| |
|
85 |
PAPER TECHNOLOGY |
Paper production processes |
|
| MS 1399 : 1996 | |
| Specification for pressure sensitive adhesive paper masking tapes. | |
| This Malaysian Standard applies to pressure sensitive adhesive paper masking tapes intended for use in protecting surfaces during painting and finishing operations. | |
| Price Code : B | |
Pulps |
|
| MS 1117 : Part 1 : 1988 | |
| Method of test for pulps : Part 1 : Measurement of diffuse blue reflectance factor (ISO brightness). | |
| Specifies a method for measuring the diffuse blue reflectance factor (ISO brightness) of pulps. | |
| Price Code : A | |
| MS ISO 187 : 2001 | |
| Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | |
| This standard specifies the standard atmosphere for conditioning, and for testing pulp, paper and board, and also the procedures for measuring the temperature and relative humidity. This standard supersedes MS 8 : 1989. | |
| Price Code : B | |
| MS ISO 638 : 2002 | |
| Pulps - Determination of alkali solubility | |
| This Malaysian Standard specifies a method for the determination of the dry matter content of pulp samples. This standard supersedes MS 129 : Part 2 : 1973. | |
| Price Code : A | |
| MS ISO 692 : 2002 | |
| Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | |
| This Malaysian Standard specifies a method for the determination of the solubility of pulp in cold sodium hydroxide solutions of various and fixed concentrations. The sodium hydroxide concentrations most frequently used are 18 and 10 % (m/m). This standard supersedes MS 129 : Part 3 : 1973. | |
| Price Code : A | |
| MS ISO 699 : 2002 | |
| Pulps - Determination of alkali resistance | |
| This Malaysian Standard specifies a method for the determination of the alkali-insoluble fraction of pulps using sodium hydroxide of fixed concentration. The sodium hydroxide concentrations most frequently used are 18, 10 and 5 % (m/m). This standard supersedes MS 129 : Part 4 : 1973. | |
| Price Code : A | |
| MS ISO 776 : 2002 | |
| Pulps - Determination of acid-insoluble ash | |
| This Malaysian Standard specifies a method for the determination of the acid-insoluble ash of pulps. The method is applicable to all kinds of pulps. This standard supersedes MS 129 : Part 1 : 1973. | |
| Price Code : A | |
| MS ISO 777 : 2002 | |
| Paper, board and pulp - Determination of calcium | |
| This Malaysian Standard specifies the procedure for the determination of calcium by atomic absorption spectrometry or by plasma emission spectrometry. It is applicable to all kinds of paper, board and pulp. This standard supersedes MS 129 : Part 5 : 1973. | |
| Price Code : B | |
| MS ISO 778 : 2002 | |
| Paper, board and pulp - Determination of copper | |
| This Malaysian Standard specifies the procedure for the determination of copper by atomic absorption spectrometry or by plasma emission spectrometry. It is applicable to all kinds of paper, board and pulp. This standard supersedes MS 129 : Part 6 : 1973. | |
| Price Code : B | |
| MS ISO 779 : 2002 | |
| Paper, board and pulp - Determination of iron | |
| This Malaysian Standard specifies the procedure for the determination of iron by atomic absorption spectrometry or by plasma emission spectrometry. It is applicable to all kinds of paper, board and pulp. This standard supersedes MS 129 : Part 7 : 1973. | |
| MS ISO 2469 : 2002 | |
| Paper, board and pulps - Measurement of diffuse reflectance factor | |
| This Malaysian Standard specifies the equipment for measuring the diffuse reflectance factor of pulp, paper and board and the procedures for calibrating that equipment. | |
| Price Code : B | |
| MS ISO 3688 : 2002 | |
| Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) | |
| This Malaysian Standard specifies two procedures for the preparation of laboratory sheets prior to measuring the diffuse blue reflectance factor (ISO brightness). One is the traditional procedure based on preparation of sheets in a B?chner funnel using a filter paper or a wire screen. In the other procedure, the sheets are prepared in a standard sheet former (conventional or Rapid Köthen). | |
| Price Code : A | |
Paper and board |
|
| MS ISO 186 : 2003 | |
| Paper and board - Sampling to determine average quality. | |
| This Malaysian Standard specifies a method of obtaining a representative sample from a lot of paper or board, including solid and corrugated fibreboard (see ISO 4046), for testing to determine whether or not its average quality complies with set specifications. It defines the conditions which apply when sampling is carried out to resolve disputes between buyer and seller relating to a defined lot of paper or board, which has been or is being delivered. NOTE. 1. If less than 50 % of the lot is available for sampling, then sampling in terms of this International Standard will be invalid in the absence of agreement to the contrary. The method is unsuitable for determining the variability within a lot. In cases where Malaysian Standards make reference to sampling according to this standard but where such sampling is impossible, impractical or inappropriate, and where no dispute is involved, guidance is given in normative Annex A. NOTE. 2. Information on the preparation of test pieces is given in the appropriate Malaysian Standards. | |
| Price Code : B | |
| MS 313 : 1975 | |
| Method for ring crush test of paperboards. | |
| Measurement of the resistance of paperboard to edgewise compression : (a) to indicate edgewise rigidity of board (b) to indicate probable crushing resistance of finished paperboard container. Method is applicable to paperboards having thickness not exceeding 1.00 m. | |
| Price Code : A | |
| MS 732 : 1981 | |
| Paper, board, pulp and related terms - Vocabulary. | |
| Defines general terms, terms used in pulp manufacture, types of pulp, paper and board, paper making, types of paper and board, converted products and their properties. | |
| Price Code : D | |
| MS ISO 187 : 2001 | |
| Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | |
| This standard specifies the standard atmosphere for conditioning, and for testing pulp, paper and board, and also the procedures for measuring the temperature and relative humidity. This standard supersedes MS 8 : 1989. | |
| Price Code : B | |
| MS ISO 535 : 2001 | |
| Paper and board - Determination of water absorptiveness - Cobb method | |
| This standard specifies a method of determining the water absorptiveness of sized paper and board, including corrugated fibreboard, under standard conditions. It may not be suitable for paper of grammage less than 50 g/m2 or embossed paper.This standard supersedes MS 131 : 1973. | |
| Price Code : A | |
| MS ISO 536 : 2001 | |
| Paper and board - Determination of grammage | |
| Specifies a method of determining the grammage of paper and board. This standard supersedes MS 135 : 1992. | |
| Price Code : A | |
| MS ISO 1924-2 : 1999 | |
| Paper and board - Determination of tensile properties - Part 2 : Constant rate of elongation method | |
| Specifies a method of measuring the tensile strength, stretch at break and tensile energy absorption of paper and board using a test instrument operating at a constant rate of elongation. It also specifies methods for calculating the tensile index, the tensile energy absorption index and the modulus of elasticity. It applies to the components of corrugated board but not, however, to corrugated board itself. This standard supersedes MS 62 : 1972. | |
| Price Code : B | |
| MS ISO 1974 : 1999 | |
| Paper - Determination of tearing resistance (Elmendorf method) | |
| Specifies a method for determining the tearing resistance of paper. It can also be used for light boards if the tearing resistance is within the range of the instrument. This standard does not apply to corrugated fibreboard, but it may be applied to the components of such boards. It is not suitable for determining the cross-direction tearing resistance of highly directional paper (on board). This standard is identical with ISO 1974 : 1990 and it supersedes MS 311 : 1992. | |
| Price Code : B | |
| MS ISO 2144 : 1999 | |
| Paper, board and pulps - Determination of residue (ash) on ignition at 900°c | |
| Describes the determination of the residue on ignition of pulps, papers and boards. The standard is applicable to all types of pulp, paper and board. The lower limit of the determination is about 0.2 %. This standard is identical with ISO 2144 : 1997 and it supersedes MS 128 : 1973. | |
| Price Code : A | |
| MS ISO 2469 : 2002 | |
| Paper, board and pulps - Measurement of diffuse reflectance factor | |
| This Malaysian Standard specifies the equipment for measuring the diffuse reflectance factor of pulp, paper and board and the procedures for calibrating that equipment. | |
| Price Code : B | |
| MS ISO 2470 : 2001 | |
| Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness) | |
| Specifies a method for measuring the diffuse blue reflectance factor (ISO brightness) of pulps, papers and boards. This standard is limited in its scope to white and near-white pulps, papers and boards. This standard supersedes MS 1117 : Part 1 : 1988 | |
| Price Code : B | |
| MS ISO 2493 : 2002 | |
| Paper and board – Determination of resistance to bending | |
| This Malaysian Standard specifies a method, based on the beam principle (see ISO 5628), for determining the resistance to bending of paper and board. This Malaysian Standard applies to the measurement of the resistance to bending of paper and board, most commonly within the range 20 mN to 10 000 mN, but on some instruments down to about 2 mN. The method may also be applied to some more resistant materials. The method is applicable only to instruments which use a bending angle of 7.5º or 15º. This standard supersedes MS 312: 1975. | |
| Price Code : A | |
| MS ISO 2758 : 1999 | |
| Paper - Determination of bursting strength | |
| Specifies a method for measuring the bursting strength of paper submitted to increasing hydraulic pressure. This standard is identical with ISO 2758 - 1983. | |
| Price Code : B | |
| MS ISO 2759 : 1999 | |
| Board - Determination of bursting strength | |
| Specifies a method for measuring the bursting strength of board submitted to increasing hydraulic pressure. This standard is identical with ISO 2759 - 1983 and it supersedes MS 1266 : 1992. | |
| Price Code : B | |
| MS ISO 5626 : 1999 | |
| Paper - Determination of folding endurance | |
| Specifies the methods for the determination of folding endurance of paper using Köhler Molin, Lhomargy, MIT and Schopper testers. It sets out the conditions to be observed when using these instruments, and gives the precautions to be taken in using each instrument. This standard is identical with ISO 5626 : 1993 and it supersedes MS 314 : 1992. | |
| Price Code : B | |
| MS ISO 6587 : 1999 | |
| Paper, board and pulps - Determination of conductivity of aqueous extracts | |
| Specifies a method for the determination of the conductivity of aqueous extracts of paper, board or pulp, these extracts having been prepared by a hot or a cold method. The method is applicable to all kinds of paper, board and pulps except for papers used for electrical purposes. This standard is identical with ISO 6587 : 1992 and it supersedes MS 127 : 1973 | |
| Price Code : A | |
| MS ISO 7213 : 2001 | |
| Pulps - Sampling for testing | |
| This standard specifies a method of obtaining, for test purposes, a gross sample representative of a certain lot of pulp. This International Standard applies to all kinds of pulp delivered in bales or rolls. It is recommended for use when sampling for all kinds of testing purposes except for the determination of saleable mass. | |
| Price Code : A | |
| MS ISO 8787 : 2003 | |
| Paper and board – Determination of capillary rise – Klemm method | |
| This Malaysian Standard specifies the procedure for determining the capillary rise of paper and board by the Klemm method. | |
| Price Code : A | |
| MS ISO 8791-2 : 1999 | |
| Paper and board - Determination of roughness/smoothness (air leak methods) - Part 2 : Bendtsen method | |
| Specifies a method for the determination of the roughness of paper and board using the Bendtsen apparatus. The method is applicable to paper and board which have Bendtsen roughness values between about 50 ml/min and 1200 ml/min. It is not suitable for soft papers which allow the land to make a significant impression on the surface or for high air permeance papers which allow a significant flow of air to pass through the sheet, or for papers which will not lie flat under the heavy metal annulus. supersedes MS 753:Part:1998 and MS 753:Part 2:1988. | |
| Price Code : B | |
| MS ISO 9197 : 2001 | |
| Paper, board and pulps - Determination of water-soluble chlorides | |
| Specifies a method for the determination of water-soluble chlorides in all types of paper, board and pulp. The lower limit of the determination is 20 mg of chloride ion per kilogram of dry sample. | |
| Price Code : A | |
Paper products |
|
| MS 17 : 1986 | |
| Specification for facial tissue paper (First revision). | |
| Relates physical requirements and sheet dimensions for facial tissue paper in sheet form. An average pH value of less than 4.5 is an additional requirement. | |
| Price Code : A | |
| MS 18 : 1971 | |
| Specification for toilet tissue paper. | |
| Covers requirements for two grades of rolled toilet paper, namely grade A and grade B. Only soft crepe paper are dealt with. Dimensional requirements are also included. Test methods are given for the determination of substance, water absorbency and pH value, but not for bursting and tensile strength. | |
| Price Code : B | |
| MS 120 : 1992 | |
| Specification for envelopes (First revision). | |
| This Malaysian Standard specifies the requirements for envelopes used for mailing purpose, including window-faced envelopes. The styles and sealing of envelopes are also defined. | |
| Price Code : B | |
| MS 121 : 1986 | |
| Specification for school exercise books (First revision). | |
| Requirements given in respect of type and quality of paper and cover, style, construction, marking and values of brightness and opacity of he pages. Tests specified to determine values specified. | |
| Price Code : A | |
| MS 245 : 1974 | |
| Specification for matches. | |
| Prescribes requirements and tests for the following types of matches : (a) 'safety' wood matches in boxes (b) 'safety' wood an paper matches in hooks (width of louvers shall not exceed 83 mm). | |
| Price Code : B | |
| MS 283 : 1986 | |
| Specification for carbon paper for typewriters (First revision). | |
| Requirements which have been amended include requirements for basic paper i.e. the ranges of substances of basic paper. Other requirements still remain. | |
| Price Code : A | |
| MS 284 : 1975 | |
| Specification for carbon paper, for handwriting. | |
| Specifies two types, description, carbon work, base paper, size, resistance to curling, packing and test methods. | |
| Price Code : B | |
| MS 285 : 1975 | |
| Specification for paper (duplicating copy, liquid process). | |
| Specifies requirements and sampling for two types of white and coloured paper. | |
| Price Code : A | |
| MS 286 : 1975 | |
| Specification for kraft paper, wrapping (unbleached and untreated). | |
| Applies to two grades of kraft paper suitable for general wrapping purposes. | |
| Price Code : A | |
| MS 290 : 1975 | |
| Specification for paper (drawing and tracing). | |
| Specifies description, size, substance, formation, surface, tensile strength, packaging and methods of test for paper in rolls, reels or cut sheets. | |
| Price Code : B | |
| MS 328 : 1976 | |
| Specification for blotting paper. | |
| Specifies grades, sizes and other requirements. Used for absorbing excess ink. | |
| Price Code : A | |
| MS 329 : 1976 (1984) | |
| Specification for gummed paper tapes. | |
| Covers requirements, sampling and analytical methods for adhesion performance, and mass of adhesive. | |
| Price Code : B | |
| MS 330 : 1976 | |
| Specification for high wet-strength grease-proof paper. | |
| Describes requirements for paper suitable for wrapping of dairy products. Tests include determination of arsenic, total copper, water soluble copper and iron, lead, and detection of undesirable compounds. | |
| Price Code : E | |
| MS 331 : 1976 | |
| Specification for filter paper for use in chemical analysis. | |
| Covers two types of filter papers. Each type consists of four classes. | |
| Price Code : B | |
| MS 332 : 1992 | |
| Specification for typewriting paper (First revision). | |
| This Malaysian Standard specification describes the requirements for typewriting paper. | |
| Price Code : A | |
| MS 333 : 1976 | |
| Specification for stencil paper (Duplicating-machine, dry-process). | |
| Applies essentially to stencil paper used in producing copies on the dry-process type of duplicating machine. | |
| Price Code : B | |
| MS 1287 : 1992 | |
| Specification for exercise book paper. | |
| This Malaysian Standard specifies the requirements for paper intended for exercise books, writing pads and other similar applications. | |
| Price Code : A | |
| MS 1288 : 1992 | |
| Specification for photocopy paper. | |
| This Malaysian Standard applies to photocopy paper, or use in dry toner, plain paper photocopies. | |
| Price Code : A | |
| MS 1289 : 1992 | |
| Specification for duplicating paper for stencil duplicators. | |
| This standard applies to copy paper for use in stencil duplicating machines. | |
| Price Code : A | |
| MS 1290 : 1992 | |
| Specification for offset printing paper. | |
| This Malaysian Standard applies to printing paper intended for single and multi colour offset printing. | |
| Price Code : A | |
| |
|