MS 1398 : Part 3 : 1996
Specification for mosquito electric liquid vaporizer : Part 3 : Method for the evaluation of biological efficacy - Glass cylinder method.
This Malaysian Standard specifies method for the evaluation of biological efficacy of mosquito electric liquid vaporizer by the use of glass chamber method. The method is applied to living specimens, therefore it is subjected to variation that accompanies the reaction of living organisms.
Price Code : A
 
 

65.100.10

Insecticides


MS 287 : 1975
Specification for dieldrin water-dispersible powders.
Applicable to dieldrin powder for insecticidal purposes.
Price RM10
MS 326 : 1976
Recommended common names for pesticides (First list).
Gives recommended common names, chemical names, structural formulae and uses for pesticides.
Price Code : C
 
MS 382 : 1976
Specification for technical malathion for insecticidal preparations.
Requirements with relevant test methods to determine active ingredients content, acidity, solid material insoluble in acetone, water content and specific gravity provided.
Price Code : B
 
MS 1100 : 1987
Method for the evaluation of the effectiveness of insecticidal aerosol against crawling insects (German cockroaches) : Glass cylinder method.
Prescribes the method for evaluation of the effectiveness of household insecticidal aerosol against German cockroaches and other crawling insects by the use of glass cylinder method.
Price Code : A
 
MS 1130 : 1989
Method for the evaluation of the effectiveness of insecticidal aerosol as contact and residual insecticides : Plywood plaque method.
Prescribes the method for evaluation of the effectiveness of household insecticidal aerosol as contact and residual insecticides against cockroaches.
Price Code : A
 
MS 1131 : Part 1 : 1989
Methods of test for dalapon : Part 1 : Determination of 2,2-dichloropropionic acid content.
Provides a liquid chromatographic method for determining the 2,2-dichloropropionic acid content and it serves as an alternate to the titration method specified in MS 240.
Price Code : A
 
MS 1186 : 1990
Method for the evaluation of biological efficacy of household space spray insecticidal aerosol against flying insects - Glass chamber method.
Prescribes a method for evaluation of the biological efficacy of insecticidal aerosol against mosquitoes and other flying insects by the use of glass chamber.
Price Code : A
 
MS 1221 : 1991
Method for the evaluation of biological efficacy of household space spray insecticidal aerosol against flying insects - Peet Grady method.
This Malaysian Standard prescribes the method for evaluation of the biological efficacy of insecticidal aerosol against mosquitoes and other flying insects by the use of modified Peet Grady chamber.
Price Code : A
 
MS 1255 : 1992
Specification for household residual spray aerosols.
This Malaysian Standard prescribes the requirements for insecticidal residual spray in pressurized aerosol dispensers intended for household use against crawling insects.
Price Code : B
 
MS 1257 : 1992
Specification for household insecticidal space spray aerosols.
This Malaysian Standard prescribes the requirements for insecticidal space spray in pressurized aerosol dispensers intended for household use against crawling insects.
Price Code : B
 
 

65.100.99

Other pesticides and agrochemicals


 
MS 186 : 1974
Specification for chlorates for agricultural weedkillers.
Applies to sodium chlorate for use as weedkillers, with or without fire sup-pressants(s).
Price Code : A
 
MS 240 : 1974
Specification for dalapon sodium salt, water soluble powder.
Applies to dalapon salt (water soluble powder) for use as weed killer in protection of agricultural and horticultural crops.
Price Code : B
 
MS 273 : 1998
Specification for paraquat solutions. (First Revision)
Specifies properties, packaging and methods of test. For use as weedkillers and desiccants in the protection of agricultural and horticultural crops.
Price Code : B
 
MS 401 : Part 1 : 1995
Specification for hormone weedkillers of the phenoxyacetic acid type : Part 1 : Technical 2,4-D (First revision).
The revision incorporates major amendments to the existing standard such that the standard is the first part in a series of specification for hormone weedkillers of the phenoxyacetic acid type. This part specifies requirements for technical grades of 2,4-D for use as weedkillers in the protection of agricultural and horticultural crops. In this first revision, the main changes featured are the separation of the various 2,4-D into different parts and the omission of 2,4,5-T and its derivatives and formulations. Reference to concentrates of the salts of 2, methyl-4-chlorophenoxyacetic acid (MCPA) was also omitted. This standard also deletes a few existing clauses such as the total acid content, melting point and insoluble material. Apart from that, new clauses had also been incorporated i.e. identity test, 2,4-D content, water content, free phenols, solubility in triethanolamine and sulphated ash.
Price Code : A
 
MS 401 : Part 2 : 1995
Specification for hormone weedkillers of the phenoxyacetic acid type : Part 2 : Technical sodium 2,4-D monohydrate (First revision).
The revision incorporates major amendments to the existing standard such that the standard is the second part in a series of specification for hormone weedkillers of the phenoxyacetic acid type. This part specifies requirements for technical grades of 2,4-D for use as weedkillers in the protection of agricultural and horticultural crops. In this first revision, the main changes featured are the separation of the various 2,4-D into different parts and the omission of 2,4,5-T and its derivatives and formulations. Reference to concentrates of the salts of 2, methyl-4-chlorophenoxyacetic acid (MCPA) was also omitted. This standard also deletes a few existing clauses such as the total acid content, melting point and mixed melting point, insoluble material. Apart from that, new clauses had also been incorporated i.e. identity test, 2,4-D content, water content, free phenols, material insoluble in water and rate of solution.
Price Code : A
 
MS 401 : Part 3 : 1995
Specification for hormone weedkillers of the phenoxyacetic acid type : Part 3 : Technical sodium 2,4-D esters (First revision).
The revision incorporates major amendments to the existing standard such that the standard is the third part in a series of specification for hormone weedkillers of the phenoxyacetic acid type. This part specifies requirements for technical grades of 2,4-D for use as weedkillers in the protection of agricultural and horticultural crops. In this first revision, the main changes featured are the separation of the various 2,4-D into different parts and the omission of 2,4,5-T and its derivatives and formulations. Reference to concentrates of the salts of 2, methyl-4-chlorophenoxyacetic acid (MCPA) was also omitted. This standard also deletes a few existing clauses such as the total acid content, melting point and mixed melting point, free phenoxyacetic acid and insoluble material. Apart from that, new clauses had also been incorporated i.e. identity test, 2,4-D content, water content, free phenols, free acidity and suspended solid.
Price Code : A
 
MS 401 : Part 4 : 1995
Specification for hormone weedkillers of the phenoxyacetic acid type : Part 4 : 2,4-D esters emulsifiable concentrates (First revision).
This Malaysian Standard is part of the specification for hormone weedkillers of the phenoxyacetic acid type. This part is an additional specification to the revised Malaysian Standard MS 401:1976. The revision incorporates major amendments to the existing standard such that the standard is the fourth part in a series of specification for hormone weedkillers of the phenoxyacetic acid type. This part specifies requirements for 2,4-dichlorophenoxyacetate esters emulsifiable concentrates for use as weedkillers in the protection of agricultural and horticultural crops. This standard incorporates requirements such as the identity test, 2,4-D content, water content, free phenols, material insoluble in oil, emulsion stability and re-emulsification, flash point, volatility and stability at 54°C.
Price Code : A
 
MS 401 : Part 5 : 1995
Specification for hormone weedkillers of the phenoxyacetic acid type : Part 5 : 2,4-D salt aqueous solution (First revision).
This Malaysian Standard is the first revision of Malaysian Standard MS 401:1976. The revision incorporates major amendments to the existing standard such that the standard is the fifth part in a series of specification for hormone weedkillers of the phenoxyacetic acid type. This part specifies requirements for 2,4-dichlorophenoxyacetate esters emulsifiable concentrates for use as weedkillers in the protection of agricultural and horticultural crops. In this first revision, the main changes featured are the separation of the various 2,4-D into different parts and the omission of 2,4,5-T and its derivatives and formulations. Reference to concentrates of the salts of 2, methyl-4-chlorophenoxyacetic acid (MCPA) was also omitted. A few existing clauses were deleted such as the total acid content, melting point and mixed melting point, insoluble material and re-solution temperature. Apart from that, new clauses had also been incorporated i.e. identity test, 2,4-D content, water content, free phenols, stability on dilution and stability at 54°C.
Price Code : A
 
MS 401 : Part 6 : 1995
Specification for hormone weedkillers of the phenoxyacetic acid type : Part 6 : 2,4-D sodium salt water soluble powder (First revision).
This Malaysian Standard is the first revision of Malaysian Standard MS 401:1976. The revision incorporates major amendments to the existing standard such that the standard is the sixth part in a series of specification for hormone weedkillers of the phenoxyacetic acid type. This part specifies requirements for 2,4-D sodium salt water soluble powder for use as weedkillers in the protection of agricultural and horticultural crops. In this first revision, the main changes featured are the separation of the various 2,4-D into different parts and the omission of 2,4,5-T and its derivatives and formulations. Reference to concentrates of the salts of 2, methyl-4-chlorophenoxyacetic acid (MCPA) was also omitted. A few existing clauses were deleted such as the total acid content, hard water stability and insoluble material. Apart from that, new clauses had also been incorporated i.e. identity test, 2,4-D content, water insoluble and free phenols.
Price Code : A
 
MS 1223 : Part 1 : 1991
Methods of test for rodenticide under laboratory conditions : Part 1 : Oral median lethal dose for acute and chronic rodenticide.
This Malaysian Standard covers the determination of the oral median lethal dose (LD50) for testing rodenticide.
As a biological test, it is subject to the variations that accompany the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of rodenticide.
Price Code : A
 
MS 1223 : Part 2 : 1991
Methods of test for rodenticide under laboratory conditions : Part 2 : No-choice feeding tests.
This Malaysian Standard prescribes a method to assess the free-feeding toxicity of a rodenticide in baits under laboratory conditions. As a biological test, it is subject to the variations that accompany the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of rodenticide.
Price Code : A
 
MS 1223 : Part 3 : 1991
Methods of test for rodenticide under laboratory conditions : Part 3 : Choice-feeding tests.
This Malaysian Standard prescribes a method to determine the palatability and efficacy of rodenticide in the presence of challenge baits. As a biological test, it is subject to the variations that accompany the reactions of living organisms. It should be employed under close supervision of personnel familiar with the biological testing of rodenticide.
Price Code : A
 
 

65.120

Animal feeding stuffs


 
MS 2 : 1981
Specification for coconut cake (First revision).
Describes technical requirements for coconut cake used as animal feedstuffs and in animal feeds. It covers coconut cake produced by a hydraulic process, by an expeller process or by solvent extraction.
Price Code : A
 
MS 20 : 1999
Specification for poultry feeds (Third revision)
Prescribes the specifications for chicken (Gallus domesticus) feeds, whether these are in the form of mash, crumbles and pellets. This standard supersedes MS 20 : 1991.
Price Code : A
 
MS 226 : 1997
Specification for cereal grains (maize, wheat and barley as animal feedstuff (Second revision).
This Malaysian Standard prescribes the requirements and methods of sampling and test for cereal grains for use in animal feeds. The standard covers definition, general quality requirements, legal, method of sampling methods of test, as well as packing and marking requirements. This standard supersedes MS 226 : 1984.
Price Code : A
 
MS 227 : 1981
Specification for fishmeal.
Prescribes requirements, methods of sampling, testing, packing and marking for fishmeal use in animal feeds.
Price Code : A
 
MS 237 : 1985
Specification for wheat bran, wheat pollard and wheat germ.
Prescribes requirements and methods of sampling and test to determine husk of foreign food grains. Other tests quoted in MS 3.
Price Code : A
 
MS 315 : 1975
Specification for bonemeal as an animal feed supplement.
As mineral supplement in animal feeds. Requirements and methods of test are specified.
Price Code : A
 
MS 316 : 1997
Specification for soya bean meal as animal feedstuff (Second revision).
This Malaysian Standard prescribes the requirements and methods of sampling and test or solvent extracted soy bean metal for use in animal feeds. The standard covers definitions, general quality requirements, legal requirement, method of sampling, methods of tests, as well as packing and marking requirements. This standard supersedes MS 316:1981.
Price Code : A
 
MS 318 : 1989
Specification for groundnut meal as animal feedstuff (First revision).
As a source of a good protein supplement, produced by the hydraulic expeller and solvent extraction processes.
Price Code : A
 
MS 319 : 1987
Specification for cassava chips as animal feedstuff (First revision).
Prescribes requirements and methods of sampling and tests to determine hydrocyanic acid. To be used with MS 3.
Price Code : A
 
MS 455 : 1976
Specification for glossary of terms for animal feeding stuffs.
Terms grouped under products rom animal, barley, brewers' and distillers' corn, cottonseed, hay, linseed and flax, marine, milk etc.
Price Code : B
 
MS 456 : 1976
Specification for common salt for animal consumption.
Requirements and test or matter insoluble in water described. To be used together with MS 3.
Price Code : A
 
MS 465 : 1976
Specification for blood meal as an animal feed supplement.
Prescribes requirements in general and properties like moisture, crude protein, crude fat and acid insoluble ash. To be used with MS 3 and MS 231.
Price Code : A
 
MS 565 : 1978
Specification for mineral mixtures for supplementing poultry feeds.
Assists manufactures in compounding mineral mixtures of a quality, which when mixed with feeds, would make available minerals at the desired levels. Ingredients for such mineral mixtures are appended. Methods of test to determine the concentration of each of the requirements are provided in MS 3.
Price Code : B
 
MS 586 : 1979
Specification for pig feeds.
Types, ingredients used, packing and marking outlined. To be used with MS 3 "Methods of test for animal feeds and feedstuffs".
Price Code : A
 
MS 607 : 1987
Specification for palm kernel cake and palm kernel meal as animal feedstuffs (First revision).
Prescribes requirements and methods of sampling and test for palm kernel cake (PKC) and palm kernel meal (PKM) for use as animal feeds.
Price Code : A
 
MS 662 : 1980
Specification for dicalcium phosphate and tricalcium phosphate : Animal feed grade in powder form.
Specifies requirements for moisture, calcium and phosphorus, flourine and acid insoluble ash. Sampling appended.
Price Code : A
 
MS 663 : 1980
Specification for mineral mixtures for supplementing cattle feeds of the type containing salt.
In powder form. Covers requirements for moisture, calcium, phosphorus, salt, iron, iodine, copper, manganese, cobalt, flourine and magnesium. Sampling appended.
Price Code : A
 
MS 743 : 1981
Specification for cattle feeds.
Prescribes types, requirements, sampling methods and ingredients for dairy and beef cattle feeds.
Price Code : B
 
MS 778 : 1982
Specification for rice bran.
For use as animal feedstuff. Specifies requirements for moisture, crude protein, crude fat, crude fibre, total ash, acid-insoluble ash and alfatoxins. Test methods as in MS 3.
Price Code : A
 
MS 1147 : 1989
Specification for dehydrated palm oil mill effluent (POME) as animal feedstuff.
Prescribes requirements and methods of sampling and test. Definitions, packing and marking requirements are also given.
Price Code : A
 
MS 1194 : 1991
Methods for determination of crude protein in foods and feeds.
This Malaysian Standard prescribes the Macro and Micro Kjeldahl methods for the determination of nitrogen content and specifies the factors used in converting nitrogen to crude protein for various foods and feeds. The Auto Kjeldahl method used should be according to the manufacturer' recommendations.
Price Code : B
 
MS 1410 : 1997
Animal feeding stuffs-Determination of T2 toxin
This Malaysian Standard prescribes a method for determination of T2 toxin which is a toxic chemical produced in grains and feed by several species of the pink Fusarium moulds.
Price Code : A
 
MS 1411 : 1997
Animal feeding stuffs-Determination of broken corn and foreign material (BCFM)
This Malaysian Standard prescribes the determination of broken corn and foreign material (BCFM) in animal feeds. The standard covers definition, principle, procedure and expression of results.
Price Code : A
 
MS 1412 : 1997
Animal feeding stuffs-Determination of mould count
This Malaysian Standard prescribes the method of determining mould count in animal feeds. The standard specifies the description of the rose-bengal chloramphenicol agar which is a selective medium for the enumeration of yeasts and moulds. The medium has a neutral pH and chroramphenicol is used a selective agent to suppress the growth of bacteria. Sample preparation, procedure and expression of results are also given.
Price Code : A
 
MS 1413 : 1997
Animal feeding stuffs-Determination of protein solubility index
This Malaysian Standard prescribes the method of test for protein solubility which cwn be measured by treating soya bean meal with 0.2% potassium hydroxide.
Price Code : A
 
MS 1414 : 1997
Animal feding stuff-Determination of crude fibre
This Malaysian Standard prescribed a method for determination of crude fibre by grinding, defatting, boiling with sulphuric acid of standard concentration and separation and washing of the insoluble residue.
Price Code : A
 
MS 1415 : 1997
Animal feeding stuffs-Determination of test weight per bushel
This Malaysian Standard prescribes the method of test for bushel weight of cereal grains. The standard includes definition and procedure of the method.
Price Code : A
 
MS 1416 : 1997
Animal feeding stuffs-Determination of crude fat
This Malaysian Standard prescribes the method for determination of crude fat. The reagent used for the method is anhydrous ether and determination of the fat involves extraction with ether, drying extract, cooling and weighing of the extract.
Price Code : A
 
MS 1448 : 1999
Animal feeding stuffs - Determination of particle size
Specifies a method for the determination of particle size of animal feeds either in the form of mash, crumbles, grain, granular or pellets.
Price Code : A
 
MS 1543 : 2002
Specification for duck feeds
This Malaysian Standard prescribes the specification for duck feeds whether they are in the form of mash, crumbles or pellets.
Price Code : A
 
MS ISO 5506 : 1997
Soya bean products - Determination of urease activity
This Malaysian Standard specifies a method of determining the urease activity of products derived from soya beans. The method allows inadequate cooking of these products to be detected.
Price Code : A
 
MS ISO 5510 : 2003
Animal feeding stuffs - Determination of available lysine.
The standard specifies a method for the determination of the available lysine in animal feeding stuffs containing animal or vegetable proteins.
Price Code : A
 
MS ISO 5983 : 2000
Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Kjeldahl method
Specifies a method for the determination of the nitrogen content of animal feeding stuffs by the Kjeldahl process, and a method for the calculation of the crude protein content. This standard supersedes MS ISO 5983 : 1996.
Price Code : B
 
MS ISO 5984 : 2003
Animal feeding stuffs - Determination of crude ash
This Malaysian Standard is a total adoption of ISO Standard 5984 : 1978 titled "Animal feedings stuffs - determination of crude ash". The standard specifies a method for the determination of crude ash of animal feeding stuffs which involves decomposition of organic matter from a test portion by incineration and weighing of the ash obtained.
Price Code : A
 
MS ISO 5985 : 2003
Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
The standard specifies two procedures for the determination of ash in animal feeding stuffs which is insoluble in hydrochloric acid. Procedure A is applicable to simple organic animal feeding stuffs and to compound feeding stuffs (except those mentioned under procedure B). Procedure B is applicable to minerals, mineral mixtures and compound feeding stuffs of which the ash is insoluble in hydrochloric acid exceeds 1% (m/m) as determined by procedure A.
Price Code : A
 
MS ISO 6490/1 : 2003
Animal feeding stuffs - Determination of calcium content - Part 1 : Titrimetric method
The principle of the involves ashing of a test portion, treatment of the ash with hydrochloric acid and precipitation of the calcium as calcium oxalate, dissolutin of the precipitate in sulphuric acid and titration with standard volumetric potassium permanganate solution of the oxalic acid formed.
Price Code : A
 
MS ISO 6490/2 : 1996
Animal feeding stuffs - Determination of calcium content - Part 2 : Atomic absorption spectrometric method.
The standard involves destruction of any organic matter by incinerating the test portion, dissolution of the calcium by treatment with hydrochloric acid and dilution of the solution obtained, in the presence of lanthanum which is used as a special buffer and determination of the calcium content by atomic absorption spectrometry.
Price Code : A
 
MS ISO 6491 : 2000
Animal feeding stuffs - Determination of phosphorus content - Spectrometric method
Specifies a spectrometric method for the determination of the phosphorus content of animal feeding stuffs. The method is applicable to animal feeding stuffs with a phosphorus content less than 50 g/kg. It is particularly appropriate for the analysis of products with low phosphorus content. For products with higher phosphorus content, application of a gravimetric method is advised, using for instance quinoline phosphomolybdate. This standard supersedes MS ISO 6491 : 1996.
Price Code : A
 
MS ISO 6492 : 2003
Animal feeding stuffs – Determination of fat content
This Malaysian Standard specifies a method for the determination of the fat content of animal feeding stuffs. The method is applicable to animal feeding stuffs except oilseeds residues. For the purposes of this method, the following two categories of animal feeding stuffs are distinguished. Samples of products in category B need a hydrolysis step prior to extraction. Category B: straight feeds of animal origin including milk products; straight feeds of vegetables origin from which fats cannot be extracted without prior hydrolysis; in particular: gluten, yeast, soya and potato proteins, and heat-treated feeds; compound feeds containing the preceding products in such quantities that at least 20 % of the fat content stems from these products. Category A: animal feeding stuffs not mentioned under category B. NOTE. For oilseed residues, a method for the determination of the “oil content” by hexane extraction is specified in ISO 734-1[2], whereas a method for the determination of the “oil content” by diethyl ether extraction is specified in ISO 736[3]. For oilseeds, a method for the determination of the “oil content” by hexane extraction is specified is ISO 659[1].
Price Code : B
 
MS ISO 6493 : 2003
Animal feeding stuffs – Determination of starch content – Polarimetric method
This Malaysian Standard specifies a method for the polarimetric determination of the starch content of animal feeding stuffs and raw materials for animal feeding stuffs. The method is not applicable to products which, besides starch, contain other substances which are optically active during the analysis and do not dissolve in 40 % ethanol. Examples of these products are potato pulp, beet chips, beet leaves, beet tops, yeast, soya products, lupine and products rich in inulin (e.g. chicory roots and Jerusalem artichokes). In these cases an enzymatic determination of the starch content may be used. This method is not applicable for the quantification of starch with an amylose content exceeding 40 % (e.g.high amylose maize starch like Hylon VII). CAUTION. Depending on the intensity of the heat/moisture treatment the product has been subjected to, too low a starch content may be determined.
Price Code : B
 
MS ISO 6495 : 2003
Animal feeding stuffs – Determination of water-soluble chlorides content (First revision)
This Malaysian Standard is identical with ISO 6495:1999. This Malaysian Standard specifies a method for the determination of the water-soluble chlorides content, expressed as sodium chloride, of animal feeding stuffs. This Malaysian Standard replaces MS ISO 6495:1996.
Price Code : B
 
MS ISO 6496 : 2003
Animal feeding stuffs – Determination of moisture and other volatile matter content (First revision).
This Malaysian Standard is identical with ISO 6496:1999. This Malaysian Standard specifies a method for the determination of the moisture (water and other volatile substances) of animal feeding stuffs. This Malaysian Standard replaces MS ISO 6496:1996.
Price Code : B
 
MS ISO 6498 : 2000
Animal feeding stuffs - Preparation of test samples
Specifies methods for the preparation of test samples from laboratory samples of animal feeding stuffs including pet foods. This standard supersedes MS ISO 6498 : 1996.
Price Code : B
 
MS ISO 6651 : 1996
Animal feeding stuffs - Determination of aflatoxin B1 content.
This Malaysian Standard is a total adoption of ISO Standard 6651 : 1987 titled "Animal feeding stuffs - determination of aflatoxin B1 content of animal feeding stuffs. Method A is applicable to oilseeds nad oilseed residues e.g. groundnut, copra, linseed, soya, sesame, babassu palm, manioc meal, maize germ expeller, cereals and cereal products. Pea meal, potato pulp and flour. Method B is applicable to maixed feeding stuffs and to simple feeding stuffs not applicable to feeding stuffs containing citrus pulp.
Price Code : B
 
MS ISO 6654 : 2003
Animal feeding stuffs - Determination of urea content.
This Malaysian Standard is a total adoption of ISO Standard 6654 : 1991 titled "Animal feeding stuffs - determination of urea content". The standard involves suspension in water of the test portion in the presence of a decolorant, stirring of the suspension, then filtration, addition to the filtrate of 4-dimethyl-amino-benzaldehyde (4-DMAB) and spectrometric measurement at 420 nm of the absorbance of the solution thus obtained.
Price Code : A
 
MS ISO 6655 : 2003
Animal feeding stuffs – Determination of soluble nitrogen after treatment with pepsin in dilute hydrochloric acid.
This Malaysian Standard specifies a method for the determination of the soluble nitrogen content of animal feeding stuffs after treatment with pepsin in dilute hydrochloric acid. This method does not distinguish between protein nitrogen and non-protein nitrogen. NOTES: 1.The values obtained on using this method have no direct connection with digestibility in vivo. 2.If non-protein nitrogen is to be excluded from the test result, its content should be determined using an appropriate method.
Price Code : B
 
MS ISO 6865 : 2003
Animal feeding stuffs – Determination of crude fibre content – Method with intermediate filtration.
This Malaysian Standard specifies a method with intermediate filtration for the determination of the crude fibre content. A manual procedure and a semi-automatic procedure are described. The method is applicable to animal feeding stuffs with a crude fibre content greater than 10 g/kg. NOTE. For animal feeding stuffs with a crude fibre content equal to or less than 10 g/kg, the method described in ISO 6541[7] may be used. This International Standard is also applicable to cereals and pulses.
Price Code : B
 
MS ISO 6866 : 2003
Animal feeding stuffs - Determination of free and total gossypol
The standard invovles extraction of the gossypol in the presence of 3-aminopropan-1-ol either with the mixture of 2-propanol and hexane for the determination of free gossypol or with dimethylformamide for the determination of total gossypol; conversion of the gossypol into gossypol-dianiline using aniline, followed by measurement of the absorbance at the wavelength of maximum absorbance (between 435 and 445 nm).
Price Code : A
 
MS ISO 6869 : 2003
Animal feeding stuffs – Determination of the contents of calcium, copper, iron, magnesium, manganese, potassium, sodium and zinc – Method using atomic absorption spectrometry
This Malaysian Standard specifies an atomic absorption spectrometric method for the determination of the contents of calcium (Ca), copper (Cu), iron (Fe), magnesium (Mg), manganese (Mn), potassium (K), sodium (Na) and zinc (Zn) in animal feeding stuffs. The method is applicable to all animal feeding stuffs. The limit of determination for the elements concerned is as follows: K and Na 500 mg/kg; Ca and Mg 50 mg/kg; Cu, Fe, Mn and Zn 5 mg/kg.
Price Code : C
 
MS ISO 6870 : 1996
Animal feeding stuffs - Determination of zearalenone content.
The standard involves extraction of the test portion with a mixture of acetonitrile and potassium
chloride solution, filtration, defatting with iso-octane followed by purification, evaporation, dissolution of the test portion with a mixture of acetonitrile and potassium chloride solution, filtration, defatting with iso-octane followed by purification, evaporation, dissolution of the dry extract and two-dimensional thin layer chromatography is applied. Determination of zearalenone content is made by visual measurement or by measurement of the intensity of the fluorescence of the spot under UV light by comparison with known quantities of zearalenone applied to the same plate. Confirmation of the identity of zearalenone is by using diazotized benzidine reagent.
Price Code : A
 
MS ISO 5514 : 1997
Soya bean product -Determination of cresol red index.
The standard specifies a method for determination of the cresol red index permitting assessment of the degree to which products derived from soya bean have been cooked. In particular, the index allows assessment of any overcooking.
Price Code : A
 
MS ISO 7485 : 2003
Animal feeding stuffs – Determination of potassium and sodium contents – Methods using flame-emission spectrometry.
This Malaysian Standard specifies a calibration method and a standard addition method for the determination of potassium and sodium contents of animal feeding stuffs by flame-emission spectrometry. The standard addition method applies if it is not known whether the emissions measured for potassium or sodium are subject to matrix effects. The limit of determination for potassium and sodium is 0.04 g/kg. The calibration method applies if such matrix effects have been shown to be absent.
Price Code : B
 
MS ISO 14181 : 2003
Animal feeding stuffs – Determination of residues of organochlorine pesticides – Gas chromatographic method.
This Malaysian Standard specifies a gas chromatographic method for the determination of residues of organochlorine pesticides in animal feeding stuffs. The method is applicable to animal feeding stuffs containing residues of one or more of the following organochlorine pesticides and some of their isomers and degradation products: aldrin, op'-DDE, pp’-DDE, op’-DDT, pp’-DDT, dieldrin, endosulfan, endrin,
HCB, -HCH (-BHC), ,-HCH (-BHC), -HCH (-BHC), -HCH (-BHC), heptachlor, heptachlor epoxide, op'-TDE (op'-DDD), pp'-TDE (pp’-DDD) and methoxychlor. The lower determination limit for these organochlorine pesticides is 0.005 g/g. However. the lower determination limit is 0.01 g/g for op'-DDT and pp'-DDT, and 0.05 g/g for methoxychlor.
Price Code : C
 
MS ISO 14182 : 2003
Animal feeding stuffs – Determination of potassium and sodium contents – Methods using flame-emission spectrometry.
This Malaysian Standard specifies a gas chromatographic method for the determination of the residues of organophosphorus pesticides in animal feeding stuffs. The method is applicable to animal feeding stuffs containing residues of one or more of the following organophosphorus pesticides: azinghos-ethyl, azinphos-methyl, bromophos, carbophenothion, chlorpyrifos, chlorpyrifos-methyl, diazinon, dimethoate, ethion, fonofos, malathion, methidathion, parathion, parathion-methyl, pirimiphos-ethyl and pirimiphos-methyl . The lower limit of determination for these organophosphorus pesticides is 0.01g/g. NOTE. The method is probably equally applicable to other organophosphorus pesticides such as methaccrifos and fenitrothion, but it has not been validated for these pesticides.
Price Code : C
 
MS ISO 14565 : 2003
Animal feeding stuffs – Determination of vitamin A content – Method using high-performance liquid chromatography.
This Malaysian Standard specifies a method for the determination of the total vitamin A (retinol) content of animal feeding stuffs and pet foods using high-performance liquid chromatography. The vitamin A content is the content of all-trans-retinyl alcohol and cis-isomers determined by the method described in this Malaysian Standard, and is expressed in International Units per kilogram (lU/kg).
Price Code : B
 
MS ISO 14718 : 2000
Animal feeding stuffs - Determination of aflatoxin B1 content of mixed feeding stuffs - Method using high-performance liquid chromatography
Specifies a high-performance liquid chromatographic (HPLC) method for the determination of aflatoxin B1 content of animal feeding stuffs including those containing citrus pulp. The lower limit of determination in 1 mg/kg. This standard is identical with ISO 14718 : 1998.
Price Code : B
 
MS ISO 14797 : 2003
Animal feeding stuffs – Determination of furazolidone content – Method using high-performance liquid chromatography
This Malaysian specifies a high-performance liquid chromatographic (HPLC) method for determination of the furazolidone content of premixtures and animal feeding stuffs. The method is applicable to animal feeding stuffs with a furazolidone content of 25 mpikg to 5 000 mg/kg an to premixtures with a mass fraction of furazolidone of up to 20 % [formerly written as 20 % (m/m)]. NOTES: 1. For animal feeding stuffs, the furazolidone content is expressed in milligrams per kilogram; for premixtures, as a mass fraction in percent [% (m/m)]. 2. Furazolidone is a chemotherapeuticum belonging to the group of nitrofuranes. Nitrofuranec bactericidal against Gram-positive and Gram-negative microorganisms and against some moulds and protozoa.
Price Code : B
 
MS ISO 14939 : 2003
Animal feeding stuffs – Determination of carbdox content – Method using high-performance liquid charomatography
This Malaysian Standard specifies a high-performance liquid chromatographic (HPLC) method for the determination of the carbadox content in premixtures and animal feeding stuffs. The method is applicable to animal feeding stuffs with a mass fraction of carbadox of 0.5 mg/kg, (limit of quantification) to 100 mg/kg, and to premixtures with a mass fraction of carbadox up to 10 %. The lower limit of detection is 0.1 mg/kg. NOTES: 1. For animal feeding stuffs the mass fraction of carbadox is expressed in milligrams per kilogram, and for premixtures as a percentage by mass. 2. Carbadox is a chemotherapeuticum belonging to the quinoxaline group. Carbadox is used as a growth-promoting feed additive for piglets.
Price Code : C
 
 

65.150

Fishing and fish breeding


 
MS 306 : 1975 (1995)
Specification for netting yarns for fishing nets.
Designation in the tex system. Prescribes method for designation using density or resultant linear density, expressed in tex.
Price Code : A
 
MS 350 : 1976
Specification for nylon fish-net twines.
Prescribes constructional details and other particulars of undyed nylon twines used in the manufacture of fishing nets. Does not specify type of finish, feel, etc, of the twines.
Price Code : B
 
MS 352 : 1976 (1995)
Specification for netting for fishing - Basic terms and definitions
Gives principle terms relating to netting for fishing nets, together with their definitions or, in some cases, the method of expressing dimensions.
Price Code : B
 
MS 439 : 1976 (1996)
Method for the determination of mesh breaking load of netting for fishing.
Test records the applied load to extend in a mesh in a wet or dry state until one of the knots or joints rupture.
Price Code : B
 
MS 440 : 1976 (1996)
Method for the determination of breaking load and knot breaking load of netting yarns for fishing nets.
Test is performed using a suitable apparatus that indicates the load rupture for a length of yarn extended in the wet or dry state.
Price Code : B
 
MS 443 : 1976 (1995)
Specification for hanging of netting: Basic terms.
Principle terms and definitions relating to the hanging of netting for fishing nets.
Price Code : A
 
MS 446 : 1976
Specification for fish nets - Cutting knotted netting to shape (tapering).
Defines different ways to cut knotted netting to shape by straight cut, the types of cutting (N-, T and Bar-cut) and rules for designation of cutting rate.
Price Code : B
 
MS 542 : 1978
Method for describing and designating knotted netting for fishing nets.
Gives information on type of knot, direction of stretch, size of netting, netting yarns and finish at netting.
Price Code : B
 
MS 629 : 1983
Method for describing and designating knotted netting for fishing nets.
Specifies requirements for dimensions, stability mesh, size linear density, breaking load of twin, elongation at breaking load mesh, breaking load, packing and marking. Includes methods of selection of mesh samples and tests.
Price Code : A
 
MS 757 : 1981
Specification for polyethylene monofilament fishing-net twines.
Manufature, requirements, packing, marking and sampling listed. Does not prescribe type of finish, feel etc. of twines.
Price Code : A
 
 

65.160

Tobacco, tobacco products and related equipment


 
MS 324 : Part 1 : 1976
Specification grades for cured tobacco leaves.
Describes grade specifications for cured virginia tobacco leaves grown in Malaysia.
Price Code : A
 
MS 324 : Part 2 : 1976
Specification grades for green virginia tobacco leaves.
Describes grade specifications for green virginia tobacco leaves grown in Malaysia.
Price Code : B
 
MS 324 : Part 3 : 1981
Specification for Malaysian flue cured virginia tobacco leaves.
Requirements, sampling and tests for moisture and chlorine content provided.
Price Code : B
 
 



Home Table Of Content Previous Page: 61 Next Page: 67