NEWLY PUBLISHED MALAYSIAN STANDARDS - AUGUST 2008
11. Health Care Technology
MS 2058 : 2008 - Code of
practice for good engineering maintenance management of active
medical devices (RM70) (ICS 11.040.01)
MS 2059 : 2008 - Medical laboratories - Guidance on laboratory
implementation of MS ISO 15189 : 2004 (RM30) (ICS 11.100.01)
MS 2061 : 2008 - Durability of rubber gloves - Test method (RM10)
(ICS 11.140 / 83.140.99)
MS ISO 15190 : 2008 -
Medical laboratories - Requirements for safety (RM280) (ICS
11.100)
MS ISO 15193 : 2008 - In
vitro diagnostic medical devices - Measurement of quantities in
samples of biological origin - Presentation of reference
measurement procedures (RM180) (ICS 11.100.10)
MS ISO 15194 : 2008 - In
vitro diagnostic medical devices - Measurement of quantities in
samples of biological origin - Description of reference materials
(RM170) (ICS 11.100)
MS ISO 15195 : 2008 -
Laboratory medicine - Requirements for reference measurement
laboratories (RM160) (ICS 11.100)
13. Environment. Health Protection. Safety
MS 1448 : 2006 -
Firefighting hoses - Semi-rigid hoses for fixed systems (RM30) (ICS
13.220.10)
MS 1952 : 2007 - Personal eye protection - Sunglare filters for
industrial use (RM20) (ICS 13.340.20)
MS 1956 : 2007 - Personal eye-protection - Non-optical test
methods (First revision) (RM40) (ICS 13.340.20)
MS 1959 : 2007 - Personal eye-protection - Infrared filters -
Transmittance requirements and recommended use (First revision)
(RM20) (ICS 13.340.20)
MS IEC 60695-11-5 : 2007 - Fire hazard testing - Part 11-5 : Test
flames - Needle-flame test method - Apparatus, confirmatory test
arrangement and guidance (RM230) (ICS 13.220.40 / 29.020)
MS ISO 14040 : 2008 -
Environmental management - Life cycle assessment - Principles and
framework (First revision) (RM210) (13.020.10 / 13.020.60)
MS ISO 16000-1 : 2008 -
Indoor air - Part 1 : General aspects of sampling strategy
(RM220) (ICS 13.040.20)
MS ISO 16000-2 : 2008 - Indoor air - Part 2 : Sampling strategy
for formaldehyde (RM170) (ICS 13.040.20)
MS ISO 16000-3 : 2008 - Indoor air - Part 3 : Determination of
formaldehyde and other carbonyl compounds - Active sampling
method (RM230) (ICS 13.040.20)
MS ISO 16000-4 : 2008 - Indoor air - Part 4 : Determination of
formaldehyde - Diffusive sampling method (RM140) (ICS
13.040.20)
MS ISO 16000-5 : 2008 - Indoor air - Part 5 : Sampling strategy
for volatile organic compounds (VOCs) (RM170) (ICS 13.040.20)
MS ISO 16017-1 : 2008 - Indoor, ambient and workplace air -
Sampling and analysis of volatile organic compounds by sorbent
tube / thermal desorption / capillary gas chromatography - Part 1
: Pumped sampling (RM240) (ICS 13.040.01)
MS ISO 16017-2 : 2008 - Indoor, ambient and workplace air -
Sampling and analysis of volatile organic compounds by sorbent
tube / thermal desorption / capillary gas chromatography - Part 2
: Diffusive sampling (RM280) (ICS 13.040.01)
21. Mechanical Systems and Components for General Use
MS 1989 : Part 1 : 2007 -
Pipe threads where pressure tight joints are made on the threads
- Part 1 : Taper external threads and parallel internal threads -
Dimensions, tolerances and designation (RM20) (ICS 21.040.30)
23. Fluid Systems and Components for General Use
MS 1165 : 2008 - Pressure
regulators and automatic changeover device for liquefied
petroleum gases (LPG) - Specification (Second revision) (RM30) (ICS
23.060)
MS ISO 4672 : 2008 -
Rubber and plastics hoses - sub - ambient tempertaure flexibility
tests (RM110) (ICS 23.040.70)
29. Electrical Engineering
MS IEC/TS 60034-16-3
: 2007 - Rotating electrical machines - Part 16 : Excitation
systems for synchronous machines - Section 3 : Dynamic
performance (RM200) (ICS 29.160)
MS IEC 60034-18-21 : 2007
- Rotating electrical machines - Part 18 : Functional evaluation
of insulation systems - Section 21 : Test procedures for
wire-wound windings - Thermal evaluation and classification
(RM360) (ICS 29.160.01 / 29.080.01)
MS IEC/TS 60034-18-33 : 2007 - Rotating electrical machines -
Part 18 : Functional evaluation of insulation systems - Section
33 : Test procedures for form-windings - Multifactor functional
evaluation - Endurance under combined thermal and electrical
stresses of insulation systems used in machines up to and
including 50 MVA and 15 kV (RM250) (ICS 29.080.30 / 29.160)
MS IEC 60079-2 : 2007 - Explosive atmospheres - Part 2 :
Equipment protection by pressurized enclosure "p"
(First revision) (RM60) (ICS 29.260.20)
MS IEC 60204-1 : 2008 - Safety of machinery - Electrical
equipment of machines - Part 1 : General requirements (RM620) (ICS
29.020)
MS IEC 60695-11-5 : 2007 - Fire hazard testing - Part 11-5 : Test
flames - Needle-flame test method - Apparatus, confirmatory test
arrangement and guidance (RM230) (ICS 13.220.40 / 29.020)
MS IEC 60929 : 2008 - AC-suplied electronic ballasts for tubular
fluorescent lamps - Performance requirements (First revision)
(RM150) (ICS 29.140)
MS IEC 61204 : 2007 - Low-voltage power supply devices, d.c
output - Performance characteristics (RM30) (ICS 29.200)
MS IEC 61310-1 : 2008 - Safety of machinery - Indication, marking
and actuation - Part 1 : Requirements for visual, acoustic and
tactile signals (RM250) (ICS 29.020)
MS IEC 61540 : 2008 - Electrical accessories - Portable residual
current devices without integral overcurrent protection for
household and similar use (PRCDS) (RM720) (ICS 29.130)
MS IEC 61543 : 2008 - Residual current - operated protective
devices (RCDS) for household and similar use - Electromagentic
compatibility (RM120) (ICS 29.020 / 29.120.50)
MS IEC 61643-22 : 2008 - Low-voltage surge protective devices -
Part 22 : Surge protective devices connected to
telecommunications and signalling networks - Selection and
application principles (RM410) (ICS 29.240 / 29.240.10)
MS IEC 62020 : 2008 - Electrical accessories - Residual current
monitors for household and similar uses (RCMS) (RM700) (ICS
29.120.50)
MS IEC 62040-1-1 : 2007 - Uninterruptible power systems (UPS) -
Part 1-1 : General and safety requirements for UPS used in
operator access areas (RM50) (ICS 29.200)
33. Telecommunications. Audio and Video Engineering
MS IEC 60096-2 : 2007 -
Radio frequency cables - Part 2 : Relevant cable specifications
(First revision) (RM160) (ICS 33.120.10)
MS IEC 60238 : 2008 -
Edison screw lampholders (First revision) (RM80) (ICS 33.100)
35. Information Technology. Office Machines
MS 1883 : Part 2 : 2005 -
Software engineering - Product quality - Part 2 : External
metrics (First revision) (RM100) (ICS 35.080)
MS 1883 : Part 4 : 2005 - Software engineering - Product quality
- Part 4 : Quality in use metrics (First revision) (RM80) (ICS
35.080)
MS 1987 : 2007 - Route numbering system and guide signs (RM50) (ICS
35.240.70)
43. Road Vehicles Engineering
MS 996 : Part 2 : 2007 -
Motorcycle chains and sprockets - Part 2 : Motorcycle sprockets -
Specification (RM20) (ICS 43.140)
MS 2046 : 2008 - Road
vehicles - Brake linings frictions materials - Visual inspection
(RM40) (ICS 43.040.40)
MS 2081 : 2008 - Road
vehicles - Rear underrun protective devices (RUPDs) (RM20) (ICS
43.040.60)
MS 2082 : 2008 - Road
vehicles - Braking systems - Temperature measuring methods (RM20)
(ICS 43.040.40)
53. Materials Handling Equipment
MS 1971 : 2007 - Cranes -
Inspections - Part 1 : General (RM20) (ICS 53.020.30)
83. Rubber and Plastics Industries
MS 114 : 2008 - Diaphragms for contraceptive use - Specification
(First revision) (RM30) (ICS 83.060)
MS 149 : 2008 - New pneumatic passenger car tyres - Specification
(Second revision) (RM20) (ICS 83.160.10)
MS 1394 : 2008 - New pneumatic tyres for highway vehicles other
than passenger cars - Specification (First revision) (RM10)
(ICS 83.160.10)
MS 2061 : 2008 -
Durability of rubber gloves - Test method (RM10) (ICS 11.140
/ 83.140.99)
MS ISO 4587 : 2008 -
Adhesives - Determination of tensile lap-shear strength of
rigid-to-rigid bonded assemblies (RM90) (ICS 83.180)
97. Domestic and Commercial Equipment.
Entertainment. Sports
MS IEC
60335-2-79 : 2007 - Household and similar electrical appliances -
Safety - Part 2-79 : Particular requirements for high pressure
cleaners and steam cleaners (RM470) (ICS 97.080)