NEWLY PUBLISHED MALAYSIAN STANDARDS - FEBRUARY 2007
11. Health Care Technology
1. MS ISO 10993-1 : 2005 - Biological
evaluation of medical devices - Part 1 : Evaluation and testing (RM30) (ICS
11.100)
2. MS ISO 10993-13 : 2005 - Biological
evaluation of medical devices - Part 13 : Identification and
quantification of degradation products from polymeric medical devices (RM20) (ICS
11.100)
27.
Energy and Heat Transfer Engineering
3. MS ISO 4548-1 : 2005 - Methods of test for full-flow
lubricating oil filters for internal combustion engines - Part 1 : Differential
pressure / flow characteristics (RM140) (ICS 27.020; 43.060.01)
4. MS ISO 4548-2 : 2005 - Methods of test for full-flow
lubricating oil filters for internal combustion engines - Part 2 : Element
by-pass valve characteristics (RM120) (ICS 27.020; 43.060.01)
5. MS ISO 4548-3 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 3 : Resistance to high
differential pressure and to elevated temperature (RM140) (ICS 27.020;
43.060.01)
6. MS ISO 4548-4 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 4 : Initial particle retention
efficiency, life and cumulative efficiency (Gravimetric method) (RM260) (ICS
27.020; 43.060.01)
7. MS ISO 4548-5 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 5 : Cold start simulation and
hydraulic pulse durability test (RM110) (ICS 27.020; 43.060.01)
8. MS ISO 4548-6 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 6 : Static burst pressure test
(RM80) (ICS 27.020; 43.060.01)
9. MS ISO 4548-7 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 7 : Vibration fatigue test (RM110)
(ICS 27.020; 43.060.01)
10. MS ISO 4548-9 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 9 : Inlet and outlet anti-drain
valve tests (RM120) (ICS 27.020; 43.060.01)
11.
MS ISO 4548-11 : 2005 - Methods of test for full-flow lubricating oil filters
for internal combustion engines - Part 11 : Self-cleaning filters (RM220)
(ICS 27.020; 43.060.01)
12. MS ISO 4548-12 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 12 : Filtration efficiency using
particle counting, and contaminant retention capacity (RM230) (ICS 27.020; 43.060.01)
35. Information Technology. Office
Machines
13. MS 1901 : PART 1 : 2006 - Malaysian electronic passport -
Part 1 : Physical characteristics (RM10) (ICS 35.240.15)
14. MS 1901 : PART 2 : 2006 - Malaysian electronic passport - Part 2 :
Radio frequency power and signal interface (RM10) (ICS 35.240.15)
15. MS 1901 : PART 3 : 2006 - Malaysian electronic passport - Part 3 :
Initialisation (RM20) (ICS 35.240.15)
16. MS 1901 : PART 4 : 2006 - Malaysian electronic passport - Part 4 :
Transmission protocol (RM10) (ICS 35.240.15)
17. MS 1901 : PART 6 : 2006 - Malaysian electronic passport - Part 6 :
Biometrics (RM30) (ICS 35.240.15)
18. MS 1901 : PART 8 : 2006 - Malaysian electronic passport - Part 8 : Test
methods (RM10) (ICS 35.240.15)
19. MS 2039 : 2006 - Addresses - Standard format - Requirements (RM50)
(ICS 35.240.70)
43. Road Vehicle Engineering
20. MS 996 : PART 1 : 2006 - Motorcycle chains and sprockets -
Part 1 : Motorcycle chains - Specification (First revision) (RM20) (ICS
43.140)
21. MS ISO 4548-1 : 2005 - Methods of test for full-flow
lubricating oil filters for internal combustion engines - Part 1 : Differential
pressure / flow characteristics (RM140) (ICS 27.020; 43.060.01)
22. MS ISO 4548-2 : 2005 - Methods of test for full-flow
lubricating oil filters for internal combustion engines - Part 2 : Element
by-pass valve characteristics (RM120) (ICS 27.020; 43.060.01)
23. MS ISO 4548-3 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 3 : Resistance to high
differential pressure and to elevated temperature (RM140) (ICS 27.020;
43.060.01)
24. MS ISO 4548-4 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 4 : Initial particle retention
efficiency, life and cumulative efficiency (Gravimetric method) (RM260) (ICS
27.020; 43.060.01)
25. MS ISO 4548-5 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 5 : Cold start simulation and
hydraulic pulse durability test (RM110) (ICS 27.020; 43.060.01)
26. MS ISO 4548-6 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 6 : Static burst pressure test
(RM80) (ICS 27.020; 43.060.01)
27. MS ISO 4548-7 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 7 : Vibration fatigue test (RM110)
(ICS 27.020; 43.060.01)
28. MS ISO 4548-9 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 9 : Inlet and outlet anti-drain
valve tests (RM120) (ICS 27.020; 43.060.01)
29.
MS ISO 4548-11 : 2005 - Methods of test for full-flow lubricating oil filters
for internal combustion engines - Part 11 : Self-cleaning filters (RM220)
(ICS 27.020; 43.060.01)
30. MS ISO 4548-12 : 2005 - Methods of test for full-flow lubricating oil
filters for internal combustion engines - Part 12 : Filtration efficiency using
particle counting, and contaminant retention capacity (RM230) (ICS 27.020; 43.060.01)
31. MS ISO 3996 : 2005 - Road vehicles - Brake hose assembles for hydraulic
braking systems used with non-petroleum-base brake fluid (RM170) (ICS
43.040.40)
32. MS ISO 4038 : 2005 - Road vehicles - Hydraulic braking systems - Simple
flare pipes, tapped holes, male fittings and hose end fittings (RM140) (ICS
43.040.40)
33. MS ISO 5011 : 2005 - Inlet air cleaning equipment for internal
combustion engines and compressors - Performance (RM280) (ICS 43.060.20)
34. MS ISO 6120 : 2005 - Road vehicles - Brake hose assemblies for hydraulic
braking systems used with petroleum-base brake fluid (RM170) (ICS 43.040.40)
35. MS ISO 6487 : 2005 - Road vehicles - Measurement techniques in impact
tests - Instrumentation (RM160) (ICS 43.040.80)
36. MS ISO 12103-1 : 2005 - Road vehicles - Test dust for filter evaluation -
Part 1 : Arizona test dust (RM140) (ICS 43.060.20, 43.060.40)
37. MS ISO 12103-2 : 2005 - Road vehicles - Test dust for filter evaluation -
Part 2 : Aluminium oxide test dust (RM160) (ICS 43.060.20, 43.060.40)
55. Packaging and Distribution of Goods
38. MS 2028 : 2006 - Packaging - Wet cargo - Guidelines for carriage on
air transport (RM40) (ICS 55.020)
65. Agriculture
39. MS 23 : PART 1 : 2006 - Household insecticide products - Physical,
chemical and biological efficacy requirements - Mosquito coil (Fourth revision)
(RM20) (ICS 65.100.01)
40. MS 1255 : 2006 - Household insecticide products - Physical, chemical and
biological efficacy requirements - Surface and direct spray aerosol (First
revision) (RM20) (ICS 65.100.10, 71.100.99)
41. MS 1911 : PART 1 : 2006 - Household insecticide products - Evaluation
method for biological efficacy - Part 1 : Glass chamber method (RM10) (ICS
65.100.10, 71.100.99)
42. MS 1911 : PART 2 : 2006 - Household insecticide products - Evaluation
method for biological efficacy - Part 2 : Peet Grady method (RM20) (ICS
65.100.10, 71.100.99)
43. MS 1911 : PART 3 : 2006 - Household insecticide products - Evaluation method
for biological efficacy - Part 3 : Cyclinder method (RM20) (ICS
65.100.10, 71.100.99)
44. MS 1911 : PART 4 : 2006 - Household insecticide products - Evaluation method
for biological efficacy - Part 4 : Plaque method (RM10) (ICS 65.100.10,
71.100.99)
93. Civil Engineering
45. MS 2038 : 2006 - Site investigations - Code of practice (RM300) (ICS
93.020)