MALAYSIAN STANDARDS APPROVED ON 19/01/2009
BY THE MINISTRY OF SCIENCE, TECHNOLOGY AND INNOVATION IN
ACCORDANCE
WITH THE STANDARDS OF
New Malaysian Standard
[Adapted/Indigenous]
No. |
Project No. |
Malaysian Standard Number and Title |
Remarks |
1. |
07A019R0 |
MS
1784-8:2009 GOOD AGRICULTURAL PRACTICE (GAP) - PART 8: HERBS |
This Malaysian Standard is a new standard. |
2. |
08A007R0 |
MS
2208:2009 ANIMAL FEEDING STUFFS - CODE OF PRACTICE |
This Malaysian Standard is a new standard. |
3. |
01D037R0 h |
MS
2209:2009 STRUCTURAL LAMINATED VENEER LUMBER (LVL) - PERFORMANCE REQUIREMENTS AND MINIMUM MANUFACTURING REQUIREMENTS |
This Malaysian Standard is a new standard. |
4. |
06E109R0 |
MS
2230:2009 ELECTROMAGNETIC COMPATIBILITY - ENVIRONMENT - OVERVOLTAGES ON PUBLIC ELECTRICITY DISTRIBUTION NETWORKS |
This Malaysian Standard is a new standard. |
5. |
07G023R0 |
MS
1540-2:2009 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - A FRAMEWORK FOR IT SECURITY ASSURANCE - PART 2: ASSURANCE METHODS |
This Malaysian Standard is a new standard. |
6. |
08G026R0 |
MS
2215:2009 INFORMATION TECHNOLOGY - BIOMETRIC PERFORMANCE TESTING AND REPORTING - PART 3: MODALITY-SPECIFIC TESTING |
This Malaysian Standard is a new standard. |
7. |
08G028R0 |
MS
2216:2009 INFORMATION TECHNOLOGY - BIOMETRICS - MULTIMODAL AND OTHER MULTIBIOMETRIC FUSION |
This Malaysian Standard is a new standard. |
8. |
08G029R0 |
MS
2217:2009 INFORMATION TECHNOLOGY - BIOMETRICS TUTORIAL |
This Malaysian Standard is a new standard. |
9. |
01M017R0 |
MS
1745: PART 14:2009 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 14: GUIDELINES FOR PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE |
This Malaysian Standard is a new standard. |
10. |
07R001R0 |
MS
2226:2009 MAGNETIC RESONANCE IMAGING - GUIDELINES ON SAFETY |
This Malaysian Standard is a new standard. |
11. |
07R002R0 |
MS
2227:2009 ULTRASOUND IN MEDICAL DIAGNOSTIC - CODE OF PRACTICE OF INSTALLATION, TESTING AND MAINTENANCE |
This Malaysian Standard is a new standard. |
12. |
07R017R0 |
MS
2228:2009 STRUCTURAL SHIELDING DESIGN FOR MEDICAL X-RAY IMAGING FACILITIES - GUIDELINES |
This Malaysian Standard is a new standard. |
13. |
03A058R0 |
MS
2211:2009 PLASTICS FLEXIBLE PACKAGING MATERIALS FOR PACKING OF REFINED EDIBLE OILS AND FATS SPECIFICATION |
This Malaysian Standard is a new standard. |
14. |
03A059R0 |
MS
2222:2009 PLASTIC MATERIALS AND ARTICLES INTENDED TO COME INTO CONTACT WITH FOOD |
This Malaysian Standard is a new standard. |
15. |
06Z009R0 |
MS
2225:2009 ECOLABELLING CRITERIA FOR BIODEGRADABLE CLEANING AGENTS |
This Malaysian Standard is a new standard. |
New Malaysian Standard
[Adopted/MOD/IDT]]
No. |
Project No. |
Malaysian Standard Number and Title |
Remarks |
1. |
08A002R0 |
MS
ISO 17372:2009 ANIMAL FEEDING STUFFD — DETERMINATION OF ZEARALENONE BY IMMUNOAFFINITY COLUMN CHROMATOGRAPHY AND HIGH PERFORMANCE LIQUID CHROMATOGRAPHY (ISO 17372:2008, IDT) |
This standard is identical with ISO 17372: 2008 |
2. |
08A006R0 |
MS
ISO 13906:2009 ANIMAL FEEDING STUFFS - DETERMINATION OF ACID DETERGENT FIBRE (ADF) AND ACID DETERGENT LIGNIN (ADL) CONTENTS |
This standard is identical with ISO 13906: 2008 |
3. |
**05B010R0 |
MS
1880-2:2009 SOIL QUALITY - VOCABULARY PART 2: TERMS AND DEFINITIONS RELATING TO SAMPLING (ISO 11074:2005, MOD) |
This standard corresponds to ISO 11074-2 :1998 Soil quality - Vocabulary - Part 2:Terms and definitions relating to sampling. |
4. |
08B025R0 |
MS
1850-14:2009 WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE OF ENVIRONMENTAL WATER SAMPLING AND HANDLING (ISO 5667- 14: 1998, IDT) |
This standard is identical with ISO 5667- 14: 1998 |
5. |
08B054R0 |
MS
ISO 9455-1:2009 SOFT SOLDERING FLUXES - TEST METHODS - PART 1: DETERMINATION OF NON-VOLATILE MATTER, GRAVIMETRIC METHOD (ISO 9455-1:1990, IDT) |
This standard is identical with ISO 9455-1:1990 |
6. |
08B055R0 |
MS
ISO 9455-2:2009 SOFT SOLDERING FLUXES - TEST METHODS - PART 2: DETERMINATION OF NON-VOLATILE MATTER, EBULLIOMETRIC METHOD (ISO 9455-2:1993, IDT) |
This standard is identical with ISO 9455-2:1993 Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter |
7. |
08B056R0 |
MS
ISO 9455-3:2009 SOFT SOLDERING FLUXES - TEST METHODS - PART 3: DETERMINATION OF ACID VALUE, POTENTIOMETRIC AND VISUAL TITRATION METHOD (ISO 9455-3:1992, IDT) |
This standard is identical with ISO 9455-3:1992 Soft soldering fluxes - Test methods - Part 3: Determination of acid value |
8. |
08B057R0 |
MS
ISO 9455-5:2009 SOFT SOLDERING FLUXES - TEST METHODS - PART 5: COPPER MIRROR TEST (ISO 9544-5:1992, IDT) |
This standard is identical with ISO 9455-5:1992 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (Confirmed in 2005) |
9. |
08B058R0 |
MS
ISO 9455-6:2009 SOFT SOLDERING FLUXES - TEST METHODS - PART 6: DETERMINATION AND DETECTION OF HALIDE (EXCLUDING FLUORIDE) CONTENT (ISO 9455-6:1995, IDT) |
This standard is identical with ISO 9455-6:1995 Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (Confirmed in 2005) |
10. |
07E010R0 |
MS
IEC 61194:2009 CHARACTERISCTIC PARAMETERS OF STAND-ALONE PHOTOVOLTAIC (PV) SYSTEMS (IEC 61194:1992, IDT) |
This standard is identical with IEC 61194:1992 |
11. |
**07E011R0 |
MS
62257-1:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 1: GENERAL INTRODUCTION TO RURAL ELECTRIFICATION |
This standard corresponds to IEC/TS 62257-1:2003 |
12. |
**07E012R0 |
MS
62257-2:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 2: FROM REQUIREMENTS TO A |
This standard corresponds to IEC/TS 62257-2:2004 |
13. |
**07E013R0 |
MS
62257-3:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 3: PROJECT DEVELOPMENT AND MANAGEMENT |
This standard corresponds to IEC/TS 62257-3:2004 |
14. |
**07E014R0 |
MS
62257-4:2009 RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 4: SYSTEM SELECTION AND DESIGN |
This standard corresponds to IEC/TS 62257-4:2005 |
15. |
07E017R0 |
MS
IEC 62124:2009 PHOTOVOLTAIC (PV) STAND-ALONE SYSTEMS - DESIGN VERIFICATION (IEC 62124:2004, IDT) |
This standard is identical with IEC 62124:2004 |
16. |
07F039R0 |
MS
ISO 15630-3:2009 STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL (ISO 15630-3:2002, IDT) |
This standard is identical with ISO 15630-3:2002 |
17. |
08F007R0 |
MS
ISO 6506-4:2009 METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 4: TABLE OF HARDNESS VALUES (ISO 6506-4:2005, IDT) |
This standard is identical with ISO 6506-4:2005 |
18. |
08F012R0 |
MS
ISO 4545-4:2009 METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 4: TABLE OF HARDNESS VALUES (ISO 4545-4:2005, IDT) |
This standard is identical with ISO 4545-4:2005 |
19. |
08F014R0 |
MS
2212:2009 PRODUCTION AND EVALUATION OF FIELD METALLOGRAPHIC REPLICAS - STANDARD PRACTICE |
This standard is identical with ASTM E 1351-01 |
20. |
08F015R0 |
MS
2213:2009 PREPARATION OF METALLOGRAPHIC SPECIMENTS - STANDARD GUIDE |
This standard is identical with ASTM E 3-01 |
21. |
08G016R0 |
MS
ISO 17115:2009 HEALTH INFORMATICS - VOCABULARY FOR TERMINOLOGICAL SYSTEMS (ISO 17115:2007, IDT) |
This standard is identical with ISO 17115:2007 |
22. |
08G017R0 |
MS
IEC 62304:2009 MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES (IEC 62304:2006, IDT) |
This standard is identical with IEC 62304:2006 |
23. |
08G048R0 |
MS
ISO/IEC 13818-1:2009 INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES AND ASSOCIATED AUDIO INFORMATION: SYSTEMS (ISO/IEC 13818-1:2007, IDT) |
This standard is identical with ISO/IEC 13818-1:2007 |
24. |
08G049R0 |
MS
ISO/IEC 13818-2:2009 INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES AND ASSOCIATED AUDIO INFORMATION: VIDEO (ISO/IEC 13818-2:2000, IDT) |
This standard is identical with ISO/IEC 13818-2:2000 |
25. |
08G050R0 |
MS
ISO/IEC 13818-3:2009 INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES ABD ASSOCIATED AUDIO INFORMATION - PART 3: AUDIO (ISO/IEC 13818-3:1998, IDT) |
This standard is identical with ISO/IEC 13818-3:1998 |
26. |
08G052R0 |
MS
ISO/IEC 13818-4:2009 INFORMATION TECHNOLOGY - GENERIC CODING OF MOVING PICTURES AND ASSOCIATED AUDIO INFORMATION - PART 4: CONFORMANCE TESTING (ISO/IEC 13818-4:2004, IDT) |
This standard is identical with ISO/IEC 13818-4:2004 |
27. |
07L021R0 |
MS
ISO 8092-4:2009 ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 4: PINS FOR SINGLE- AND MULTI-POLE CONNECTIONS - DIMENSIONS AND SPECIFIC REQUIREMENTS (ISO 8092-4:1997, IDT) |
This standard is identical with ISO 8092-4:1997 |
28. |
07L022R0 |
MS
ISO 13476:2009 ROAD VEHICLES - IGNITION COILS - ELECTRICAL CHARACTERISTICS AND TEST METHODS AND ITS TECHNICAL CORRIGENDUM 1 (ISO 13476:1997, IDT) |
This standard is identical with ISO 13476:1997 |
29. |
07L029R0 |
MS
ISO 8092-3:2009 ROAD VEHICLES - CONNECTIONS FOR ON-BOARD ELECTRICAL WIRING HARNESSES - PART 3: TABS FOR MULTI-POLE CONNECTIONS - DIMENSIONS AND SPECIFIC REQUIREMENTS (ISO 8092-3:1996, IDT) |
This standard is identical with ISO 8092-3:1996 |
30. |
08L008R0 |
MS
ISO 254:2009 BELT DRIVES - PULLEYS - QUALITY, FINISH AND BALANCE (ISO 254:1998, IDT) |
This standard is identical with ISO 254:1998 |
31. |
08L014R0 |
MS
ISO 9608:2009 V-BELTS - UNIFORMITY OF BELTS - TEST METHOD FOR DETERMINATION OF CENTRE DISTANCE VARIATION (ISO 9608:1994, IDT) |
This standard is identical with ISO 9608:1994 |
32. |
08L018R0 |
MS
ISO 4929:2009 ROAD VEHICLES - DIAPHRAGM GASKETS FOR HYDRAULIC BRAKE MASTER CYLINDER RESERVOIRS USING A NON-PETROLEUM BASE HYDRAULIC BRAKE FLUID (ISO 4929:1978, IDT) |
This standard is identical with ISO 4929:1978 |
33. |
08L019R0 |
MS
ISO 12161:2009 ROAD VEHICLES - ENDURANCE BRAKING SYSTEMS OF MOTOR VEHICLES AND TOWED VEHICLES - TEST PROCEDURES (ISO 12161:2006, IDT) |
This standard is identical with ISO 12161:2006 |
34. |
08N003R0 d |
MS
ISO 5771:2009 RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION (ISO 5771:2008, IDT) |
This standard is identical with ISO 5771:2008 |
35. |
08N004R0 d |
MS
ISO 6803:2009 RUBBER OR THERMOPLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2008, IDT) |
This standard is identical with ISO 6803:2008 |
36. |
07O002R0 |
MS
2223-1:2009 INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT - PART 1: GENERAL |
This standard is identical with ISO 15489-1:2001 |
37. |
07O003R0 |
MS
2223-2:2009 INFORMATION AND DOCUMENTATION - RECORDS MANAGEMENT- PART 2: GUIDELINES |
This standard is identical with ISO/TR 15489-2:2001 |
38. |
08Q023R0 |
MS
ISO 4417:2009 SIZE DESIGNATION OF CLOTHES - HEADWEAR (ISO 4417:1977, IDT) |
This standard is identical with ISO 4417:1977 |
39. |
06R095R0 |
MS
IEC 60601-2-33:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-33: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSTIC (IEC 60601-2-33:2002 AND ITS AMENDMENT 1:2005, IDT) |
This standard is identical with IEC 60601-2-33:2002 and its amendment 1:2005 |
40. |
06R096R0 |
MS
IEC 60601-2-37:2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-37: PARTICULAR REQUIREMENTS FOR THE SAFETY OF ULTRASONIC MEDICAL DIAGNOSTIC AND MONITORING EQUIPMENT (IEC 60601-2-37:2004 AND ITS AMENDMENT 2:2005, IDT) |
This standard is identical with IEC 60601-2-37:2004 and its amendment 2:2005 |
41. |
06R097R0 |
MS
IEC 62464-1:2009 MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL IMAGING - PART 1: DETERMINATION OF ESSENTIAL IMAGE QUALITY PARAMETERS (IEC 62464-1:2007, IDT) |
This standard is identical with IEC 62464-1:2007 |
42. |
07R048R0 |
MS
2218:2009 RUBBER CONDOMS - GUIDANCE ON THE USE OF MS 113 IN THE QUALITY MANAGEMENT OF NATURAL RUBBER LATEX CONDOMS (ISO 16038:2005, MOD) |
This standard corresponds to ISO 16038:2005 |
43. |
08R020R0 |
MS
ISO 18369-1:2009 OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2006, IDT) |
This standard is identical with ISO 18369-1:2006 |
44. |
08R021R0 |
MS
ISO 18369-2:2009 OPHTHALMIC OPTICS - CONTACT LENSES - PART 2: TOLERANCES (ISO 18369-2:2006, IDT) |
This standard is identical with ISO 18369-2:2006 |
45. |
08R022R0 |
MS
ISO 18369-3:2009 OPHTHALMIC OPTICS - CONTACT LENSES - PART 3: MEASUREMENT METHODS (ISO 18369-3:2006, IDT) |
This standard is identical with ISO 18369-3:2006 |
46. |
08R023R0 |
MS
ISO 18369-4:2009 OPHTHALMIC OPTICS - CONTACT LENSES - PART 4: PHYSICOCHEMICAL PROPERTIES OF CONTACT LENS MATERIALS (ISO 18369 - 4:2006, IDT) |
This standard is identical with ISO 18369-4:2006 |
47. |
08R025R0 |
MS
ISO 11979-1:2009 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 1: VOCABULARY (ISO 11979-1:2006, IDT) |
This standard is identical with ISO 11979-1 :2006 |
48. |
08R026R0 |
MS
ISO 11979-3:2009 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3 : MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2006, IDT) |
This standard is identical with ISO 11979-3: 2006 |
49. |
**07U047R0 |
MS
2229:2009 MILK POWDER : DETERMINATION OF SOY AND PEA PROTEINS USING CAPILLARY ELECTROPHORESIS IN THE PRESENCE OF SODIUM DODECYL SULFATE (SDS-CE- SCREEENING METHOD ) (ISO 17129:2006, MOD) |
This standard corresponds to ISO 17129:2006 |
50. |
08U021R0 |
MS
ISO 3063:2009 OIL OF YLANG-YLANG [CANANGA ODORATA (LAM.) HOOK. F. ET THOMSON FORMA GENUINA] (ISO 3063:2004, IDT) |
This standard is identical with ISO 3063:2004 |
51. |
08U022R0 |
MS
ISO 3215:2009 OIL OF NUTMEG INDONESIAN TYPE (MYRISTICA FRAGRANS HOUTT.) (ISO 3215:1998, IDT) |
This standard is identical with ISO 3215:1998 |
52. |
08U023R0 |
MS
ISO 9301:2009 OIL OF CUMIN SEED (CUMIMUM CYMIMUM L.) - SPECIFICATION (ISO 9301:2003, IDT) |
This standard is identical with ISO 9301:2003 |
53. |
08U024R0 |
MS
ISO 3044:2009 OIL OF EUCALYPTUS CITRIODORA HOOK. (ISO 3044:1997, IDT) |
This standard is identical with ISO 3044:1997 |
54. |
08U025R0 |
MS
ISO 3061:2009 OIL OF BLACK PEPPER (PIPER NIGRUM L.) (ISO 3061:2008, IDT) |
This standard is identical with ISO 3061:2008 |
55. |
08U027R0 |
MS
ISO 22972:2009 ESSENTIAL OILS - ANALYSIS BY GAS CHROMATOGRAPHY ON CHIRAL CAPILLARY COLUMNS - GENERAL METHOD (ISO 22972:2004, IDT) |
This standard is identical with ISO 22972:2004 |
56. |
08U029R0 |
MS
ISO 855:2009 OIL OF LEMON (CITRUS LIMON (L.) BURM. F.) (ISO 855:2003, IDT) |
This standard is identical with ISO 855:2003 |
57. |
08U030R0 |
MS
ISO 7358:2009 OILS OF BERGAMOT, LEMON, CITRON AND LIME, FULLY OR PARTIALLY REDUCED IN BERGAPTEN - DETERMINATION OF BERGAPTEN CONTENT BY HIGH-PRESSURE LIQUID CHROMATOGRAPHY (HPLC) (ISO 7358:2002, IDT) |
This standard is identical with ISO 7358:2002 |
58. |
08U031R0 |
MS
ISO 4735:2009 OILS OF CITRUS - DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROMETRIC ANALYSIS (ISO 4735:2002, IDT) |
This standard is identical with ISO 4735:2002 |
59. |
08U032R0 |
MS
ISO 7359:2009 ESSENTIAL OILS - ANALYSIS BY GAS CHROMATOGRAPHY ON PACKED COLUMNS - GENERAL METHOD (ISO 7359:1985, IDT) |
This standard is identical with ISO 7359:1985 |
60. |
08U034R0 |
MS
ISO 7609:2009 ESSENTIAL OILS - ANALYSIS BY GAS CHROMATOGRAPHY ON CAPILLARY COLUMNS - GENERAL METHOD (ISO 7609:1985, IDT) |
This standard is identical with ISO 7609:1985 |
61. |
07Z034R0 |
MS
ISO 14065:2009 GREENHOUSE GASES - REQUIREMENTS FOR GREENHOUSE GAS VALIDATION AND VERIFICATION BODIES FOR USE IN ACCREDITATION OR OTHER FORMS OF RECOGNITION (ISO 14065:2007, IDT) |
This standard is identical with ISO 14065:2007 |
62. |
08Z006R0 |
MS
2220:2009 PRACTICE FOR SAMPLING CONSOLIDATED SOLIDS IN DRUMS OR SIMILAR CONTAINERS |
This standard corresponds to ASTM D5679-95a (Reapproved 2006) |
63. |
08Z007R0 |
MS
2221:2009 PRACTICE FOR SAMPLING WASTES FROM PIPES AND OTHER POINT DISCHARGES |
This standard corresponds to ASTM D5013-89 (Reapproved 2003) |
64. |
08Z010R0 |
MS
ISO 10780:2009 STATIONARY SOURCE EMISSIONS - MEASUREMENT OF VELOCITY AND VOLUME FLOWRATE OF GAS STREAMS IN DUCTS (ISO 10780:1994 (2005), IDT) |
This standard is identical with ISO 10780:1994 (2005) |
65. |
08Z011R0 |
MS
ISO 12039:2009 STATIONARY SOURCE EMISSIONS -- DETERMINATION OF CARBON MONOXIDE, CARBON DIOXIDE AND OXYGEN - PERFORMANCE CHARACTERISTICS AND CALIBRATION OF AUTOMATED MEASURING SYSTEMS (ISO 12039:2001 (2006), IDT) |
This standard is identical with ISO 12039:2001 (2006) |
66. |
08Z013R0 |
MS
ISO 11564:2009 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF NITROGEN OXIDES - NAPHTHYLETHYLENEDIAMINE PHOTOMETRIC METHOD (ISO 11564:1998 (2004), IDT) |
This standard is identical with ISO 11564:1998 (2004) |
67. |
08Z014R0 |
MS
ISO 11632:2009 STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE - ION CHROMATOGRAPHY METHOD (ISO 11632:1998 (2004), IDT) |
This standard is identical with ISO 11632:1998 (2004) |
68. |
08Z015R0 |
MS
ISO 15713:2009 STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF GASEOUS FLUORIDE CONTENT (ISO 15713:2006, IDT) |
This standard is identical with ISO 15713:2006 |
69. |
08Z016R0 |
MS
ISO 17713:2009 METEOROLOGY - WIND MEASUREMENTS - PART 1: WIND TUNNEL TEST METHODS FOR ROTATING ANEMOMETER PERFORMANCE (MS ISO 17713-1) |
This standard is identical with ISO 17713:2007 |
70. |
08Z017R0 |
MS
ISO 17714:2009 METEOROLOGY — AIR TEMPERATURE MEASUREMENTS — TEST METHODS FOR COMPARING THE PERFORMANCE OF THERMOMETER SHIELDS/SCREENS AND DEFINING IMPORTANT CHARACTERISTICS (MS ISO 17714) |
This standard is identical with ISO 17714:2007 |
REVISED
Malaysian Standard
No. |
Project No. |
Malaysian Standard Number and Title |
Remarks |
1. |
08B039R1 |
MS
1159:2009 PENCIL - SPECIFICATION (FIRST REVISION) |
This standard is the 1st Revision of MS 1159:1989. |
2. |
07D001R1 |
MS
1135:2009 FLOAT AND POLISHED PLATE GLASSES - SPECIFICATION |
This standard is the 1st Revision of MS 1135: 1989. |
3. |
08F004R1 |
MS
ISO 6506-1:2009 METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 1: TEST METHOD (ISO 6506-1:2005, IDT) |
This
standard is the 1st Revision of MS ISO 410:1999. This standard is identical with ISO 6506-1:2005 |
4. |
08F005R1 |
MS
ISO 6506-2:2009 METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2005, IDT) |
This
standard is the 1st Revision of MS ISO 156:1999. This standard is identical with ISO 6506-2:2005 Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines |
5. |
08F006R1 |
MS
ISO 6506-3:2009 METALLIC MATERIALS -- BRINELL HARDNESS TEST -- PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6506-3:2005, IDT) |
This
standard is the 1st Revision of MS ISO 726:1999. This standard is identical with ISO 6506-3:2005 |
6. |
08F008R1 |
MS
ISO 1099:2009 METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD (ISO 1099:2006, IDT) |
This
standard is the 1st Revision of MS 1099:1975. This standard is identical with ISO 1099:2006 |
7. |
08F009R1 |
MS
ISO 4545-1:2009 METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 1: TEST METHOD (ISO 4545-1:2005, IDT) |
This
standard is the 1st Revision of MS ISO 4545:2000. This standard is identical with ISO 4545-1:2005 |
8. |
08F010R1 |
MS
ISO 4545-2:2009 METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 4545-2:2005, IDT) |
This
standard is the 1st Revision of MS ISO 4546:2000. This standard is identical with ISO 4545-2:2005 |
9. |
08F011R1 |
MS
ISO 4545-3:2009 METALLIC MATERIALS -- KNOOP HARDNESS TEST -- PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 4545-3:2005, IDT) |
This
standard is the 1st Revision of MS ISO 4547:2000. This standard is identical with ISO 4545-3:2005 |
10. |
08K001R1 |
MS
ISO 668:2009 SERIES 1 FREIGHT CONTAINERS - CLASSIFICATION, DIMENSIONS AND RATINGS (FIRST REVISION) (ISO 668:1995, AMD. 1:2005, AMD. 2:2005, IDT) |
This
standard is the 1st Revision of .MS ISO 668:1999 This standard is identical with ISO 668:1995 |
11. |
08K006R1 |
MS
ISO 1496-1:2009 SERIES 1 FREIGHT CONTAINERS - SPECIFICATION AND TESTING - PART 1: GENERAL CARGO CONTAINERS FOR GENERAL PURPOSES (FIRST REVISION) (ISO 1496-1:1990 , AMD. 1:1993, AMD. 2:1998, AMD. 3:2005, AMD. 4:2006, AMD. 5:2006, IDT) |
This
standard is the 1st Revision of MS ISO 1496-1:1999.. This standard is identical with ISO 1496-1:1990 |
12. |
08K007R1 |
MS
ISO 1496-3:2009 SERIES 1 FREIGHT CONTAINERS - SPECIFICATION AND TESTING - PART 3: TANK CONTAINERS FOR LIQUIDS, GASES AND PRESSURISED DRY BULK FIRST REVISION)(ISO 1496-3:1995, AMD. 1:2006, IDT) |
This
standard is the 1st Revision of MS ISO 1496-3. This standard is identical with ISO 1496-3 |
13. |
08L020R1 |
MS
ISO 8854:2009 ROAD VEHICLES - ALTERNATORS WITH REGULATORS - TEST METHODS AND GENERAL REQUIREMENTS (ISO 8854:1988, IDT) |
This
standard is the 1st Revision of MS 1166:1989. This standard is identical with ISO 8854:1988 |
14. |
08N012R1 d |
MS
ISO 37:2009 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION SET - PART 1: AT LOW TEMPERATURES (FIRST REVISION) (ISO 37:2005, IDT) |
This
standard is the 1st Revision of MS ISO 37:1998. This standard is identical with ISO 37:2005 |
15. |
08N013R1 d |
MS
ISO 48:2009 RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF HARDNESS (HARDNESS BETWEEN 10 IRHD AND 100 IRHD) (FIRST REVISION) (ISO 48:2007, IDT) |
This
standard is the 1st Revision of MS ISO 48:2002. This standard is identical with ISO 48:2007 |
16. |
08N014R4 d |
MS
281-3:2009 NATURAL RUBBER LATEX CONCENTRATE: PART 3: DETERMINATION OF DRY RUBBER CONTENT (FOURTH REVISION) |
This standard is the 4th Revision of MS 281: Part 3: 1998. |
17. |
07Q033R1 |
MS
1747-1:2009 TEXTILES - MALAYSIAN WOVEN FABRIC - PART 1: MALAYSIAN SONGKET (FIRST REVISION) |
This standard is the 1st Revision of MS 1747: Bahagian 2:2004. |
18. |
08Q024R1 |
MS
ISO 3759:2009 TEXTILES - PREPARATION, MARKING AND MEASURING OF FABRIC SPECIMENS AND GARMENTS IN TESTS FOR DETERMINATION OF DIMENSIONAL CHANGE (FIRST REVISION) (ISO 3759:2007, IDT) |
This
standard is the 1st Revision of MS ISO 3759:1995. This standard is identical with ISO 3759:2007 |
19. |
07R050R1 |
MS
ISO 11607-1:2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (FIRST REVISION) (ISO 11607-1:2006, IDT) |
This
standard is the 1st Revision of MS 1927:2006 all parts. This standard is identical with ISO 11607-1: 2006 |
20. |
07R051R1 |
MS
ISO 11607-2:2009 PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (FIRST REVISION) (ISO 11607-2:2006, IDT) |
This
standard is the 1st Revision of MS 1927:2006 all parts. This standard is identical with ISO 11607-2:2006 |
21. |
07R052R1 |
MS
ISO 1135-4:2009 TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE (FIRST REVISION) (ISO 1135-4:2004, IDT) |
This
standard is the 1st Revision of MS 1099:1987. This standard is identical with ISO 1135-4:2004 |
22. |
07R053R1 |
MS
ISO 8536-4:2009 INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (FIRST REVISION) (ISO 8536-4:2007, IDT) |
This
standard is the 1st Revision of MS 1099:1987. This standard is identical with ISO 8536-4:2007 |
23. |
04A022R2 |
MS
513:2009 CARAMEL IN THE MANUFACTURE OF SOYA SAUCE - SPECIFICATION (SECOND REVISION) |
This standard is the 2nd Revision of 513. |
24. |
07U049R1 |
MS
1514:2009 GOOD MANUFACTURING PRACTICE FOR FOOD (FIRST REVISION) |
This standard is the 1st Revision of MS 1514. |
25. |
08U039R1 |
MS
997:2009 CANNED BAKED BEANS IN TOMATO SAUCE - SPECIFICATION (FIRST REVISION) |
This standard is the 1st Revision of MS 997:1986. |
26. |
08Y003R1 |
MS
ISO 9001:2009 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (FIRST REVISION) (ISO 9001:2008, IDT) |
This
standard is the 1st Revision of MS ISO 9001:2000. This standard is identical with ISO 9001:2008 |
WITHDRAWN
Malaysian Standard
No. |
Project No. |
Malaysian Standard Number and Title |
New MS (Replaced by) |
||
| 1. |
MS
1165:1999 |
Specification
for pressure regulators and automatic changeover devices
for liquefied petroleum gas (First revision |
MS
1165:2008, Pressure regulators and automatic changeover
devices for liquefied petroleum gas - Specification (Second revision) ISC F (15/10/2008) |
||
| 2. |
MS
1525:2001 |
Code
of practice on energy efficiency and use of renewable
energy for non-residential buildings |
MS
1525:2007, Code of practice on energy efficiency and use
of renewable energy for non-residential buildings (First revision) ISC F (15/10/2008) |
||
| 3. |
MS
IEC 61000-3-8:2001 |
Electromagnetic
compatibility (EMC) – Part 3: Limits – Section
8: Signalling on low-voltage electrical frequency bands
and electromagnetic levels |
MS
IEC 61000-3-8:2007 Electromagnetic
compatibility (EMC) – Part 3: Limits – Section
8: Signalling on low-voltage electrical frequency bands
and electromagnetic levels ISC E (12/11/2008) |
||
| 4. |
MS
1036 : 1986 |
Specification
for wood chipboard and method of test for particle board |
MS
1036:2006, Wood-based panels - Particleboards -
Specification (First revision) ISC D (21/10/2008) |
||
| 5. |
MS
1402 : 1996 |
Code
of practice for sanitary system in buildings |
MS
1402:Part 1:2006, Code of practice for sanitary system in
buildings – Part 1: Design (First revision) MS 1402: Part 2:2006, Code of
practice for sanitary system in buildings – Part 2:
Installation (First revision) MS 1402: Part 3:2006, Code of
practice for sanitary system in buildings – Part 3:
Testing and commissioning (First revision) MS 1402: Part 4:2006, Code of
practice for sanitary system in buildings – Part 4:
Operation and Maintenance (First revision) ISC D (21/10/2008) |
||
| 6. |
MS
976 : 1985 |
Specification
for toilet seats of moulded plastics |
MS
976 : 2004, WC seats (plastics) - Specification
(First revision) ISC D (21/10/2008) |
||
| 7. |
MS
1042:1986 |
Code
of practice for safety in laboratories - Part 1: General. |
MS
1042:2007 Code of practice for safety in laboratories -
Part 1: General. ISC W (23/10/2008) |
||
| 8. |
MS
1454:1999 |
Specification
for liquid polyaluminium chloride for potable water
treatment |
MS
1454:2007, Liquid polyaluminium chloride for use in
potable water supply – Specification (First
revision) ISC B (09/10/2008) |
||
| 9. |
MS
1455:1999 |
Methods
of analysis for polyaluminium-based coagulants |
|||
| 10. |
MS
1457:1999 |
Guidelines
for the application of liquid polyaluminium-based
coagulants in potable water treatment |
|||
11. |
MS
ISO 2285:2005 |
Rubber,
vulcanized or thermoplastic – Determination of
tension set under constant elongation, and of tension
set, elongation and creep under constant tensile load
(First revision) |
MS
ISO 2285:2007, Rubber, vulcanized or
thermoplastic – Determination of tension set under
constant elongation, and of tension set, elongation and
creep under constant tensile load (Second revision) ISC N (10/11/2008) |
12. |
MS
ISO 2782:1999 |
Rubber,
vulcanized or thermoplastic – Determination of
permeability to gases |
MS
ISO 2782:2007, Rubber, vulcanized or
thermoplastic – Determination of permeability to
gases (First revision) ISC N (10/11/2008) |
13. |
MS
ISO 8331:2004 |
Rubber
and plastics hoses and hose assemblies – Guidelines
for selection, storage, use and maintenance |
MS
ISO 8331:2007, Rubber and plastics hoses and hose
assemblies – Guidelines for selection, storage, use
and maintenance (First revision) ISC N
(10/11/2008) |
14. |
MS
ISO 3865:1999 |
Rubber,
vulcanized or thermoplastic - Methods of test for
staining in contact with organic material |
MS
ISO 3865:2008, Rubber, vulcanized or
thermoplastic - Methods of test for staining in contact
with organic material (First revision) ISC N (10/11/2008) |
15. |
MS
ISO 8330:2002 |
Rubber
and thermoplastic hoses and hose assemblies - Vocabulary |
MS
ISO 8330:2008, Rubber and
thermoplastic hoses and hose assemblies - Vocabulary
(First revision) ISC N (10/11/2008) |
16. |
MS
1157: Part 16: 1992 |
Methods
of test for vulcanized rubber: Part 16: Resistance to
ozone cracking – Static strain test |
MS
ISO 1431-1, Rubber, vulcanized or thermoplastic -
Resistance to ozone cracking - Part 1: Static and dynamic
strain testing (First revision) ISC N
(10/11/2008) |
17. |
MS
1157: Part 18: 1992 |
Methods
of test for vulcanized rubber: Part 18: Determination of
modulus in shear - Quadruple shear methods, |
MS
ISO 1827, Rubber, vulcanized or thermoplastic -
Determination of shear modulus and adhesion to rigid
plates - Quadruple shear methods (First revision) ISC N
(10/11/2008) |
18. |
MS
1157:Part 19: 1992 |
Methods
of test for vulcanized rubber: Part 19: Determination of
adhesion to rigid plates in shear - Quadruple shear
methods |
MS
ISO 1827, Rubber, vulcanized or thermoplastic -
Determination of shear modulus and adhesion to rigid
plates - Quadruple shear methods (First revision) ISC N
(10/11/2008) |
19. |
MS
1157: Part 31: 1992 |
Methods
of test for vulcanized rubber: Part 31: Determination of
adhesion to wire cord |
MS
ISO 5603, Rubber, vulcanized – Determination of
adhesion to wire cord (First revision) ISC N
(10/11/2008) |
20. |
MS
ISO 188:2001 |
Rubber,
vulcanized or thermoplastic - Accelerated ageing and heat
resistance tests |
MS
ISO 188, Rubber, vulcanized or thermoplastic -
Accelerated ageing and heat resistance tests (First
revision) ISC N
(10/11/2008) |
| 21. |
MS
ISO 14040:1998 |
Environmental
management- Life cycle assessment- Principles and
framework |
MS
14040:2008, Environmental
management- Life cycle assessment- Principles and
framework (First revision) and MS ISO 14044:2008, Environmental
management- Life cycle assessment- Requirements and
guidelines ISC Z (14/08/2008) |
| 22. |
MS
ISO 14041:2000 |
Environmental
management – Life cycle assessment – Goal and
scope definition and inventory analysis |
|
| 23. |
MS
ISO 14042:2001 |
Environmental
management – Life cycle assessment – Life cycle
impact assessment |
|
| 24. |
MS
ISO 14043:2001 |
Environmental
management – Life cycle assessment – Life cycle
interpretation |
|
25. |
MS
252: Part 34:1994, |
Animal
and vegetable fats and oils : Part 34: Determination of
polymerized triglycerides by gel-permeation high
performance liquid chromatography |
Replaced: ISC U (21/11/2008) |
26. |
MS
252: Part 35:1994 |
Animal
and vegetable fats and oils : Part 35: Determination of
polar compounds content |
|
27. |
MS
252: Part 33:1994 |
Animal
and vegetable fats and oils : Part 33: Determination of
cold stability |
|
28. |
MS
252: Part 21:1994 |
Animal
and vegetable fats and oils : Part 21: Rapid method for
the preparation of methyl esters of fatty acids |
|
29. |
MS
252: Part 22:1994 |
Animal
and vegetable fats and oils : Part 22: Determination of
fatty acid methyl esters by gas-liquid chromatography |
|
30. |
MS
252: Part 23:1994, |
Animal
and vegetable fats and oils : Part 23: Detection and
identification of antioxidants - Liquid chromatographic
method |
|
31. |
MS
252: Part 24:1994, |
Animal
and vegetable fats and oils : Part 24: Determination of tocopherols
and tocotrienols in vegetable oils and fats by high
performance liquid chromatographic method |
|
32. |
MS
252: Part 25:1994 |
Animal
and vegetable fats and oils : Part 25: Determination of gallates
contents - Molecular absorption spectrometric method |
|
33. |
MS
252: Part 26:1994, |
Animal
and vegetable fats and oils : Part 26: Determination of
composition of the sterol fraction - Method using gas
chromatography |
|
34. |
MS
252: Part 27:1994 |
Animal
and vegetable fats and oils : Part 27: Determination of
solid fat content - Pulsed nuclear magnetic resonance
method |
|
35. |
MS
252: Part 30:1994 |
Animal
and vegetable fats and oils : Part 30: Determination of
1-monoglycerides and free glycerol content |
|
36 |
MS
252: Part 19:1994 |
Animal
and vegetable fats and oils : Part 19: Determination of
water content - Entrainment method. |
|
37. |
MS
252: Part 20:1994 |
Animal
and vegetable fats and oils : Part 20: Determination of
specific extinction in ultra-violet light. |