NEWLY PUBLISHED MALAYSIAN STANDARDS - MARCH 2009
01. Generalities. Terminology.
Standardization
MS IEC 60050-426 : 2008 -
International electrotechnical vocabulary - Part 426 : Equipment
for explosive atmospheres (First revision) (RM490) (ICS
01.040.29 / 29.020 / 29.260.20)
MS ISO 8330 : 2008 -
Rubber and plastics hoses and hose assemblies - Vocabulary (First
revision) (RM140) (ICS 01.040.23 / 23.040.70)
03. Sociology. Services. Company Organizations and Management.
Administration. Transport
MS ISO 24802-2 : 2008 -
Recreational diving services - Safety related minimum
requirements for the training of scuba instructors - Part 2 :
Level 2 (RM140) (ICS 03.080.30 / 03.100.30 / 03.200)
13. Environment and Health Protection. Safety
MS ISO 9169 : 2008 - Air
quality - Definition and determination of performance
characteristics of an automatic measuring system (RM260) (ICS
13.040.01)
17. Metrology and Measurement. Physical Phenomena
MS IEC 60051-2 : 2008 -
Direct acting indicating analogue electrical measuring
instruments and their accessories - Part 2 : Special requirements
for ammeters and voltmeters (First revision) (RM120) (ICS
17.220.20)
MS IEC 60051-3 : 2008 -
Direct acting indicating analogue electrical measuring
instruments and their accessories - Part 3 : Special requirements
for wattmeters and varmeters (First revision) (RM130) (ICS
17.220.20)
MS IEC 60051-4 : 2008 -
Direct acting indicating analogue electrical measuring
instruments and their accessories - Part 4 : Special requirements
for frequency meters (First revision) (RM100) (ICS 17.220.20)
MS IEC 60051-5 : 2008 -
Direct acting indicating analogue electrical measuring
instruments and their accessories - Part 5 : Special requirements
for phase meters, power factor meters and synchroscopes (First
revision) (RM110) (ICS 17.220.20)
19. Testing
MS IEC 60068-2-17 : 2008
- Basic environmental testing procedures - Part 2-17 : Tests -
Test Q : Sealing (RM420) (ICS 19.040)
MS IEC 60068-2-18 : 2008 - Basic environmental testing procedures
- Part 2-18 : Tests - Test R and Guidance: Water (RM330) (ICS
19.040)
23. Fluid Systems and Components for General Use
MS 1757 : Part 1 : 2008 - Chlorinated poly (vinyl
chloride) (PVC-C) plastic piping system - Part 1 : Specification
for schedules 40 and 80 pipes (RM20)
(ICS 23.040.20)
MS ISO 3994 : 2008 -
Plastics hoses - Helical - Thermoplastics - Reinforced
thermoplastics hoses for suction and discharge of aqueous
materials - Specification (RM170) (ICS 23.040.70)
MS ISO 7233 : 2008 - Rubber and plastics hoses and hose
assemblies - Determination of resistance to vacuum (RM110) (ICS
23.040.70)
MS ISO 8029 : 2008 - Plastics hose - General - purpose
collapsible water hose, textile-reinforced - Specification
(RM160) (ICS 23.040.70)
MS ISO 8308 : 2008 - Rubber and plastics hoses and tubing -
Determination of transmission of liquids through hose and tubing
walls (RM130) (ICS 23.040.70)
MS ISO 8330 : 2008 - Rubber and plastics hoses and hose
assemblies - Vocabulary (First revision) (RM140) (ICS
01.040.23 / 23.040.70)
MS ISO 11114-2 : 2008 - Transportable gas cylinders -
Compatibility of cylinder and valve materials with gas contents -
Part 2 : Non-metallic materials (RM180) (ICS 23.020.30)
MS ISO 13341 : 2008 - Transportable gas cylinders - Fitting of
valves to gas cylinders (RM130) (ICS 23.020.30)
25. Manufacturing Engineering
MS ISO 14343 : 2008 - Welding consumables - Wire
electrodes, strip electrodes, wires and rods for fusion welding
of stainless and heat resisting steels - Classification (Second
revision) (RM20) (ICS 25.160,20)
29. Electrical Engineering
MS IEC 60050-426 : 2008 -
International electrotechnical vocabulary - Part 426 : Equipment
for explosive atmospheres (First revision) (RM490) (ICS
01.040.29 / 29.020 / 29.260.20)
MS IEC 60079-1 : 2008 -
Explosive atmospheres - Part 1 : Equipment protection by
flameproof enclosures "d" (Second revision) (RM490)
(ICS 29.260.20)
MS IEC 60079-14 : 2008 - Explosive atmospheres - Part 14 :
Electrical installations design, selection and erection (First
revision) (RM540) (ICS 29.260.20)
MS IEC 60079-17 : 2008 - Explosive atmospheres - Part 17 :
Electrical installations inspection and maintenance (First
revision) (RM330) (ICS 29.260.20)
35. Information Technology. Office machines
MS ISO/IEC 7480 : 2008 -
Information technology - Telecommunications and information
exchange between systems - Start-stop transmission signal quality
at DTE/DCE interfaces (First revision) (RM140) (ICS
35.100.10)
MS ISO/IEC 7776 : 2008 - Information technology -
Telecommunications and information exchange between systems -
High-level data link control procedures - Description of the X.25
LAPB - Compatible DTE data link procedures (First revision)
(RM290) (ICS 35.100.20)
MS ISO/IEC 7812-1 : 2008 - Identification cards - Identification
of issuers - Part 1 : Numbering system (Second revision) (RM130) (ICS
35.240.15)
MS ISO/IEC 7812-2 : 2008 - Identification cards - Identification
of issuers - Part 2 : Application and registration procedures
(Second revision) (RM230) (ICS 35.240.15)
MS ISO/IEC 8208 : 2008 - Information technology - Data
communications - X.25 packet layer protocol for data terminal
equipment (First revision) (RM500) (ICS 35.100.30)
MS ISO/IEC 10373-1 : 2008 - Identification cards - Test methods -
Part 1 : General characteristics (First revision) (RM230) (ICS
35.240.15)
MS ISO/IEC 10373-2 : 2008 - Identification cards - Test methods -
Part 2 : Cards with magnetic stripes (First revision) (RM250) (ICS
35.240.15)
MS ISO/IEC 10373-5 : 2008 - Identification cards - Test methods -
Part 5 : Optical memory cards (First revision) (RM160) (ICS
35.240.15)
MS ISO/IEC 14598-6 : 2008
- Software engineering - Product evaluation - Part 6 :
Documentation of evaluation modules (RM260) (ICS 35.080)
MS ISO/IEC 15504-5 : 2008 - Information technology - Process
assessment - Part 5 : An exemplar process assessment model
(RM500) (ICS 35.080)
MS ISO/IEC 19785-3 : 2008 - Information technology - Common
biometric exchange formats framework - Part 3 : Patron format
specifications (RM380) (ICS 35.040)
MS ISO/IEC 19794-7 : 2008 - Information technology - Biometric
data interchange formats - Part 7 - Signature / sign time series
data (RM230) (ICS 35.040)
MS ISO/IEC 19794-10 : 2008 - Information technology - Biometric
data interchange formats - Part 10 - Hand geometry silhoutte data
(RM230) (ICS 35.040)
MS ISO/IEC 19795-2 : 2008 - Information technology - Biometric
performance testing and reporting - Part 2 : Testing
methodologies for technology and scenario evaluation (RM300)
(ICS 35.040)
MS ISO/IEC 24713-1 : 2008 - Information technology - Biometric
profiles for interoperability and data interchange - Part 1 :
Overview of biometric systems and biometric profiles (RM200) (ICS
35.040)
59. Textile and Leather Technology
MS ISO 11857 : 2008 -
Textile floor coverings - Determination of resistance to
delamination (RM100) (ICS 59.080.60)
MS ISO 11858 : 2008 - Textile floor coverings - Determination of
friability of attached foams (RM110) (ICS 59.080.60)
MS ISO 11859 : 2008 - Textile floor coverings - Pure wool,
hand-knotted pile carpets - Specification (RM100) (ICS
59.080.60)
MS ISO 11860 : 2008 -Textile floor coverings - Jute carpet
backing fabric - Specification (RM110) (ICS 59.080.60)
MS ISO 11861 : 2008 - Textile floor coverings - Coir mats - Types
and specification (RM100) (ICS 59.080.60)
MS ISO 12951 : 2008 - Textile floor coverings - Determination of
mass loss using the lisson test (RM200) (ICS 59.080.60)
MS ISO 13746 : 2008 - Textile floor coverings - Guidelines for
installation and use on stairs (RM100) (ICS 59.080.60)
MS ISO 13747 : 2008 - Textile floor coverings - Determination of
size, squareness and straightness of edge of tiles (RM130) (ICS
59.080.60)
MS ISO 13750 : 2008 - Textile floor coverings - Determination of
resistance to staining by acid food colours (RM110) (ICS
59.080.60)
MS ISO 17504 : 2008 - Textile floor coverings - Determination of
wool fibre integrity using an abrasion machine (RM110) (ICS
59.080.60)
65. Agriculture
MS 382 : 2008 - Technical malathion for
insecticidal preparations - Specification (First revision) (RM30)
(ICS 65.100)
67. Food Technology
MS 1798 : 2008 - Milk and
milk products - Specification of mojonnier - Type fat extraction
flasks (RM10) (ICS 67.260 / 67.100.01)
71. Chemical Technology
MS 995 : 2008 - Boron
timber preservatives - Specification (First revision) (RM10) (ICS
71.100.50)
77. Metallurgy
MS ISO 2232 : 2008 -
Round drawn wire for general purpose non-alloy steel wire ropes
and for large diameter steel wire ropes - Specifications (First
revision) (RM160) (ICS 77.140.65)
81. Glass and Ceramics Industries
MS ISO 15490 : 2008 -
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Test method for tensile strength of monolithic ceramics at room
temperature (First revision) (RM140) (ICS 81.060.30)
MS ISO 17561 : 2008 -
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Test method for elastic moduli of monolithic ceramics at room
temperature by sonic resonance (RM140) (ICS 81.060.30)
MS ISO 17565 : 2008 - Fine ceramics (advanced ceramics, advanced
technical ceramics) - Test method for flexural strength of
monolithic ceramics at elevated temperature (RM240) (ICS
81.060.30)
MS ISO 18756 : 2008 - Fine ceramics (advanced ceramics, advanced
technical ceramics - Determination of fracture toughness of
monolithic ceramics at room temperature by the surface crack in
flexure (SCF) method (RM260) (ICS 81.060.30)
MS ISO 22197-1 : 2008 - Fine ceramics (advanced ceramics,
advanced technical ceramics) - Test method for air-purification
performance of semiconducting photocatalytic materials - Part 1 :
Removal of nitric oxide (RM160) (ICS 81.060.30)
MS ISO 23145-1 : 2008 - Fine ceramics (advanced ceramics,
advanced technical ceramics) - Determination of bulk density of
ceramics powders - Part 1 : Tap density (RM110) (ICS
81.060.30)
83. Rubber and Plastics Industries
MS 1405 : 2008 - Coding
system for plastics products (First revision) (RM10) (ICS
83.080.01)
MS 1478 : 2008 - Plastics
- Low-density polyethylene films for general use and packaging
applications - Specification (First revision) (RM20) (ICS
83.140.10)
MS ISO 2878 : 2008 - Rubber - Antistatic and conductive products
- Determination of electrical resistance (RM110) (ICS 83.060)
MS ISO 3865 : 2008 - Rubber, vulcanized or thermoplastic -
Methods of test for staining in contact with organic materials
(First revision) (RM140) (ICS 83.060)
MS ISO 18899 : 2008 -
Rubber - Guide to the calibration of test equipment (RM180) (ICS
83.060)
85. Paper Technology
MS ISO 216 : 2008 -
Writing paper and certain classes of printed matter - Trimmed
sizes - A and B series and indication of machine direction
(RM140)
(ICS 85.080.10)
MS ISO 1924-3 : 2008 - Paper and board - Determination of tensile
properties - Part 3 : Constant rate of elongation method (100
mm/min) (RM140) (ICS 85.060)
MS ISO 3037 : 2008 - Corrugated fibreboard - Determination of
edgewise crush resistance (unwaxed edge method) (RM110) (ICS
85.060)
MS ISO 8791-4 : 2008 - Paper and board - Determination of
roughness / smoothness (air leak methods) - Part 4 : Print-surf
method (RM230) (ICS 85.060)
MS ISO 11093-5 : 2008 - Paper and board - Testing of cores - Part
5 : Determination of characteristics of concentric rotation
(RM80) (ICS 85.060)
MS ISO 11093-6 : 2008 - Paper and board - Testing of cores - Part
6 : Determination of bending strength by the three-point method
(RM100) (ICS 85.060)
MS ISO 11093-7 : 2008 - Paper and board - Testing of cores - Part
7 : Determination of flexural modulus by the three-point method
(RM130) (ICS 85.060)
MS ISO 11093-8 : 2008 - Paper and board - Testing of cores - Part
8 : Determination of natural frequency and flexural modulus by
experimental modal analysis (RM110) (ICS 85.060)
MS ISO 17812 : 2008 - Paper, board
and pulps - Determination of total magnesium, total calcium,
total manganese, total iron and total copper (RM130) (ICS
85.040 / 85.060)
MS ISO 22891 : 2008 - Paper - Determination of transmittance by
diffuse reflectance measurement (RM140) (ICS 85.060)
MS ISO 23714 : 2008 -
Pulps - Determination of water retention value (WRV) (RM130) (ICS
85.040)
97. Domestic and Commercial Equipment. Entertaintment. Sports.
MS ISO 24341 : 2008 -
Resilient and textile floor coverings - Determination of length,
width and straightness of sheet (RM110) (ICS 97.150)