| |
|
79 |
WOOD TECHNOLOGY |
Wood technology processes |
|
| MS 652 : 1980 | |
| Specification for pentachlorophenol for use in the preservation of timber. | |
| In solid form. Specifies pentachlorophenol content, alkali insoluble matter and freezing point. Packaging and labelling requirements, methods of sampling and chemical analysis given. | |
| Price Code : A | |
| MS 733 : 1992 | |
| Specification for copper/chrome/arsenic wood preservatives (First revision). | |
| This Malaysian Standard specifies requirements for water-borne wood preservatives which consists essentially to mixtures of copper, chromium and arsenic. This specification covers the composition of the preservative, sampling procedure and methods of chemical analysis. | |
| Price Code : B | |
| MS 734 : 1981 | |
| Specification for wood preservation by means of pressure creosoting. | |
| Method consists essentially of immersing the timber completely in creosote contained in a closed vessel and subjecting it to a pressure greater than atmospheric. | |
| Price Code : B | |
| MS 758 : 2001 | |
| Glued laminated timber - Performance requirements and minimum production requirements (First revision) | |
| This standard specifies requirements for the components of glued laminated timber members and minimum requirements for the production of such members for structural use. The standard is applicable to products with a maximum finished lamination thickness of not more than 40 mm. This standard supersedes MS 758 : 1981. | |
| Price Code : D | |
| MS 837 : 1985 | |
| Method for the determination of moisture content of timber. | |
| Describes three procedures. Oven drying test, electrical moisture-meter method or Dean and Stark method. | |
| Price Code : B | |
| MS 1030 : 1986 | |
| Glossary of terms used in wood preservation. | |
| Terms relating to attack of timber by wood-destroying agencies and to processes for preservation against attack. General preservation; terms associated with preservative treatments; miscellaneous. | |
| Price Code : B | |
| MS 1043 : 1986 | |
| Method for the quantitative analysis of preservative solutions and treated timber containing pentachlorophenol and pentachlorophenol laurate. | |
| Describes procedures for the quantitative determination of pentachlorophenol (PCP) and pentachlorophenol laurate (PCPL) present in preservative solutions and treated wood. | |
| Price Code : A | |
Wood, sawlogs and sawn timber |
|
| MS 229 : 1988 | |
| Nomenclature and users of commercial timbers of Malaysia (First revision). | |
| Common and botanical names of 53 species or groups of specifies of timber exported from Malaysia are listed. | |
| Price Code : B | |
| MS 471 : Part 1 : 2001 | |
| Glossary of terms relating to timber and wood-based panel products : Part 1 : Characteristics and properties of timber (First revision) | |
| This Malaysian Standard is intended to provide uniformity in the definitions of the terms used in the Malaysian timber industry. This part deals with characteristics and properties of timber, including the stage of primary conversion but excluding the various products and processes of secondary manufacture. Structure, properties and defects of wood, both in the raw and converted states are, however, included. This standard supersedes MS 471 : 1976. | |
| Price Code : E | |
| MS 822 : 1983 | |
| Specification for sawn timber foundation piles. | |
| Specifies requirements used on land for building and civil engineering purposes. Includes timber species, quality of timber, necessary prefabrication, conditioning and preservation treatment. | |
| Price Code : B  Amendment 1 : 1984 | |
| MS 1401 : 1996 | |
| Grading rule for dressed timber, door jambs and general mouldings. | |
| This Malaysian Standard prescribes the requirements for grading of dressed timber, door jambs and general mouldings of tropical hardwood according to Premium, Standard and Utility grade. Definition of grading terms used are also provided. | |
| Price Code : D | |
Wood-based panels |
|
Plywood |
|
| MS 228 : 1991 | |
| Specification for plywood (First revision). | |
| This revised MS recognizes four types of plywood bond i.e. WBP (weather and boil proof), MR (moisture resistant), INT (interior), and CBR (cyclic boil resistant). It specifies requirements for bond performance of veneer plywood made with phenolic and aminoplastic resin adhesives. This type of resin adhesives should comply with MS 908 : 1984. | |
| Price Code : G | |
Fibre and particle boards |
|
| MS 934 : 1986 | |
| Specification for wood cement board. | |
| Applies to wood cement board produced from wood fibres chemically treated and mixed with Portland cement complying with MS 522, compressed and cured in temperature controlled conditions. | |
| Price Code : C | |
| MS 1123 : 1988 | |
| Specification for blockboard and laminboard. | |
| Gives requirements for blockboard and laminboard for general purposes manufactured from veneers and a core constructed of strips of wood. | |
| Price Code : C | |
| MS 1408 : 1997 | |
| Specification for oil palm empty fruit bunch fibre | |
| This Malaysian Standard prescribes the requirements for the inherent characteristics of oil palm fibres such as moisture content, oil content and its impurities affecting the quality of its end product quality. | |
| Price Code : B | |
| MS 1429 : 1998 | |
| Specification for medium density fibreboards (MDF) | |
| This Malaysian Standard specifies requirements for medium density fibreboard. The type of medium density fibreboard covered this in this Standard is of non-structural, non fire retardant for indoor use which is commonly used in furniture industry. Manufacturing requirements concerning permissible deviations on the size of boards and marking are specified. | |
| Price Code : E | |
Semi-manufactures of timber |
|
| MS 758 : 2001 | |
| Glued laminated timber - Performance requirements and minimum production requirements (First revision) | |
| This standard specifies requirements for the components of glued laminated timber members and minimum requirements for the production of such members for structural use. The standard is applicable to products with a maximum finished lamination thickness of not more than 40 mm. This standard supersedes MS 758 : 1981. | |
| Price Code : D | |
| MS 1036 : 1986 | |
| Specification for wood chipboard and method of test for particle board. | |
| This Malaysian Standard specifies requirements for four types of wood chipboard.This standard doe not cover requirements for extruded Particle board, flaxboard, waferboard, flakeboard or particle board other than wood chipboard. | |
| Price Code : F | |
| |
|