Aug 2007

NEWLY PUBLISHED MALAYSIAN STANDARDS - SEPTEMBER 2007

01. Generalities. Terminology. Standardardization. Documentation.

MS 1932 : 2006 - Quantity of product in prepackages - Guidelines (RM30) (ICS 01.060)

03. Sociology. Services. Company Organization and Management. Administration. Transport.

MS 1970 : 2007 - Business continuity management - Framework (RM40) (ICS 03.100)

11. Health Care Technology

1. MS 1927 : Part 1 : 2006 - Packaging materials and systems for medical devices which are to be sterilized - Part 1 : General requirements and test methods (RM20) (ICS 11.080 / 55.040)

MS IEC 60601-2-7 : 2007 - Medical electrical equipment - Part 2-7 : Particular requirements for the safety of high-voltage generators of diagnostic x-ray generators (RM50) (ICS 11.040.50)

MS IEC 60601-2-44 : 2006 - Medical electrical equipment - Part 2-44 : Particular requirements for the safety of x-ray equipment for computed tomography (RM40) (ICS 11.040.50)

MS ISO 407 : 2006 - Small medical gas cylinders - Pin - Index yoke-Type valve connections (RM30) (ICS 11.040.10)

MS ISO 5361-4 : 2006 - Tracheal tubes - Part 4 : Cole type (RM90) (ICS 11.040.10)

MS ISO 8669-2 : 2006 - Urine collection bags - Part 2 : Requirements and test methods (RM180) (ICS 11.180.20)

13. Environmental and Health Protection. Safety

MS ISO 14063 : 2007 - Environmental management - Environmental communication - Guidelines and examples (RM40) (ICS 13.020.10)

MS ISO 14064-1 : 2006 - Greenhouse gases - Part 1 : Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removal (RM30) (ICS 13.020.40)

MS ISO 14064-2 : 2006 - Greenhouse gases - Part 2 : Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emissions reductions or removal enhancements (RM40) (ICS 13.020.40)

MS ISO 14064-3 : 2006 - Greenhouse gases - Part 3 : Specification with guidance for the validation and verification of greenhouse gas assertions (RM50) (ICS 13.020.40)

23. Fluid Systems and Components for General Use

MS 1058 : Part 4 : 2006 - Polyethylene (PE) piping systems for water supply - Part 4 : Fitness for purpose of the system (RM20) (ICS 23.040.20)

MS 1058 : Part 5 : 2006 - Polyethylene (PE) piping systems for water supply - Part 5 : Guidance for the assessment of conformity (RM20) (ICS 23.040.20 / 91.140.60)

MS ISO 6406 : 2006 - Gas cylinders - Seamless steel gas cylinders - Periodic inspection and testing (RM50) (ICS 23.020.30)

MS ISO 7225 : 2006 - Gas cylinders - Precautionary labels (RM20) (ICS 23.020.30)

25. Manufacturing Engineering

MS ISO 2380-1 : 2006 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1 : Tips for hand- and machine - operated screwdrivers (RM110) (25.140)

MS ISO 2380-2 : 2006 - Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : General requirements, lengths of blades and marking of hand - operated screwdrivers (First revision) (RM90) (25.140.01)

29. Electrical Engineering

MS IEC 60034-5 : 2006 - Rotating electrical machines - Part 5 : Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (RM290) (ICS 29.160)

MS IEC 60034-6 : 2006 - Rotating electrical machines - Part 6 : Methods of cooling (IC code)(RM210) (ICS 29.160)

MS IEC 60034-7 : 2006 - Rotating electrical machines - Part 7 : Classification of types of construction, mounting arrangements and terminal box position (IM code) (RM290) (ICS 29.160)

MS IEC 60034-8 : 2006 - Rotating electrical machines - Part 8 : Terminal markings and direction of rotation (RM300) (ICS 29.160. 01)

MS IEC 60079-7 : 2006 _ Explosive atmospheres - Part 7 : Equipment protection by increased safety "e" (First revision) (RM550) (ICS 29.260.20)

MS IEC 60079-11 : 2006 - Explosive atmospheres - Part 11 : Equipment protection by intrinsic safety "i" (RM600) (ICS 29.160.10)

MS IEC 60079-26 : 2006 - Explosive atmospheres - Part 26 : Equipment with equipment protection level (EPL) GA (First revision) (RM230) (ICS 29.260.20)

MS IEC 60079-27 : 2006 - Electrical apparatus for explosive gas atmospheres - Part 27 : Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO) (First revision) (RM150) (ICS 29.260.20)

MS IEC 60265-1 : 2006 - High - voltage switches - Part 1 : Switches for rates voltages above 1 kV and less than 52 kV (RM430) (ICS 29.130.10)

MS IEC 62019 : 2006 - Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contacts units (RM40) (ICS 29.120.50)

MS IEC 62271-105 : 2006 - High-voltage switchgear and controlgear - Part 105 : Alternating current switch-fuse combinations (RM380) (ICS 29.130.10)

MS IEC 62271- 201 : 2006 - High-voltage switchgear and controlgear - Part 201 : AC insulation - enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV (RM550) (ICS 29.130.10)

33. Telecommunications.

MS IEC 61000-4-34 : 2006 - Electromagnetic compatibility (EMC) - Part 4-34 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase (RM300) (ICS 33.100.20)

35. Information Technology. Office Equipment.

MS 1907 : 2006 - Information technology - Guide for MS ISO/IEC 12207 (Software life cycle processes (RM60) (ICS 35.080)

MS 1960 : Part 1 : 2007 - Multipurpose smart card - Part 1 : General characteristics - Code of practice (RM20) (ICS 35.240.15)

MS 1960 : Part 2 : 2007 - Multipurpose smart card - Part 2 : Data format for national ID application - Code of practice (RM20) (ICS 35.240.15)

MS ISO/IEC 17799 : 2005 - Information technology - Security techniques - Code of practice for information security management (First revision) (RM130) (ICS 35.040)

MS ISO/IEC 13888-1 : 2005 - IT security techniques - Non-repudiation : Part 1 : General (RM180) (ICS 35.040)

MS ISO/IEC 13888-2 : 2005 - Information technology - Security techniques - Non-repudiation - Part 2 : Mechanisms using symmetric techniques (RM140) (ICS 35.040)

MS ISO/IEC 13888-3 : 2005 - Information technology - Security techniques - Non-repudiation - Part 3 : Mechanisms using asymmetric techniques (RM120) (ICS 35.040)

MS ISO/IEC 18033-1 : 2005 - Information technology - Security techniques - Encryption algorithms - Part 1 : General (RM120) (ICS 35.040)

MS ISO/IEC 18033-3 : 2005 - Information technology - Security techniques - Encryption algorithms - Part 3 : Block ciphers (RM370) (ICS 35.040)

MS ISO/IEC 18033-4 : 2005 - Information technology - Security techniques - Encryption algorithms - Part 4 : Stream ciphers (RM290) (ICS 35.040)

43. Road Vehicle Engineering

MS 1884 : 2005 - Road vehicles - Protection of the driver against the steering mechanism in the event of impact - Specification (RM40) (ICS 43.040.01)

MS 1944 : Part 1 : 2006 - Passenger cars - Test track for a severe lane - Change manoeuvre - Part 1 : Double lane - change (RM10) (ICS 43.040.50)

MS 1909 : 2006 - Road vehicles - Small capacity vehicles with regard to their general construction - Specification (RM60) (ICS 43.080.20)

53. Materials Handling Equipment

MS ISO 10245-1 : 2006 - Cranes - Limiting and indicating devices - Part 1 : General (RM90) (ICS 53.020.20)

55. Packaging and Distribution of Goods

MS 1927 : Part 1 : 2006 - Packaging materials and systems for medical devices which are to be sterilized - Part 1 : General requirements and test methods (RM20) (ICS 11.080 / 55.040)

65. Agriculture

MS ISO 5983-1 : 2006 - Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1 : Kjeldahl method (second revision) (RM140 (ICS 65.120)

MS ISO 13903 : 2006 - Animal feeding stuffs - Determination of amino acids content (RM190) (ICS 65.120)

MS ISO 13904 : 2006 - Animal feeding stuffs - Determination of tryptophan content (RM140) (ICS 65.120)

71. Chemical Technology

MS 1920 : 2006 - Engine coolant - Ethylene glycol base for automobile and light duty service - Specification (RM10) (ICS 71.080)

MS 1921 : 2006 - Treatment of roof, ceiling and timber roof components with copper - chrome - arsenic preservatives for indoor above - ground use - specification (RM30) (ICS 71.100.50)

75. Petroleum and Related Technologies

MS 1077 : Part 9 : 2006 - Brake fluids - Test method - Part 9 : Compatibility (First revision) (RM10) (ICS 75.100)

MS 2004 : 2006 - Test method for oxidation stability of steam turbine oils by rotating pressure vessel (RM50) (ICS 75.100)

MS 2005 : 2006 - Test method for apparent viscosity of engine oils between -5 and -35 degrees Celsius using the cold - cranking simulator (RM50) (ICS 75.100)

MS 2009 : 2006 - Test method for pour point of petroleum products (RM50) (ICS 75.100)

MS 2017 : 2006 - Test method for determination of yield stress and apparent viscosity of engine oils at low temperature (RM50) (ICS 75.100)

MS 2018 : 2006 - Test method for measuring viscosity at high temperature by tapered bearing simulator (RM50) (ICS 75.100)

MS 2033 : 2006 - Test method for estimation of engine oil volatility by capillary gas chromatography (RM50) (ICS 75.100)

77. Metallurgy

MS 144 : 2006 - Cod reduced mild steel wire for the reinforcement of concrete - Specification (Third revision) (RM30) (ICS 77.140.15)

MS 145 : 2006 - Welded steel fabric for the reinforcement of concrete - Specification (Third revision) (RM20) (ICS 77.140.15)

MS 146 : 2006 - Hot rolled steel bars for the reinforcement of concrete - Specification (Third revision) (RM30) (ICS 77.140.15)

MS 2025 : Part 2 : 2006 - Cold formed sheet piling of non-alloy steels - Part 2 : Tolerances on shape and dimensions (RM10) (ICS 77.140.70)

MS ISO 11973 : 2007 - Heat - resistant cast steels and alloys for general applications (RM10) (ICS 77.140.80)

79. Wood Technology

MS 1912 : 2006 - Wood-based panels - Fibreboards - Specification (RM40) (ICS 79.060.20)

83. Rubber and Plastics Industries

MS ISO 13007-1 : 2005 - Ceramic tiles - Grouts and adhesives - Part 1 : Terms, definitions and specifications for adhesives (RM20) (ICS 83.180 / 91.100.23)

MS ISO 13007-2 : 2005 - Ceramic tiles - Grouts and adhesives - Part 2 : Test methods for adhesives (RM50) (ICS 83.180 / 91.100.23)

91. Construction Materials and Building

MS 1058 : Part 5 : 2006 - Polyethylene (PE) piping systems for water supply - Part 5 : Guidance for the assessment of conformity (RM20) (ICS 23.040.20 / 91.140.60)

MS 1918 : 2006 - Safety rules for the construction and installation of escalators and passenger conveyors (RM50) (ICS 91.140.90)

MS 1934 : Part 1 : 2007 - Methods of test for masonry - Part 1 : Determination of compressive strength (RM10) (ICS 91.080.30)

MS 1934 : Part 2 : 2007 - Methods of test for masonry - Part 2 : Determination of flexural strength (RM20) (ICS 91.080.30)

MS 1934 : Part 3 : 2007 - Methods of test for masonry - Part 3 : Determination of initial shear strength (RM20) (ICS 91.080.30)

MS 1934 : Part 4 : 2007 - Methods of test for masonry - Part 4 : Determination of shear strength including damp proof course (RM20) (ICS 91.080.30)

MS 1935 : 2007 - Masonry and masonry products methods for determining design thermal values (RM70) (ICS 91.080.30 / 91.120.10)

MS ISO 13007-1 : 2005 - Ceramic tiles - Grouts and adhesives - Part 1 : Terms, definitions and specifications for adhesives (RM20) (ICS 83.180 / 91.100.23)

MS ISO 13007-2 : 2005 - Ceramic tiles - Grouts and adhesives - Part 2 : Test methods for adhesives (RM50) (ICS 83.180 / 91.100.23)

MS ISO 13007-3 : 2005 - Ceramic tiles - Grouts and adhesives - Part 3 : Definitions and specifications for grouts (RM20) (ICS 91.100.91 / 91.100.23)

MS ISO 13007-4 : 2006 - Ceramic tiles - Grouts and adhesives - Part 4 : Test methods for grouts (RM30) (ICS 91.100.10 / 91.100.23)