NEWLY PUBLISHED MALAYSIAN STANDARDS - AUGUST 2009
01.Generalities. Terminology.
Standardization
MS ISO 7998 : 2008 -
Ophthalmic optics - Spectacle frames - Lists of equivalent terms
and vocabulary (RM250) (ICS 01.040.11 / 11.040.70)
MS ISO 21067 : 2008 -
Packaging - Vocabulary (RM160) (ICS 55.020 / 01.040.55)
03. Sociology. Services. Company Organization and Management.
Administration. Transport
MS 2203 : 2008 - Cranes -
Training of operators - Part 3 : Tower cranes (RM20) (ICS
03.100.30 / 53.020.20)
11. Health Care Technology
MS IEC 60601-2-37 : 2009
- Medical electrical equipment - Part 2-37 : Particular
requirements for the safety of ultrasonic medical diagnostic and
monitoring equipment (RM80) (ICS 11.040.55 / 17.140.50)
MS IEC 62304 : 2009 -
Medical device software - Software life cycle processes (RM520) (11.040)
MS ISO 7998 : 2008 - Ophthalmic optics - Spectacle frames - Lists
of equivalent terms and vocabulary (RM250) (ICS 01.040.11 /
11.040.70)
MS ISO 9342-2 : 2008 -
Optics and optical instruments - Test lenses for calibration of
focimeters - Part 2 : Test lenses for focimeters used for
measuring contact lenses (RM140) (ICS 11.040.70)
13. Environment. Health
Protection. Safety
MS 1601-1 : 2009 - Specification for fire resistant doorsets -
Part 1 : Design requirements and variation from the tested
specimen (RM30) (ICS 13.220.50)
MS 1601-3 : 2009 - Specification for fire resistant doorsets -
Part 3 : Code of practice for installation of fire resistant
doorsets (RM20) (ICS 13.220.50)
MS 1601-4 : 2009 - Specification for fire resistant doorsets -
Part 4 : Requirements and method of determining the performance
of mortice locksets (RM40) (ICS 13.220.50)
MS IEC 60695-2-10 : 2008 - Fire hazard testing - Part 2-10 :
Glowing / hot-wire based test methods - Glow-wire apparatus and
common test procedures (RM140) (ICS 13.220.40 / 29.020)
MS ISO 7250-1 : 2008 - Basic human body measurements for
technological design - Part 1 : Body measurement definitions and
landmarks (First revision) (RM240) (ICS 13.180)
MS ISO 8030 : 2008 - Rubber and thermoplastics hoses - Method of
test for flammability (RM100) (ICS 23.040.70 / 13.220.40)
MS ISO 11079 : 2008 - Ergonomics of the thermal environment -
Determination and interpretation of cold stress when using
required clothing insulation (IREQ) and local cooling effects
(RM40) (ICS 13.180)
MS ISO 13829 : 2008 - Water quality - Determination of the
genotoxicity of water and waste water using the UMU-test (RM200) (ICS
13.060.70)
MS ISO 14505-2 : 2008 - Ergonomics of the thermal environment -
Evaluation of thermal environments in vehicles - Part 2 :
Determination of equivalent temperature (RM40) (ICS 13.180
43.020)
MS ISO 14505-3 : 2008 - Ergonomics of the thermal environment -
Evaluation of thermal environments in vehicles - Part 3 :
Evaluation of thermal comfort using human subjects (RM30) (ICS
13.180 / 43.020)
MS ISO 15265 : 2008 - Ergonomics of the thermal environment -
Risk assessment strategy for prevention of stress or discomfort
in thermal working conditions (RM20) (ICS 13.180)
MS ISO 15535 : 2008 - General requirements for establishing
anthropometric databases (First revision) (RM210) (ICS
13.180)
MS ISO 20685 : 2008 - 3-D scanning methodologies for
internationally compatible anthropometric databases (RM30)
(ICS 13.180)
17. Metrology and
Measurement. Physical Phenomena
MS IEC 60051-6 : 2008 -
Direct acting indicating analogue electrical measuring
instruments and their accessories - Part 6 : Special requirements
for ohmmeters (impedance meters) and conductance meters (First
revision) (RM100) (ICS 17.220.20)
MS IEC 60051-7 : 2008 - Direct acting indicating analogue
electrical measuring instruments and their accessories - Part 7 :
Special requirements for multi-function instruments (First
revision) (RM80) (ICS 17.220.20)
MS IEC 60051-8 : 2008 - Direct acting indicating analogue
electrical measuring instruments and their accessories - Part 8 :
Special requirements for accessories (First revision) (RM100)
(ICS 17.220.20)
MS IEC 60051-9 : 2008 - Direct acting indicating analogue
electrical measuring instruments and their accessories - Part 9 :
Recommended test methods (First revision) (RM490) (ICS
17.220.20)
MS IEC 60601-2-37 : 2009 - Medical electrical equipment - Part
2-37 : Particular requirements for the safety of ultrasonic
medical diagnostic and monitoring equipment (RM80) (ICS
11.040.55 / 17.140.50)
MS ISO 9334 : 2008 -
Optics and photonics - Optical transfer function - Definitions
and mathematical relationships (RM250) (ICS 17.180.01)
19. Testing
MS IEC 60068-2-21 : 2008 - Environmental testing - Part 2-21 :
Tests - Test U : Robustness of terminations and integral mounting
devices (RM270) (ICS 19.040 / 31.190)
MS IEC 60068-2-27 : 2008 - Environmental testing - Part 2-27 :
Tests - Test EA and guidance : Shock (RM360) (ICS 19.040)
MS IEC 60068-2-29 : 2008 - Environmental testing procedures -
Part 2-29 : Tests - Test EB and guidance: Bump (RM120) (ICS
19.040)
MS IEC 61010-2-010 : 2008 - Safety requirements for electrical
equipment for measurement, control and laboratory use - Part
2-010 : Particular requirements for laboratory equipment for the
heating of materials (RM150) (ICS 19.080)
MS IEC 61010-2-020 : 2008 - Safety requirements for electrical
equipment for measurement, control and laboratory use - Part
2-020 : Particular requirements for laboratory centrifuges
(RM270) (ICS 19.080 / 71.040.10)
23. Fluid Systems and
Components for General Use
MS ISO 8030 : 2008 - Rubber and thermoplastics hoses - Method of
test for flammability (RM100) (ICS 23.040.70 / 13.220.40)
29. Electrical Engineering
MS 2230 : 2009 -
Electromagnetic compatibility - Environment - Overvolatges on
public electricity distribution networks (RM50) (ICS 29.240 /
33.100)
MS IEC 60695-2-10 : 2008
- Fire hazard testing - Part 2-10 : Glowing / hot-wire based test
methods - Glow-wire apparatus and common test procedures (RM140) (ICS
13.220.40 / 29.020)
MS IEC 62423 : 2008 -
Type B residual current operated circuit-breakers with an without
integral overcurrent protection for household and similar uses
(Type B RCCBs and type B RCBOs) (RM270) (ICS 29.120 /
29.120.50)
31. Electronics
MS IEC 60068-2-21 : 2008
- Environmental testing - Part 2-21 : Tests - Test U : Robustness
of terminations and integral mounting devices (RM270) (ICS
19.040 / 31.190)
33. Telecommunications. Audio and Video Engineering
MS 2230 : 2009 -
Electromagnetic compatibility - Environment - Overvoltages on
public electricity distribution networks (RM50) (ICS 29.240 /
33.100)
MS 2235 : 2009 - Internet service provider (ISP) and large scale
enterprise IPv6 fixed network implementation and compliance
testing - Guidelines (RM40) (ICS 33.020)
MS CISPR 25 : 2009 -
Vehicles, boats and internal combustion engines - Radio
disturbance characteristics - Limits and methods of measurement
for the protection of on-board receivers (Second revision)
(RM520) (ICS 33.100.10 / 33.100.20)
MS IEC 60107-1 : 2008 - Methods of measurement on receivers for
television broadcast transmissions - Part 1 : General
considerations - Measurement at radio and video frequencies
(RM590) (ICS 33.160.25)
MS IEC 62087 : 2008 -
Methods of measurement for the power consumption of audio, video
and related equipment (RM120) (ICS 33.160.01)
35. Information Technology. Office Machines
MS 62367 : 2008 - Safety
aspects for xdsl signals on circuits connected to
telecommunication networks (DSL : Digital Subscriber Line) (RM20)
(ICS 35.020)
MS ISO 6709 : 2009 - Standard representation of geographic point
location by coordinates (RM250) (ICS 35.040)
MS ISO/IEC 11770-4 : 2008 - Information technology - Security
techniques - Key management - Part 4 : Mechanisms based on weak
secrets (RM280) (ICS 35.040)
MS ISO/IEC 13818-3 : 2009 - Information technology - Generic
coding of moving pictures and associated audio information : Part
3 : Audio (RM440) (ICS 35.040)
MS ISO/IEC 18028-1 : 2008 - Information technology - Security
techniques - IT network security - Part 1 : Network security
management (RM340) (ICS 35.040)
MS ISO/IEC 18028-3 : 2008 - Information technology - Security
techniques - IT network security - Part 3 : Securing
communications between networks using security gateways (RM230) (ICS
35.040)
MS ISO/IEC 18028-4 : 2008 - Information technology - Security
techniques - IT network security - Part 4 : Securing remote
access (RM300) (ICS 35.040)
MS ISO/IEC 18028-5 : 2008 - Information technology - Security
techniques - IT network security - Part 5 : Securing
communications across networks using virtual private networks
(RM230) (ICS 35.040)
MS ISO 19131 : 2009 -
Geographic information - Data product specifications (RM290) (ICS
35.240.70)
MS ISO 19141 : 2009 - Geographic information - Schema for moving
features (RM320) (ICS 35.240.70)
37. Image Technology
MS ISO 8036 : 2008 -
Optics and photonics - Microscopes - Immersion liquids for light
microscopy (RM110) (ICS 37.020)
MS ISO 9022-7 : 2008 - Optics and photonics - Environmental test
methods - Part 7 : Resistance to drip or rain (RM160) (ICS
37.020)
MS ISO 10109-1 : 2008 -
Optics and photonics - Environmental requirements - Part 1 :
General overview, terms and definitions, climatic zones and their
parameters (RM130) (ICS 37.020)
43. Road Vehicle Engineering
MS ISO 3842 : 2008 - Road
vehicles - Fifth wheels - Interchangeability (RM130) (ICS
43.040.70)
MS ISO 4081 : 2008 - Rubber hoses and tubing for cooling systems
for internal - combustion engines - Specification (RM160)
(ICS 83.140.40 / 43.040.01)
MS ISO 14505-2 : 2008 -
Ergonomics of the thermal environment - Evaluation of thermal
environments in vehicles - Part 2 : Determination of equivalent
temperature (RM40) (ICS 13.180 / 43.020)
MS ISO 14505-3 : 2008 - Ergonomics of the thermal environment -
Evaluation of thermal environments in vehicles - Part 3 :
Evaluation of thermal comfort using human subjects (RM30) (ICS
13.180 / 43.020)
MS ISO 14794 : 2008 - Heavy commercial vehicles and buses -
Braking in a turn - Open-loop test methods (RM230) (ICS
43.020)
55. Packaging and Distribution of Goods
MS ISO 6780 : 2008 - Flat
pallets for intercontinental materials handling - Principal
dimensions and tolerances (RM170) (ICS 55.180.20)
MS ISO 7348 : 2008 - Packaging - Glass containers - Vocabulary
(RM160) (ICS 55.020)
MS ISO 21067 : 2008 -
Packaging - Vocabulary (RM160) (ICS 55.020 / 01.040.55)
53. Materials Handling Equipment
MS 2203 : 2008 - Cranes - Training of operators - Part 3 : Tower
cranes (RM20) (ICS 03.100.30 / 53.020.20)
59.Textile and Leather Technology
MS 1747-1 : 2009 -
Textiles - Malaysian woven fabric - Part 1 : Malaysian Songket
(First revision) (RM20) (ICS 59.080.01)
65. Agriculture
MS 1784-8 : 2009 - Good
agricultural practice (GAP) - Part 8 : Herbs (RM30) (ICS
65.020.20)
MS 2208 : 2009 - Animal
feeding stuffs - Code of practice (RM20) (ICS 65.120)
67. Food Technology
MS 742 : 2009 - Prawns /
shrimps canned in brine - Specification (First revision) (RM40)
(ICS 67.120.30)
MS 1229 : 2008 - Fresh sweet corn - Specification (First
revision) (RM20) (ICS 67.080.20)
MS 1229 : 2008 - Jagung manis segar - Spesifikasi (Ulangkaji
pertama) (RM20) (ICS 67.080.20)
MS 1323 : 2008 - Fresh
mustards - Specification (First revision) (RM10) (ICS
67.080.20)
MS 1323 : 2008 - Sawi segar - Spesifikasi (Semakan pertama)
(RM20) (ICS 67.080.20)
MS 1797 : 2008 - Anhydrous milk fat - Determination of sterol
composition by gas liquid chromatography ( reference method)
(RM20) (ICS 67.100.01)
MS 2207 : 2008 - Animal
and vegetable fats and oils - Determination of oxidative
stability (accelerated oxidation test) (RM20) (ICS 67.200.10)
MS 2211 : 2009 - Plastics
flexible packaging materials for packing of refined edible oils
and fats - Specification (RM20) (ICS 67.040)
71. Chemical Technology
MS IEC 61010-2-020 : 2008
- Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-020 : Particular requirements
for laboratory centrifuges (RM270) (ICS 19.080 / 71.040.10)
75. Petroleum and Related Technologies
MS 910 : 2008 - Test
method for motor octane number of spark-ignition engine fuel
(First revision) (RM110) (ICS 75.080)
MS 912 : 2008 - Test method for lead in gasoline - Iodine
monochloride method (First revision) (RM40) (ICS 75.080)
MS 961 : 2008 - Test method for water and sediment in
fuel oils by the centrifuge method (laboratory procedure) (First
revision) (RM50) (ICS 75.080)
83. Rubber and Plastics
Industries
MS ISO 2093 : 2008 - Plastics - Determination of hardness
- Part 2 : Rockwell hardness (RM110) (ICS 83.080.01)
MS ISO 4081 : 2008 -
Rubber hoses and tubing for cooling systems for internal -
combustion engines - Specification (RM160) (ICS 83.140.40 /
43.040.01)
MS ISO 8510-2 : 2008 - Adhesives - Peel test for a
flexible-to-rigid bonded test specimen assembly - Part 2 : 180°
peel (RM110) (ICS 83.180)
MS ISO 10364 : 2008 - Structural adhesives -
Determination of the pot life (working life) of multi-component
adhesives (RM130) (ICS 83.180)
MS ISO 15270 : 2008 - Plastics - Guidelines for the
recovery and recycling of plastics waste (RM20) (ICS
83.080.01)
MS ISO 17087 : 2008 - Specifications for adhesives used for
finger joints in non-structural lumber products (RM230) (ICS
83.180)
MS ISO 17194 : 2008 - Structural adhesives - A standard database
of properties (RM110) (ICS 83.180)
MS ISO 19212 : 2008 - Adhesives - Determination of
temperature dependence of shear strength (RM130) (ICS
83.180)
87. Paint and Colour
Industries
MS 133 : Part
A7 : 2008 - Paints and varnishes - Determination of viscosity
using rotary viscometers - Part A7 : Cone-and-plate viscometer
operated at a high rate of shear (Second revision) (RM10) (ICS
87.040)
MS 133 : Part F8 : 2008 - Paints and varnishes - Part F8 :
Determination of resistance to humid atmospheres containing
sulfur dioxide (RM10) (ICS 87.040)
MS 133 : Part F20 : 2008 - Paints and varnishes - Determination
of resistance to filiform corrosion - Part F20 : Aluminium
substrates (RM20) (ICS 87.040)
MS 133 : Part F21 : 2008 - Paints and varnishes - Determination
of resistance to humidity - Part F21 : Procedures for exposing
test specimens in condensation-water atmospheres (RM20) (ICS
87.040)
MS 133 : Part G10 : 2008 - Paints and varnishes - Determination
of resistance to liquids - Part G10 : Method using an absorbent
medium (RM20) (ICS 87.040)
MS 133 : Part G11 : 2008 - Paints and varnishes - Determination
of resistance to liquids - Part G11 : Spotting methods (RM20)
(ICS 87.040)
MS 133 : Part G12 : 2008 - Paints and varnishes - Determination
of resistance to liquids - Part G12 : Temperature-gradient oven
method (RM20) (ICS 87.040)
91. Construction
Materials and Building
MS 1799 : 2008
- Urinals - Specification (RM20) (ICS 91.100 /
91.140.70)
97. Domestic and Commercial Equipment.
Entertainment. Sports
MS 1159 : 2009 - Pencil - Specification (First revision)
(RM10) (ICS 97.180)
MS 1966 : 2007 - Commercial gas cooking appliances for use with
liquefied petroleum gases (RM120) (ICS 97.040.20)
MS IEC 60730-2-8 : 2008 - Automatic electrical controls
for household and similar use - Part 2-8 : Particular
requirements for electrically operated water valves, including
mechanical requirements (RM370) (ICS 97.120)