NEWLY PUBLISHED MALAYSIAN STANDARDS - APRIL 2008
03. Sociology. Services. Company
organization and management. Administration. Transport
MS ISO 14819-2 : 2005 -
Traffic and traveller information (TTI) - TTI messages via
traffic message coding - Part 2 : Event and information codes for
radio data system - Traffic message channel (RDS-TMC) (RM460) (ICS
03.220.20 / 35.240.60)
13. Environment. Health protection. Safety
MS 1850 : Part 9 : 2006 -
Water quality - Sampling - Part 9 : Guidance on sampling from
marine waters (RM120) (ICS 13.060.45)
MS IEC 60695-2-12 : 2007
- Fire hazard testing - Part 2-12 : Glowing / hot-wire based test
methods - Glow-wire flammability test method for materials (RM90)
(ICS 13.220 / 29.020)
MS IEC 60695-2-13 : 2007 - Fire hazard testing - Part 2-13 :
Glowing / hot-wire based test methods - Glow-wire ignitability
test method for materials (RM90) (ICS 13.220 / 29.020)
MS ISO 11064-4 : 2007 - Ergonomic design of control centres :
Part 4 : Layout and dimensions of workstations (RM260) (ICS
13.180)
MS ISO 13406-1 : 2007 -
Ergonomic requirements for work with visual display based on flat
panels - Part 1 : Introduction (RM90) (ICS 13.180)
MS ISO 13406-2 : 2007 -
Ergonomic requirements for work with visual display based on flat
panels - Part 2 : Ergonomic requirements for flat panel displays
(RM460) (ICS 13.180)
MS ISO/TS 20646-1 : 2007
- Ergonomic procedures for the improvement of load muscular
workloads - Part 1 : Guidelines for reducing local muscular
workloads (RM190) (ICS 13.180)
19. Testing
MS IEC 60068-2-10 : 2007 - Environmental testing -
Part 2-10 : Tests - Test J and guidance : Mould growth (RM330) (ICS
19.040)
MS IEC 60068-2-20 : 2007 - Environmental
testing - Part 2-20 : Tests - Test T : Soldering (RM290) (ICS
19.040)
25. Manufacturing Engineering
MS ISO 2560 : 2007 -
Welding consumables - Covered electrodes for manual metal arc
welding of non alloy and fine grain steels - Classification
(RM240)
(ICS 25.160.20)
MS ISO 3580 : 2007 - Welding consumables - Covered electrodes for
manual metal arc welding of creep - Resisting steels -
Classification (RM220) (ICS 25.160.20)
MS ISO 3581 : 2007 - Welding consumables - Covered electrodes for
manual metal arc welding of stainless and heat-resisting steels -
Classification (RM220)
(ICS 25.160.20)
MS ISO 14172 : 2007 - Welding consumables - Covered electrodes
for manual metal arc welding of nickel and nickel alloys -
Classification (RM180) (ICS 25.160.20)
27. Energy and Heat Transfer Engineering
MS IEC 60335-2-104 : 2007
- Household and similar electrical appliances - Safety - Part
2-104 : Particular requirements for appliances to recover and/or
recycle refrigerant from air conditioning and refrigeration
equipment (RM410) (ICS 27.200 / 71.100.45)
29. Electrical Engineering
MS IEC 60034-16-1 : 2007
- Rotating electrical machines - Part 16 : Excitation systems for
synchronous machines - Chapter 1 : Definitions (RM120) (ICS
29.160)
MS IEC/TS 60034-16-2 : 2007 - Rotating electrical machines - Part
16 : Excitation systems for synchronous machines - Chapter 2 :
Models for power system studies (RM230) (ICS 29.160)
MS IEC 60034-18-1 : 2007 - Rotating electrical machines - Part 18
: Functional evaluation of insulation systems - Test procdures
for form-wound windings - Evaluation of thermomechanical
endurance of insulation systems (RM200) (ICS 29.080.01 /
29.100.01)
MS IEC/TS 60034-18-34 : 2007 - Rotating electrical machines -
Part 18-34 : Functional evaluation of insulation systems -
Section 1 : General guidelines (RM250) (ICS 29.160.01 /
29.080.01)
MS IEC 60061-1 : 2005 - Lamp caps and holders together with
gauges for the control of interchangeability and safety - Part 1
: Lamp caps (RM500) (ICS 29.140.10)
MS IEC 60470 : 2007 - High-voltage alternating current contactors
and contactors-based motor-straters (RM570) (ICS 29.130.10)
MS IEC 60695-2-12 : 2007 - Fire hazard testing - Part 2-12 :
Glowing / hot-wire based test methods - Glow-wire flammability
test method for materials (RM90) (ICS 13.220 / 29.020)
MS IEC 60695-2-13 : 2007 - Fire hazard testing - Part 2-13 :
Glowing / hot-wire based test methods - Glow-wire ignitability
test method for materials (RM90) (ICS 13.220 / 29.020)
MS IEC 60695-10-2 : 2007 - Fire hazard testing - Part 10-2 :
Abnormal heat - Ball pressure test (RM140) (ICS 29.020)
MS IEC 61558-2-9 : 2007 -
Safety of power transformers, power supply units and similar
products - Part 2-9 : Particular requirements for transformers
for class III handlamps for tungsten filament lamps (RM160) (ICS
29.180)
MS IEC 61558-2-12 : 2007
- Safety of power transformers, power supply units and similar
devices - Part 2-12 : Particular requirements for constant
voltage transformers (RM230) (ICS 29.180)
MS IEC 61558 : Part 2-13
: 2007 - Safety of power transformers, power supply units and
similar devices - Part 2-13 : Particular requirements for
auto-transformers for general use (RM140) (ICS 29.180)
MS IEC 61558-2-20 : 2007
- Safety of power transformers, power supply units and similar
devices - Part 2-20 : Particular requirements for small reactors
(RM180) (ICS 29.180)
MS IEC 61558-2-23 : 2007
- Safety of power transformers, power supply units and similar
devices - Part 2-23 : Particular requirements for transformers
for construction sites (RM230) (ICS 29.180)
MS IEC 62271-102 : 2007 -
High-voltage switchgear and controlgear - Part 102 : Alternating
current disconnectors and earthing switches (RM460) (ICS
29.130.10 / 29.130.99)
33. Telecommunications. Audio and Video Engineering
MS IEC 60966-3-2 : 2007 -
Radio frequncy and coaxial cable assemblies - Part 3-2 : Detail
specification for semi-flexible coaxial cable assemblies for GSM
use (0.8 Ghz - 1 Ghz) (First revision) (RM110) (ICS
33.120.10)
35. Information Technology. Office Machines
MS ISO 14819-2 : 2005 - Traffic and
traveller information (TTI) - TTI messages via traffic message
coding - Part 2 : Event and information codes for radio data
system - Traffic message channel (RDS-TMC) (RM460) (ICS
03.220.20 / 35.240.60)
MS ISO/TS 15000-3 : 2005 - Electronic
Business Extensible Markup Language (ebXML) - Part 3 : Registry
information model specification (ebRIM) (RM190)
(ICS 35.040)
MS ISO/TS 15000-4 : 2005 - Electronic Business Extensible Markup
Language (ebXML) - Part 4 : Registry services specification
(ebRS) (RM190) (ICS 35.040)
MS ISO 19106 : 2006 - Geographic information - Profiles (RM260) (ICS
35.240.70)
MS ISO 19110 : 2006 - Geographic information - Methodology for
feature cataloguing (RM330) (ICS 35.240.70)
MS ISO 19112 : 2006 - Geographic information - Spatial
referencing by geographic identifiers (RM210) (ICS 35.240.70)
MS ISO 19114 : 2006 - Geographic information - Quality evaluation
procedures (RM350) (ICS 35.240.70)
MS ISO 19116 : 2006 - Geographic information - Positioning
services (RM330) (ICS 35.240.70)
MS ISO 19119 : 2006 - Geographic information - Services (RM350) (ICS
35.240.70)
MS ISO 19125-1 : 2006 - Geographic information - Simple feature
access - Part 1 : Common architecture (RM290) (ICS 35.240.70)
MS ISO 19125-2 : 2006 - Geographic information - Simple feature
access - Part 2 : SQL option (RM350) (ICS 35.240.70)
43. Road Vehicles Engineering
MS ISO 337 : 2007 - Road
vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and
mounting/interchangeability dimensions (RM80) (ICS 43.040.70)
MS ISO 6597 : 2007 - Road
vehicles - Hydraulic braking systems , including those with
electronic control functions, for motor vehicles - Test
procedures (RM310) (ICS 43.040.40)
65. Agriculture
MS ISO 14183 : 2007 -
Animal feeding stuffs - Determination of monensin, narasin and
salinomycin contents - Liquid chromatographic method using
post-column derivatisation (RM220 (ICS 65.120)
MS ISO 14902 : 2007 - Animal feeding stuffs - Determination of
trypsin inhibitor activity of soya products (RM160) (ICS
65.120)
MS ISO 15914 : 2007 - Animal feeding stuffs - Enzymatic
determination of total starch content (RM160) (ICS 65.120)
71. Chemical Technology
MS 1922 : 2006 - Test
method for pH of engine coolants and antirusts (RM40) (ICS
71.080)
MS 1923 : 2006 - Test method for foaming tendencies of engine
coolants in glassware (RM40) (ICS 71.080)
MS 1924 : 2006 - Test method for effect of cooling system
chemical solutions on organic finishes for automotive vehicles
(RM40) (ICS 71.080)
MS IEC 60335-2-104 : 2007 - Household and similar electrical
appliances - Safety - Part 2-104 : Particular requirements for
appliances to recover and/or recycle refrigerant from air
conditioning and refrigeration equipment (RM410) (ICS 27.200
/ 71.100.45)
MS ISO 672 : 2006 - Soaps - Determination of moisture and
volatile matter content - Oven method (RM80) (ICS 71.100.40)
MS ISO 685 : 2006 - Analysis of soaps - Determination of total
alkali content and total fatty matter content (RM90) (ICS
71.100.40)
MS ISO 1066 : 2006 - Analysis of soaps - Determination of
glycerol content - Titrimetric method (RM90) (ICS 71.100.40)
75. Petroleum and related technologies
MS ISO 12213-1 : 2007 -
Natural gas - Calculation of compression factor - Part 1 :
Introduction and guidelines (RM170) (ICS 75.060)
MS ISO 12213-2 : 2007 - Natural gas - Calculation of compression
factor - Part 2 : Calculation using molar-composition analysis
(RM260) (ICS 75.060)
MS ISO 12213-3 : 2007 - Natural gas - Calculation of
compressibility factor - Part 3 : Calculation using physial
properties (RM280) (ICS 75.060)
77. Metallurgy
MS ISO 4948-1 : 2007 -
Steels - Classification - Part 1 : Classification of steels into
unalloyed and alloy steels based on chemical composition (RM80) (ICS
77.080.20)
MS ISO 4948-2 : 2007 - Steels - Classification - Part 2 :
Classification of unalloyed and alloy steels according to main
quality classes and main property or application characteristics
(RM120) (ICS 77.080.20)
81. Glass and Ceramics Industries
MS 1983 : 2007 - Test
method for shear strength of continuous fiber-reinforced advanced
ceramics at ambient temperatures (RM50) (ICS 81.060.30)
MS ISO 17092 : 2007 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of corrosion resistance of
monolithic ceramics in acid and alkaline solutions (RM140)
(ICS 81.060.30)
MS ISO 18452 : 2007 -
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Determination of thickness of ceramic films bt contact-probe
profilometer (RM140) (ICS 81.060.30)
MS ISO 18753 : 2007 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of absolute density of
ceramic powders by pyknometer (RM110) (ICS 81.060.30)
MS ISO 18754 : 2007 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of density and apparent
porosity (RM110) (ICS 81.060.30)
MS ISO 18755 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of thermal diffusivity of
monolithic ceramics by laser flash method (RM260) (ICS
81.060.30)
MS ISO 20501 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Weibull statistics for strength data
(RM270) (ICS 81.060.30)
MS ISO 20502 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of adhesion of ceramic
coatings by scratch testing (RM260) (ICS 81.060.30)
MS ISO 20504 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Test method for compressive behaviour of
continuous fibre-reinforcerd composites at room temperature
(RM220) (ICS 81.060.30)
MS ISO 20505 : 2007 -
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Determination of the interlaminar shear strength of
continuous-fibre-reinforced composites at ambient temperature by
the compression of double-notched test pieces and by the
losipescu test (RM210) (ICS 81.060.30)
MS ISO 20506 : 2007 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of the in-plane shear
strength of continous-fibre-reinforced composites at ambient
temperature by the losipescu test (RM180) (ICS 81.060.30)
MS ISO 20508 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of light transmittance of
ceramic films with transparent substrate (RM90) (ICS
81.060.30)
MS ISO 20509 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of oxidation resistance of
non-oxide monolithic ceramics (RM160) (ICS 81.060.30)
MS ISO 20808 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of friction and wear
characteristics of monolithic ceramics by ball-on-disc method
(RM140) (ICS 81.060.30)
MS ISO 22214 : 2007 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Test method for cyclic bending fatigue of
monolithic ceramics at room temperature (RM140) (ICS
81.060.30)
MS ISO 22215 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Test method for tensile creep of monolithic
ceramics (RM120) (ICS 81.060.30)
MS ISO 24369 : 2006 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of content of coarse
particles in ceramic powders by wet sieving method (RM110) (ICS
81.060.30)
MS ISO 24370 : 2007 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Test method for fracture toughness of
monolitic ceramics at room temperature by chevron-notched beam
(CNB) method (RM180) (ICS 81.060.30)
85. Paper Technology
MS ISO 777 : 2006 -
Paper, board and pulp - Determination of acid-soluble calcium
(First revision) (RM110) (ICS 85.060)
MS ISO 778 : 2006 - Paper, board and pulp - Determination of
acid-soluble copper (First revision) (RM110) (ICS 85.060)
MS ISO 779 : 2006 - Paper, board and pulp - Determination of
acid-soluble iron (First revision) (RM110) (ICS 85.060)
MS ISO 1830 : 2006 - Paper, board and pulps - Determination of
acid-soluble manganese (RM110) (ICS 85.060)
MS ISO 6588-1 : 2006 - Paper, board and pulp - Determination of
ph of aqueous extracts - Part 1 : Cold extraction (RM110)
(ICS 85.060)
MS ISO 6588-2 : 2006 - Paper, board and pulp - Determination of
ph of aqueous extracts - Part 2 : Hot extraction (RM110) (ICS
85.060)
MS ISO 7263 : 2006 - Corrugating medium - Determination of the
flat crush resistance after laboratory fluting (RM110) (ICS
85.060)
MS ISO 11475 : 2006 - Paper and board - Determination of CIE
whiteness, D65/10° (outdoor daylight) (RM160) (ICS 85.060)
97. Domestic and Commercial Equipment. Entertainment. Sports
MS 1597 : Part 2-58 :
2007 - Household and similar electrical appliances - Safety -
Part 2-58 : Particular requirements for commercial electric
diswashing machines (RM330) (ICS 97.040.40)
MS 1597 : Part 2-62 : 2007 - Household and similar electrical
appliances - Safety - Part 2-62 : Particular requirements for
commercial electric rinsing sinks (RM200) (ICS 97.040.50)
MS IEC 60335-2-90 : 2007 - Household and similar electrical
appliances - Safety - Part 2-90 : Particular requirements for
commercial microwave ovens (RM470) (ICS 97.040.20)