|
|
|
| ________________________________________________________________________________________ |
| WITHDRAWALS (as on 26 May 2004) |
| ________________________________________________________________________________________ |
|
|
Methods of test for animal feeds and feedstuffs (First revision). |
(Superseded by MS 1410:1997, MS 1411:1997, MS 1412:1997, MS 1413:1997, MS 1414:1997, MS 1415:1997, MS 1416:1997 and MS 1448:1999). |
|
Specification for tungsten filament electric lamp for general service. |
|
Method of conditioning of samples – Paper and board (First revision). |
(Superseded by MS ISO 187:2001). |
|
Method of sampling to determine average quality of paper and board (First revision). |
|
Specification for aspirin (First revision). |
|
Methods of testing concrete : Part 4 : Methods of testing concrete for strength. |
|
Methods of testing concrete : Part 5 : Methods of testing hardened concrete for other than strength. |
|
Specification for advance warning triangle to indicate temporary obstructions. |
(Superseded by MS 1409:1997). |
|
Specification for dextrose monohydrate (pharmaceutical grade). |
|
Specification for liquid glucose (pharmaceutical grade). |
|
Specification for anhydrous dextrose (pharmaceutical grade). |
|
Specification for sucrose (pharmaceutical grade). |
|
Specification for lactose (pharmaceutical grade). |
|
Specification for benzylpenicillin. |
|
Specification for method of microbiological assays for antibiotics (First revision) |
|
Specification for chloramphenicol (First revision). |
|
Specification for phenacetin. |
|
Specification for paracetamol (First revision). |
|
Specification for codeine phosphate. |
|
Specification for caffeine and caffeine hydrate (First revision). |
|
Specification for morphine salts. |
|
Specification for magnesium sulphate, fertilizer grade |
(Superseded by MS 54 : 2001) |
|
Method for the conditioning of textiles for testing |
|
Method for determination of length of woven textile fabrics |
|
Method for the determination of width of woven textile fabrics |
|
Method for the determination of thickness of woven textile fabrics |
|
Method for the determination of weight per unit length and weight per unit area of woven textile fabrics |
|
Method for the determination of dimensional change of woven fabrics on soaking in water |
|
Method for the determination of dimensional change of woven textile fabrics subjected to laundering near the boiling point |
|
Method for the determination of the number of threads per unit length in the woven textile fabrics |
|
Method for the determination of breaking load and elongation of strips of woven textile fabrics. |
|
Method of test for the determination of tensile strength of paper and board. |
(Superseded by MS ISO 1924-2:1999). |
|
Specification for tubular fluorescent lamps for general lighting service. |
(Superseded by MS IEC 60081:1997). |
|
Specification for AC electric type fans and regulators. |
|
Specification for AC electric pedestal type fans and regulators. |
|
Specification for non-metallic conduits and fittings for electrical installations : Part 1: Rigid PVC conduits and conduit fittings |
(Superseded by MS 1534:Part1:2002, MS 1534:Part 2:Sec.1:2002) |
|
Specification for AC electric axial-flow type ventilating fans for domestic and similar uses. |
|
Specification for safety requirements for mains operated electronic and related apparatus for household and similar general use (First revision). |
(Superseded by MS IEC 60065:1997). |
|
Specification for seat belt assemblies for motorists. |
|
Specification for anchorages for seat belts |
(Superseded by M75:2002). |
|
Specification for glow starters for tubular fluorescent lamps |
|
Method of sampling fresh fruits |
|
Specification for household insecticidal spray |
|
Specification for sulphonamides. |
|
Specification for saccharin (pharmaceutical grade). |
|
Specification for laevulose (pharmaceutical grade). |
|
Specification for mannitol (pharmaceutical grade). |
|
Specification for tetracycline hydrochloride. |
|
Specification for chlortetracycline hydrochloride. |
|
Specification for oxytetracycline hydrochloride. |
|
Specification for demethylchlortetracycline hydrochloride. |
|
Specification for streptomycin sulphate. |
|
Specification for dextropropoxyphene hydrochloride. |
|
Specification for diamorphine hydrochloride. |
|
Specification for oxyphenbutazone. |
|
Specification for phenazone (antipyrin). |
|
Specification for pholcodine. |
|
Specification for glycerin (pharmaceutical grade). |
|
Specification for neomycin sulphate. |
|
Specification for paromomycin sulphate. |
|
Specification for kanamycin sulphate. |
|
Specification for vancomycin hydrochloride. |
|
Specification for pethidine hydrochloride. |
|
Specification for methadone hydrochloride. |
|
Specification for dihydrocodeine phosphate. |
|
Specification for phenylbutazone. |
|
Specification for aminophenazone (aminopyrin). |
|
Specification for tablets (First revision) |
|
Specification for capsules (First revision) |
|
Specification for motor vehicle gasoline : Part 1 : Leaded gasoline (Third revision). |
|
Specification for gloss enamel paint (First revision) |
(Superseded by MS 125:1995) |
|
Method for the sampling and testing of paper moisture content. |
(Superseded by MS ISO 287:1999). |
|
Method for the determination of pH value, conductivity, chlorides, sulphates and content of aqueous extracts of paper and board. |
(Superseded by MS ISO 6587:1999). |
|
Method for the determination of ash content of paper. |
(Superseded by MS ISO 2144:1999). |
|
Method for the determination of aid insoluble ash in pulp |
(Superseded by MS ISO 776:2002).) |
|
Method for the determination of dry matter content in pulp |
(Superseded by MS ISO 638:2002 |
|
Method for the determination of alkali solubility of pulp |
(Superseded by MS ISO 692:2002 |
|
Method for the determination of alkali resistance of pulp |
(Superseded by MS ISO 699:2002) |
|
Method for the determination of calcium content of pulp |
(Superseded by MS ISO 777:2002) |
|
Method for the determination of copper in pulp |
(Superseded by MS ISO 778:2002) |
|
Method for the determination of iron in pulp |
(Superseded by MS ISO 779:2002) |
|
Method of test for paper : Determination of bulking thickness and apparent density (First revision). |
|
Method for the determination of the water absorption of paper and boards (Cobb method) |
Superseded by MS ISO 535:2001) |
|
Method of test for paints : Part D2 : Gloss (specular reflection value) |
|
Methods of test for paints and varnishes : Part E1 : Bend test (Cylindrical mandrel) |
(Superseded by MS 133:Part E1 : 2000) |
|
Methods of test for paints and varnishes : Part E2 : Scratch test |
(Superseded by MS 133:Part E2:2000) |
|
Methods of test for paints and varnishes : Part E3 : Resistance to impact (Falling-weight test) |
(Superseded by MS 133:Part E3:2000) |
|
|
MS 133 : Part E4 : 1973 |
Methods of test for paints and varnishes : Part E4 : Cupping test |
(Superseded by MS 133:Part E4:2000) |
|
Methods of test for paints and varnishes : Part E5 : Pendulum test |
(Superseded by MS 133:Part E5:2000) |
|
Methods of test for paints and varnishes : Part E6 : Cross-cut test |
(Superseded by MS 133:Part E6:2000) |
|
Methods of test for paints and varnishes : Part E7 : Resistance to impact (Falling ball test) |
(Superseded by MS 133:Part E7:2000) |
|
Methods of test for paints : Part F2 : Resistance to humidity under condensation conditions |
(Superseded by MS 133:Part F2:2002) |
|
Method of test for paper and board : Determination of grammage (First revision) |
(Superseded by MS ISO 536:2001) |
|
Specification for AC electric table type fans and regulators. |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 1 : General : Lists out a series of procedures, and their severities, designed to assess the ability of electronic equipment using similar techniques to perform under expected conditions of service |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : General : Section 1 : Guidance for damp heat tests |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test A: Cold two methods are specified : One for electronic components and the other for electronic equipment |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test B : Dry heat two methods are specified : One for electronic components and the other for electronic equipment |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test C : Damp heat, steady state |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test D : Accelerated damp heat |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Ea : Shock |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Q : Sealing |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qa : Sealing of bushes, spindles and gaskets |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qb : Sealing of bushes, spindles and gaskets, extended test |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qc : Container sealing, gas leakage |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qd : Container sealing, seepage of filling liquid |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qe : Container sealing, penetration of liquid |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qf : Sealing immersion |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qg : Sealing, driving rain |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Qk : Container sealing, tracer gas method with mass spectrometer |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Ql : Container sealing, bomb pressure test |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test T : Soldering |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test U : Robustness of terminations |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Eb : Bump |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test F: Vibration |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Ga : Accelerated, steady state |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test H : Storage |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test J Mould growth |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Ka: Salt mist |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test M : Low air pressure |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test N : Change of temperature |
|
Specification for basic environmental testing procedures for electronic components and electronic equipment : Part 2 : Tests : Test Z/ABDM : Climatic sequence, primarily intended components |
|
Specification for cold reduced mild steel wire for the reinforcement of concrete (First revision) |
(Superseded by MS 144:2001) |
|
Specification for steel fabric for the reinforcement of concrete (First revision) |
(Superseded by MS 145:2001) |
|
Specification for hot rolled steel bars for the reinforcement of concrete (First revision) |
(Superseded by MS 146:2000) |
|
Specification for quality of vitreous china sanitary appliances |
(Superseded by MS 147:2001) |
|
Method of testing bead unseating resistance for tubeless passenger car tyres. |
(Superseded by MS 150:1999) |
|
Method of testing tyre strength for passenger car tyres. |
|
Method of testing tyre endurance for passenger car tyres. |
|
Method of testing high speed performance for passenger car tyres. |
|
Specification for liquid chlorine. |
|
Specification for ethinyloestradiol. |
|
Specification for ethynodiol diacetate. |
|
Specification for lynoestrenol. |
|
Specification for megestrol acetate. |
|
Specification for industrial safety helmets. |
(Superseded by MS 183:2001) |
|
Specification for paracetamol tablets. |
|
Specification for griseofulvin. |
|
Specification for polymyxin B sulphate. |
|
Specification for cephaloridine. |
|
Specification for nystatin. |
|
Specification for erythromycin. |
|
Specification for bacitracin. |
|
Specification for cloxacillin sodium. |
|
Specification for cloxacillin capsules. |
|
Specification for hydrocodone bitartrate. |
|
Specification for dipipanone hydrochloride. |
|
Specification for methyl salicylate. |
|
Specification for sodium salicylate. |
|
Specification for levorphenol tartrate. |
|
Specification for chlorpromazine hydrochloride. |
|
Specification for promazine hydrochloride. |
|
Specification for aspirin tablets. |
|
Specification for APC tablets (containing aspirin, phenacetin and caffeine). |
|
Specification for trifluopromazine hydrochloride. |
|
Specification for fluophenazine hydrochloride. |
|
Specification for thioridazine hydrochloride. |
|
Specification for oxyphenbutazone tablets. |
|
Specification for phenylbutazone tablets. |
|
Specification for soluble aspirin tablets. |
|
Methods for measuring and expressing the performance of television receivers. |
|
Methods for measuring and expressing the performance of radio receivers (Receivers for AM and FM sound broadcast transmission) |
|
Specification for sound system equipment : Part 1 : General |
|
Specification for sound system equipment : Part 2 : Explanation of general terms |
|
Specification for parallel screw threads of Whitworth form |
|
Specification for Specification for BA screw threads |
|
Specification for tolerances of ISO metric screw thread |
(Superseded by MS ISO 965-1:2002) |
|
Specification for ISO metric screw thread |
(Superseded by MS ISO 965-1:2002) |
|
Specification for portable fire extinguishers, water type (Gas pressure). |
(Superseded by MS 1179:1990). |
|
Specification for carbon dioxide type portable fire extinguishers (First revision). |
(Superseded by MS 1179:1990). |
|
Specification for bread and wholemeal bread. |
(Superseded by MS 241:1998) |
|
Specification for household insecticidal aerosols. |
|
Specification for amodiaquine hydrochloride. |
|
Specification for primaquine phosphate (primaquine diphosphate). |
|
Specification for mestranol. |
|
Specification for chloroquine sulphate and chloroquine phosphate (chloroquine disphosphate). |
|
Specification for pyrimethamine. |
|
Specification for norethisterone acetate. |
|
Specification for scouring powder (synthetic detergent type). |
(Superseded by MS 253:2001) |
|
Specification for prochlorperazine maleate. |
|
Specification for compound codeine tablets (containing aspirin, phenacetin and codeine). |
|
Specification for perphenazine. |
|
Specification for trifluoperazine hydrochloride. |
|
Specification for thiamine hydrochloride and thiamine mononitrate. |
|
Specification for mepacrine hydrochloride. |
|
Specification for vitamin A ester concentrate. |
|
Specification for riboflavin. |
|
Specification for riboflavin 5' - Phosphate sodium. |
|
Specification for nicotinic acid. |
|
Specification for ampicillin. |
|
Specification for methicillin sodium. |
|
Specification for phenethicillin potassium. |
|
Specification for tetracycline capsules. |
|
Specification for sulphonamide tablets. |
|
Specification for nicotinamide. |
|
Specification for natural rubber latex concentrate (Including raw natural rubber) : Part 7 : Determination of total copper content (Second revision). |
(Superseded by MS 1449:Part 3:1999). |
|
Specification for natural rubber latex concentrate (Including raw natural rubber) : Part 8 : Determination of total manganese content (Second revision). |
(Superseded by MS 1449:Part 4 :1999). |
|
Specification for natural rubber latex concentrate (Including raw natural rubber) : Part 9 : Determination of total iron content (Second revision). |
(Superseded by MS 1449:Part 5:1999). |
|
Specification for natural rubber latex concentrate : Part 12 : Determination of boric content (Second revision) |
Superseded by MS 281:Part 12:2001) |
|
Specification for natural rubber latex concentrate (including raw natural rubber) : Part 14 : Determination of total nitrogen content (Second revision) |
(Superseded by MS 281:Part 14:2001) |
|
Specification for dieldrin water-dispersible powders |
|
Specification for Malaysian black tea. |
(Superseded by MS 295:1999) |
|
Specification for centrifuged and creamed, ammonia-preserved natural rubber latices (Second revision) |
(Superseded by MS ISO 296:2001) |
|
Specification for dry-salted ikan talang (Chlorinemus sp.). |
|
Specification for dry-salted horse mackerels (Caranx sp.). |
|
Specification for dry-salted ikan kurau (threadfin). |
|
Methods of test for colour fastness of textiles : Part 1 : General. |
(Superseded by MS ISO 105-A01:1996). |
|
Methods of test for colour fastness of textiles : Part 2 : Grey scale for assessing change in colour. |
(Superseded by MS ISO 105-A02:1996). |
|
Methods of test for colour fastness of textiles : Part 3 : Grey scale for assessing staining. |
(Superseded by MS ISO 105-A03:1996). |
|
Methods of test for colour fastness of textiles : Part 4 : Colour fastness to light : Daylight. |
(Superseded by MS ISO 105-B01:1996). |
|
Methods of test for colour fastness of textiles : Part 5 : Colour fastness to artificial light : Xenon arc lamp test |
(Superseded by M SISO 105-B02:2001) |
|
Methods of test for colour fastness of textiles : Part 6 : Colour fastness to rubbing |
(Superseded by MS ISO 105-X12:2001) |
|
Methods of test for colour fastness of textiles : Part 7 : Colour fastness to rubbing with organic solvents. |
(Superseded by MS ISO 105-D02:2001) |
|
Methods of test for colour fastness of textiles : Part 8 : Colour fastness to perspiration. |
(Superseded by MS ISO 105-E04:1996). |
|
Methods of test for colour fastness of textiles : Part 9 : Colour fastness to water. |
(Superseded by MS ISO 105-E01:2001) |
|
Methods of test for colour fastness of textiles : Part 11 : Colour fastness to soda boiling |
(Superseded by MS ISO 105-X06:2002) |
|
Methods of test for colour fastness of textiles : Part 10 : Colour fastness to hot water. |
(Superseded by MS ISO 105-E08:2001) |
|
Methods of test for colour fastness of textiles : Part 12 : Colour fastness to washing : Test 1. |
(Superseded by MS ISO 105-C01:1996). |
|
Methods of test for colour fastness of textiles : Part 13 : Colour fastness to washing : Test 2. |
(Superseded by MS ISO 105-C02:1996). |
|
Methods of test for colour fastness of textiles : Part 14 : Colour fastness to washing : Test 3. |
(Superseded by MS ISO 105-C03:1996). |
|
Methods of test for colour fastness of textiles : Part 15 : Colour fastness to washing : Test 4. |
(Superseded by MS ISO 105-C04:1996). |
|
Methods of test for colour fastness of textiles : Part 16 : Colour fastness to washing : Test 5. |
(Superseded by MS ISO 105-C05:1996). |
|
Methods of test for colour fastness of textiles : Part 17 : Colour fastness to organic solvents. |
(Superseded by MS ISO 105-X05:2002) |
|
Methods of test for colour fastness of textiles : Part 19 : Colour fastness to pressing – Hot pressing |
(Superseded by MS ISO 105-X11:2002) |
|
Methods of test for colour fastness of textiles : Part 20 : Colour fastness to bleaching with hypochlorite |
(Superseded by MS ISO 105-N01:2002) |
|
Methods of test for colour fastness of textiles : Part 21 : Colour fastness to bleaching with sodium chlorite : mild |
(Superseded by MS ISO 105-N03:2002) |
|
Methods of test for colour fastness of textiles : Part 22 : Colour fastness to bleaching with sodium chlorite : Severe |
(Superseded by MS ISO 105-N04:2002) |
|
Methods of test for colour fastness of textiles : Part 23 : Colour fastness to dry heat pleating and setting |
(Superseded by MS ISO 105-P01:2002) |
|
Methods of test for colour fastness of textiles : Part 24 : Colour fastness to formaldehyde |
(Superseded by MS ISO 105-X09:2002) |
|
Methods of test for colour fastness of textiles : Part 25 : Colour fastness to vulcanizing (Open steam) |
(Superseded by MS ISO 105-S03:2002) |
|
Methods of test for colour fastness of textiles : Part 26 : Colour fastness to chlorination (Acid) |
(Superseded by MS ISO 105-X14:2002) |
|
Methods of test for colour fastness of textiles : Part 27 : Colour fastness to mercerising |
(Superseded by MS ISO 105-X04:2002) |
|
Methods of test for colour fastness of textiles : Part 28 : Colour fastness to stoving |
(Superseded by MS ISO 105-N05:2002) |
|
Methods of test for colour fastness of textiles : Part 29 : Colour fastness to sea water |
(Superseded by MS ISO 105-E02:2002) |
|
Methods of test for colour fastness of textiles : Part 30 : Colour fastness to water spotting |
(Superseded by MS ISO 105-E07:2002) |
|
Methods of test for colour fastness of textiles : Part 31 : Colour fastness to bleaching with peroxide |
(Superseded by MS ISO 105-N02:2002) |
|
Methods of test for colour fastness of textiles : Part 32 : Colour fastness to alkaline milling |
(Superseded by MS ISO 105-E12:2002) |
|
Methods of test for colour fastness of textiles : Part 33 : Colour fastness to acid-felting : Severe |
(Superseded by MS ISO 105-E13:2002) |
|
Methods of test for colour fastness of textiles : Part 34 : Colour fastness to acid-felting : Mild |
(Superseded by MS ISO 105-E14:2002) |
|
Methods of test for colour fastness of textiles : Part 35 : Colour fastness to steaming under atmospheric pressure |
(Superseded by MS ISO E11:2002) |
|
Methods of test for colour fastness of textiles : Part 36 : Colour fastness to vulcanizing with hot air |
(Superseded by MS ISO 105-S01:2002) |
|
Methods of test for colour fastness of textiles : Part 37 : Colour fastness to vulcanizing with sulfur monochloride |
(Superseded by MS ISO 105-S02:2002) |
|
Methods of test for colour fastness of textiles : Part 38 : Colour fastness to dry cleaning |
(Superseded by MS ISO 105-D01:2002) |
|
Methods of test for colour fastness of textiles : Part 39 : Assessment of migration of textile colours into polyvinyl chloride coatings |
(Superseded by MS ISO 105-X10:2002) |
|
Methods of test for colour fastness of textiles: Part 40: Method of test for detection and assessment of photochromism |
(Superseded by MS ISO 105-B05:2002) |
|
Methods of test for colour fastness of textiles : Part 41 : Colour fastness to weathering : Outdoor exposure |
(Superseded by MS ISO 105-B03:2002) |
|
Methods of test for colour fastness of textiles : Part 42 : Colour fastness to weathering : Xenon arc lamp test |
(Superseded by MS ISO 105-B04:2002) |
|
Methods of test for colour fastness of textiles : Part 43 : Colour fastness to steam pleating |
(Superseded by MS ISO 105-P02:2002) |
|
Methods of test for paper - Determination of tearing resistance (First revision). |
(Superseded by MS ISO 1974:1999). |
|
Method for the determination of stiffness of paper boards. |
(Superseded by MS ISO 2493:2002). |
|
Methods of test for paper measurement of the folding endurance of paper (First revision). |
(Superseded by MS ISO 5626:1999). |
|
Specification for eye lotions |
|
Specification for reserpine. |
|
Method for the resistance of fabric to surface-wetting (spray test). |
|
Specification for fresh, chilled and frozen poultry |
(Superseded by MS 361:2002) |
|
Specification for salicylamide. |
|
Specification for proguanil hydrochloride and chlorproguanil hydrochloride. |
|
Specification for benzylpenicillin injection. |
|
Specification for benzylpenicillin tablets. |
|
Specification for sulphinpyrazone. |
|
Specification for allopurinol. |
|
Specification for haloperidol. |
|
Specification for rescinnamine. |
|
Specification for chlordiazepoxide hydrochloride. |
|
Specification for meprobamate. |
|
Specification for injectable preparations (First revision) |
|
Specification for eye drops |
|
Specification for quinine sulphate tablets. |
|
Specification for pamaquine. |
|
Specification for solvent ether. |
|
Specification for phenazocine hydrobromide. |
|
Specification for chloroquine phosphate tablets. |
|
Specification for primaquine phosphate tablets. |
|
Specification for amodiaquine hydrochloride tablets. |
|
Specification for chloroquine phosphate injection. |
|
Specification for chloroquine sulphate injection. |
|
Specification for quinine dihydrochloride injection. |
|
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms : Part 1 : Terms common to power, telecommunications and electronics : Group 07 : Magnetism terminology. |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms : Part 1 : Terms common to power, telecommunications and electronics : Group 09 : Radio interference terminology. |
(Superseded by MS 400:Chapter 221:1996 and MS 400:Chapter 161:1996). |
|
Specification for technical DDT for insecticidal preparations. |
|
Specification for DDT water-dispersible powders. |
|
Specification for technical dieldrin, for insecticidal preparations. |
|
The analysis of fertilizers : Part 7 : Method for the determination of boron (First revision) |
(Superseded by MS 417:Part 7:2001) |
|
Code of practice for general purpose series 1 freight containers - Minimum internal dimensions (First revision). |
(Superseded by MS ISO 1496-1:1999). |
|
Specification for separators for lead acid batteries. |
|
Specification for stationary batteries. |
|
Glossary of terms relating to timber and wood work |
(Superseded by MS 471:Part 1:2001) |
|
Specification for testing and approval of household and similar appliances : Part 1 : General requirements. |
|
Specification for testing and approval of household and similar appliances: Particular requirements for ranges. |
|
Specification for testing and approval of household and similar appliances : Particular requirements for toasters, grills, waffle irons and roasters. |
|
Specification for testing and approval of household and similar appliances : Particular requirements for electric irons. |
|
Specification for testing and approval of household and similar appliances: Particular requirements for liquid heating appliances. |
|
Specification for testing and approval of household and similar appliances: Particular requirements for room air-conditioners. |
|
Methods of test for brake lining materials. |
|
Glossary of terms and symbols used in statistical quality control. |
(Superseded by MS ISO 3534-1:1999 and MS ISO 3534-2:1999). |
|
Code of practice for provisional tolerances for pesticide residues. |
|
Code of practice for hydrant systems |
|
Code for marking - Series 1 freight containers. |
(Superseded by MS 1244:1991). |
|
Specification for series 1 freight containers : Part 1 : General cargo containers for general purposes (First revision). |
(Superseded by MS ISO 1496-1:1999). |
|
Code for series 1 freight containers : Part 3 : Tank containers for liquid and gases. |
(Superseded by MS ISO 1496-3:1999). |
|
Code for series 1 freight containers : Part 4a : Platform based containers with incomplete superstructure and fixed ends |
|
Code for series 1 freight containers : Part 5 : Platform (Container). |
(Superseded by MS ISO 1496-5:2000). |
|
Code for series 1 freight containers : Specification and testing : Part 5 : Platform (Container). |
(Superseded by MS ISO 1496-5:2000). |
|
Edison screw lampholders |
|
Code of practice for the use of SI unit |
(Superseded by MS ISO 1000:2000) |
|
Code of practice for the use of SI unit |
(Superseded by MS ISO 1000:2000) |
|
Methods of obtaining textile specimens for chemical testing |
|
Methods of test for quantitative chemical analysis of binary fibre mixtures |
|
Specification for zinc oxide self adhesive plaster |
|
Specification for iron ore (Standard Grade) |
(Superseded by MS ISO 2597-1:2002, MS ISO 2598-1:2002, MS ISO 3082 : 2002, MS ISO 3084:2002, MS ISO 3086 : 2002, MS ISO 3087 ; 2002, MS ISO 3310-1:2002, MS ISO 3310-2 : 2002, MS ISO 3852:2002, MS ISO 4701:2002, MS ISO 7764:2002, MS ISO 9035:2002). |
|
Specification for portable fire extinguishers, halogenated hydrocarbon type (BCF). |
(Superseded by MS 1179:1990). |
|
Specification for toothpaste. |
|
Specification for tomato ketchup (First revision) |
(Superseded by MS 531:2001) |
|
Specification for red chilli sauce (First revision) |
(Superseded by MS 532:1995) |
|
Specification for ethyl alcohol (pharmaceutical grade). |
|
Specification for zinc oxide elastic self adhesive plaster |
|
Method of test for volatility of liquefied petroleum gases (LPG) |
(Superseded by MS 537:2001) |
|
|
|
|
Specification for vegetable seeds for planting |
(Superseded by MS 543:2001) |
|
Code of practice for the structural use of timbers |
(Superseded by MS 544:Part 1:2001, MS 544:Part 2:2001) |
|
Specification for synthetic detergent powder for household laundry |
(Superseded by MS 553:2002) |
|
Code of practice for identification marking code for freight containers. |
(Superseded by MS 1175:1989). |
|
Code of practice for series 1 freight containers - Handling and securing. |
(Superseded by MS ISO 3874:1999). |
|
Specification for motorists' seat belts with retractors. |
(Superseded by MS 1175:1989). |
|
Specification for rolled asphalt (hot process) for roads and other paved areas |
|
Method of sampling liquefied petroleum gases (LPG) |
(Superseded by MS 564:2000) |
|
Code of practice for fire fighting installations and equipment: Part 3: Portable fire extinguisher |
|
Code of practice for sampling procedures and tables for inspection by attributes : Part 1 : Establishers sampling plans and procedure for inspection by attributes |
(Superseded by MS ISO 2859-2:2000, MS ISO 2859-3:2000) |
|
Code of practice for sampling procedures and tables for inspection by attributes : Part 2 : Guide to Part 1. |
(Superseded by MS ISO 2859-2:2000, MS ISO 2859-3:2000) |
|
Code of practice for manual on basic principles on lot sampling. |
(Superseded by MS ISO 7966:2000) |
|
Code of practice for control chart techniques : Part 1 : Definitions, symbols. formulae and tables |
(Superseded by MS 7870:2000) |
|
Code of practice for control chart techniques : Part 3 : Control chart method of controlling quality during production |
(Superseded by MS ISO 7966:2000) |
|
Method of test vapour pressure of liquefied petroleum gases (LPG) method |
(Superseded by MS 573:2000) |
|
Specification for 13A, plugs, switched and unswitched socket-outlets (in metric units) (First revision) |
|
Method for tensile testing of metals |
(Superseded by MS ISO 6892:2002) |
|
Specification for safety glass for motor vehicles : Part 1 : General requirements (First revision) |
(Superseded by MS 595:Part1:2002) |
|
Specification for Cordials, Squashes and Syrups (First revision) |
(Superseded by MS 600:1998) |
|
Specification for safety boots and shoes other than all rubber types. |
(Superseded by MS 967:1985). |
|
Code of practice for precautions against fire : Part 1 : Flats and mainsonettes (in blocks over two storeys) |
|
Specification for ascorbic acid. |
|
Specification for oxytetracycline capsules. |
|
Specification for hydrochlorothiazide tablets. |
|
Specification for chloramphenicol capsules. |
|
Specification for chlorpheniramine maleate tablets. |
|
Specification for prochlorperazine tablets. |
|
Specification for flush switches |
|
Specification for switches for household and similar fixed electrical installations : Part 1 : General requirements |
(Superseded by MS 616:Part 1:1998) |
|
Specification for switches for household and similar electrical installation : Part 2 : Section 2 : Particular requirements for electromagnetic remote-control switches. |
(Superseded by MS 616:Part 2:Sec.2:2000) |
|
Specification for switches for household and similar electrical installation : Part 2 : Section 3 : Particular requirements for time delay switches. |
(Superseded by MS 616:Part 2:Sec.3:2000) |
|
Specification for electric luminaires for fluorescent lamps |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.1 : Definitions. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.2 : Classification of luminaires. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.3 : Marking. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.4 : Construction. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.5 : External and internal wiring. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.6 : Terminations. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.7 : Provision for earthing. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.8 : Protection against electric shock. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.9 : Resistance to the ingress of moisture and dust. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.10 : Insulation resistance and electric strength. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.11 : Creepage distances and clearances. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.12 : Operating temperatures and thermal endurance. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.13 : Resistance to heat, fire and tracking. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.14 : Nipples for lampholders. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 1 : General requirements and tests : Section 1.15 : Screwless terminals. |
(Superseded by MS IEC 60598-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 2 : Detail requirements : Section 2.1 : Lighting fittings for division 2 areas. |
|
Specification for electric luminaires (lighting fittings) : Part 2 : Detail requirements : Section 2.2 : General purpose luminaires. |
(Superseded by MS IEC 60598-2-1:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 2 : Detail requirements : Section 2.3 : Electric handlamps. |
(Superseded by MS IEC 60598-2-8:1998). |
|
Specification for electric luminaires (lighting fittings) : Part 2 : Detail requirements : Section 2.4 : Portable luminaires. |
(Superseded by MS IEC 60598-2-4:1997). |
|
Specification for electric luminaires (lighting fittings) : Part 2 : Detail requirements : Section 2.5 : Floodlights. |
(Superseded by MS IEC 60598-2-5:1999). |
|
Specification for electric luminaires (lighting fittings) : Part 2 : Detail requirements : Section 2.7 : Road lighting lanterns. |
(Superseded by MS IEC 60598-2-3:1997). |
|
Specification for fume cupboard. |
|
Specification for vitrified clay pipes and fittings with rigid joints (First revision). |
(Superseded by MS 1061:Part 1:1999). |
|
Specification for unplasticized PVC pipe for cold water services. |
(Superseded by MS 628:Part1:1999) |
|
Specification for a.c voltage operated earth leakage circuit breaker. |
|
Specification for resin bonded wood chipboard. |
|
Specification for dry powder type potable fire extinguisher. |
(Superseded by MS 1179:1990). |
|
|
|
|
Method of test for flash-point by the Abel apparatus |
|
Glossary of terms used in the petroleum industry : Part 1 |
(Superseded by MS ISO 1998-1:2003) |
|
Glossary of terms used in the petroleum industry : Part 2 |
(Superseded by MS ISO 1998-2:2003) |
|
Specification for reflex reflectors for vehicles, including cycles |
(Superseded by MS 654:2002) |
|
Specification for saturated bitumen felts for use mainly as roofing felts |
|
Specification for bitumen roofing felts surfaced with powdered mineral matters |
|
Specification for bitumen roofing felts surfaced with mineral granules |
|
Specification for chloroform (pharmaceutical grade). |
|
Specification for isopropyl alcohol (pharmaceutical grade). |
|
Specification for bacitracin injection. |
|
Specification for acetone (pharmaceutical grade). |
|
Specification for bridge bearing : Part 1 : Elastomer bridge bearing (First revision) |
(Superseded by MS 671:Part1:2002) |
|
Specification for materials for rubber joint rings for water supply and drainage pipelines. |
(Superseded by MS 672:1999) |
|
Specification for lead arsenate water-dispersible powders. |
|
Specification for plastic buckets |
(Superseded by MS 676:2001) |
|
Specification for class labels for dangerous goods |
(Superseded by MS 1513:Part 5:Sub-Part 2:2001) |
|
Method of test for softening point of bitumen and tar pitches (Ring-and ball apparatus) |
(Superseded by MS 687:1995) |
|
Specification for amphotericin. |
|
Specification for aluminium sulphate used for potable water supply |
(Superseded by MS 699:2002) |
|
Specification for dry-salted ikan gelama (Jewfish). |
|
Specification for dry-salted ikan merah (Lutianus sp.). |
|
Specification for ISO metric screw threads – Selected coarse and fine series for screws, bolts and nuts. |
|
Specification for canned pineapple juice |
(Superseded by MS 714:2001) |
|
|
|
|
Specification for ascorbic acid tablet. |
|
Specification for cyanocobalamin. |
|
Specification for pyridoxine hydrochloride. |
|
Specification for ergocalciferol. |
|
Specification for diazepam. |
|
Specification for diazepam tablets. |
|
Specification for diazepam capsules. |
|
Specification for undecylenic acid. |
|
Specification for Gamma BHC dispersible powders (Lindane dispersible powders). |
|
Specification for Gamma-BHC technical (Lindane Grade) for pesticidal preparations. |
|
Specification for portable fire extinguisher, foam (Chemical type). |
(Superseded by MS 1179:1990). |
|
Specification for folic acid. |
|
Specification for calcium pantothenate. |
|
Methods of test for paper and board : Part 1 : Determination of smoothness (Bekk Method). |
(Superseded by MS ISO 8791-2:1999). |
|
Methods of test for paper and board : Part 2 : Determination of roughness (Bendsten and sheffield method). |
(Superseded by MS ISO 8791-2:1999). |
|
Specification for glued laminated timber structural members |
(Superseded by MS 758:2001) |
|
Method of test for pour point of petroleum oils. |
(Superseded by MS ISO 3016:2003) |
|
Specification for liquid detergent for household hand dish washing. |
(Superseded by MS 791:2001) |
|
Specification for WC flushing cisterns(including dual flush cisterns and flush pipes) |
(Superseded by MS 795:2002) |
|
Metals - Axial load fatigue testing. |
(Superseded by MS ISO 1099:1998). |
|
Metals - Rotating bar bending fatigue testing. |
(Superseded by MS ISO 1143:1998). |
|
Steel - Torsional stress fatigue testing. |
(Superseded by MS ISO 1352:1998). |
|
Metallic materials - Hardness test - Brinell test. |
(Superseded by MS ISO 6506:1998). |
|
Steel - Charpy impact test (U-notch). |
(Superseded by MS ISO 83:1998). |
|
Pressure regulators and automatic change-over devices for liquefied petroleum gases. |
|
Method of test for palm oil and palm oil products (First revision) |
(Superseded by MS 817:Part 6:2001) |
|
Glossary of terms used in data processing : Part 11 : Control, input - Output and arithmetic equipment. |
|
Specification for information processing – Vocabulary: Part 15: Programming languages. |
|
Spark plugs for internal combustion engines |
(Superseded by MS 827:2002) |
|
Specification for ferromanganese |
|
Method of sampling ferrosilicon and ferromanganese for determination of ferrosilicon and ferromanganese for determination of chemical composition |
|
Specification for identification colour for portable fire extinguishers |
(Superseded by MS 1539:Part1:2002) |
|
Code of practice for series 1 freight containers - Classification, external dimensions and ratings. |
(Superseded by MS ISO 668:1999). |
|
Specification for inner tubes for motorised vehicles |
(Superseded by MS 868:1999) |
|
Specification for Malaysian cocoa butter |
(Superseded by MS 871:2001 |
|
Method of test for sulphur in liquefied petroleum gases (Oxy-hydrogen burner or lamp) |
(Superseded by MS 875:2001) |
|
Specification for turmeric, whole and ground |
(Superseded by MS 889:2001) |
|
Classification for bauxite for use in the production of aluminium. |
|
Specification for safety requirements of children's toys and playthings : Part 1 : General safety requirements. |
|
Specification for safety requirements of children's toys and playthings : Part 2 : Constructional requirements. |
|
Specification for safety requirements of children's toys and playthings : Part 3 : Toxicological requirements. |
|
Specification for safety requirements of children's toys and playthings : Part 4 : Flammability requirements. |
|
Specification for joints and fittings for use with unplasticized PVC pressure pipes : Part 1 : Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes. |
(Superseded by MS 628:Part 2:Sect. 2.1:1999). |
|
Specification for joints and fittings for use with unplasticized PVC pressure pipes : Part 2 : Solvent cement. |
(Superseded by MS 628:Part 2:Sect. 2.2:1999). |
|
Specification for joints and fittings for use with unplasticized PVC pressure pipes : Part 3 : Mechanical joints and fittings principally of unplasticized PVC. |
(Superseded by MS 628:Part 2:Sect. 2.1:1999). |
|
Specification for the performance of draw-off taps with metal bodies for water services : Part 1 : Dimensional and design characteristics. |
(Superseded by MS 1461:1999). |
|
Specification for the performance of draw-off taps with metal bodies for water services : Part 2 : Water tightness, pressure resistance and hydraulic characteristics. |
(Superseded by MS 1461:1999). |
|
Specification for the performance of draw-off taps with metal bodies for water services : Part 3 : Mechanical and endurance characteristics. |
(Superseded by MS 1461:1999). |
|
Specification for the performance of draw-off taps with metal bodies for water services : Part 4 : Physiochemical characteristics : Materials, coatings. |
(Superseded by MS 1461:1999). |
|
Specification for safety isolating transformers for industrial and domestic purposes. |
(Superseded by MS EN 60742:1998). |
|
Code of practice for the protection of structures against lightning. |
(Superseded by MS IEC 61024-1-1:2001, MS IEC 61024-1-2:2001, MS IEC 61662:2001, MS IEC 61024-1:2001) |
|
Methods of sampling for meat and meat products. |
(Superseded by MS 953:2001) |
|
Methods of test for meat and meat products : Part 1 : Determination of moisture content |
(Superseded by MS 954:Part 1:2000) |
|
Methods of test for meat and meat products : Part 2 : Determination of total ash |
(Superseded by MS 954:Part 2:2000) |
|
Methods of test for meat and meat products : Part 5 : Determination of free fat content |
(Superseded by MS 954:Part 5:2000) |
|
Methods of test for meat and meat products : Part 9 : Determination of hydroxyproline content |
(Superseded by MS 954:Part 9:2000) |
|
Methods of test for meat and meat products : Part 12 : Determination of chloride content (as sodium chloride) |
(Superseded by MS 954:Part 12:2000) |
|
Specification for playground equipment for parks, schools and domestic use : Part 1 : General requirements |
(Superseded by MS 966:Part 1:2001 |
|
Specification for playground equipment for parks, schools and domestic use : Part 2 : Design and construction : Safety aspects |
(Superseded by MS 966:Part 2:2001) |
|
Specification for playground equipment for parks, schools and domestic use : Part 3 : Code of practice for installation and maintenance |
(Superseded by MS 966:Part 3:2001) |
|
Specification for safety footwear. |
(Superseded by MS EN 344:1998 and MS EN 345:1998). |
|
Specification for rubber bands |
(Superseded by MS 973:2002) |
|
Specification for rubber swimming fins. |
(Superseded by MS 974:2002) |
|
Specification for KELUAR signs (Internally illuminated) |
(Superseded by MS 983:2000) |
|
Code of practice for packaging : Pictorial marking for handling of goods. |
(Superseded by MS ISO 780:2001) |
|
Code of practice for suppliers quality control systems : Part 1 : Suppliers quality control, systems : Level 1. |
(Superseded by MS ISO 9001:1994, MS ISO 9002:1994 and MS ISO 9003:1994). |
|
Code of practice for guide to suppliers quality control systems. |
(Superseded by MS ISO 9001:1994, MS ISO 9002:1994 and MS ISO 9003:1994). |
|
Code of practice for packaging - Complete, filled transport packages : Part 2 : Conditioning for testing. |
|
Code of practice for packaging : Complete, filled transport packages : Part 3 : Stacking test |
(Superseded by MS ISO 2234:2002) |
|
Code of practice for packaging : Complete, filled transport packages : Part 5 : Horizontal impact test (Inclined plane test : Pendulum test) |
(Superseded by MS ISO 2244:2002) |
|
Code of practice for packaging : Complete, filled transport packages : Part 6 : Vibration test |
(Superseded by MS ISO 2247:2002) |
|
Code of practice for packaging : Complete, filled transport packages : Part 8 : Low pressure test |
(Superseded by MS ISO 2873:2002) |
|
Code of practice for packaging : Complete, filled transport packages : Part 10 : Water spray test |
(Superseded by MS ISO 2875:2002) |
|
Specification for soya bean milk and drink |
|
Specification for ground dried chillies |
|
Specification for poly(vinyl chloride) (PVC) resins |
|
Specification for vitreous china pedestal washdown w.c. pans |
(Superseded by MS 1522:2001) |
|
Specification for vitreous china squatting washdown w.c. pans. |
(Superseded by MS 1522:2001) |
|
Specification for fresh pineapple |
(Superseded by MS 1041:2001) |
|
Specification for mosquito vapourising mat : Part 1 : Physical and chemical requirements |
(Superseded by MS 1044:Part1:2002) |
|
Specification for mosquito vapourising mat : Part 2 : Method for the evaluation of biological efficacy - Glass chamber method |
(Superseded by MS 1044:Part2:2002) |
|
Specification for polyethylene (PE) pipes for water supply (First revision). |
(Superseded by 1058:Part 1:1998) |
|
Specification for polyethylene (PE) piping systems for water supply : Part 1 : General (Second revision) |
(Superseded by MS 1058:Part1:2002, MS 1058:Part2:2002) |
|
Specification for unplasticized PVC soil and ventilating pipes, fittings and accessories |
|
Guide to modular coordination in buildings : Part 1 : Basic module |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 2 : Terminology and graphics conventions |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 3 : Principles and rules |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 4 : Sub-modular increments |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 5 : Series of preferred multimodular sizes for horizontal dimensions |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 6 : Multimodulaes for horizontal coordinating dimensions |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 7 : Modular floor plane for verticle dimensions |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 8 : Storey heights and room heights |
(Superseded by MS 1064:Part 2:2001) |
|
Guide to modular coordination in buildings : Part 9 : Coordinating sizes of doorsets (external and internal) |
(Superseded by MS 1064:Part 4:2001) |
|
Guide to modular coordination in buildings : Part 10 : Preferred dimensions for doorsets |
(Superseded by MS 1064:Part 4:2001) |
|
Guide to modular coordination in buildings : Part 11 : Reference lines of horizontal controlling coordinating dimensions |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 12 : Preferred storey heights and room heights for residential buildings |
(Superseded by MS 1064:Part 2:2001) |
|
Guide to modular coordination in buildings: Part 13: Coordinating dimensions for stairs and stair openings |
|
Guide to modular coordination in buildings : Part 14 : Fundamental principles for design of joints in buildings |
(Superseded by MS 1064:Part 1:2001) |
|
Guide to modular coordination in buildings : Part 15 : Coordinating sizes for rigid flat sheet boards used in buildings |
(Superseded by MS 1064:Part 6:2001) |
|
Specification for eye protectors for motor cyclists |
(Superseded by MS 1065:2001) |
|
Specification for rubber floor mats for vehicles |
(Superseded by MS 1068:2002) |
|
Specification for rubber radiator hoses for automotive combustion engine |
(Superseded by MS 1070:2002) |
|
Methods of test for safety and protective footwear. |
(Superseded by MS EN 344:1998 and MS EN 345:1998). |
|
|
|
|
Graphical symbols for diagrams : Part 2 : Symbols, elements, qualifying symbols and other symbols having general application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Method of test for brake fluids: Part 1: Equilibrium reflux boiling point (ERBP). |
|
Method of test for brake fluids: Part 2: Wet equilibrium reflux boiling point (Wet ERBP). |
|
Methods of test for brake fluids: Part 3: pH value. |
|
Methods of test for brake fluids: Part 4: Fluid stability. |
|
Methods of test for brake fluids: Part 5: Corrosion. |
|
Method of test for brake fluids: Part 6: Fluidity and appearance at low temperature. |
|
Method of test for brake fluids: Part 7: Evaporation. |
|
Method of test for brake fluids: Part 8: Water tolerance. |
|
Specification for dust-pressed tiles. |
|
Specification for extruded ceramic floor tiles. |
|
Method of sampling ceramic tiles |
(Superseded by MS ISO 10545-1:2002) |
|
Methods of test for ceramic tiles : Part 1 : Determination of dimensions and surface quality |
(Superseded by MS ISO 10545-2:2002) |
|
Methods of test for ceramic tiles : Part 2 : Determination of water absorption |
(Superseded by MS ISO 10545-3:2001) |
|
Methods of test for ceramic tiles: Part 3: Determination of modulus of rupture. |
|
Methods of test for ceramic tiles : Part 5 : Determination of resistance to deep abrasion of unglazed tiles. |
(Superseded by MS ISO 10545-6:2001) |
|
Methods of test for ceramic tiles : Part 6 : Determination of resistance to surface abrasion of glazed tiles. |
(Superseded by MS ISO 10545-7:2001) |
|
Methods of test for ceramic tiles : Part 7 : Determination of chemical resistance of glazed tiles. |
(Superseded by MS ISO 10545-13:2001) |
|
Methods of test for ceramic tiles : Part 9 : Determination of crazing resistance to glazed tiles |
(Superseded by MS ISO 10545-11:2001) |
|
Methods of test for ceramic tiles : Part 10 : Determination of linear thermal expansion. |
(Superseded by MS ISO 10545-8:2001) |
|
Methods of test for ceramic tiles : Part 11 : Determination of resistance to thermal shock. |
(Superseded by MS ISO 10545-9:2001) |
|
Methods of test for ceramic tiles : Part 12 : Determination of frost resistance. |
(Superseded by MS ISO 10545-12:2001) |
|
Specification for salt (NaCI) for industrial use |
(Superseded by MS 1116:2001) |
|
Specification for fresh carambola (First revision) |
(Superseded by MS 1127:2002) |
|
Specification for residual current-operated circuit-breakers. |
(Superseded by MS 1426:1997). |
|
Method of test for tensile properties of plastics film |
|
Specification for webbing for car seat belts |
(Superseded by MS 1154:2003) |
|
Methods of test for vulcanized rubber : Part A1 : Determination of hardness (Hardness between 10IRHD and 100IRHD) |
(Superseded by MS ISO 48:2002) |
|
Methods of test for vulcanized rubber : Part 2 : Determination of tension set at normal and high temperature. |
(Superseded by MS ISO 2285:1999). |
|
Methods of test for vulcanized rubber : Part 3 : Determination of tensile stress-strain properties. |
(Superseded by MS ISO 37:1998). |
|
Methods of test for vulcanized rubber : Part 4 : Accelerated ageing and heat-resistance tests. |
(Superseded by MS ISO 188:2001) |
|
Methods of test for vulcanized rubber : Part 5 : Determination of compression set under constant deflection at normal and high temperatures. |
(Superseded by MS ISO 815:1998). |
|
Method of test for vulcanized rubber : Part 6 : Determination of tear strength. |
(Superseded by MS 1567:Part 1:2002). |
|
Methods of test for vulcanized rubber : Part 7 : Preparation of samples and test pieces for physical tests. |
(Superseded by MS ISO 4661-1:1998). |
|
Methods of test for vulcanized rubber : Part 8 : Time-interval between vulcanization and testing |
(Superseded by MS 1523 : 2001) |
|
Methods of test for vulcanized rubber : Part 10 : Determination of flex cracking and crack growth (De Mattia) |
(Superseded by MS ISO 132:2002) |
|
Methods of test for vulcanized rubber : Part 13 : Standard temperatures, humidities and times for conditioning and testing of test pieces. |
(Superseded by MS 1523:2001) |
|
Methods of test for vulcanized rubber : Part 15 : Determination of permeability to gases. |
(Superseded by MS ISO 2782 : 1999). |
|
Methods of test for vulcanized rubber : Part 17 : Determination of indentation hardness by means of pocket hardness meters. |
(Superseded by MS ISO 7619 : 2000). |
|
Methods of test for vulcanized rubber : Part 20 : Determination of the effect of liquids |
(Superseded by MS ISO 1817:2002) |
|
Methods of test for vulcanized rubber : Part 21 : Determination of compression set under constant deflection at low temperatures. |
(Superseded by MS ISO 815:1998). |
|
Methods of test for vulcanized rubber : Part 32 : Determination of compressed stress relaxation (Rings). |
(Superseded by MS ISO 3384:2002) |
|
Methods of test for vulcanized rubber : Part 37 : Determination of adhesion to metal-one plate method. |
(Superseded by MS ISO 813:1986). |
|
Specification for double-deck flat pallets for through transit of goods. |
(Superseded by MS 1170:2000) |
|
Specification for pallets materials handling - Vocabulary. |
(Superseded by MS ISO 445:2000). |
|
Specification for air and air-land cargo pallets – Specification and testing. |
|
Specification for interline air cargo pallets. |
|
Specification for large pallets for through transit of goods. |
(Superseded by MS 1174:2000) |
|
Specification for portable fire extinguishers |
(Superseded by MS 1539:Part1:2002) |
|
Fire extinguishing media : Part 2 : Specification for halogenated hydrocarbons. |
|
Code of practice for access for disabled people to public buildings |
(Superseded by MS 1184:2002) |
|
Specification for aluminium stranded conductor for overhead power transmission. |
|
Specification for aluminium conductors, steel reinforced for overhead power transmission. |
|
Specification for adaptors. |
|
Code of practice for CNG compressor refuelling stations : On site storage and location of equipment (First revision). |
(Superseded by MS 1204:2001) |
|
Hose reel : Part 2 : Code of practice of maintenance. |
(Superseded by MS 1489:Part 1 : 1999). |
|
Hose reel : Part 3 : Code of practice of installations. |
(Superseded by MS 1489:Part 1 : 1999). |
|
Specification for retroreflective sign face materials. |
|
Specification for ballast for fluorescent lamps - Performance requirements. |
(Superseded by MS 141 : Part 2 : 1993).. |
|
Specification for safety requirements of electrical circulating fans and regulators |
(Superseded by MS 1219:Part2:2002) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|