NEWLY PUBLISHED MALAYSIAN STANDARDS - FEBRUARY 2010
01. Generalities. Terminology.
Standardization
MS ISO 129-1 : 2009 -
Technical drawings - Indication of dimensions and tolerances -
Part 1 : General principles (RM280) (ICS 01.100.01)
MS ISO 7083 : 2009 - Technical drawings - Symbols for geometrical
tolerancing - Proportions and dimensions (RM140) (ICS
01.100.20)
MS ISO 10209-2 : 2009 - Technical product documentation -
Vocabulary - Part 2 : Terms relating to projection methods (RM ) (01.100.01
/ 01.040.01)
03. Sociology. Services. Company Organization and Management.
Administration. Transport
MS 2300 : 2009 -
Value-based management systems - Requirements from an Islamic
perspective (RM20) (ICS 03.120.10)
MS ISO/TS 16949 : 2009 -
Quality management systems - Particular requirements for the
application of ISO 9001 : 2008 for automotive production and
relevant service part organizations (First revision) (RM60) (ICS
03.120.10 / 43.020)
11. Health Care Technology
MS IEC 60601-1-2 : 2007 -
Medical electrical equipment - Part 1-2 : General requirements
for safety - Collateral standard : Electromagnetic compatibility
- Requirements and tests (RM120) (ICS 11.040.01 / 33.100.10 /
33.100.20)
MS IEC 60601-2-9 : 2006 - Medical electrical equipment - Part 2 :
Particular requirements for the safety of patient contact
dosemeters used in radiotherapy with electrically connected
radiation detectors (RM140) (ICS 11.040.50)
MS IEC 60601-2-38 : 2007 - Medical electrical equipment - Part
2-38 : Particular requirements for the safety of electrically
operated hospital beds (RM60) (ICS 11.140)
MS ISO 8980-2 : 2009 - Ophthalmic optics - Uncut finished
spectacle lenses - Part 2 : Specifications for progressive power
lenses (RM130) (ICS 11.040.70)
MS ISO 10322-1 : 2009 - Ophthalmic optics - Semi-finished
spectacle lens blanks - Part 1 : Specifications for single-vision
and multifocal lens blanks (RM140) (ICS 11.040.70)
MS ISO 10322-2 : 2009 - Ophthalmic optics - Semi-finished
spectacle lens blanks - Part 2 : Specifications for progressive
power lens blanks (RM130) (ICS 11.040.70)
MS ISO 11985 : 2009 - Ophthalmic optics - Contact lenses - Ageing
by exposure to UV and visible radiation (in vitro method) (RM110)
(ICS 11.040.70)
MS ISO 12864 : 2009 - Ophthalmic optics - Contact lenses -
Determination of scattered light (RM100) (ICS 11.040.70)
MS ISO 15004-1 : 2009 -
Ophthalmic instruments - Fundamental requirements and test
methods - Part 1 : General requirements applicable to all
ophthalmic instruments (RM130) (ICS 11.040.70)
MS ISO 15004-2 : 2009 - Ophthalmic instruments - Fundamental
requirements and test methods - Part 2 : Light hazard protection
(RM290) (ICS 11.040.70)
13. Environment. Health Protection. Safety
MS 2096 : Part 6 : 2008 - Personal flotation devices - Part 6 :
Special purpose lifejackets and buoyancy aids - Safety
requirements and additional test methods (RM30) (ICS
13.340.70)
17. Metrology and Measurement. Physical Phenomena
MS 62053-11 : 2009 -
Electricity metering equipment (a.c.) - Particular requirements -
Part 11 : Electromechanical meters for active energy (classes
0,5, 1 and 2) (Second revision) (RM20) (ICS 17.220.20)
MS 62053-21 : 2009 - Electricity metering equipment (a.c.) -
Particular requirements - Part 21 : Static meters for active
energy (classes 1 and 2) (Second revision) (RM30) (ICS
17.220.20)
MS 62053-22 : 2009 - Electricity metering equipment (a.c.) -
Particular requirements - Part 22 : Static meters for active
energy (classes 0,2 S and 0,5 S) (Second revision) (RM20) (ICS
17.220.20)
MS 62053-23 : 2009 - Electricity metering equipment (a.c.) -
Particular requirements - Part 23 : Electromechanical meters for
reactive energy (classes 2 and 3) (Second revision) (RM30) (ICS
17.220.20)
MS IEC 62053-52 : 2009 - Electricity metering equipment (a.c.) -
Particular requirements - Part 52 : Symbols (Second revision)
(RM170) (ICS 17.220.20 / 91.140.50)
MS ISO/ASTM 51649 : 2009
- Practice for dosimetry in an electron beam facility for
radiation processing at energies between 300 keV and 25 meV
(RM260) (ICS 17.240)
23. Fluid Systems and Components for General Use
MS 1220 : 2010 -
Performance and construction of electric circulating fans and
regulators (Second revision) (RM30) (ICS 23.120)
29. Electrical Engineering
MS 1238 : 2009 -
Conductors for overhead lines zinc coated steel wires (First
revision) (RM20) (ICS 29.060.10)
MS IEC 60071-1 : 2009 - Insulation co-ordination - Part 1 :
Definitions, principles and rules (RM320) (ICS 29.080.30)
MS IEC 60071-2 : 2009 - Insulation co-ordination - Part 2 :
Application guide (RM560) (ICS 29.080.01)
MS IEC 60086-3 : 2010 - Primary batteries - Part 3 : Watch
batteries (RM30) (ICS 29.220.10 / 39.040.10)
MS IEC 60364-7-710 : 2009 - Electrical installations of buildings
- Part 7-710 : Requirements for special installations or
locations - Medical locations (RM190) (ICS 29.020 /
91.140.50)
33. Telecommunications. Audio and Video
Engineering
MS IEC 60601-1-2 : 2007 - Medical electrical equipment - Part 1-2
: General requirements for safety - Collateral standard :
Electromagnetic compatibility - Requirements and tests (RM120) (ICS
11.040.01 / 33.100.10 / 33.100.20)
MS IEC 61000-4-13 : 2009 - Electromagnetic compatibility (EMC) -
Part 4-13 : Testing and measurement techniques - Harmonics and
interharmonics including mains signalling at a.c. power port, low
frequency immunity tests (RM290) (ICS 33.100.20)
MS ISO 11452-1 : 2009 -
Road vehicles - Component test methods for electrical
disturbances from narrowband radiated electromagnetic energy -
Part 1 : General principles and terminology (RM210) (ICS
33.100.20 / 43.040.10)
MS ISO 11452-2 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 2 : Absorber - lined shielded
enclosure (RM170) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-3 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 3 : Transverse electromagnetic
(TEM) cell (RM200) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-4 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 4 : Bulk current injection (BCI)
(RM230) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-5 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 5 : Stripline (RM170) (ICS
33.100.20 / 43.040.10)
MS ISO 11452-7 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 7 : Direct radio frequency (RF)
power injection (RM140) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-8 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 8 : Immunity to magnetic fields
(RM200) (ICS 33.100.20 / 43.040.10)
35. Information Technology. Office Machines
MS 2231-2 : 2009 -
Geographic information - Reference model - Part 2 : Imagery
(RM100) (ICS 35.240.70)
MS 2256 : 2009 - Geographic information - Guidelines for the
determination of geographical names (RM30) (ICS 35.240)
MS ISO 19117 : 2006 - Geographic information - Portrayal (RM290) (ICS
35.240.70)
MS ISO 19118 : 2006 - Geographic information - Encoding (RM440) (ICS
35.240.70)
MS ISO/TS 19127 : 2006 - Geographic information - Geodetic codes
and parameters (RM210) (ICS 35.240.70 / 70.040)
39. Precision Mechanics.
Jewellery
MS IEC 60086-3 : 2010 - Primary batteries - Part 3 : Watch
batteries (RM30) (ICS 29.220.10 / 39.040.10)
43. Road Vehicle Engineering
MS ISO 11452-1 : 2009 -
Road vehicles - Component test methods for electrical
disturbances from narrowband radiated electromagnetic energy -
Part 1 : General principles and terminology (RM210) (ICS
33.100.20 / 43.040.10)
MS ISO 11452-2 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 2 : Absorber - lined shielded
enclosure (RM170) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-3 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 3 : Transverse electromagnetic
(TEM) cell (RM200) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-4 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 4 : Bulk current injection (BCI)
(RM230) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-5 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 5 : Stripline (RM170) (ICS
33.100.20 / 43.040.10)
MS ISO 11452-7 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 7 : Direct radio frequency (RF)
power injection (RM140) (ICS 33.100.20 / 43.040.10)
MS ISO 11452-8 : 2009 - Road vehicles - Component test methods
for electrical disturbances from narrowband radiated
electromagnetic energy - Part 8 : Immunity to magnetic fields
(RM200) (ICS 33.100.20 / 43.040.10)
MS ISO/TS 16949 : 2009 -
Quality management systems - Particular requirements for the
application of ISO 9001 : 2008 for automotive production and
relevant service part organizations (First revision) (RM60) (ICS
03.120.10 / 43.020)
65. Agriculture
MS 320 : 2008 - Seeds - Sampling and test (Second revision)
(RM60) (ICS 65.020.20)
MS 2273 : 2009 (P) - Good
animal husbandry practice - Edible-birdnest swiftlet ranching and
its premises (RM30) (ICS 65.020.20)
67. Food Technology
MS 85 : 2010 -
Edible wheat flour - Specification (Third revision) (RM30) (ICS
67.060)
MS 1252 : 2009 - Fresh French beans - Specification (First
revision) (RM20) (ICS 67.080.20)
MS 1252 : 2009 - Kacang buncis segar - Spesifikasi (Semakan
pertama) (RM20) (ICS 67.080.20)
MS 1817 : 2009 - Ceramic tableware - Specification (First
revision) (RM20) (ICS 67.250 / 81.040.30 / 81.060.20 /
97.040.60)
MS 2249 : 2009 - Fresh baby corn - Specification (RM20) (ICS
67.080.20)
MS 2249 : 2009 - Jagung sayur segar - Spesifikasi (RM20)
(ICS 67.080.20)
MS 2266 : 2009 - Fat and oil derivatives - Fatty acid methyl
esters (FAME) - Determination of methanol content (RM20) (ICS
67.200.10)
MS 2267 : 2009 - Fat and oil derivatives - Fatty acid methyl
esters (FAME) - Determination of free and total glycerol and
mono-, DI-, triglyceride contents (Reference method) (RM30) (ICS
67.200.10)
MS 2268 : 2009 - Fat and oil derivatives - Fatty acid methyl
esters (FAME) - Determination of acid value (RM20) (ICS
67.200.10)
MS 2269 : 2009 - Fat and oil derivatives - Fatty acid methyl
esters (FAME) - Determination of ester and linolenic acid methyl
ester content (RM20) (ICS 67.200.10)
MS 2274 : 2009 - Fat and oil derivatives - Fatty acid methyl
esters (FAME) - Determination of iodine value (RM20) (ICS
67.200.10)
71. Chemical Technology
MS 1042-2 :
2009 - Safety in laboratories - Code of practice - Part 2 :
Chemical aspects (First revision) (RM70) (ICS 71.040.10)
75. Petroleum and Related Technologies
MS 376 : 2010 -
Engine oils - Specification (Second revision) (RM40)
(ICS 75.100)
MS 2270 : 2009 - Test methods for lead in gasoline by x-ray
spectroscopy (RM40) (ICS 75.160.20)
MS 2271 : 2009 - Test method for sulfur in petroleum and
petroleum products by energy dispersive x-ray fluorescence
spectrometry (RM50) (ICS 75.160.20)
MS 2275 : 2009 - Diesel and domestic heating fuels -
Determination of cold filter plugging point (RM30) (ICS
75.160.20)
MS 2276 : 2009 - Liquid petroleum products - Determination of
contamination in middle distillates (RM10) (ICS
75.160.20)
MS ISO 3104 : 2009 - Petroleum products - Transparent and opaque
liquids - Determination of kinematic viscosity and calculation of
dynamic viscosity (RM170) (ICS 75.080)
MS ISO 20846 : 2009 - Petroleum products - Determination of
sulfur content of automotive fuels - Ultraviolet fluorescence
method (RM160) (ICS 75.080 / 75.160.30)
77. Metallurgy
MS 2245 : 2009
(P) - Rolled carbon steel for cold-finished steel bars (RM10) (ICS
77.140.65)
MS 2246 : 2009 (P) - Specification for deformed and plain
carbon-steel bars for concrete reinforcement (RM50) (ICS
77.140 / 77.140.15)
MS 2247 : 2009 (P) - Carbon steels for machine structural use
(RM20) (ICS 77.140 / 77.140.10)
MS EN 10025-1 : 2009 (P) - Hot rolled products of structural
steels - Part 1 : General technical delivery conditions (RM40) (ICS
77.140.10 / 77.140.50)
MS EN 10025-2 : 2009 (P) - Hot rolled products of structural
steels - Part 2 : Technical delivery conditions for non-alloy
structural steels (RM40) (ICS 77.140.10 / 77.140.45 /
77.140.50)
MS EN 10025-3 : 2009 (P) - Hot rolled products of
structural steels - Part 3 : Technical delivery conditions for
normalized / normalized rolled weldable fine grain structural
steels (RM30) (ICS 77.140.10 / 77.140.50)
MS EN 10025-4 : 2009 (P) - Hot rolled products of structural
steels - Part 4 : Technical delivery conditions for
thermomechanical rolled weldable fine grain structural steels
(RM30) (ICS 77.140.10 / 77.140.50)
MS EN 10025-5 : 2009 (P) - Hot rolled products of structural
steels - Part 5 : Technical delivery conditions for structural
steels with improved atmospheric corrosion resistance (RM30) (ICS
77.140.10 / 77.140.50)
MS EN 10025-6 : 2009 (P) - Hot rolled products of structural
steels - Part 6 : Technical delivery conditions for flat products
of high yield strength structural steels in the quenched and
tempered conditions (RM30) (ICS 77.140.10 / 77.140.50)
MS ISO 6508-1 : 2009 - Metallic materials - Rockwell hardness
test - Part 1 : Test method (scales A, B, C, D, E, F, G, H, K, N,
T) (First revision) (RM240) (ICS 77.040.10)
MS ISO 6508-2 :
2009 - Metallic materials - Rockwell hardness test - Part 2 :
Verification and calibration of testing machines (scales A, B, C,
D, E, F, G, H, K, N, T) (First revision) (RM200) (ICS
77.040.10)
MS ISO 6508-3 :
2009 - Metallic materials - Rockwell hardness test - Part 3 :
Calibration of reference blocks (scales A, B, C, D, E, F, G, H,
K, N, T) (First revision) (RM160) (ICS 77.040.10)
81. Glass and Ceramics Industries
MS 1817 : 2009
- Ceramic tableware - Specification (First revision) (RM20) (ICS
67.250 / 81.040.30 / 81.060.20 / 97.040.60)
MS ISO 20502 :
2009 - Fine ceramics (advanced ceramics, advanced technical
ceramics) - Determination of adhesion of ceramic coatings by
stratch testing (First revision) (RM260) (ICS 81.060.30)
MS ISO 26423 : 2009 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of coating thickness by
crater-grinding method (RM180) (ICS 81.060.30)
MS ISO 26424 : 2009 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Determination of the abrasion resistance of
coatings by a micro-scale abrasion test (RM180) (ICS
81.060.30)
MS ISO 26443 : 2009 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Rockwell indentation test for evaluation of
adhesion of ceramic coatings (RM110) (ICS 81.060.30)
MS ISO 26602 : 2009 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Silicon nitride materials for rolling
bearing balls (RM130) (ICS 81.060.30)
83. Rubber and Plastics Industries
MS ISO 815-1 : 2009 - Rubber, vulcanized or thermoplastic
- Determination of compression set - Part 1 : At ambient or
elevated temperatures (First revision) (RM20) (ICS
83.060)
MS ISO 815-2 : 2009 - Rubber, vulcanized or thermoplastic
- Determination of compression set - Part 2 : At low temperatures
(First revision) (RM20) (ICS 83.060)
85. Paper Technology
MS ISO 217 : 2009 - Paper - Untrimmed sizes - Designation
and tolerances for primary and supplementary ranges and
indication of machine direction (RM100) (ICS 85.060)
MS ISO 302 : 2009 - Pulps - Determination of Kappa number
(RM140) (ICS 85.040)
MS ISO 638 : 2009 - Paper, board and pulps -
Determination of dry matter content - Oven-drying method (First
revision) (RM110) (ICS 85.060 / 85.040)
MS ISO 2470-2 : 2009 - Paper, board and pulps -
Measurement of diffuse blue reflectance factor - Part 2 : Outdoor
daylight conditions (D65 brightness) (RM130) (ICS 85.060
/ 85.040)
MS ISO 3036 : 2009 - Board - Determination of puncture
resistance (RM100) (ICS 85.060)
MS ISO 5631-2 : 2009 - Paper and board - Determination of
colour by diffuse reflectance - Part 2 : Outdoor daylight
conditions (D65/10°) (RM140) (ICS 85.060)
MS ISO 5631-3 : 2009 - Paper and board - Determination of
colour by diffuse reflectance - Part 3 : Indoor illumination
conditions (D50/2°) (RM140) (ICS 85.060)
MS ISO 8254-1 : 2009 - Paper and board - Measurement of
specular gloss - Part 1 : 75° gloss with a converging beam,
TAPPI method (RM140) (ICS 85.060)
MS ISO 22754 : 2009 - Pulp and paper - Determination of
the effectice residual ink concentration (ERIC number) by
infrared reflectance measurement (RM140) (ICS 85.060 /
85.040)
91. Construction Materials and
Building
MS 1390 : 2010 -
Glass-fibre reinforced polyester panels and panel water tanks -
Specification (First revision) (RM50) (ICS 91.140.60)
MS 2258 : 2009 - Quicklime, hydrated lime, putty lime and
limestone for chemical and industrial uses - Specification (RM10)
(ICS 91.100.10)
MS 62054-21 : 2009 - Electricity metering (a.c.) - Tariff and
load control - Part 21 : Particular requirements for time
switches (Second revision) (RM20) (ICS 91.140.50)
MS 62059-41 : 2009 - Electricity metering equipment -
Dependability - Part 41 : Reliability prediction (RM220) (ICS
91.140.50)
MS IEC 60364-7-710 : 2009 - Electrical installations of buildings
- Part 7-710 : Requirements for special installations or
locations - Medical locations (RM190) (ICS 29.020 /
91.140.50)
MS IEC 62053-52 : 2009 - Electricity metering equipment (a.c.) -
Particular requirements - Part 52 : Symbols (Second revision)
(RM170) (ICS 17.220.20 / 91.140.50)
93. Civil
Engineering
MS 2318 : 2010 (P) - Demolition of buildings - Code of practice
(First revision) (RM150) (ICS 93.020)
97. Domestic and Commercial Equipment. Entertainment. Sports
MS 1817 : 2009 - Ceramic tableware - Specification (First
revision) (RM20) (ICS 67.250 / 81.040.30 / 81.060.20 /
97.040.60)