NEWLY PUBLISHED MALAYSIAN STANDARDS - NOVEMBER 2009
01. Generalities. Terminology.
Standardization
MS ISO 128-50 : 2009 -
Technical drawings - General principles of presentation - Part 50
: Basic conventions for representing areas on cuts and sections
(RM110) (ICS 01.100.01)
MS ISO 5455 : 2009 - Technical drawings - Scales (RM80) (ICS
01.100.01)
MS ISO 9431 : 2009 - Construction drawings - Spaces for drawing
and for text, and title blocks on drawing sheets (RM110) (ICS
01.100.30)
MS ISO 10075 : 2009 -
Ergonomic principles related to mental work-load - General terms
and definitions (RM10) (ICS 13.180 / 01.040.13)
11. Health Care Technology
MS 2058 : 2009 - Code of
practice for good engineering maintenance management of active
medical devices (First revision) (RM70) (ICS 11.040.01)
13. Environment. Health
Protection. Safety
MS 2225 : 2009 - Eco-labelling criteria for biodegradable
cleaning agents (RM10) (ICS 13.020.50)
MS 2237 : 2009 - Eco-labelling criteria for electrical and
electronic equipment and components with restricted hazardous
substances (RM20) (ICS 13.020.50)
MS 2238 : 2009 - Industrial safety belts - Specification (First
revision) (RM20) (ICS 13.340.01)
MS 2257 : 2009 - Protective clothing - Determination of
resistance to penetration by sprayed liquid chemicals, emulsions
and dispersions - Atomizer test (RM20) (ICS 13.340.10)
MS ISO 9359 : 2009 - Air quality - Stratified sampling method for
assessment of ambient air quality (RM160) (ICS 13.040.20)
MS ISO 9920 : 2009 - Ergonomics of the thermal environment -
Estimation of thermal insulation and water vapour resistance of a
clothing ensemble (RM120) (ICS 13.180 / 61.020)
MS ISO 10075 : 2009 - Ergonomic principles related to mental
work-load - General terms and definitions (RM10) (ICS 13.180
/ 01.040.13)
MS ISO 10075-2 : 2009 - Ergonomic principles related to mental
workload - Part 2 : Design principles (RM20) (ICS 13.180)
MS ISO 11161 : 2009 - Safety of machinery - Integrated
manufacturing systems - Basic requirements (RM290) (ICS
13.110 / 25.040.01)
MS ISO 11222 : 2009 - Air quality - Determination of the
uncertainty of the time average of air quality measurements
(RM210) (ICS 13.040.01)
MS ISO 16009-9 : 2008 - Indoor air - Part 9 : Determination of
the emission of volatile organic compounds from building products
and furnishing - Emission test chamber method (RM180) (ICS
13.040.20)
19. Testing
MS IEC 60068-2-50 : 2009
- Basic environmental testing procedures - Part 2-50 : Tests -
Test Z/AFC : Combined cold / vibration (Sinusoidal) tests for
both heat-dissipating and non-heat-dissipating specimens (RM120) (ICS
19.040)
MS IEC 60068-2-53 : 2009 - Basic environmental testing procedures
- Part 2 : Tests - Guidance to tests Z/AFC and Z/BFC : Combined
temperature (cold and dry heat) and vibration (Sinusoidal) tests
(RM60) (ICS 19.040)
MS IEC 60068-2-55 : 2009 - Basic environmental testing procedures
- Part 2-55 : Tests - Test EE and guidance: Bounce (RM140) (ICS
19.040)
MS IEC 60068-2-64 : 2009 - Environmental testing - Part 2-64 :
Tests - Test FH : Vibration, broadband random and guidance
(RM330) (ICS 19.040)
21. Mechanical Systems and
Components for General Use
MS 2242 : 2009 - Automobile suspension springs - Strength test
methods (RM20) (ICS 21.160)
23. Fluid Systems and
Components for General Use
MS 2239 : 2009 - Gas cylinders - Cylinders for compressed and
liquefied gases (excluding acetylene) - Inspection at time of
filling (First revision) (RM20) (ICS 23.020.30)
MS 2253 : 2009 - Plastics piping systems - Elastomeric sealing
ring type joints and mechanical joints for thermoplastics
perssure piping - Test method for leaktightness under external
hydrostatic pressure (RM10) (ICS 23.040.60)
MS ISO 16528-1 : 2009 - Boilers and pressure vessels - Part 1 :
Performance requirements (RM200) (ICS 23.020.30 / 27.060.30)
MS ISO 16528-2 : 2009 -
Boilers and pressure vessels - Part 2 : Procedures for fulfilling
the requirements of ISO 16528-1 (RM130) (ICS 23.020.30 /
27.060.30)
25. Manufacturing Engineering
MS ISO 11161 : 2009 - Safety of machinery - Integrated
manufacturing systems - Basic requirements (RM290) (ICS
13.110 / 25.040.01)
27. Energy and Heat
Tranfer Engineering
MS 62557-1 : 2009 - Recommendations for small renewable energy
and hybrid systems for rural electrification - Part 1 : General
introduction to rural electrification (RM10) (ICS 27.160 /
27.180)
MS 62557-2 : 2009 - Recommendations for small renewable energy
and hybrid systems for rural electrification - Part 2 : From
requirements to a range of electrification systems (RM70) (ICS
27.160 / 27.180)
MS 62557-3 : 2009 - Recommendations for small renewable energy
and hybrid systems for rural electrification - Part 3 : Project
development and management (RM50) (ICS 27.160 / 27.180)
MS 62557-4 : 2009 - Recommendations for small renewable energy
and hybrid systems for rural electrification - Part 4 : System
selection and design (RM80) (ICS 27.160 / 27.180)
MS ISO 16528-1 : 2009 - Boilers and pressure vessels - Part 1 :
Performance requirements (RM200) (ICS 23.020.30 / 27.060.30)
MS ISO 16528-2 : 2009 -
Boilers and pressure vessels - Part 2 : Procedures for fulfilling
the requirements of ISO 16528-1 (RM130) (ICS 23.020.30 /
27.060.30)
29. Electrical Engineering
MS 45 : 2009 - Lead-acid starter batteries for automobiles -
Specification (Second revision) (RM40) (ICS 29.220.20)
MS 1239-2 : 2009 - Zinc or zinc alloy coated non-alloy steel wire
for armouring either power cables or telecommunication cables -
Part 2 : Submarine cables (First revision) (RM10) (ICS
29.060.20 / 77.140.65)
MS IEC 60079-27 : 2009 -
Explosive atmospheres - Part 27 : Fieldbus intrinsically safe
concept (FISCO) (First revision) (RM130) (ICS 29.260.20)
35. Information Technology. Office Machines
MS 2215 : 2009 -
Information technology - Biometric performance testing and
reporting - Part 3 : Modality - Specific testing (RM30) (ICS
35.040)
MS 2216 : 2009 - Information technology - Biometrics - Multimodal
and other multibiometric fusion (RM40) (ICS 35.040)
MS ISO/IEC 8825-1 : 2009 - Information technology - ASN .1
encoding rules - Part 1 : Specification of Basic Encoding Rules
(BER), Canonical Encoding Rules (CER) and Distinguished Encoding
Rules (DER) (RM310) (ICS 35.100.60)
MS ISO/IEC 8825-2 : 2009 - Information technology - ASN. 1
encoding rules - Part 2 : Specification of Packed encoding Rules
(PER) (RM480) (ICS 35.100.60)
MS ISO/IEC 8825-3 : 2009 - Information technology - ASN. 1
encoding rules - Part 3 : Specification of Encoding Control
Notation (ECN) (RM600) (ICS 35.100.60)
MS ISO/IEC 8825-4 : 2009 - Information technology - ASN. 1
encoding rules - Part 4 : XML Encoding Rules (XER) (RM510) (ICS
35.100.60)
MS ISO/IEC 8825-5 : 2009 - Information technology - ASN. 1
encoding rules - Part 5 : Mapping W3C XML schema definitions into
ASN. 1 (RM670) (ICS 35.100.60)
MS ISO/IEC 8825-6 : 2009 - Information technology - ASN. 1
encoding rules - Part 6 : Registration and application of PER
encoding instructions (RM200) (ICS 35.100.60)
MS ISO/IEC 13239 : 2009 - Information technology -
Telecommunications and information exchange between systems -
High-Level Data Link Control (HDLC) procedures (First revision)
(RM470) (ICS 35.100.20)
MS ISO/IEC 15940 : 2009 - Information technology - Software
engineering environment services (RM340) (ICS 35.080)
MS ISO/IEC 16085 : 2009 - Systems and software engineering - Life
cycle processes - Risk management (RM280) (ICS 35.080)
MS ISO/IEC 19770-1 : 2009 - Information technology - Software
asset management - Part 1 : Processes (RM240) (ICS 35.080)
MS ISO/IEC 23026 : 2009 - Software engineering - Recommended
practice for the internet - Web site engineering, web site
management and web site life cycle (RM380) (ICS 35.080)
MS ISO/IEC 24773 : 2009 - Software engineering - Certification of
software engineering professionals - Comparison framework (RM130)
(ICS 35.080)
MS ISO/IEC 24824-1 : 2009 - Information technology - Generic
applications of ASN. 1 - Part 1 : Fast infoset (RM410) (ICS
35.100.60)
MS ISO/IEC 24824-2 : 2009 - Information technology - Generic
applications of ASN. 1 - Part 2 : Fast web services (RM300) (ICS
35.100.60)
MS ISO/IEC 24824-3 : 2009 - Information technology - Generic
applications of ASN. 1 - Part 3 : Fast infoset security (RM170) (ICS
35.100.60)
MS ISO/IEC 26514 : 2009 - Systems and software engineering -
Requirements for designers and developers of user documentation
(RM470) (ICS 35.080)
MS ISO/IEC 26702 : 2009 - Systems engineering - Application and
management of the systems engineering process (RM410) (ICS
35.080)
MS ISO/IEC 29361 : 2009 - Information technology - Web services
interoperability - WS-I basic profile version 1.1 (RM340) (ICS
35.100.05)
MS ISO/IEC 38500 : 2009 - Corporate governance of information
technology (RM180) (ICS 35.080)
59. Textile and Leather
Technology
MS 2244 : 2009 - Test
method for moisture in cotton by oven-drying (RM50) (ICS
59.060)
61. Clothing Industry
MS 2019 : 2006 - Standard sizing systems for clothes (RM40) (ICS
61.020)
MS ISO 9920 : 2009 - Ergonomics of the thermal environment -
Estimation of thermal insulation and water vapour resistance of a
clothing ensemble (RM120) (ICS 13.180 / 61.020)
67. Food Technology
MS ISO 11027 : 2008 -
Pepper and pepper oleoresins - Determination of piperine content
- Method using high-performance liquid chromatography (RM110) (ICS
67.220.10)
75. Petroleum and Related Technologies
MS 2243-1 : 2009 -
Natural gas - Natural gas for use as a compressed fuel for
vehicles - Part 1 : Designation of the quality (First revision)
(RM30) (ICS 75.060)
MS 2243-2 : 2009 - Natural gas - Natural gas for use as a
compressed fuel for vehicles - Part 2 : Specification of the
quality (RM10) (ICS 75.060)
MS ISO 3448 : 2009 - Industrial liquid lubricants - ISO viscosity
classification (Second revision) (RM100) (ICS 75.100)
77. Metallurgy
MS 1239-2 : 2009 -
Zinc or zinc alloy coated non-alloy steel wire for armouring
either power cables or telecommunication cables - Part 2 :
Submarine cables (First revision) (RM10) (ICS 29.060.20 /
77.140.65)
MS 2240-2 :
2009 - Stainless steels for general purposes - Part 2 :
Semi-finished products, bars, rods and sections (RM40) (ICS
77.140.20)
83. Rubber and Plastics Industries
MS 1424 : 2009 - Test method for package yield of plastic
film (First revision) (RM40) (ICS 83.140.10)