oct 2009

NEWLY PUBLISHED MALAYSIAN STANDARDS - OCTOBER 2009

01. Generalities. Terminology. Standardization

MS 229 : 2009 - Nomenclature and common uses of Malaysian timbers (Second revision) (RM20) (ICS 01.040.79)

MS 1802 : 2008 - Structural timber grading - Requirements for machine strength graded timber and grading machines (RM30) (ICS 01.040.79)

11. Health Care Technology

MS 2227 : 2009 - Ultrasound in medical diagnostic - Code of practice of installation, testing and maintenance (RM20) (ICS 13.280 / 11.040)

MS 2228 : 2009 - Structural shielding design for medical x-ray imaging facilities - Guidelines (RM30) (ICS 11.040.55)

MS ISO 11979-5 : 2009 - Ophthalmic implants - Intraocular lenses - Part 5 : Biocompatibility (RM240) (ICS 11.040.70)

MS ISO 11979-6 : 2009 - Ophthalmic implants - Intraocular lenses - Part 6 : Shelf-life and transport stability (RM140) (ICS 11.040.70)

MS ISO 11979-8 : 2009 - Ophthalmic implants - Intraocular lenses - Part 8 : Fundamental requirements (RM100) (ICS 11.040.70)

MS ISO 11979-9 : 2009 - Ophthalmic implants - Intraocular lenses - Part 9 : Multifocal intraocular lenses (RM210) (ICS 11.040.70)

MS ISO 11979-10 : 2009 - Ophthalmic implants - Intraocular lenses - Part 10 : Phakic intraocular lenses (RM200) (ICS 11.040.70)

MS ISO 14729 : 2009 - Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses (RM230) (ICS 11.040.70)

MS ISO 14730 : 2009 - Ophthalmic optics - Contact lens care products - Antimicrobial preservative efficacy testing and guidance on determining discard date (RM230) (ICS 11.040.70)

13. Environment. Health Protection. Safety

MS 1804 : 2008 - Globally Harmonised System (GHS) for classification and labelling of chemicals - Specification for the classification, labelling and formulation of safety data sheet for chemical products (RM570) (ICS 71.100.30 / 13.300)

MS 1850 : Part 10 : 2006 - Water quality - Sampling - Part 10 : Guidance on sampling of waste waters (RM20) (ICS 13.060.45)

MS 1990 : Part 1 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 1 : General introduction (RM20) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 1 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 1 : Introduction to Part 2 - Purpose, scope, acceptance procedure, assignment procedure, example of test report (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 2 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 2 : Test series 1 (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 3 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 3 : Test series 2 (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 2227 : 2009 - Ultrasound in medical diagnostic - Code of practice of installation, testing and maintenance (RM20) (ICS 13.280 / 11.040)

MS 2263 : 2009 - Water quality - Determination of ammoniacal nitrogen - Distillation and titration method (RM20) (ICS 13.060.50)

MS ISO 7243 : 2009 - Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (Wet Bulb Globe Temperature) (RM20) (ICS 13.180)

MS ISO 7726 : 2009 - Ergonomics of the thermal environment - Instruments for measuring physical quantities (RM60) (ICS 13.180)

MS ISO 9241-410 : 2009 - Ergonomics of human-system interaction - Part 410 : Design criteria for physical input devices (RM110) (ICS 13.180 / 35.180)

MS ISO 10075-3 : 2009 - Ergonomic principles related to mental workload - Part 3 : Principles and requirements concerning methods for measuring and assessing mental workload (RM20) (ICS 13.180)

MS ISO 10551 : 2009 - Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales (RM30) (ICS 13.180)

MS ISO 11428 : 2009 - Ergonomics - Visual danger signals - General requirements, design and testing (RM20) (ICS 13.180 / 13.320)

MS ISO 20282-1 : 2009 - Ease of operation of everyday products - Part 1 : Design requirements for context of use and user characteristics (RM40) (ICS 13.180)

17. Metrology and Measurement. Physical phenomena

MS 2232-1 : 2009 - Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields - Part 1 : For frequency up to 30 kHz (RM30) (ICS 17.220.20)

19. Testing

MS 1990 : Part 1 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 1 : General introduction (RM20) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 1 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 1 : Introduction to Part 2 - Purpose, scope, acceptance procedure, assignment procedure, example of test report (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 2 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 2 : Test series 1 (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 3 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 3 : Test series 2 (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS IEC 60068-2-47 : 2009 - Environmental testing - Part 2-47 : Tests - Mounting of specimens for vibration, impact and similar dynamic tests (RM300) (ICS 19.040)

MS IEC 60068-2-51 : 2009 - Environmental testing - Part 2-51 : Tests - Test Z/BFc : Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (RM120) (ICS 19.040)

MS IEC 60068-2-57 : 2009 - Environmental testing - Part 2-57 : Tests - Test FF : Vibration - Time-history method (RM300) (ICS 19.040)

MS IEC 60068-2-59 : 2009 - Environmental testing - Part 2-59 : Test methods - Test FE : Vibration - Sine-beat method (RM250) (ICS 19.040)

21. Mechanical Systems and Components for General Use

MS ISO 8370-1 : 2009 - Belt drives - Dynamic test to determine pitch zone location - Part 1 : V-belts (RM100) (ICS 21.220.10)

MS ISO 8370-2 : 2009 - Belt drives - Dynamic test to determine pitch zone location - Part 2 : V-ribbed belts (RM80) (ICS 21.220.10)

MS ISO 11749 : 2009 - Belt drive - V-ribbed belts for the automotive industry - Fatigue test (RM130) (ICS 43.060.10 / 21.220.10)

23. Fluid Systems and Components for General Use

MS 1597-2-40 :2005 - Household and similar electrical appliances - Safety - Part 2-40 : Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (RM70) (ICS 23.120)

29. Electrical Engineering

MS IEC 60079-29-1 : 2009 - Explosive atmospheres - Part 29-1 : Gas detectors - Performance requirements of detectors for flammable gases (RM370) (ICS 29.260.20)

MS IEC 60079-29-2 : 2009 - Explosive atmospheres - Part 29-2 : Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen (RM540) (ICS 29.260.20)

MS IEC 60079-30-1 : 2009 - Explosive atmospheres - Part 30-1 : Electrical resistance trace heating - General and testing requirements (RM270) (ICS 29.260.20)

MS IEC 60079-30-2 : 2009 - Explosive atmospheres - Part 30-2 : Electrical resistance trace heating - Application guide for design, installation and maintenance (RM420) (ICS 29.260.20)

MS IEC 61800-7-203 : 2009 - Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification (RM590) (ICS 29.200 / 35.100.15)

MS IEC 61009-1 : 2005 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1 : General rules (First revision) (RM140) (ICS 29.120.50)

33. Telecommunications. Audio and Video Engineering

MS 301 489-3 : 2009 - Electromagnetic compatibility and radio spectrum matters (ERM); electromagnectic compatibility (EMC) standard for radio equipment and services - Part 3 : Specific conditions for short-range devices (SRD) operating on frequencies between 9 kHz and 40 gHz (RM30) (ICS 33.100)

MS IEC 61000-4-1 : 2009 - Electromagnetic compatibility (EMC) - Part 4-1 : Testing and measurement techniques - Overview of IEC 61000-4 series (First revision) (RM160) (ICS 33.100.01 / 33.100.20)

35. Information Technology. Office Machines

MS 1540-2 : 2009 - Information technology - Security techniques - A framework for IT security assurance - Part 2 : Assurance methods (RM70) (ICS 35.040)

MS ISO 9241-410 : 2009 - Ergonomics of human-system interaction - Part 410 : Design criteria for physical input devices (RM110) (ICS 13.180 / 35.180)

MS ISO/IEC 15939 : 2006 - Software engineering - Software measurement process (RM280) (ICS 35.080)

MS ISO/IEC 26300 : 2009 - Information technology - Open document format for office applications (OpenDocument) v1.0 (RM740) (ICS 35.240.30)

37. Image Technology

MS ISO 10109-6 : 2009 - Optics and photonics - Environmental requirements - Part 6 : Test requirements for medical optical instruments (RM110) (ICS 37.020)

43. Road vehicle Engineering

MS ISO 5287 : 2009 - Belt drives - Narrow V-belts for the automotive industry - Fatigue test (RM130) (ICS 43.060.10)

MS ISO 11154-1 : 2005 - Road vehicles - Roof load carriers - Part 1 : Roof bars (RM160) (ICS 43.040.60)

MS ISO 11749 : 2009 - Belt drive - V-ribbed belts for the automotive industry - Fatigue test (RM130) (ICS 43.060.10 / 21.220.10)

53. Materials Handling Equipment

MS 2093 : 2008 - Cranes and lifting appliances - Selection of wire ropes - Part 1 : General (RM30) (ICS 53.020.30)

59. Textile and Leather Technology

MS ISO 12956 : 2009 - Geotextiles and geotextile-related products - Determination of the characteristic opening size (RM160) (ICS 59.080.70)

MS ISO 12958 : 2009 - Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (RM170) (ICS 59.080.70)

MS ISO 13431 : 2009 - Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (RM180) (59.080.70)

65. Agriculture

MS 1203 : 2009 - Brush cutters - Specification - Safety requirements (First revision) (RM40) (ICS 65.060.80)

67. Food Technology

MS 1284 : 2008 - Soft, light and dark brown sugar - Specification (First revision) (RM10) (ICS 67.180.10)

MS 1500 : 2009 - Halal food - Production, preparation, handling and storage - General guidelines (Second revision) (RM20) (ICS 67.020)

MS 1500 : 2009 - Makanan halal - Pengeluaran, penyediaan, pengendalian dan penyimpanan - Garis panduan umum (Semakan kedua) (RM20) (ICS 67.020)

71. Chemical Technology

MS 1804 : 2008 - Globally Harmonised System (GHS) for classification and labelling of chemicals - Specification for the classification, labelling and formulation of safety data sheet for chemical products (RM570) (ICS 71.100.30 / 13.300)

MS 1990 : Part 1 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 1 : General introduction (RM20) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 1 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 1 : Introduction to Part 2 - Purpose, scope, acceptance procedure, assignment procedure, example of test report (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 2 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 2 : Test series 1 (RM30) (ICS 13.300 / 19.020 / 71.100.30)

MS 1990 : Part 2 : Section 3 : 2008 - Manual of tests and criteria for transport of dangerous goods - Part 2 : Classification procedures, test methods and criteria relating to explosives of class 1 - Section 3 : Test series 2 (RM30) (ICS 13.300 / 19.020 / 71.100.30)

75. Petroleum and Related Technologies

MS 1867 : 2009 - Test method for sulfur in petroleum gas by oxidative microcoulometry (First revision) (RM60) (ICS 75.200)

MS 2010 : 2006 - Test method for ASTM color of petroleum products (ASTM color scale) (RM50) (ICS 75.080)

MS 2011 : 2006 - Test method for acid number of petroleum products by potentiometric titration (RM50) (ICS 75.080)

MS 2012 : 2006 - Test method for vapor pressure of petroleum products (Reid method) (Second revision) (RM50) (ICS 75.080)

MS 2013 : 2006 - Test method for ash from petroleum products (Second revision) (RM40) (ICS 75.080)

MS 2233 : 2009 - Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (RM90) (ICS 75.180.20)

77. Metallurgy

MS 1137 : 2009 - Low carbon steel wires - Specification (First revision) (RM20) (ICS 77.140.65)

MS 2205 : 2008 - High strength steel castings for structural purposes - Specification (RM20) (ICS 77.140.80)

MS 2240-1 : 2009 - Stainless steels for general purposes - Part 1 : Flat products (RM40) (ICS 77.140.20)

79. Wood Technology

MS 2209 : 2009 - Structural laminated veneer lumber (LVL) - Performance requirements and minimum manufacturing requirements (RM30) (ICS 79.020)

81. Glass and Ceramics Industries

MS ISO 14703 : 2009 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders (First revision) (RM10) (ICS 81.060.30)

MS ISO 14704 : 2009 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature (First revision) (RM40) (ICS 81.060.30)

MS ISO 14705 : 2009 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (First revision) (RM30) (ICS 81.060.30)

MS ISO 23146 : 2009 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (RM20) (ICS 81.060.30)

83. Rubber and Plastics Industries

MS 281-3 : 2009 - Natural rubber latex concentrate - Part 3 : Determination of dry rubber content (Fourth revision) (RM10) (ICS 83.040.10)

MS 1477 : 2008 - Plastics - Polyethylene film and sheeting - Specification (First revision) (RM10) (ICS 83.140.10)

MS 1790 : 2008 - Plastics petri dishes for single use - Specification (RM20) (ICS 83.140.99)

MS 1904 : 2006 - Specification for polyethylene plastics molding and extrusion materials from recycled post-consumer (HDPE) sources (RM40) (ICS 83.140.01)

85. Paper Technology

MS 1801 : 2008 - Paper - Determination of zinc and cadmium (RM20) (ICS 85.060)

91. Construction Materials and Building

MS 26-1-1 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 1 : Sampling (Second revision) (RM10) (ICS 91.100.30)

MS 26-1-2 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 2 : Slump test (Second revision) (RM10) (ICS 91.100.30)

MS 26-1-3 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 3 : Vebe test (Second revision) (RM10) (ICS 91.100.30)

MS 26-1-4 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 4 : Degree of compactability (Second revision) (RM10) (ICS 91.100.30)

MS 26-1-5 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 5 : Flow table test (Second revision) (RM10) (ICS 91.100.30)

MS 26-1-6 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 6 : Density (Second revision) (RM10) (ICS 91.100.30)

MS 26-1-7 : 2009 - Testing of concrete - Part 1 : Fresh concrete - Section 7 : Air content - Pressure methods (Second revision) (RM20) (ICS 91.100.30)

MS 2210 : 2009 - LED enhanced road pavement markers (LED RPM) - Specification (RM20) (ICS 91.140.40)