| |
|
73 |
MINING AND MINERALS |
Metalliferous minerals |
|
| MS ISO 2597-1 : 2002 | |
| Iron ores - Determination of total iron content - Part 1: Titrimetric method after tin(II) chloride reduction. | |
| This Malaysian Standard specifies a titrimetric method for the determination of the total iron content of iron ores using potassium dichromate after reduction of the trivalent iron by tin(II) chloride. | |
| Price Code : B | |
| MS ISO 7764 : 2002 | |
| Iron ores - Preparation of predried test samples for chemical analysis | |
| This Malaysian Standard specifies a method for the preparation of predried test samples of natural iron ores, and iron ore concentrates and agglomerates, including sinter products, which are to be used for the determination of analytical values of constituents on a dry basis. | |
| Price Code : A | |
| MS ISO 9035 : 2002 | |
| Iron ores - Determination of acid-soluble iron(II) content - Titrimetric method | |
| This Malaysian Standard specifies a method for the determination of iron(II) content in natural and processed iron ores containing from 1 % to 25 % acid-soluble iron(II) and only traces of metallic iron. | |
| Price Code : B | |
Iron Ores |
|
| MS ISO 2596 : 2003 | |
| Iron ores - Determination of hygroscopic moisture in analytical samples - Gravimetric and Karl Fisher methods | |
| This
Malaysian Standard specifies the following two methods
for the determination of 0.05 % (m/m) to 6 % (m/m) of
hygroscopic moisture content in test samples of natural
or processed iron ores: - Method 1 - Gravimetric method; - Method 2 - Karl Fischer method. Either method 1 or method 2 is used where the analytical value of the constituent to be calculated to a dry sample basis is higher than 10 % (m/m) in the following types of ores: a) processed ores containing metallic iron (direct reduced iron); b) natural or processed ores in which the sulfur content is higher than 0.2 % (m/m); c) natural or processed ores in which the content of combined water is higher than 2.5 % (m/m). The result from the determination of hygroscopic moisture using this Malaysian Standard is not reported as part of the analysis of an ore sample. NOTES: 1. Where the reportable hygroscopic moisture content of a commercial consignment of ores is required, the procedure in ISO 3087:1987, Iron ores-Determination of moisture content of a consignment is used. 2. With natural or processed ores outside the field of application specified in a) or b) or c), a determination of a constituent at any level of concentration can be conducted using a predried test sample prepared as specified in ISO 7764:1985, Iron ores-Preparation of predried test samples for chemical analysis. |
|
| Price Code : B | |
| MS ISO 2598-1 : 2002 | |
| Iron ores - Determination of silicon content - Part 1: Gravimetric methods | |
| This Malaysian Standard specifies two gravimetric methods for the determination of the silicon content of iron ores. These methods are applicable, with certain limitations, to silicon contents between 1% (m/m) and 15% (m/m) in natural iron ores, iron ore concentrates and agglomerates, including sinter products. | |
| Price Code : B | |
| MS ISO 2598-2 : 2002 | |
| Iron ores - Determination of silicon content - Part 2: Reduced molybdosilicate spectrophotometric method | |
| This Malaysian Standard specifies a reduced molybdosilicate spectrophorometric method for the determination of the silicon content of iron ores. This method is applicable to silicon contents between 0.1% (m/m) and 5.0% (m/m) in natural iron ores, iron ore concentrates and agglomerates, including sinter products, especially for ores containing fluorine. | |
| Price Code : B | |
|
|
|
|
Iron
ores – Determination of phosphorus content – Titrimetric method |
|
| This standard specifies a titrimetric method for the determination of phosphorus content of iron ores, using hexaammonium heptamolybdate (ammonium molybdate). This method is applicable to a concentration range of 0.10 to 5.0% (m/m) of phosphorus in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 3082 : 2002 | |
| Iron ores - Sampling and sample preparation procedures | |
| This
Malaysian Standard gives: a) the underlying theory, b) the basic principles for sampling and preparation of samples, c) the basic requirements for the design, installation and operation of sampling systems for mechanical sampling, manual sampling and preparation of samples taken from a lot under transfer to determine the chemical composition, moisture content and size distribution of the lot. Sampling and sample preparation procedures for physical testing are specified in ISO 10836. |
|
| Price Code : H | |
| MS ISO 3084 : 2002 | |
| Iron ores - Experimental methods for evaluation of quality | |
| This Malaysian Standard specifies experimental methods for the evaluation of quality variation of iron ores for each type of iron ore being traded and for each handling plant. Two distinct approaches are specified. The first is to analyse interleaved samples composed of a number of paired increments taken and combined alternately following stratified sampling or systematic sampling as specified in ISO 3082. The second is to collect and analyse individual increments and then to analyse the data using variograhic methods. | |
| Price Code : C | |
| MS ISO 3085 : 2002 | |
| Iron ores - Experimental methods for checking the precision of sampling | |
| This Malaysian Standard specifies experimental methods for checking the precision of sampling of iron ores being carried out in accordance with the methods specified in ISO 3081 or ISO 3082. | |
| Price Code : C | |
| MS ISO 3086 : 2002 | |
| Iron ores - Determination of the moisture content of a lot | |
| This Malaysian Standard specifies experimental methods for checking the bias of the sampling of iron ores, when the sampling is carried out in accordance with the methods specified in MS ISO 3081 or MS ISO 3082, having as reference a stopped-belt sampling method according to MS ISO 3081. | |
| Price Code : B | |
| MS ISO 3087 : 2002 | |
| Iron ores - Determination of bulk density | |
| This
Malaysian Standard specifies two methods for measuring
the bulk density of natural and processed iron ores. Method 1 is applicable to iron ores having a maximum particle size of 40 mm or smaller. Method 2 is applicable to iron ores having any maximum particle size. |
|
| Price Code : A | |
| MS ISO 3852 : 2002 | |
| Specification for copper/chrome/arsenic wood preservatives (First revision). | |
| This Malaysian Standard specifies requirements for water-borne wood preservatives which consists essentially to mixtures of copper, chromium and arsenic. This specification covers the composition of the preservative, sampling procedure and methods of chemical analysis. | |
| Price Code : B | |
| MS ISO 3886 : 2004 | |
| Iron ores
– Determination of manganese content –
Periodate spectrophotometric method |
|
| This standard specifies a spectrophotometric method for the determination of manganese content of iron ores. This method is applicable to a concentration range of 0.02 to 8.0% (m/m) of manganese in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 4687-1 : 2004 | |
| Iron ores
– Determination of phosphorus content – Part 1
: Molybdenum blue spectrophotometric method |
|
| This
standard specifies a molybdenum blue spectrophotomettric
method for the determination of phosphorus content of
iron ores. This method is applicable to phosphorus
content between 0.003 to 2.0% (m/m) in natural iron ores,
and iron ore concentrates and agglomerates including
sinter products. The presence of arsenic, barium or
titanium does not affect the result. |
|
| Price RM20 | |
| MS ISO 4688-1 : 2004 | |
| Iron ores – Determination of aluminium content – Part 1 : Flame atomic spectrometric method | |
| This standard specifies a flame atomic spectrometric method for the determination of aluminium content of iron ores. This method is applicable to a concentration range of 0.1 to 5.0% (m/m) aluminium in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 4689 : 2004 | |
| Iron ores – Determination of sulfur content – Barium sulfate gravimetric method | |
| This standard specifies a barium sulfate gravimetric method for the determination of sulfur content of iron ores. This method is applicable to a concentration range of 0.01 to 1.0% (m/m) sulfur in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM10 | |
| MS ISO 4690 : 2004 | |
| Iron ores – Determination of sulfur content – Combustion method | |
| This standard specifies a combustion method for the determination of sulfur content of iron ores. This method is applicable to a concentration range of 0.002 to 0.25% (m/m) sulfur in natural iron ores, and iron ore concentrates and agglomerates including sinter products. The results are not affected by the presence of fluoride. | |
| Price RM10 | |
| MS ISO 4691 : 2004 | |
| Iron ores - Determination of titanium content - Diantipyrylmethane spectrophotometric method | |
| This standard specifies a spectrophotometric method using diantipyrylmethane for the determination of titanium content of iron ores. This method is applicable to a concentration range of 0.01 to 6.0% (m/m) of titanium in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 4693 : 2004 | |
| Iron ores – Determination of copper content – Flame atomic absorption spectrometric method | |
| This standard specifies a flame atomic absorption spectrometric method for the determination of copper content of iron ores. This method is applicable to a concentration of 0.003 to 1.0% (m/m) of copper in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM10 | |
| MS ISO 4701 : 2002 | |
| Iron ores - Determination of size distribution by sieving | |
| This Malaysian Standard specifies the methods to be employed for determination of size distributions by sieving of iron ore, utilizing sieves having aperture sizes of 36 mm or larger. | |
| Price RM40 | |
| MS ISO 6467 : 2004 | |
| Ferrovanadium - Determination of vanadium content - Potentiometric method | |
| This standard specifies a potentiometric method for the determionation of vanadium content for ferrovanadium. The method applies to alloys having a vanadium content less than or equal to 85 % (m/m). | |
| Price RM10 | |
| MS ISO 6830 : 2004 | |
| Iron ores – Determination of aluminium content – EDTA titrimetic method | |
| This
standard specifies a titrimetric method using EDTA for the
determination of aluminium content of iron ores. This method is
applicable to a concentration range of 0.25 to 5.0% (m/m) aluminium in
natural iron ores, and iron ore concentrates and agglomerates
including sinter products.
|
|
| Price RM10 | |
| MS ISO 7834 : 2004 | |
| Iron ores – Determination of arsenic content – Molybdenum blue spectrophotometric method | |
| This standard specifies a molybdenum blue spectrophotometric method for the determination of arsenic content in iron ores. This method is applicable to a concentration range of 0.0001 to 0.1% (m/m) of arsenic in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 9516-1 : 2004 | |
| Iron ores – Determination of various elements by X-ray fluorescence spectrometry – Part 1 : Comprehensive procedure | |
| This standard sets out a wavelength dispersive X-ray fluorencence procedure for the determination of iron, silicon, calcium, manganese, aluminium, titanium, magnesium, phosphorus, sulfur, pottasium, tin, vanadium, chromium, cobalt, nickel, copper, zinc, arsenic, lead and barium in iron ores. The method has been designed to cope with iron ores having high ignition losses. The method is applicable to iron ores regardless of mineralogical type. The determination of total iron content cannot be used for referee purposes. | |
| Price RM70 | |
| MS ISO 9682-1 : 2004 | |
| Iron ores – Determination of manganese content – Flame atomic absorption method | |
| This standard specifies a flame atomic absorption method for the determination of manganese content of iron ores. This method is applicable to a concentration range of 0.01 to 3.0% (m/m) of manganese in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 11534 : 2004 | |
|
Iron ores – Determination of tin content – Flame atomic absorption spectrometric method |
|
| This standard specifies a flame atomic absorption spectrometric method for the determination of tin content of iron ores. This method is applicable to a concentration range of 0.001 to 0.015% (m/m) tin in natural iron ores, and iron ore concentrates and agglomerates including sinter products | |
| Price RM20 | |
| MS ISO 13310 : 2004 | |
| Iron ores – Determination of zinc content – Flame atomic absorption spectrometric method | |
| This standard specifies a flame atomic absorption spectrometric method for the determination of zinc content of iron ores. This method is applicable to a concentration of 0.003 to 1.0% (m/m) of zinc in natural iron ores, and iron ore concentrates and agglomerates including sinter products. | |
| Price RM20 | |
| MS ISO 15967 : 2004 | |
| Direct reduced iron - Determination of tumble strength of hot iron briquetted iron (HBI) | |
| This standard specifies a method for the determination of the tumble strength of hot briquetted (HBI). | |
| Price RM10 | |
Non-metaliferous minerals |
|
| MS 1247 : 1993 | |
| Code of practice on the description and marking of articles of, or containing, precious metal. | |
| This code deals with the description and marking of articles of, precious metals. It does not cover articles which are intended to be used for medical, dental, veterinary, scientific and industrial purposes. | |
| Price Code : A | |
| MS 1365 : Part 1 : 1994 | |
| Methods of test for standard of fineness of precious metals : Part 1: Gold and articles of gold by Cupellation method. | |
| This Malaysian Standard is a first part of a series of Malaysian Standards on determination of standard of fineness for precious metal. It outlines the procedure for determining the standard of fineness for gold and articles of gold alloy by the Cupellation method. This standard has to be used in conjunction with the Malaysian Standard on 'Methods of sampling for precious metals'. | |
| Price Code : A | |
| MS 1366 : 1994 | |
| Methods of sampling for precious metals. | |
| This Malaysian Standard prescribes the procedure for sampling of precious metals such as gold, silver and platinum for purposes of assay. It covers the sampling technique for jewellery items, wires and thin rods, articles of complicated design and also bar or ingot. | |
| Price Code : A | |
Mining equipment |
|
Equipment for drilling and mine excavation |
|
| MS 688 : 1981 | |
| Specification for barytes used in oil-well drilling. | |
| Density, wet screen analysis, limit for water-soluble solids and apparent viscosity provided as performance requirements. Packing, storage, sampling and test methods included. | |
| Price Code : B | |
| |
|