NEWLY PUBLISHED MALAYSIAN STANDARDS - NOVEMBER 2008
01. Generalities, Terminology,
Standardization.
MS 1880 : Part 4 : 2005 -
Soil quality - Vocabulary - Part 4 : Terms and definitions
related to the rehabilitation of soils and sites (RM30) (ICS
13.080.01 / 01.040.13)
MS ISO 1081 : 2008 - Belt drives - V-belts and V-ribbed belts and
corresponding grooved pulleys - Vocabulary (RM20) (ICS
43.060.10 / 01.040.21 / 21.220.10)
MS ISO 4225 : 2008 - Air quality - General aspects - Vocabulary
(RM160) (ICS 13.040.10 / 01.040.13)
MS ISO 5288 : 2008 - Synchronous belt drives - Vocabulary (RM20) (ICS
43.060.10 / 01.040.21 / 21.220.10)
MS ISO 6813 : 2008 - Road vehicles - Collision classification
- Terminology (RM20) (ICS 01.040.43 / 43.020)
MS ISO 16020 : 2007 - Steel for the reinforcement and
prestressing of concrete - Vocabulary - (RM20) (ICS 01.040.77
/ 77.140.15)
03. Sociology. Services. Company organization and Management.
Administration. Transport
MS ISO 10002 : 2004 -
Quality management - Customer satisfaction - Guidelines for
complaints handling in organizations (RM30) (ICS 03.120.10)
MS ISO 10014 : 2006 - Quality management - Guidelines for
realizing financial and economic benefits (RM40) (ICS
03.120.10)
MS ISO 10019 : 2005 - Guidelines for the selection of quality
management system consultants and use of their services (RM20) (ICS
03.100.30 / 03.120.10)
MS ISO 24801-1 : 2008 - Recreational diving services - Safety
related minimum requirements for the training of recreational
scuba divers - Part 1 : Level 1 : Supervised diver (RM160) (ICS
03.080.30 / 03.200)
MS ISO 24801-2 : 2008 - Recreational diving services - Safety
related minimum requirements for the training of recreational
scuba divers - Part 2 : Level 2 : Autonomous diver (RM170) (ICS
03.080.30 / 03.200)
MS ISO 24801-3 : 2008 - Recreational diving services - Safety
related minimum requirements for the training of recreational
scuba divers - Part 3 : Level 3 : Dive leader (RM160) (ICS
03.080.30 / 03.200)
MS ISO 24802-1 : 2008 - Recreational diving services - Safety
related minimum requirements for the training of scuba
instructors - Part 1 : Level 1 (RM120) (ICS 03.080.30 /
03.100.30 / 03.200)
MS ISO 24803 : 2008 - Reacreational diving services -
Requirements for recreational scuba diving service providers
(RM120) (03.080.30 / 03.200)
11. Health Care Technology
MS 1949 : 2007 - Sterile
drainage catheters and accesory devices for single use (RM10) (ICS
11.040.20)
MS 1950 : 2007 - Catheters other than intravascular catheters -
Test methods for common properties (RM10) (ICS 11.040.20)
MS 1927 : Part 3 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 3 : Paper for
use in the manufacture of paper bags and in the manufacture of
pouches and reels - Requirements and test methods (RM20) (ICS
11.080.30 / 55.040)
MS 1927 : Part 4 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 4 : Paper bags
- Requirements and test methods (RM10) (ICS 11.080.30 /
55.040 / 55.080)
MS 1927 : Part 5 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 5 : Heat and
self-sealable pouches and reels of paper and plastic film
construction - Requirements and test methods (RM20) (ICS
11.080.30 / 55.040 / 55.080)
MS 1927 : Part 6 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 6 : Paper for
the manufacture of packs for medical use for sterilization by
ethylene oxide or irradiation - Requirements and test methods
(RM10) (ICS 11.080.30 / 55.040)
MS 1927 : Part 7 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 7 : Adhesive
coated paper for the manufacture of heat sealable packs for
medical use for sterilization by ethylene oxide or iradiation -
Requirements and test methods (RM20) (ICS 11.080.30 / 55.040)
MS 1927 : Part 8 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 8 : Re-usable
sterilization containers for steam sterilizers - Requirements and
test methods (RM20) (ICS 11.080.30 / 55.120)
MS 2060 : 2008 - Small steam sterilizers (RM80) (ICS
11.080.10)
MS ISO 5356-1 : 2008 - Anaesthetic and respiratory equipment -
Conical connectors - Part 1 : Cones and sockets (RM180) (ICS
11.040.10)
MS ISO 5356-2 : 2008 - Anaesthetic and respiratory equipment -
Conical connectors - Part 2 : Screw-threaded weight - bearing
connectors (RM90) (ICS 11.040.10)
MS ISO 5362 : 2008 -
Anaesthetic reservoir bags (RM170) (ICS 11.040.10)
MS ISO 5364 : 2008 - Anaesthetic and respiratory equipment -
Oropharyngeal airways (RM140) (ICS 11.040.10)
MS ISO 5367 : 2008 - Breathing tubes intended for use with
anaesthetic apparatus and ventilators (RM190) (ICS 11.040.10)
MS ISO 8359 : 2008 - Oxygen concentrators for medical use -
Safety requirements (RM230) (ICS 11.040.10)
MS ISO 8835-4 : 2008 - Inhalational anaesthesia systems - Part 4
: Anaesthetic vapour delivery devices (RM190) (ICS 11.040.10)
MS ISO 8835-5 : 2008 - Inhalational anaesthesia systems - Part 5
: Anaesthetic ventilators (RM180) (ICS 11.040.10)
MS ISO 9360-1 : 2008 - Anaesthetic and respiratory equipment -
Heat and moisture exchangers (HMEs) for humidifying respired
gases in humans - Part 1 : HMEs for use with minimum tidal volume
of 250 ml (RM210) (ICS 11.040.10)
MS ISO 21647 : 2008 - Medical electrical equipment - Particular
requirements for the basic safety and essential performance of
respiratory gas monitors (RM280) (ICS 11.040.10)
13. Environment. Health Protection. Safety
MS 1488 : 2006 -
Firefighting hoses - Semi-rigid hoses for fixed systems (RM30) (ICS
13.220.10)
MS 1746 : Part 1 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 1 : General
requirements (First revision) (RM400) (ICS 13.220.10)
MS 1746 : Part 8 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 8 : HFC 125
extinguishant (First revision) (RM120) (ICS 13.220.10)
MS 1746 : Part 9 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 9 : HFC 227EA
extinguishant (First revision) (RM120) (ICS 13.220.10)
MS 1746 : Part 10 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 10 : HFC 23
extinguishant (First revision) (RM120) (ICS 13.220.10)
MS 1746 : Part 11 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 11 : HFC 236FA
extinguishant (First revision) (RM120) (ICS 13.220.10)
MS 1746 : Part 12 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 12 : IG-01
extinguishant (First revision) (RM120) (ICS 13.220.10)
MS 1746 : Part 13 : 2008 - Gaseous fire-extinguishing systems -
Physical properties and system design - Part 13 : IG-100
extinguishant (First revision) (RM110) (ICS 13.220.10)
MS 1880 : Part 4 : 2005 - Soil quality - Vocabulary - Part 4 :
Terms and definitions related to the rehabilitation of soils and
sites (RM30) (ICS 13.080.01 / 01.040.13)
MS 1963 : 2007 - Air quality - Determination of odour
concentration by dynamic olfactometry (RM90) (ICS 13.040.99)
MS 2070 : Part 2 : 2008 - Scheduled waste - Sampling technical
guide - Part 2 : Description of media and device selection guide
(RM20) (ICS 13.060)
MS 2072 : 2008 - Guidelines for developing and implementing early
action for site remediation (RM20) (ICS 13.030)
MS 2073 : 2008 - Eco-labelling criteria for environmentally
degradable plastics packaging material (RM10) (ICS 13.020.50)
MS 2076 : 2008 - Practice for sampling with a scoop (RM40) (ICS
13.030.40)
MS 2077 : 2008 - Practice for sampling with a dipper or pond
sampler (RM40) (ICS 13.030.40)
MS 2078 : 2008 - Practice for sampling single or multilayered
liquids with or without solids, in drums or similar containers
(RM50) (ICS 13.030.40)
MS 2079 : 2008 - Practice for decontamination of field equipment
used at waste sites (RM50) (ICS 13.030.40)
MS 2080 : 2008 -
Eco-labelling criteria for recycled paper (RM10) (ICS
13.020.50)
MS IEC 60364-4-41 : 2007 - Low-voltage electrical
installations - Part 4-41 : Protection for safety - Protection
against electric shock (Second revision) (RM40) (ICS
13.260 / 91.140.50)
MS IEC 60364-5-51 : 2007 - Electrical installations of buildings
- Part 5-51 : Selection and erection of electrical equipment -
Common rules (Second revision) (RM50) (ICS 13.260 /
91.140.50)
MS ISO 4225 : 2008 -
Air quality - General aspects - Vocabulary (RM160) (ICS
13.040.10 / 01.040.13)
MS ISO 4226 : 2008 - Air quality - General aspects - Units of
measurement (RM80) (ICS 13.040)
MS ISO 7730 : 2007 -
Ergonomics of the thermal environment - Analytical determination
and interpretation of thermal comfort using calculation of the
PMV and PPD indices and local thermal comfort criteria (RM330 )(ICS
13.180)
MS ISO 7731 : 2007 - Ergonomic - Danger signals for public and
work areas - Auditory danger signals (RM190) (ICS 13.180)
MS ISO 7933 : 2007 - Ergonomics of the thermal environment -
Analytical determination and interpretation of heat stress using
calculation of the predicted heat strain (RM270) (ICS 13.180)
MS ISO 8756 : 2008 - Air quality - Handling of temperature,
pressure and humidity data (RM90) (ICS 13.040.10)
MS ISO 8996 : 2007 - Ergonomics of the thermal environment -
Determination of metabolic rate (RM230) (ICS 13.180)
MS ISO 9241-100 : 2007 - Ergonomics of human-system interaction -
Part 110 : Dialogue principles (RM220) (ICS 13.180)
MS ISO 9241-400 : 2007 - Ergonomics of human-system interaction -
Part 400 : Principles and requirements for physical input devices
(RM270) (ICS 13.180)
MS ISO 9355-3 : 2007 - Ergonomic requirements for the design of
displays and control actuators - Part 3 : Control actuators
(RM270) (ICS 13.180)
MS ISO 9886 : 2007 - Ergonomics - Evaluation of the thermal
strain by physiological measurements (RM220) (ICS 13.180)
MS ISO 9921 : 2007 - Ergonomics - Assessment of speech
communication (RM240) (ICS 13.180)
MS ISO 10703 : 2005 - Water quality - Determination of the
activity concentration of radionuclides by high resolution
gamma-ray spectrometry (RM180) (ICS 13.060.01, 13.280)
MS ISO 11064-7 : 2007 - Ergonomic design of control centres -
Part 7 - Principles for the evaluation of control centres (RM210)
(ICS 13.180)
MS ISO 13849-1 : 2008 -
Safety of machinery - Safety - Related parts of control systems -
Part 1 : General principles for design (First revision) (RM400) (ICS
13.110)
MS ISO 13850 : 2008 - Safety of machinery - Emergency stop -
Principles for design (First revision) (RM110) (ICS 13.110)
MS ISO 13856-3 : 2008 - Safety of machinery - Pressure-sensitive
protective devices - Part 3 : General principles for the design
and testing of pressure - sensitive bumpers, plates, wires and
similar devices (RM330) (ICS 13.110)
MS ISO 15536-1 : 2007 - Ergonomics - Computer manikins and body
templates - Part 1 : General requirements (RM160) (ICS
13.180)
MS ISO 15536-2 : 2007 - Ergonomics - Computer manikins and body
templates - Part 2 : Verification of functions and validation of
dimensions for computer manikin systems (RM190) (ICS 13.180)
MS ISO/TS 16071 : 2007 -
Ergonomics of human-system interaction - Guidance on
accessibility for human-computer interfaces (RM240) (ICS
13.180)
21. Mechanical Systems and Components for General Use.
MS ISO 606 : 2008 -
Short-pitch transmission precision roller and bush chains,
attachments and associated chain sprockets (Second revision)
(RM240) (ICS 21.220.30)
MS ISO 1081 : 2008 - Belt drives - V-belts and V-ribbed belts and
corresponding grooved pulleys - Vocabulary (RM20) (ICS
43.060.10 / 01.040.21 / 21.220.10)
MS ISO 4161 : 2008 - Hexagon nuts with flange - Coarse thread
(RM110) (ICS 21.060.20)
MS ISO 4162 : 2008 - Hexagon flange bolts - Small series (RM120) (ICS
21.060.10)
MS ISO 5288 : 2008 - Synchronous belt drives - Vocabulary (RM20) (ICS
43.060.10 / 01.040.21 / 21.220.10)
MS ISO 5292 : 2008 - Belt drives - V-belts and V-ribbed belts
- Calculation of power ratings (RM80) (ICS 43.060.99 /
21.220.10)
MS ISO 8765 : 2008 - Hexagon head bolts with metric fine pitch
thread - Product grades A and B (RM160) (ICS 21.060.10)
MS ISO 15071 : 2008 - Hexagon bolts with flange - Small series -
Product Grade A (RM140) (ICS 21.060.10)
MS ISO 15072 : 2008 - Hexagon bolts with flange with metric fine
pitch thread - Small series - Product Grade A (RM140) (ICS
21.060.10)
23. Fluid Systems and Components for General Use
MS 831 : 2007 - Valves
for use in liquefied petroleum gas (LPG) cylinders -
Specification (First revision) (RM20) (ICS 23.060)
MS 1086 : Part 3 : 2008 - Polyethylene (PE) piping systems for
gaseous fuels supply - Part 3 : Fittings (RM30) (ICS
23.010.45 / 91.140.40)
MS 1086 : Part 4 : 2008 - Polyethylene (PE) piping systems for
gaseous fuels supply - Part 4 : Valves (RM20) (ICS 23.030.01/
91.140.40)
MS 1086 : Part 5 : 2008 - Polyethylene (PE) piping systems for
gaseous fuels supply - Part 5 : Fitness for purpose of the system
(RM10) (ICS 23.040.01 / 91.140.40)
MS 1086 : Part 6 : 2008 - Polyethylene (PE) piping systems for
gaseous fuels supply - Part 6 : Guidance for the assessment of
conformity (RM30) (ICS 01.010.23 / 23.040.01 / 91.140.40)
MS 2089 : 2008 - Plastics piping systems - Thermoplastics piping
systems for buried non-pressure applications - Test methods for
leaktightness of elastomeric sealing ring type joints (RM20)
(ICS 23.020)
MS 2090 : 2008 - Thermoplastics piping systems - End-load-bearing
joints between small diameter pressure pipes and fittings - Test
method for leaktightness under internal weater pressure,
including end thrust (RM10) (ICS 23.020)
MS ISO 1403 : 2007 - Rubber hoses, textile-reinforced, for
general-purpose water applications - Specification (RM90)
(ICS 23.040.70)
MS ISO 2398 : 2007 - Rubber hoses, textile-reinforced, for
compressed air - Specification (RM110) (ICS 23.040.70)
MS ISO 5774 : 2007 - Thermoplastics hoses - Textile -reinforced
types for compressed-air applications - Specification (RM170) (ICS
23.040.70)
MS ISO 6134 : 2007 - Rubber hoses and hose assemblies for
saturated steam - Specification (RM170) (ICS 23.040.70)
MS ISO 8033 : 2008 - Rubber and plastics hoses - Determination of
adhesion between components (RM160) (ICS 23.040.70)
MS ISO 13769 : 2008 - Gas cylinders - Stamp marking (RM140) (ICS
23.020.30)
29. Electrical Engineering
MS IEC 62305-2 :
2007 - Protection against lightning - Part 2 : Risk management
(First revision) (RM120) (ICS 91.120.40 / 29.020)
MS IEC 62305-3 : 2007 - Protection against lightning - Part 3 :
Physical damage to structures and life hazard (First revision)
(RM160) (ICS 91.120.40 / 29.020)
35. Information Technology. Office Machines
MS ISO/IEC 7811-1 :
2007 - Identification cards - Recording technique - Part 1 :
Embossing (Second revision) (RM220) (ICS 35.240.15)
MS ISO/IEC 7811-2 : 2007 - Identification cards -
Recording technique - Part 2 : Magnetic ctripe - Low coercivity
(Second revision) (RM220) (35.240.15)
MS ISO/IEC 7811-6 : 2007
- Identification cards - Recording technique - Part 6 : Magnetic
stripe - High coercivity (Second revision) (RM230) (ICS
35.240.15)
MS ISO/IEC 10118-1 : 2007
- Information technology - Security techniques - Hash-function -
Part 1 : General (RM120) (ICS 35.040)
MS ISO/IEC 10118-2 : 2007 - Information technology - Security
techniques - Hash-functions - Part 2 : Hash-functions using an
n-bit block cipher (RM210) (ICS 35.040)
MS ISO/IEC 10118-3 : 2007 - Information technology - Security
techniques - Hash-functions - Part 3 : Dedicated hash-functions
(RM400) (ICS 35.040)
MS ISO/IEC 10118-4 : 2007 - Information technology - Security
techniques - Hash-functions - Part 4 : Hash-functions using
modular arithmetic (RM220) (ICS 35.040)
MS ISO/IEC 10181-1 : 2007 - Information technology - Open systems
interconnection - Security frameworks for open systems : Overview
(RM210) (ICS 35.100.01)
MS ISO/IEC 10181-4 : 2007 - Information technology - Open systems
interconnection - Security frameworks for open systems :
Non-repudiation framework (RM220) (ICS 35.100.01)
MS ISO/IEC 12207 : 2007 - Information technology - Software Life
Cycle processes (First revision) (RM320) (ICS 35.080)
MS ISO/IEC 13335-1 : 2007 - Information technology - Security
techniques - Management of information and communications
technology security - Part 1 : Concepts and models for
information and communications technology security management
(RM240) (ICS 35.040)
MS ISO/IEC 14764 : 2007 - Software engineering - Software Life
Cycles processes - Maintenance (First revision) (RM290) (ICS
35.240.15)
MS ISO 19132 : 2008 - Geographic information - Location-based
services - Reference model (RM400) (ICS 35.240.70)
MS ISO 19136 : 2008- Geographic information - Geography Markup
Language (GML) (RM660) (ICS 35.240.70)
MS ISO 19137 : 2008 - Geographic information - Core profile of
the spatial schema (RM170) (ICS 35.240.70)
MS ISO/TS 19138 : 2008 - Geographic information - Data quality
measures (RM350) (ICS 35.240.70)
MS ISO/TS 19139 : 2008 - Geographic information - Metadata - XML
schema implementation (RM430) (ICS 35.240.70)
MS ISO/IEC 19784-1 : 2008 - Information technology - Biometric
application programming interface - Part 1 : BioAPI specification
(RM490) (ICS 35.040)
MS ISO/IEC 19784-2: 2008 - Information technology - Biometric
application programming interface - Part 2 : Biometric archive
function provider interface (RM230) (ICS 35.040)
MS ISO/IEC 19785-2 : 2008 - Information technology - Common
biometric exchange format framework - Part 2 : Procedures for the
operation of the biometric registration authority (RM180) (ICS
35.040)
MS ISO/IEC 19794-1 : 2008 - Information technology - Biometric
data interchange formats - Part 1 : Framework (RM180) (ICS
35.040)
MS ISO/IEC 19794-3 : 2008 - Information technology - Biometric
data interchange format - Part 3 : Finger pattern spectral data
(RM290) (ICS 35.040)
MS ISO/IEC 19794-4 : 2007 - Information technology - Biometric
data interchange formats - Part 4 : Finger image data (RM30) (ICS
35.040)
MS ISO/IEC 19794-5 : 2007 - Information technology - Biometric
data interchange formats - Part 5 : Face image data (RM60) (ICS
35.040)
MS ISO/IEC 19794-8 : 2008 - Information technology - Biometric
data interchange formats - Part 8 : Finger pattern skeletal data
(RM290) (ICS 35.040)
MS ISO/IEC 19794-9 : 2008 - Information technology - Biometric
data interchange formats - Part 9 : Vascular image data (RM180) (ICS
35.040)
MS ISO/IEC 24709 : Part 1 : 2008 - Information technology -
Conformance testing for the biometric application programming
interface (BioAPI) - Part 1 : Methods and procedures (RM600)
(ICS 35.040)
MS ISO/IEC 24709 : Part 2 : 2008 - Information technology -
Conformance testing for the biometric application programming
interface (BioAPI) - Part 2 : Test assertions for biometric
services providers (RM600) (ICS 35.040)
MS ISO/IEC 25051 : 2007 - Software engineering - Software product
quality requirements and evaluation (SQUARE) - Requirements for
quality of commercial off-the-shelf (COTS) software product and
instructions for testing (RM240) (ICS 35.080)
MS ISO/IEC 27006 : 2007 - Information technology - Security
techniques - Requirements for bodies providing audit and
certification of information security management systems (RM280)
(ICS 35.040)
39. Precision Mechanics. Jewellery
MS ISO 11489 : 2007 -
Determination of platinum in platinum jewellery alloys -
Gravimetric determination by reduction with mercury (I) chloride
(RM90) (ICS 39.060)
43. Road Vehicles Engineering
MS 1944 : Part 3 : 2008 -
Passenger cars - Test track for a severe lane-change manoeuvre -
Part 3 : Vehicle preparation prior to testing (RM10) (ICS
43.040.50)
MS 2082 : 2008 - Road vehicles - Braking systems - Temperature
measuring methods (RM20) (ICS 43.040.40)
MS ISO 1081 : 2008 - Belt drives - V-belts and V-ribbed belts and
corresponding grooved pulleys - Vocabulary (RM20) (ICS
43.060.10 / 01.040.21 / 21.220.10)
MS ISO 4928 : 2008 - Road vehicles - Elastomeric cups and seals
for cylinders for hydraulic braking systems using a non-petroleum
base hydraulic brake fluid (service temperature 120ºC max.)
(RM180) (ICS 43.040.40 / 83.140.50)
MS ISO 4930 : 2008 - Road
vehicles - Elastomeric seals for hydraulic disc brake cylinders
using a non-petroleum base hydraulic brake fluid (service
tempetaure 150ºC max. (RM140) (ICS 43.040.40 / 83.140.50)
MS ISO 5288 : 2008 -
Synchronous belt drives - Vocabulary (RM20) (ICS 43.060.10 /
01.040.21 / 21.220.10)
MS ISO 5292 : 2008 - Belt drives - V-belts and V-ribbed belts -
Calculation of power ratings (RM80) (ICS 43.060.99 /
21.220.10)
MS ISO 6118 : 2008 - Road
vehicles - Elastomeric cups and seals for cylinders for hydraulic
braking systems using a non-petroleum base hydraulic brake fluid
(service temperature 70ºC max.) (RM180) (ICS 43.040.40 /
83.140.50)
MS ISO 6119 : 2008 - Road vehicles - Elastomeric seals for
hydraulic disc brake cylinders using a non-petroleum base
hydraulic brake fluid (service temperature 120ºC max.) (RM140) (ICS
43.040.40 / 83.140.50)
MS ISO 6813 : 2008 - Road vehicles - Collision classification -
Terminology (RM20) (ICS 01.040.43 / 43.020)
55. Packaging and
Distrubution of Goods
MS 1927 : Part 3 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 3 : Paper for
use in the maufacture of paper bags and in the manufacture of
pouches and reels - Requirements and test methods (RM20) (ICS
11.080.30 / 55.040)
MS 1927 : Part 4 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 4 : Paper bags
- Requirements and test methods (RM10) (ICS 11.080.30 /
55.040 / 55.080)
MS 1927 : Part 5 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 5 : Heat and
self-sealable pouches and reels of paper and plastic film
construction - Requirements and test methods (RM20) (ICS
11.080.30 / 55.040 / 55.080)
MS 1927 : Part 6 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 6 : Paper for
the manufacture of packs for medical use for sterilization by
ethylene oxide or irradiation - Requirements and test methods
(RM10) (ICS 11.080.30 / 55.040)
MS 1927 : Part 7 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 7 : Adhesive
coated paper for the manufacture of heat sealable packs for
medical use for sterilization by ethylene oxide or iradiation -
Requirements and test methods (RM20) (ICS 11.080.30 / 55.040)
MS 1927 : Part 8 : 2007 - Packaging materials and systems for
medical devices which are to be sterilized - Part 8 : Re-usable
sterilization containers for steam sterilizers - Requirements and
test methods (RM20) (ICS 11.080.30 / 55.120)
59. Textile and Leather Technology
MS ISO 10319 : 2005 -
Geotextiles - Wide-width tensile test (RM20) (ICS 59.080.70)
65. Agriculture
MS ISO 16472 : 2007 - Animal feeding stuffs - Determination of
amylase-treated neutral detergent fibre content (aNDF) (RM180) (ICS
65.120)
MS ISO 17375 : 2007 - Animal feeding stuffs - Determination of
aflatoxin B1 (RM160) (ICS 65.120)
MS ISO/TS 17764-1 : 2007 - Animal feeding stuffs - Determination
of the content of fatty acids - Part 1 : Preparation of methyl
esters (RM110) (ICS 65.120)
MS ISO/TS 17764-2: 2007 - Animal feeding stuffs - Determination
of the content of fatty acids - Part 2 : Gas chromatographic
method (RM140) (ICS 65.120)
67. Food Technology
MS 2054 : 2007 -
Coriander (Coriandrum sativum L.), whole or ground (powdered) -
Specification (RM90) (ICS 67.220.10)
MS 2055 : 2007 - Fennel seed, whole or ground (powdered) - Part 1
: Bitter fennel seed (foeniculum vulgare P. miller var. vulgare)
- Specification (RM90) (ICS 67.220.10)
MS 2056 : 2007 - Fenugreek, whole or ground (powdered) -
Specification (RM90) (ICS 67.220.10)
MS 2062 : 2007 - Aniseed (pimpinella anisum linnaeus) -
Specification (RM90) (ICS 67.220.10)
MS ISO 882-2 : 2007 -
Cardamon [elettaria cardamomum (linnaeus) maton var. minuscula
burkill] - Specification - Part 2 : Seeds (RM90) (ICS
67.220.10)
MS ISO 3588 : 2007 -
Spices and condiments - Determination of degree of fineness of
grinding - Hand sieving method (Reference method) (RM80) (ICS
67.220.10)
MS ISO 11178 : 2007 - Star anise (Illicium verum hook. F.) -
Specification (RM120) (ICS 67.220.10)
MS ISO 13685 : 2007 - Ginger and its oleoresins - Determination
of the main pungent components (Gingerols and shagaols) - Method
using high-performance liquid chromatography (RM160) (ICS
67.220.10)
MS ISO 15303 : 2007 - Animal and vegetable fats and oils -
Detection and identification of a volatile organic contaminant by
GC/MS (RM140) (ICS 67.200.10)
MS ISO 15753 : 2007 - Animal and vegetable fats and oils -
Determination of polycyclic aromatic hydrocarbons (RM220) (ICS
67.200.10)
MS ISO 23275-1 : 2007 - Animal and vegetable fats and oils -
Cocoa butter equivalents in cocoa butter and plain chocolate -
Part 1 : Determination of the presence of cocoa butter
equivalents (RM160) (ICS 67.200.10)
MS ISO 23275-2 : 2007 - Animal and vegetable fats and oils -
Cocoa butter equivalents in cocoa butter and plain chocolate -
Part 2 : Quantification of cocoa butter equivalents (RM170)
(ICS 67.200.10)
71. Chemical Technology
MS ISO 2272 : 2007 -
Surface active agents - Soaps - Determination of low contents of
free glycerol by molecular absorption spectrometry (RM90) (ICS
71.100.40)
MS ISO 4318 : 2007 - Surface active agents and soaps -
Determination of water content - Azeotropic distillation method
(RM80) (ICS 71.100.40)
75. Petroleum and related technologies
MS 875 : 2008 - Test
method for sulfur in liquefied petroleum gases (Oxy-hydrogen
burner or lamp) (Second revision) (RM50) (ICS 75.160.30)
MS 2008 : 2008 - Automotive fuels - Palm methyl ester (PME) for
diesel engines - Requirements and test methods (RM20) (ICS
75.160.20)
MS 2063 : 2008 - Test method for hydrogen sulfide in liquefied
petroleum (LP) gases (Lead acetate method) (RM40) (ICS
75.160.30)
MS 2064 : 2008 - Test method for dryness of propane (valve freeze
method) (RM40) (ICS 75.160.30)
MS 2065 : 2008 - Test method for density or relative density of
light hydrocarbons by pressure hydrometer (RM40) (ICS
75.160.30)
MS 2066 : 2008 - Test method for determination of total volatile
sulfur in gaseous hyrocarbons and liquefied petroleum gases by
ultraviolet fluorescence (RM50) (ICS 75.160.30)
MS 2067 : 2008 - Test method for vapor pressure of liquefied
petroleum gases (LPG) (expansion method) (RM50) (ICS
75.160.30)
MS 2068 : 2008 - Test method for residues in liquefied petroleum
(LP) gases (RM50) (ICS 75.160.30)
MS 2071 : 2008 - Practice for obtaining LPG samples using a
floating piston cylinder (RM50) (ICS 75.160.30)
MS ISO 6978-1 : 2008 - Natural gas - Determination of mercury -
Part 1 : Sampling of mercury by chemisorption on iodine (First
revision) (RM180) (ICS 75.060)
MS ISO 6978-2 : 2008 - Natural gas - Determination of mercury -
Part 2 : Sampling of mercury by amalgamation on gold / platinum
alloy (First revision) (RM190) (ICS 75.060)
77. Metallurgy
MS ISO 6929 : 2007 -
Steel products - Definitions and classification (RM30) (ICS
77.080.20 / 77.140)
MS ISO 16020 : 2007 -
Steel for the reinforcement and prestressing of concrete -
Vocabulary - (RM20) (ICS 01.040.77 / 77.140.15)
MS ISO 16120-1 : 2008 -
Non-alloy steel wire rod for conversion to wire - Part 1 :
General requirements (First revision ) (RM20) (ICS 77.140.60)
MS ISO 16120-2 : 2008 - Non-alloy steel wire rod for conversion
to wire - Part 2 : Specific requirements for general purpose wire
rod (First revision ) (RM10) (ICS 77.140.60)
MS ISO 16120-3 : 2008 - Non-alloy steel wire rod for conversion
to wire - Part 3 : Specific requirements for rimmed and rimmed
substitute low carbon steel wire rod (First revision ) (RM10) (ICS
77.140.60)
MS ISO 16120-4 : 2008 - Non-alloy steel wire rod for conversion
to wire - Part 4 : Specific requirements for wire rod for special
applications (First revision ) (RM10) (ICS 77.140.60)
81. Glass and Ceramics Industries
MS ISO 20507 : 2008 -
Fine ceramics (Advaned ceramics, advanced technical ceramics) -
Vocabulary (RM260) (ICS 81.060.30)
MS ISO 20508 : 2008 - Fine ceramics (Advanced ceramics, advanced
technical ceramics) - Determination of light transmittance of
ceramic films with transparent substrate (RM90) (ICS
81.060.30)
MS ISO 24235 : 2008 - Fine ceramics (Advanced ceramics, advanced
technical ceramics) - Determination of particle size distribution
of ceramics powders by laser diffraction method (RM110) (ICS
81.060.30)
83. Rubber and Plastics Industries
MS 2047 : 2007 - Practice for determination of monomeric
plasticizers in poly (vinyl chloride) (PVC) by gas chromatography
(RM40) (ICS 83.080.20)
MS 2048 : 2007 - Test method for purity of monomeric plasticizers
by gas chromatography (RM40) (ICS 83.080.20)
MS 2049 : 2007 - Test method for residual vinyl chloride monomer
in poly (vinyl chloride) resins by gas chromatographic headspace
technique (RM40) (ICS 83.080.20)
MS 2069 : 2008 - Practice for determination of volatiles in
polymers by static headspace gas chromatography (RM40) (ICS
83.080.20)
MS 2083 : 2008 -
Adhesives - Wood-to-wood adhesive bonds - Determination of shear
strength by tensile loading (RM20) (ICS 83.180)
MS 2084 : 2008 - Adhesives - Wood-to-wood adhesive bonds -
Determination of shear strength by compressive loading (RM20)
(ICS 83.180)
MS 2088 : 2008 - Test method for susceptibility of polyethylene
bottles to soot accumulation (RM40) (ICS 83.080.01)
MS 2091 : 2008 - Specification for cautionary labelling for
five-gallon open-head plastic containers (RM40) (ICS
83.140.99)
MS 2092 : 2008 - Test method for determination of residual
acetaldehyde in polyethylene terephthalate bottle polymer using
an automated static head-space sampling device and a capillary GC
with a flame ionization detector (RM50) (ICS 83.140.99)
MS ISO 75-1 : 2007 - Plastics - Determination of temperature of
deflection under load - Part 1 : General test method (First
revision) (RM140) (ICS 83.080.01)
MS ISO 75-2 : 2007 - Plastics - Determination of temperature of
deflection under load - Part 2 : Plastics and ebonite (First
revision) (RM140) (ICS 83.080.01)
MS ISO 75-3 : 2007 - Plastics - Determination of temperature of
deflection under load - Part 3 : High-strength thermosetting
laminates and long-fibre-reinforced plastics (First revision)
(RM110) (ICS 83.080.01)
MS ISO 176 : 2008 - Plastics - Determination of loss of
plasticizers - Activated carbon method (First revision) (RM90) (ICS
83.080.01)
MS ISO 899-1 : 2007 - Plastics - Determination of creep behaviour
- Part 1 : Tensile creep (First revision) (RM180) (ICS
83.080.01)
MS ISO 899-2 : 2007 - Plastics - Determination of creep behaviour
- Part 2 : Flexural creep by three-point loading (First revision)
(RM170) (ICS 83.080.01)
MS ISO 1265 : 2007 - Plastics - Poly(vinyl chloride) resins -
Determination of number of impurities and foreign particles
(RM120) (ICS 83.080.20)
MS ISO 1269 : 2007 - Plastics - Homopolymer and copolymer resins
of vinyl chloride - Determination of volatile matter (including
water) (RM90) (ICS 83.080.20)
MS ISO 1624 : 2007 - Plastics - Vinyl chloride homopolymer and
copolymer resins - Sieve analysis in water (RM110) (ICS
83.080.20)
MS ISO 1628-3 : 2008 - Plastics - Determination of the viscosity
of polymers in dilute solution using capillary viscometers - Part
3 : Polyethylenes and polypropylenes (RM110) (ICS 83.080.20)
MS ISO 1628-4 : 2008 - Plastics - Determination of the viscosity
of polymers in dilute solution using capillary viscometers - Part
4 : Polycarbonate (PC) moulding and extrusion materials (RM140) (ICS
83.080.20)
MS ISO 1628-5 : 2008 - Plastics - Determination of the viscosity
of polymers in dilute solution using capillary viscometers - Part
5 : Thermoplastic polyester (TP) homopolymers and copolymers
(RM160) (ICS 83.080.10)
MS ISO 1628-6 : 2008 - Plastics - Determination of the viscosity
of polymers in dilute solution using capillary viscometers - Part
6 : Methyl methacrylate polymers (RM110) (ICS 83.080.20)
MS ISO 1872-2 : 2008 - Plastics - Polyethylene (PE) moulding and
extrusion materials - Part 2 : Preparation of test specimens and
determination of properties (RM120) (ICS 83.080.20)
MS ISO 2285 : 2007 - Rubber, vulcanized or thermoplastic -
Determination of tension set under constant elongation, and of
tension set, elongation and creep under constant tensile load
(Second revision) (RM140) (ICS 83.060)
MS ISO 2782 : 2007 - Rubber, vulcanized or thermoplastic -
Determination of permeability to gases (First revision) (RM170) (ICS
83.060)
MS ISO 2897-2 : 2007 - Plastics - Impact-resistant polystyrene
(PS-I) moulding and extrusion materials - Part 2 : Preparation of
test specimens and determination of properties (First revision)
(RM110) (ICS 83.080.01)
MS ISO 3219 : 2007 - Plastics - Polymers / resins in the liquid
state or as emulsions or dispersions - Determination of viscosity
using a rotational viscometer with defined shear rate (RM120) (ICS
83.080.20)
MS ISO 4928 : 2008 - Road vehicles - Elastomeric cups and seals
for cylinders for hydraulic braking systems using a non-petroleum
base hydraulic brake fluid (service temperature 120ºC max.)
(RM180) (ICS 43.040.40 / 83.140.50)
MS ISO 4930 : 2008 - Road vehicles - Elastomeric seals for
hydraulic disc brake cylinders using a non-petroleum base
hydraulic brake fluid (service temperature 150ºC max. (RM140)
(ICS 43.040.40 / 83.140.50)
MS ISO 6118 : 2008 - Road vehicles - Elastomeric cups and seals
for cylinders for hydraulic braking systems using a non-petroleum
base hydraulic brake fluid (service temperature 70ºC max.)
(RM180) (ICS 43.040.40 / 83.140.50)
MS ISO 6119 : 2008 - Road vehicles - Elastomeric seals for
hydraulic disc brake cylinders using a non-petroleum base
hydraulic brake fluid (service temperature 120ºC max.) (RM140) (ICS
43.040.40 / 83.140.50)
MS ISO 7391-2 : 2007 - Plastics - Polycarbonate (PC) moulding and
extrusion materials - Part 2 : Preparation of test specimens and
determination of properties (First revision) (RM110) (ICS
83.080.01)
MS ISO 14851 : 2008 - Determination of the ultimate aerobic
biodegradability of plastic materials in an aqueous medium -
Method by measuring the oxygen demand in a closed respirometer
(RM220) (ICS 83.080.01)
MS ISO 14852 : 2008 - Determination of the ultimate aerobic
biodegradability of plastic materials in an aqueous medium -
Method by analysis of evolved carbon dioxide (RM190) (ICS
83.080.01)
MS ISO 14855-1 : 2008 - Determination of the ultimate aerobic
biodegradability of plastic materials under controlled composting
conditions - Method by analysis of evolved carbon dioxide - Part
1 : General method (RM220) (ICS 83.080.01)
MS ISO 18517 : 2007 - Rubber,vulcanized or thermoplastics -
Hardness testing - Introduction and guide (RM110) (ICS
83.060)
MS ISO 22088-2 : 2007 - Plastics - Determination of resistance to
environmental stress cracking (ESC) - Part 2 : Constant tensile
load method (RM140) (ICS 83.080.01)
85. Paper Technology
MS ISO 2758 : 2007 -
Paper - Determination of bursting strength (RM160) (ICS
85.060)
MS ISO 2759 : 2007 - Board - Determinatin of bursting strength
(RM160) (ICS 85.060)
MS ISO 4119 : 2007 - Pulps - Determination of stock concentration
(RM90) (ICS 85.040)
MS ISO 9197 : 2007 - Paper, board and pulp - Determination of
eater-soluble chlorides (RM110) (ICS 85.060)
MS ISO 11093-1 : 2007 - Paper and board - Testing of cores - Part
1 : Sampling (RM80) (ICS 85.080)
MS ISO 11093-4 : 2007 - Paper and board - Testing of cores - Part
4 : Measurement of dimensions (RM140) (ICS 85.080)
MS ISO 13542 : 2007 - Paper and board - Specification for
internal diameter of cores for reels (RM80) (ICS 85.060)
87. Paint and Colour
Industries
MS 133 : Part
F6 : 2008 - Paints and varnishes - Natural weathering of coatings
- Part F6 : Exposure and assessment (First revision) (RM20) (ICS
87.040)
MS 133 : Part F19 : 2008 - Paints and varnishes - Determination
of resistance to cyclic corrosion conditions - Part F19 : Wet
(salt fog) / dry / humidity / UV light (RM20) (ICS
87.040)
MS 133 : Part G5 : 2008 - Paints and varnishes - Determination of
resistance to liquids - Part G5 : Immersion in liquids other than
water (First revision) (RM20) (ICS 87.040)
MS 133 : Part G7 : 2008 - Paints and varnishes - Part G7:
Determination of the effect of heat (RM10) (ICS 87.040)
MS 133 : Part G8 : 2008 - Paints and varnishes - Determination of
resistance to liquids - Part G8 : Water immersion method (RM10) (ICS
87.040)
MS 133 : Part G9 : 2008 - Paints and varnishes - Determination of
water-vapour transmission rate - Part G9: Disc method for free
films (RM20) (ICS 87.040)
MS 133 : Part H1 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H1: General introduction and designation system (First revision)
(RM10) (ICS 87.040)
MS 133 : Part H2 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H2: Assessment of degree of blistering (First revision) (RM20) (ICS
87.040)
MS 133 : Part H3 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H3: Assessment of degree of rusting (First revision) (RM20) (ICS
87.040)
MS 133 : Part H4 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H4: Assessment of degree of cracking (First revision) (RM20) (ICS
87.040)
MS 133 : Part H5 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H5: Assessment of degree of flaking (First revision) (RM10) (ICS
87.040)
MS 133 : Part H6 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H6: Assessment of degree of chalking by tape method (RM20) (ICS
87.040)
MS 133 : Part H7 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H7: Assessment of chalking by velvet method (RM10) (ICS
87.040)
MS 133 : Part H8 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H8: Assessment of degree of delamination and corrosion around a
scribe (RM20) (ICS 87.040)
MS 133 : Part H10 : 2008 - Paints and varnishes - Evaluation of
degradation of coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in appearance - Part
H10: Assessment of degree of filiform corrosion (RM10) (ICS
87.040)
MS 133 : Part J1 : 2008 - Paints and varnishes - Coating powders
- Part J1 : Determination of particle size distribution by
sieving (RM10) (ICS 87.040)
MS 133 : Part J2 : 2008 - Paints and varnishes - Coating powders
- Part J2 : Determination of density by gas comparison pyknometer
(referee method) (RM10) (ICS 87.040)
MS 133 : Part J3 : 2008 - Paints and varnishes - Coating powders
- Part J3 : Determination of density by liquid displacement
pyknometer (RM10) (ICS 87.040)
MS 133 : Part J4 : 2008 - Paints and varnishes - Coating powders
- Part J4 : Calculation of lower explosion limit (RM10)
(ICS 87.040)
MS 133 : Part J5 : 2008 - Paints and varnishes - Coating powders
- Part J5 : Determination of flow properties of a powder / air
mixture (RM10) (ICS 87.040)
MS 133 : Part J6 : 2008 - Paints and varnishes - Coating powders
- Part J6 : Determination of gel time of thermosetting coating
powders at a given temperature RM10) (ICS 87.040)
MS 133 : Part J7 : 2008 - Paints and varnishes - Coating powders
- Part J7 : Determination of loss of mass on stoving (RM10) (ICS
87.040)
MS 133 : Part J8 : 2008 - Paints and varnishes - Coating powders
- Part J8 : Assessment of the storage stability of thermosetting
powders (RM20) (ICS 87.040)
MS 133 : Part J9 : 2008 - Paints and varnishes - Coating powders
- Part J9 : Sampling (RM10) (ICS 87.040)
MS 133 : Part J10 : 2008 - Paints and varnishes - Coating powders
- Part J10 : Determination of deposition efficiency (RM10)
(ICS 87.040)
MS 133 : Part J11 : 2008 - Paints and varnishes - Coating powders
- Part J11 : Inclined-plane flow test (RM10) (ICS
87.040)
MS 133 : Part J12 : 2008 - Paints and varnishes - Coating powders
- Part J12 : Determination of compatibility (RM10) (ICS
87.040)
MS 133 : Part J13 : 2008 - Paints and varnishes - Coating powders
- Part J13 : Particle size analysis by laser diffraction (RM10) (ICS
87.040)
91. Construction Materials and Building
MS IEC 60364-1
: 2007 - Low-voltage electrical installations - Part 1 :
Fundamental principles, assessment of general characteristics,
definitions (Second revision) (RM50) (ICS 91.140.50)
MS IEC 60364-4-41 : 2007 - Low-voltage electrical installations -
Part 4-41 : Protection for safety - Protection against electric
shock (Second revision) (RM40) (ICS 13.260 / 91.140.50)
MS IEC 60364-4-44 : 2007 - Electrical installations of buildings
- Part 4-44 : Protection for safety - Protection against voltage
disturbances and electromagnetic disturbances (Second revision)
(RM50) (ICS 91.140.50)
MS IEC 60364-5-51 : 2007 - Electrical installations of buildings
- Part 5-51 : Selection and erection of electrical equipment -
Common rules (Second revision) (RM50) (ICS 13.260 /
91.140.50)
MS IEC 62305-2 : 2007 - Protection against lightning - Part 2 :
Risk management (First revision) (RM120) (ICS 91.120.40
/ 29.020)
MS IEC 62305-3 : 2007 - Protection against lightning - Part 3 :
Physical damage to structures and life hazard (First revision)
(RM160) (ICS 91.120.40 / 29.020)
97. Domestic and Commercial Equipment. Entertainment. Sports
MS IEC 60065 :
2007 - Audio, video and similar electronic apparatus - Safety
requirements (Second revision) (RM180) (ICS 97.020)
MS ISO 7175-1 : 2008 - Children's cots and folding cots for
domestic use - Part 1 : Safety requirements (RM20) (ICS
97.140)
MS ISO 7175-2 : 2008 - Children's cots and folding cots for
domestic use - Part 2 : Test methods (RM20) (ICS 97.140)
MS ISO 9098-1 : 2008 - Bunk beds for domestic use - Safety
requirements and tests - Part 1 : Safety requirements (RM10)
(ICS 97.140)
MS ISO 9098-2 : 2008 - Bunk beds for domestic use - Safety
requirements and tests - Part 2 : Test methods (RM20) (ICS
97.140)