| |
|
77 |
METALLURGY |
Testing of metals |
|
| MS 1365 : Part 2 : 2000 | |
| Method of test for determination of standard of fineness for precious metals : Part 2 : Silver and articles of silver by titrimetric (Potentiometric) method | |
| Specifies a titrimetric (Potentiometric) method for the determination of standard of fineness for silver and articles within the range of fineness as specified in MS 1247 : 1993 Code of practice on the description and marking of articles of, or containing, precious metals. | |
| Price RM10 | |
| MS ISO 83 : 1998 | |
| Steel - Charpy impact test (U-notch) | |
| This Malaysian Standard is identical with ISO 83 : 1976. This standard specifies the charpy impact test (U-notch) method for determining the impact strength of steel. This standard supersedes the Provisional Malaysian Standard MS 805 : 1982 (P). | |
| Price Code : A | |
| MS ISO 1099 : 1998 | |
| Metals- Axial load fatigue testing. | |
| This Malaysian Standard is identical with ISO 1099 : 1975. This standard specifies the conditions for carrying out axial load fatigue tests pieces without deliberately introduced stress concentrations. The tests are carried out at a room temperature, in air, the loading applied to test piece being along the longitudinal axis passing through the centroid of each cross-section. This standard supersedes the Provisional Malaysian Standard MS 801 : 1982(P). | |
| Price Code : A | |
| MS ISO 1143 : 1998 | |
| Metals- Rotating bar bending fatigue testing. | |
| This Malaysian Standard is identical with ISO 1143 : 1975. This standard specifies the conditions for carrying out rotating bar bending fatigue tests on test pieces having a nominal diameter between 5 mm ( 0.2 in) and 12.5mm (0.5 in) without deliberately introduced stress concentrations. The tests are carried out at room temperature, in air, the test piece being rotated. This standard supersedes the Provisional Malaysian Standard MS 802 : 1982(P). | |
| Price Code : A | |
| MS ISO 1352 : 1998 | |
| Steel - Torsional stress fatigue testing. | |
| This Malaysian Standard is identical with ISO 1352 : 1977. This standard specifies the conditions for carrying out torsional stress fatigue tests on test pieces having a nominal diameter between 5 mm and 12.5 mm without deliberately introduced stress concentrations. The tests are carried out at room temperature, in air, by applying to the test piece a pure couple about its longitudinal axis. This standard supersedes the Provisional Malaysian Standard MS 803 : 1982(P). | |
| Price Code : A | |
| MS ISO 6506 : 1998 | |
| Metallic materials - Hardness test - Brinell test. | |
| This Malaysian Standard is identical with ISO 6506 : 1982. This standard specifies the method for the Brinell hardness test for metallic materials. This standard shall supersede the Provisional Malaysian Standard MS 805 : 1982(P). | |
| Price Code : A | |
| MS 1365 : Part 2 : 2000 | |
| Method of test for determination of standard of fineness for precious metals : Part 2 : Silver and articles of silver by titrimetric (Potentiometric) method | |
| Specifies a titrimetric (Potentiometric) method for the determination of standard of fineness for silver and articles within the range of fineness as specified in MS 1247 : 1993 Code of practice on the description and marking of articles of, or containing, precious metals. | |
| Price Code : A | |
| MS ISO 4545 : 2000 | |
| Metallic materials - Hardness test - Knoop test | |
| Specifies the method of Knoop hardness test for metallic materials. It covers test forces up to and including 9.807 N. This standard is identical with ISO 4545 : 1993. | |
| Price Code : A | |
| MS ISO 4546 : 2000 | |
| Metallic materials - Hardness test - Verification of Knoop hardness testing machines | |
| Specifies a method of verification of testing machines for determining Knoop hardness for metallic materials in accordance with ISO 4545. It covers test forces up to and including 9.807 N. The method is applicable only for indentations with diagonals ³ 20 mm. This standard is identical with ISO 4546 : 1993. | |
| Price Code : A | |
| MS ISO 4547 : 2000 | |
| Metallic materials - Hardness test - Calibration of standardized blocks to be used for Knoop hardness testing machines | |
| Specifies a method for the calibration of standardised metal blocks to be used in accordance with MS ISO 4546 for the indirect verification of Knoop hardness testing machines used for determining Knoop hardness. The method is applicable only for indentations with long diagonals ³ 20 mm. This standard is identical with ISO 4547 : 1993. | |
| Price Code : A | |
| MS ISO 1024 : 2000 | |
| Metallic materials - Hardness test - Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) | |
| Specifies a method for the Rockwell superficial hardness test (scales and field of application for metallic materials. This standard is identical with ISO 1024 : 1989. | |
| Price Code : B | |
| MS ISO 1355 : 2000 | |
| Metallic materials - Hardness test - Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) | |
| Specifies a method for the calibration of standardized blocks to be used in Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) for the indirect verification of these machines, as described in ISO 1079. This standard is identical with ISO 1355 : 1989. | |
| Price Code : A | |
| MS ISO 1079 : 2000 | |
| Metallic materials - Hardness test - Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) | |
| Specifies a method of verification of testing machines for determining Rockwell superficial hardness (scales 15N, 30N, 45N, 15T, 30T and 45T) in accordance with MS ISO 1024. This standard is identical with ISO 1079 : 1989. | |
| Price Code : A | |
Mechanical testing of metals |
|
| MS ISO 156 : 1999 | |
| Metallic materials - hardness test - verification of Brinell hardness testing machines | |
| Specifies a method of verification of testing machines for determining Brinell hardness in accordance with ISO 6506. It describes a direct verification method for checking the main functions of the machine, and an indirect verification method suitable for the overall checking of the machine. | |
| Price Code : A | |
| MS ISO 376 : 2003 | |
| Metallic materials – Calibration of force–proving instruments used for the verification of uniaxial testing machines | |
| This Malaysian Standard is identical with ISO 376:1997. This Malaysian Standard covers the calibration of force-proving instruments used for the static verification of uniaxial testing machines (e.g. tension/compression testing machines) and describes a procedure for classifying these instruments. A force-proving instrument is defined as being the whole assembly from the force transducer through to and including the indicator. This Malaysian Standard generally applies to force-proving instruments in which the force is determined by measuring the elastic deformation of a loaded member or a quantity which is proportional to it. | |
| Price Code : C | |
| MS ISO 377 : 2002 | |
| Steel and steel products - Location and preparation of samples and test pieces for mechanical testing | |
| This Malaysian Standard specifies requirements for the identification, location and preparation of samples and test pieces intended for mechanical tests on steel sections, bars, rod, flat products and tubular products as defined in ISO 6929. If agreed in the order this standard may also to other metallic products. It does not apply to non-destructive tests. These samples and test pieces are for use in tests which are carried out in conformity with the methods specified in the product or material standard or, in the absence of this, in the test standard. Where the requirements of the order or product standard apply. | |
| Price Code : C | |
| MS ISO 410 : 1999 | |
| Metallic materials - hardness test - tables of Brinell hardness values for use in tests made on flat surfaces | |
| Establishes a table for calculation of Brinell hardness values for use in tests made on flat surfaces in accordance with ISO 6506. This standard is identical with ISO 410 : 1982. | |
| Price Code : B | |
| MS ISO 726 : 1999 | |
| Metallic materials - hardness test - calibration of standardized blocks to be used for Brinell hardness testing machines | |
| Specifies a method for the calibration of standardized blocks to be used in Brinell hardness testing machines, for the indirect verification of these machines as described in ISO 156. This standard is identical with ISO 726 : 1982. | |
| Price Code : A | |
| MS ISO 783 : 2002 | |
| Metallic materials - Tensile testing at elevated temperature | |
| This Malaysian Standard specifies a method of tensile testing of metallic materials at a specified temperature greater than ambient temperature and defines the mechanical properties which can be thereby determined. | |
| Price Code : D | |
| MS ISO 2566/1 : 2002 | |
| Steel and steel products - Conversion of elongation values - Part 1 : Carbon and low alloy steels | |
| This Malaysian Standard specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths. | |
| Price Code : D | |
| MS ISO 2566/2 : 2002 | |
| Steel - Conversion of elongation values - Part 2 : Austenitic steels | |
| This part of Malaysian Standard specifies a method of converting room temperature percentage elongations after fracture obtained on various proportional and non-proportional gauge lengths to other gauge lengths. | |
| Price Code : D | |
| MS ISO 3738-1 : 2001 | |
| Hardmetals - Rockwell hardness test (scale A) - Part 1 : Test method | |
| This part of MS ISO 3738 specifies the Rockwell hardness test (scale A) for hardmetals. | |
| Price Code : A | |
| MS ISO 3738-1 : 2001 | |
| Hardmetals - Rockwell hardness test (scale A) - Part 1 : Test method | |
| This part of MS ISO 3738 specifies the Rockwell hardness test (scale A) for hardmetals. | |
| Price Code : A | |
| MS ISO 3738-2 : 2001 | |
| Hardmetals - Rockwell hardness test (scale A) - Part 2 : Preparation and calibration of standard test blocks | |
| This part of MS ISO 3738 specifies the preparation and calibration of hardmetal primary standard test blocks, secondary standard test blocks and working standard test blocks from master standard standard test blocks to be used for the verification of Rockwell hardness testing machines (scale A) and indenters for testing hardmetals. | |
| Price Code : A | |
| MS ISO 6506-1 : 2003 | |
| Metallic materials - Brinell hardness test - Part 1: Test method (First revision) | |
| This Malaysian Standard is identical with ISO 6506-1:1999. This Malaysian Standard specifies a method for the Brinell hardness test for metallic materials and is applicable up to a limit of 650 HBW. This Malaysian Standard cancels and replaces MS ISO 6506:1998. | |
| Price Code : C | |
| MS ISO 6506-2 : 2003 | |
| Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (First revision) | |
| This
Malaysian Standard is identical with ISO 6506-2:1999. This Malaysian Standard specifies a method of verification and calibration of testing machines used for determining Brinell hardness test in accordance with Part 1 of this standard. It specifies a direct method for checking the main function of machine operation and an indirect method suitable for checking the overall machines operation. The indirect method may be used independently for periodic routine checking of machine operation while in service. |
|
| Price Code : B | |
| MS ISO 6506-3 : 2003 | |
| Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (First revision) | |
| Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (First revision) | |
| Price Code : B | |
| MS ISO 6507-1 : 2001 | |
| Metallic materials - Vickers hardness test - Part 1 : Test method | |
| This part of MS ISO 6507 specifies the method of Vickers hardness test for the three different ranges of test force for metallic materials. | |
| Price Code : L | |
| MS ISO 6507-2 : 2001 | |
| Metallic materials - Vickers hardness test - Part 2 : Verification of testing machines | |
| This part of MS ISO 6507 specifies a method of verification of testing machines for determining Vickers hardness in accordance with MS ISO 6507-1. It describes a direct verification for checking the main functions of the machine, and an indirect verification method suitable for the overall checking of the machine. | |
| Price Code : B | |
| MS ISO 6507-3 : 2001 | |
| Metallic materials - Vickers hardness test - Part 3 : Calibration of reference blocks. | |
| This part of MS ISO 6507 specifies a method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines, as specified in ISO 6507-2. The method is applicable only for indentations with diagonals ³ 0.020 mm. | |
| Price Code : B | |
| MS ISO 6508-1 : 2001 | |
| Metallic materials - Rockwell hardness test - Part 1 : Test method (scales A,B,C,D,E,F,G,H,K,N,T) | |
| This part of MS ISO 6508 specifies the method for Rockwell and Rockwell superficial hardness tests for metallic materials. | |
| Price Code : C | |
| MS ISO 6508-2 : 2001 | |
| Metallic materials - Rockwell hardness test - Part 2 : Verification and calibration of testing machines (scales A,B,C,D,E,F,G,H,K,N,T) | |
| This part of MS ISO 6508 specifies a method of verification of testing machines for determining Rockwell hardness (scales A,B,C,D,E,F,G,H,K,N,T). It specifies a direct method for checking the main functions of the machine and an indirect method suitable for the overall checking of the machine. The indirect method may be used on its own for periodic routine checking of the machine in service. | |
| Price Code : B | |
| MS ISO 6508-3 : 2001 | |
| Metallic materials - Rockwell hardness test - Part 3 : Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T) | |
| This part of MS ISO 6508 specifies a method for the calibration of reference blocks to be used for the indirect verification of Rockwell hardness testing machines (scales A,B,C,D,E,F,G,H,K,N,T), as specified in MS ISO 6508-2. | |
| Price Code : A | |
| MS ISO 6892 : 2002 | |
| Metallic materials - Tensile testing at ambient temperature | |
| This Malaysian Standard specifies the method for tensile testing of metallic materials and defines the mechanical properties which can be determined at ambient temperature. This standard supersedes MS 592 : 1979. | |
| Price Code : E | |
| MS ISO 7438 : 2001 | |
| Metallic materials - Bend test. | |
| This Malaysian Standard specifies the method for determining the ability of metallic materials to undergo plastic deformation in bending. This Malaysian Standard applies to the bend test of test pieces taken from metallic products as specified in the relevant product standard. | |
| Price Code : A | |
| MS ISO 7500-1 : 2003 | |
| Metallic materials – Verification of static uniaxial testing machines – Part 1: Tension/compression testing machines – Verification and calibration of the force-measuring system. | |
| This Malaysian Standard is identical with ISO 7500-1:1997. This Malaysian Standard specifies the verification of tension/compression testing machines. The verification consists of: a general inspection of the testing machine, including its accessories for the force application; and a calibration of the force-measuring system. | |
| Price Code : B | |
| MS ISO 9513 : 2003 | |
| Metallic materials – Calibration of extensometers used in uniaxial testing. | |
| This Malaysian Standard is identical with ISO 9513:1997 and its Technical Corrigendum 1:2000. This Malaysian Standard specifies a method for the static calibration of extensometers used in uniaxial testing. The term “extensometer” is understood to mean the displacement measuring device and the system for indicating or recording this displacement. | |
| Price Code : B | |
| MS ISO 15579 : 2002 | |
| Metallic materials - Tensile testing at low temperature | |
| This Malaysian Standard specifies the method of tensile testing of metallic materials at temperatures between +10 °C and -196 °C and defines the mechanical properties which can be determined. | |
| Price Code : B | |
Corrosion of metals |
|
| MS ISO 9227 : 1996 | |
| Corrosion tests in artificial atmospheres - Salt spray tests | |
| This Malaysian Standard specifies the apparatus, reagents and the procedure to be used in conducting the neutral salt spray (NSS), the acetic acid salt spray (AASS) and copper accelerated acetic acid salt spray (CASS) test for assessment of the corrosion resistance of metallic materials with or without permanent corrosion protection or temporary corrosion protection. | |
| Price Code : B | |
Ferrous metals |
|
Irons |
|
| MS 303 : 1975 | |
| Specification for foundry pig iron. | |
| Specifies materials used for five foundry grades. Chemical tests cover determination of contents for silicon, manganese, sulphur, phosphorus, carbon, arsenic and tin. | |
| Price Code : D | |
| MS 505 : 1977 | |
| Specification for iron ore (standard grade). | |
| Establishes requirements for iron ore, used mainly in production of pig iron. Appended test methods to determine contents of iron silica, alumina, phosphorus, sulphur, tin, arsenic, manganese, copper, zinc and titanium oxide. | |
| Price Code : L | |
Ferroalloys |
|
| MS ISO 3713 : 2003 | |
| Ferroalloys – Sampling and preparation of samples – General rules. | |
| This Malaysian Standard gives general rules for sampling and sample preparation of all types of ferroalloys. The methods given in this Malaysian Standard are applicable to increment sampling of consignments supplied both in bulk and in a packed form during loading or unloading, and to sampling of consignments in stationary stockpiles. This Malaysian Standard specifies the methods of both manual and mechanical sampling. It should be read in conjunction with the relevant Malaysian Standards for individual types of ferroalloys. | |
| Price Code : C | |
| MS ISO 4158 : 2003 | |
| Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method. | |
| This Malaysian Standard specifies a gravimetric method for the determination of the silicon content of ferrosilicon, ferrosilicomanganese and ferrosilicochromium. The method is applicable to alloys containing from 8 to 95 % (m/m) of silicon. | |
| Price Code : A | |
| MS ISO 4159 : 2003 | |
| Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method. | |
| This Malaysian Standard specifies a potentiometric method for the determination of the manganese content of ferromanganese and ferrosilicomanganese. The method is applicable to alloys containing from 55 to 95 % (m/m) of manganese. | |
| Price Code : A | |
| MS ISO 4552 : Part 1 : 2003 | |
| Ferroalloys – Sampling and sample preparation for chemical analysis – Part 1: Ferrochromium, ferrosilichromium, ferrosilicon, ferrosilicomanganese, ferromanganese. | |
| This part of ISO 4552 specifies the methods for sampling and sample preparation for the determination of the chemical composition of a consignment of ferrochromium, ferrosilico-chromium, ferrosilicon, ferrosilicomanganese or ferromanganese. NOTE. For purposes of sampling, ferrochromium is subdivided into non-crushable and crushable alloys. Low-carbon and certain medium-carbon ferrochromiums are non-crushable alloys; medium-carbon and high-carbon ferrochromiums are crushable alloys. Part 2 of ISO 4552 specifies the methods for use with ferrotitanium, ferromolybdenum, ferrotungsten, ferronioblum and ferrovanadium. | |
| Price Code : B | |
| MS ISO 5446 : 2003 | |
| Ferromanganese – Specification and conditions of delivery. | |
| This Malaysian Standard specifies requirements and conditions of delivery for ferromanganese usually supplied for steelmaking and foundry use. | |
| Price Code : A | |
| MS ISO 5451 : 2004 | |
| Ferrovanadium - Specification and conditions of delivery | |
| This standard specifies requirements and conditions of delivery for ferrovanadium usually supplied for steel making and foundry use. | |
| Price RM10 | |
Non-ferrous metals |
|
Aluminium and aluminium alloys |
|
| MS 907 : 1987 | |
| Method of sampling for bauxite use in the production of aluminium (First revision). | |
| This standard specifies the procedure for sampling bauxite for the determination of moisture and chemical analysis. | |
| Price Code : C | |
| MS 1007 : 1986 | |
| Methods of chemical analysis of bauxite for use in the production of aluminium. | |
| Prescribes methods for the chemical analysis of bauxite which are used in the production of aluminium. | |
| Price Code : B | |
Copper and copper alloys |
|
| MS 877 : 1984 | |
| Methods of sampling copper ores and concentrates. | |
| Determines moisture, chemical analysis, methods of manual and mechanical sampling, depending on size of ores or concentrates, uniformity of composition, grade, state of moisture content and quantity involved. | |
| Price Code : B | |
| MS 886 : 1984 | |
| Methods for the determination of moisture content and chemical analysis of copper ores and concentrates. | |
| Determines moisture content, copper, gold and silver in copper ores and concentrates. | |
| Price Code : B | |
Lead, zinc, tin and their alloys |
|
| MS 571 : 1978 | |
| Specification for ingot tin (First revision). | |
| Physical and chemical requirements for tin ingots are prescribed. Appended are methods of tests for determination of tin, lead, antimony, bismuth, cadmium, copper, arsenic, iron, sulphur, nickel, cobalt and zinc content. | |
| Price Code : A | |
| MS 965 : 1985 | |
| Specification for white metal bearing alloys. | |
| Specifies four tin-based alloys ranging from 83 percent Sn to 92 percent Sn and four lead-based alloys of 72 percent Pb to 84 percent Pb. Requirements include chemical composition, dimensions and weights. | |
| Price Code : A | |
| MS 1005 : 1986 | |
| Methods of chemical analysis of white metal bearing alloys. | |
| Prescribes methods for the chemical analysis of white metal bearing alloys. | |
| Price Code : C | |
| MS 1076 : 1987 | |
| Specification for electrolytic tinplate. | |
| Specifies single and double cold-reduced, electrolytic tinplate sheet made of low carbon mild steel. | |
| Price Code : D | |
Iron and steel products |
|
| MS 146 : 2000 | |
| Specification for hot rolled steel bars for the reinforcement of concrete (Second revision) | |
| Specifies
the requirements for hot rolled steel bars for the
reinforcement of concrete. The standard covers the
following types of hot rolled steel bars: a) Plain round steel bars in grade 250 only; and b) Deformed bars in grades 460 and 500. This standard supersedes MS 146 : 1988. |
|
| Price Code : C | |
| MS 1430 : 1998 | |
| Specification for steel library shelving | |
| This
standard specifies steel, cantilevered library shelving
units for installation in the form of bays and covers
principal dimensions, materials, finish and design. |
|
| Price Code : B | |
| MS 1462 : 1999 | |
| Specification for steel frame scaffoldings | |
| Applies to
steel frame scaffoldings used as temporary structures on
which persons work and which provide support for the
materials used in building, construction, maintenance,
repair and demolition works. |
|
| Price Code : D | |
| MS 1490 : 2001 | |
| Specification for hot rolled non-alloy structural steel sections and H-piles | |
| Specifies
the requirements for hot rolled non-alloy structural
steel sections and H-piles to be used for buildings,
piling and constructions. |
|
| Price Code : B | |
| MS 1491 : 2001 | |
| Specification for dimensions, mass and tolerances of hot rolled non-alloy structural steel sections and H-piles (First revision) | |
| Specifies the requirements and permissible variations for the dimensions, mass, tolerances, appearance and shape of hot rolled non-alloy structural steel sections and H-piles. The types of steel sections specified in this standard are equal angles, channels, joints, H-sections and H-piles. This standard is intended to be used in conjunction with MS 1490, Specification for hot-rolled non-alloy structural steel sections and H-piles. | |
| Price Code : B | |
| MS 1493 : 2000 | |
| Specification for direct reduced iron (DRI) | |
| Specifies
the requirements for the direct reduced iron (DRI)
produced through reduction process, used for steel
making. |
|
| Price Code : A | |
| MS 1494 : 2000 | |
| Specification for billets for hot rolled non-alloyed steel bars and rods | |
| Specifies
the requirements for re-rolled and continuous cast
billets used for hot rolling of steel bars and rods. |
|
| Price Code : B | |
| MS 1495 : 2000 | |
| Specification for blooms for hot rolled non-alloyed structural steel sections | |
| Specifies
the requirements for re-rolled and continuous cast blooms
used for hot rolling of non-alloyed structural steel
sections: a) H and I sections; b) H-piles; c) Channels;
and d) Angles. |
|
| Price Code : B | |
| MS 1496 : 2000 | |
| Specification for beam blanks for hot rolled non-alloyed structural steel sections | |
| Specifies
the requirements for continuous cast beam blanks for hot
rolling of non-alloyed structural steel sections: a) H
and I sections; and b) H pile. |
|
| Price Code : B | |
Steels for reinforcement of concrete |
|
| MS 144 : 2001 | |
| Specification for cold reduced mild steel wire for the reinforcement of concrete (Second revision) | |
| Specifies the requirements for plain and deformed cold reduced mild steel wires used for the reinforcement of concrete, and for the manufacture of steel fabric in accordance with MS 145. Wire that may be used for the prestressing of concrete and wire used for ties, lifting and other general engineering or industrial purposes is not included in this standard. This standard supersedes MS 144 : 1987 | |
| Price Code : B | |
| MS 145 : 2001 | |
| Specification for steel welded fabric for the reinforcement of concrete (Second revision) | |
| This Malaysian Standard sepcifies requirements for welded steel fabric manufactured from plain or deformed cold reduced mild steel wires complying with MS 144 for the reinforcement of concrete. | |
| Price Code : B | |
| MS 1138 : 1989 | |
| Specification for uncoated seven-wire stress-relieved strand for prestressed concrete. | |
| Specifies two grades (1725 and 1860) of uncoated seven-wire stress-relieved strand, of both normal and low relaxation, for use in pretensioned and post-tensioned prestressed concrete construction. The mechanical properties, method of manufacture, inspection and certification and specified also. | |
| Price Code : B | |
Flat steel products and semi-products |
|
| MS 606 : 1998 | |
| Specification for hot-dip zinc coated steel sheet and coil (First revision) | |
| Specifies requirements and test for determining coating weight of hot-dip zinc coated and crown zinc alloy coated steel sheet or coil. Also includes definitions of terms. | |
| Price Code : B | |
| MS 1196 : 2004 | |
| Continuous hot-dip aluminium/zinc-coated steel sheet of commercial drawing and structural qualities (First revision) | |
| This
Malaysian Standard specifies the characteristics of steel
of commercial, drawing and structural qualities coated by
a continuous hot-dip aluminium/zinc alloy coating
process. The aluminium/zinc alloy composition by mass is
nominally 55 % aluminium, 1.6 % silicon and the balance
zinc. The product is intended for applications where the
corrosion characteristics of aluminium coupled with those
of zinc are desired. |
|
| Price RM30 | |
| MS 1704 : Part 1 : 2003 | |
| High-yield
strength flat steel products : Part 1 : General
requirements |
|
| Price RM10 | |
| MS 1704 :Part 2 : 2003 | |
| High-yield strength flat steel products : Part 2 : Products supplied in the normalized or thermal mechanical controlled rolling | |
| Price RM10 | |
| MS 1705 : 2003 | |
| Hot-rolled
carbon steel strip and sheet of commercial and drawing
qualities |
|
| Price RM20 | |
| MS 1721 : 2003 | |
| Structural
steels – Plates, wide flats and wide strips |
|
| This
Malaysian Standard specifies qualities for the general
purpose structural steels of plates, wide flats and wide
strips. |
|
| Price RM20 | |
Steel wire, wire ropes and link chains |
|
| MS 1137 : 1989 | |
| Specification for low carbon steel wires. | |
| Specifies the requirements of (a) ordinary low carbon steel wires (b) annealed low carbon steel wires (c) galvanized low carbon steel wires (d) low carbon steel wires for nail manufacturing. Wires of nominal diameters ranging from 0.18 mm to 11.0 mm are specified. | |
| Price Code : B | |
Steel pipes and tubes for specific use |
|
| MS
ISO 3183-1 : 2003 |
|
| Petroleum and natural gas industries - Steel pipe for pipelines technical delivery conditions Part 1: Pipes of requirement class A | |
| This part of MS ISO 3183 specifies the technical delivery conditions for seamless and welded pipe of non-alloy and alloy (except stainless) steels with the basic Quality and testing requirements (level A), which are intended for the transmission and distribution of combustible and non-combustible fluids (including water) in the petroleum and natural gas industries. | |
| Price RM120 | |
| MS ISO 3183-2 : 2003 | |
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions - Part 2: Pipes of requirement class B | |
| This part of MS ISO 3183 specifies the technical delivery conditions for unalloyed and alloyed (except stainless) seamless an welded steel pipes. | |
| Price RM60 | |
| MS
ISO 3183-3 : 2003 |
|
| Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery conditions : Part 3 : Pipes of requirement class C | |
| This part of MS ISO 3183 specifies the technical delivery conditions for unalloyed and alloyed (except stainless) seamless and welded steel pipes. | |
| Price RM70 | |
Other iron and steel products |
|
| MS 924 : 1984 | |
| Specification for metal sinks for domestic purposes. | |
| Specifies requirements on materials, finish and design, construction and dimensions for metal sinks of stainless steel type A or aluminium, cast iron enamelled types A and B only. | |
| Price Code : B | |
Products and non-ferrous metals |
|
Aluminium products |
|
| MS 1196 : 1991 | |
| Specification for hot-dip zinc aluminium/zinc coated steel sheet and coil. | |
| This Malaysian Standard specifies requirements for hot-dip aluminium/zinc coated steel coil and cut lengths coated by a continuous process. | |
| Price Code : B | |
Equipment for the metallurgical industry |
|
Equipment for the metallurgical industry |
|
| MS 1463 : 1999 | |
| Specification for flake graphite (grey) cast iron | |
| Establishes specification for grey cast iron. The specification comprises six grades based on the tensile properties of test pieces machined from separately cast test samples. Where the hardness of the material in the casting is of main interest to the purchaser, reference should be made to Appendix A, which is not a mandatory part of this standard. This standard is applicable only to grey cast iron, cast in sand moulds or moulds of comparable thermal diffusivity. | |
| Price Code : B | |
| |
|